domain trial software / shareware for linux

YAFPC-Appliance is a CD-ROM image based on KNOPPIX technology and the PDF composer/printer/mailer YAFPC.
Any PC booted from this CD can act as a PDF print server and provide an unlimited number of network shared virtual PDF printers. The system requirements are low. System configuration can be done via a Web browser from any workstation in your network.
Virtual shared printers can be configured to apply letterheads, watermarks, and appendices to all printed documents. After printing, a document is sent to its owner by email, or can be accessed in a shared folder on the server. Deployment is very simple.
Main features:
- No installation required: The YAFPC-Appliance CD-ROM contains a complete Operating System that can be booted on every PC. Automatic hardware recognition and automatic installation of all required software components are done without any user interaction.
- No client installation required: Each time a client accesses a network shared printer from the YAFPC-Appliance PDF Server the first time, the required printer driver is installed automatically to the clients workstation.
- No user account management required: Each time a user accesses a network shared printer from the YAFPC-Appliance PDF Server the first time, a user account is created "on the fly" and a network shared "home folder" is provided to this user. The user can access this folder to obtain her/his printed PDF documents. Also an email account is created "on the fly". The PDF document is additionally sent to this email account.
- Unlimited number of network shared PDF Printers: The YAFPC-Appliance administrator can create an unlimited number of network shared PDF Printers via the easy to use Browser Interface for Administration. Each PDF Printer can be configured to apply page numbers, special letterheads, watermarks and appendixes to each printed document and encrypt the document for protection against manipulations.
- Unlimited number of different letterheads, watermarks and appendixes: The YAFPC-Appliance administrator can upload multiple files to the YAFPC-Appliance PDF Server to be assigned to each PDF Printer for composing documents.
- Easy creation of email aliases: For printed documents to be sent to the printing user, the users email address is automatically created "on the fly" from her/his username and the given domain name. In case the usernames dont match their email addresses in a network, the YAFPC-Appliance administrator can create an email alias for each user. Aliases are of the form "alice: a.smith@foo.bar".
- Low system requirements: A PC with a Pentium 500 MHz, 256MB RAM and a 1GB Harddrive, a bootable CD-ROM drive and a network interface can act as a YAFPC-Appliance PDF Server in a network with hundreds of users to print and mail their documents. So any PC out of Your "heap of scrap" will do it.
Version restrictions:
- 30-day test license
Enhancements:
- A new "Install to Disk" function was added.
- The system can run as a live CD, installed on a hard disk, or in a virtual machine now.
- The file naming option for virtual printers can be set up to suppress original file extensions in document titles.

SocketMail Professional Edition is a professional e-mail server that enable you to do multi-domain hosting. From a single point of installation in a particular server, you can run virtually unlimited e-mail (and webmail) service. This is particularly useful if you are an e-mail service provider. SocketMail Pro require you to have a dedicated server and root access to install and configure.

We strongly suggest that you read through the whole page to get full understanding of SocketMail Pro components.

General Concept

SocketMail Pro is for serious e-mail service provider and therefore the main control of the whole system is called a Provider. The Provider manages domains on the server. Each domains are administrate by Webmaster.

Per server, there is only one (1) Provider and the Provider function is to provide service to all hosts/domains which the provider hosted. Each host then serve public or users. From this relationship, its clear that each node or members of the relationship have it own task and function. Therefore, provider will have Provider Console (via web browser) to administrate service for hosts/domains.

Host/Domain will have Webmaster Console (via web browser) to manage rights and functionality provided by provider plus to serve it users. End-user will have the web client interface to manage it mails and to utilize services and products provided by the provider via the host.

Components

The incoming mails are handled by integrating SocketMail with your servers MTA (see MTA Integration section below). The integration with your server existing MTA (such as Exim/Qmail/Sendmail/Postfix) to enable SocketMail to process incoming mails and deliver them to user mailboxes.

As of version 2.2.8, SocketMail Pro comes with POP3/SMTP daemon as well as implementation via xinetd/inetd service. You may offer accounts to send and receive emails via their favourite email client such as Outlook. If you are using the daemon, the POP3/SMTP server can be turned on/off from the admin page (unless your php is on safe-mode, then you need to do it manually). Simple and easy to run. However, you have alternative to implement the POP3/SMTP server via your servers xinetd/inetd service. Therefore there are two (2) ways of implementing the POP3/SMTP service, either using the daemon or via xinetd/inetd service. Using the xinetd/inetd service may have more advantage as you may define more parameters as provided by xinetd/inetd service, they dont need to be restarted when your machine restarted and the service is a bit faster too.

MTA Integration

SocketMail can be integrated with your existing MTA on your server such as Exim, Qmail, Postfix or Sendmail. The integration involves manual process of modifying the MTA configuration file. This require certain level of knowledge in managing your server system.

With MTA integration process, you may define selected domains to be receive and process by SocketMail engine whilst the rest of the domains on your server still continue to have their mails managed and process by the existing MTA.

POP3 Server

SocketMail POP3 server is implemented using your server Inetd or Xinetd service (a TCP wrapper).

You may want to define SocketMail POP3 server to listen to other port number so that it will not conflict with the standard port 110. Because of the nature of retrieval POP3 is based on user action, you can tell your user to configure their e-mail client to retrieve mails using the port number you defined rather than the standard port.

Using E-mail Client

Using SocketMail Pro, each domain (and it users) can be configured and defined if they can send and receive e-mails using their favourite e-mail clients such as Outlook, Eudora and TheBat. This definition need to be defined by the Provider (refer to General Concept section) to the particular domain. The sending of e-mail from an e-mail client is done by connecting to an Outgoing/Outbound SMTP server. The mail retrieves by an e-mail client is normally done via POP3 server. Therefore to enable this service, Not only the configuration in the Administrator Control Panel (Admin CP) of SocketMail need to be proper, the Outgoing SMTP and the POP3 server should be up and running on your server.

The POP3 service been touched in the section above and the Outgoing SMTP will be touch in the next section.

Outgoing SMTP

You need to set-up the SocketMails Outgoing SMTP using xinetd service in your server. Again, the port should be a different port number than port 25. Because of the nature of sending e-mail from e-mail client is based on user action, you can tell your user to configure their e-mail client to define the outgoing mail server and port number you defined rather than the standard port.

Euphoria is simple, flexible, and easy to learn. The project outperforms all popular interpreted languages. Complete Reference Manual included. Lots of free example programs with full source. Makes .EXE files.
Theres also a Euphoria To C Translator that gives really high speed. An easy-to-use database system is also included. The Web site has over 1200 contributed Euphoria programs with source.
Main features:
- Euphoria programs run on Windows, DOS, Linux, and FreeBSD.
- The language is flexible, powerful, and easy to learn.
- There is no waiting for compiles and links - just edit and run.
- You can create and distribute a royalty-free, stand-alone .exe file.
- Dynamic storage allocation is fundamental to Euphoria. Variables grow or shrink in size without the programmer having to worry about allocating and freeing chunks of memory. Elements of an array (Euphoria sequence) can be a dynamic mixture of different types and sizes of data.
- Euphoria provides extensive run-time error checking for: out-of-bounds subscripts, uninitialized variables, bad parameter values for library routines, illegal value assigned to a variable, and many more. If something goes wrong youll get a full error message, with a call traceback and a listing of variable values. With other languages youll typically get protection faults with useless dumps of machine registers and addresses.
- The Euphoria interpreter is more than 30 times faster than either Perl or Python, and its considerably faster than all other interpreted languages, according to the "Great Computer Language Shootout" benchmark (see demobenchbench.doc).
- If that isnt enough, theres a Euphoria To C Translator that can translate any Euphoria program to C, and boost your speed even more. Why waste time debugging hand-coded C/C++? You can easily develop a Euphoria program, and then generate the C code.
- Euphoria programs are not constrained by any 640K memory restrictions for which MS-DOS is infamous. All versions of Euphoria let you use all the memory on your system, and if that isnt enough, a swap file on disk will provide additional virtual memory.
- An integrated, easy-to-use, full-screen source-level debugger/tracer is included.
- Both an execution-count profiler, and a time profiler are available.
- There is a large and rapidly growing collection of excellent 3rd party programs and libraries, most with full source code.
- RDS has developed an extremely flexible database system (EDS) that is portable across all Euphoria platforms.
- The WIN32 implementation of Euphoria can access any WIN32 API routine, as well as C or Euphoria routines in .DLL files. A team of people has developed a Windows GUI library (Win32Lib), complete with a powerful Interactive Development Environment. You can design a user interface graphically, specify the Euphoria statements to be executed when someone clicks, and the IDE will create a complete Euphoria program for you. There are Windows Euphoria libraries for Internet access, 3-D games, and many other application areas.
- The DOS32 implementation of Euphoria on MS-DOS contains a built-in graphics library. If necessary, you can access DOS software interrupts. You can call machine-code routines. You can even set up your own hardware interrupt handlers. Many high-speed action games, complete with Sound Blaster sound effects, have been developed 100% in Euphoria, without the need for any machine code.
- The Linux and FreeBSD implementations of Euphoria let you access C routines and variables in shared libraries, for tasks ranging from graphics, to X windows GUI programming, to Internet CGI programming. The good news is, youll be programming in Euphoria, not C.
- A complete open source (Public Domain) Euphoria interpreter, written in Euphoria, is included in the download package. It can execute any Euphoria program on any platform. An optional high-performance C-coded back-end for this interpreter is available for just $79. See the Source License.

Hilbert II project is decentralised access to verified and readable mathematical knowledge. Advanced Link Manager runs on Mac OS X, Windows 98/2000/XP, and Linux. Almost all major search engines that exist today, rank a web page based on the number and the quality of links that point to that web page. Advanced Link Manager helps you monitor your incoming links, keeping you informed as to where they come from and what their content is.
With Advanced Link Manager you can also track your backlinks evolution in time. Some domains have various links to your site, distributed on various pages belonging to that domain, of which only a few bring you relevant traffic. You should be very interested that these important links stay where they are, so tracking their status becomes a necessity. Advanced Link Manages does this for you automatically, through its ability to create updatable reports and meaningful graphical charts.
Main features:
Manage incoming links
- Achieve top rankings in major search engines by managing your incoming links. Find out whether your referrers are keeping your link active.
We know who links to your competitors! Do you?
- Advanced Link Manager tracks the links to your site and shows who links to your competition, giving them an advantage in search engine placement.
Watch the evolution of your links
- Advanced Link Manager allows you to see how your website links evolve in time. You can compare the evolution of your site with the evolution of your competitors using data from the most popular search engines.
Version restrictions:
- 30 day trial