workstation setup
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 990
Gnome Workstation Command Center 0.9.8
GWCC allows users to execute network utilities (ping, nslookup, traceroute). more>>
GWCC allows users to execute network utilities (ping, nslookup, traceroute) and workstation commands (netstat, df, process grep) from a single tabbed window.
Welcome to GWCC.This program is designed to provide an easy to use interface to your Unix system. I dont know about you, but perform the same operations over-and-over day-after-day, and the command line provided via a terminal window ceases to be very useful once you want to start doing something with the information - like saving or printing it.
In addition to having to know all the flags for all the commands you want to use, you also have to scroll up-and-down the terminal window to retrace your steps and to cut-and-paste (what was that IP address again?).
So, i hope you will find my GTK/GNOME-based point-and-click application of some use in your daily computing activities. Please feel free to write to me with any suggestions you may have (see Contacting The Author below).
Main features:
- Complete preferences system (no need to edit any config files, or know flags)
- GNOME support (session management, dialogs, menus, etc.)
- LibGLADE support
- Saving and Printing of all output!
- Highly configurable command flags and program behaviour.
<<lessWelcome to GWCC.This program is designed to provide an easy to use interface to your Unix system. I dont know about you, but perform the same operations over-and-over day-after-day, and the command line provided via a terminal window ceases to be very useful once you want to start doing something with the information - like saving or printing it.
In addition to having to know all the flags for all the commands you want to use, you also have to scroll up-and-down the terminal window to retrace your steps and to cut-and-paste (what was that IP address again?).
So, i hope you will find my GTK/GNOME-based point-and-click application of some use in your daily computing activities. Please feel free to write to me with any suggestions you may have (see Contacting The Author below).
Main features:
- Complete preferences system (no need to edit any config files, or know flags)
- GNOME support (session management, dialogs, menus, etc.)
- LibGLADE support
- Saving and Printing of all output!
- Highly configurable command flags and program behaviour.
Download (0.17MB)
Added: 2006-06-22 License: GPL (GNU General Public License) Price:
1224 downloads
Packet filtering setup script
Packet filtering setup script by Anthony C. Zboralski. more>>
Packet filtering setup script by Anthony C. Zboralski. Adapted by Didi Damian for iptables version 1.0.0
Sample:
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# Set up variables
EXT_IF="eth0"
INT_IF="eth1"
EXT_IP=24.x.x.x/32
INT_IP=192.168.0.1/32
EXT_NET=24.x.x.0/24
INT_NET=192.168.0.0/24
MASQ_NETS="192.168.0.0/24"
LOCAL_ADDRS="127.0.0.0/8 192.168.0.1/32 24.x.x.x/32"
MAIL_RELAY=24.x.x.x/32
SMB_ACCESS="192.168.0.2/32"
SMB_BCAST="192.168.0.255/32"
# Turn on IP forwarding
echo Turning on IP forwarding.
echo 1 > /proc/sys/net/ipv4/ip_forward
# Load the ip_tables module
echo Loading ip_tables module.
/sbin/modprobe ip_tables || exit 1
# I let the kernel dynamically load the other modules
echo Flush standard tables.
iptables --flush INPUT
iptables --flush OUTPUT
iptables --flush FORWARD
echo Deny everything until firewall setup is completed.
iptables --policy INPUT DROP
iptables --policy OUTPUT DROP
iptables --policy FORWARD DROP
CHAINS=`iptables -n -L |perl -n -e /Chains+(S+)/ && !($1 =~ /^(INPUT|FORWARD|OUTPUT)$/) && print "$1 "`
echo Remove remaining chains:
echo $CHAINS
for chain in $CHAINS; do
iptables --flush $chain
done
# 2nd step cause of dependencies
for chain in $CHAINS; do
iptables --delete-chain $chain
done
for net in $MASQ_NETS; do
# I delete all the rules so you can rerun the scripts without bloating
# your nat entries.
iptables -D POSTROUTING -t nat -s $MASQ_NETS -j MASQUERADE 2>/dev/null
iptables -A POSTROUTING -t nat -s $MASQ_NETS -j MASQUERADE || exit 1
done
iptables --policy FORWARD ACCEPT
# Create a target for logging and dropping packets
iptables --new LDROP 2>/dev/null
iptables -A LDROP --proto tcp -j LOG --log-level info
--log-prefix "TCP Drop "
iptables -A LDROP --proto udp -j LOG --log-level info
--log-prefix "UDP Drop "
iptables -A LDROP --proto icmp -j LOG --log-level info
--log-prefix "ICMP Drop "
iptables -A LDROP --proto gre -j LOG --log-level info
--log-prefix "GRE Drop "
iptables -A LDROP -f -j LOG --log-level emerg
--log-prefix "FRAG Drop "
iptables -A LDROP -j DROP
# Create a table for watching some accepting rules
iptables --new WATCH 2>/dev/null
iptables -A WATCH -m limit -j LOG --log-level warn --log-prefix "ACCEPT "
iptables -A WATCH -j ACCEPT
echo Special target for local addresses:
iptables --new LOCAL 2>/dev/null
echo $LOCAL_ADDRS
for ip in $LOCAL_ADDRS; do
iptables -A INPUT --dst $ip -j LOCAL
# iptables -A INPUT --src $ip -i ! lo -j LDROP # lame spoof protect
done
echo Authorize mail from mail relay.
iptables -A LOCAL --proto tcp --syn --src $MAIL_RELAY --dst $EXT_IP --dport 25 -j ACCEPT
echo Authorizing samba access to:
echo $SMB_ACCESS
iptables --new SMB 2>/dev/null
for ip in $SMB_ACCESS; do
iptables -A SMB -s $ip -j ACCEPT
done
iptables -A LOCAL --proto udp -i ! $EXT_IF --dport 135:139 -j SMB
iptables -A LOCAL --proto tcp -i ! $EXT_IF --dport 135:139 -j SMB
iptables -A LOCAL --proto tcp -i ! $EXT_IF --dport 445 -j SMB
iptables -A INPUT -i ! $EXT_IF --dst $SMB_BCAST -j ACCEPT #lame samba broadcast
echo Drop and log every other incoming tcp connection attempts.
iptables -A LOCAL -i ! lo --proto tcp --syn --j LDROP
echo Authorize dns access for local nets.
for net in $MASQ_NETS 127.0.0.0/8; do
iptables -A INPUT --proto udp --src $net --dport 53 -j ACCEPT
done
echo Enforcing up ICMP policies, use iptables -L ICMP to check.
# If you deny all ICMP messages you head for trouble since it would
# break lots of tcp/ip algorythm (acz)
iptables --new ICMP 2>/dev/null
iptables -A INPUT --proto icmp -j ICMP
iptables -A ICMP -p icmp --icmp-type echo-reply -j ACCEPT
iptables -A ICMP -p icmp --icmp-type destination-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type network-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type host-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type protocol-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type port-unreachable -j ACCEPT
iptables -A ICMP -p icmp --icmp-type fragmentation-needed -j LDROP
iptables -A ICMP -p icmp --icmp-type source-route-failed -j WATCH
iptables -A ICMP -p icmp --icmp-type network-unknown -j WATCH
iptables -A ICMP -p icmp --icmp-type host-unknown -j WATCH
iptables -A ICMP -p icmp --icmp-type network-prohibited -j WATCH
iptables -A ICMP -p icmp --icmp-type host-prohibited -j WATCH
iptables -A ICMP -p icmp --icmp-type TOS-network-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type TOS-host-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type communication-prohibited -j WATCH
iptables -A ICMP -p icmp --icmp-type host-precedence-violation -j LDROP
iptables -A ICMP -p icmp --icmp-type precedence-cutoff -j LDROP
iptables -A ICMP -p icmp --icmp-type source-quench -j LDROP
iptables -A ICMP -p icmp --icmp-type redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type network-redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type host-redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type TOS-network-redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type TOS-host-redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type echo-request -j WATCH
iptables -A ICMP -p icmp --icmp-type router-advertisement -j LDROP
iptables -A ICMP -p icmp --icmp-type router-solicitation -j LDROP
iptables -A ICMP -p icmp --icmp-type time-exceeded -j WATCH
iptables -A ICMP -p icmp --icmp-type ttl-zero-during-transit -j WATCH
iptables -A ICMP -p icmp --icmp-type ttl-zero-during-reassembly -j WATCH
iptables -A ICMP -p icmp --icmp-type parameter-problem -j WATCH
iptables -A ICMP -p icmp --icmp-type ip-header-bad -j WATCH
iptables -A ICMP -p icmp --icmp-type required-option-missing -j WATCH
iptables -A ICMP -p icmp --icmp-type timestamp-request -j LDROP
iptables -A ICMP -p icmp --icmp-type timestamp-reply -j LDROP
iptables -A ICMP -p icmp --icmp-type address-mask-request -j LDROP
iptables -A ICMP -p icmp --icmp-type address-mask-reply -j LDROP
iptables -A ICMP -p icmp -j LDROP
echo Authorize tcp traffic.
iptables -A INPUT --proto tcp -j ACCEPT
echo Authorize packet output.
iptables --policy OUTPUT ACCEPT
#echo reject ident if you drop em you gotta wait for timeout
#iptables -I LOCAL --proto tcp --syn --dst $EXT_IP --dport 113 -j REJECT
echo Drop and log all udp below 1024.
iptables -A INPUT -i ! lo --proto udp --dport :1023 -j LDROP
echo Drop rpc dynamic udp port:
RPC_UDP=`rpcinfo -p localhost|perl -n -e /.*udps+(d+)s+/ && print $1,"n"|sort -u`
echo $RPC_UDP
for port in $RPC_UDP; do
iptables -A LOCAL -i ! lo --proto udp --dport $port -j LDROP
done
echo Authorize udp above 1024.
iptables -A INPUT --proto udp --dport 1024: -j ACCEPT
<<lessSample:
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# Set up variables
EXT_IF="eth0"
INT_IF="eth1"
EXT_IP=24.x.x.x/32
INT_IP=192.168.0.1/32
EXT_NET=24.x.x.0/24
INT_NET=192.168.0.0/24
MASQ_NETS="192.168.0.0/24"
LOCAL_ADDRS="127.0.0.0/8 192.168.0.1/32 24.x.x.x/32"
MAIL_RELAY=24.x.x.x/32
SMB_ACCESS="192.168.0.2/32"
SMB_BCAST="192.168.0.255/32"
# Turn on IP forwarding
echo Turning on IP forwarding.
echo 1 > /proc/sys/net/ipv4/ip_forward
# Load the ip_tables module
echo Loading ip_tables module.
/sbin/modprobe ip_tables || exit 1
# I let the kernel dynamically load the other modules
echo Flush standard tables.
iptables --flush INPUT
iptables --flush OUTPUT
iptables --flush FORWARD
echo Deny everything until firewall setup is completed.
iptables --policy INPUT DROP
iptables --policy OUTPUT DROP
iptables --policy FORWARD DROP
CHAINS=`iptables -n -L |perl -n -e /Chains+(S+)/ && !($1 =~ /^(INPUT|FORWARD|OUTPUT)$/) && print "$1 "`
echo Remove remaining chains:
echo $CHAINS
for chain in $CHAINS; do
iptables --flush $chain
done
# 2nd step cause of dependencies
for chain in $CHAINS; do
iptables --delete-chain $chain
done
for net in $MASQ_NETS; do
# I delete all the rules so you can rerun the scripts without bloating
# your nat entries.
iptables -D POSTROUTING -t nat -s $MASQ_NETS -j MASQUERADE 2>/dev/null
iptables -A POSTROUTING -t nat -s $MASQ_NETS -j MASQUERADE || exit 1
done
iptables --policy FORWARD ACCEPT
# Create a target for logging and dropping packets
iptables --new LDROP 2>/dev/null
iptables -A LDROP --proto tcp -j LOG --log-level info
--log-prefix "TCP Drop "
iptables -A LDROP --proto udp -j LOG --log-level info
--log-prefix "UDP Drop "
iptables -A LDROP --proto icmp -j LOG --log-level info
--log-prefix "ICMP Drop "
iptables -A LDROP --proto gre -j LOG --log-level info
--log-prefix "GRE Drop "
iptables -A LDROP -f -j LOG --log-level emerg
--log-prefix "FRAG Drop "
iptables -A LDROP -j DROP
# Create a table for watching some accepting rules
iptables --new WATCH 2>/dev/null
iptables -A WATCH -m limit -j LOG --log-level warn --log-prefix "ACCEPT "
iptables -A WATCH -j ACCEPT
echo Special target for local addresses:
iptables --new LOCAL 2>/dev/null
echo $LOCAL_ADDRS
for ip in $LOCAL_ADDRS; do
iptables -A INPUT --dst $ip -j LOCAL
# iptables -A INPUT --src $ip -i ! lo -j LDROP # lame spoof protect
done
echo Authorize mail from mail relay.
iptables -A LOCAL --proto tcp --syn --src $MAIL_RELAY --dst $EXT_IP --dport 25 -j ACCEPT
echo Authorizing samba access to:
echo $SMB_ACCESS
iptables --new SMB 2>/dev/null
for ip in $SMB_ACCESS; do
iptables -A SMB -s $ip -j ACCEPT
done
iptables -A LOCAL --proto udp -i ! $EXT_IF --dport 135:139 -j SMB
iptables -A LOCAL --proto tcp -i ! $EXT_IF --dport 135:139 -j SMB
iptables -A LOCAL --proto tcp -i ! $EXT_IF --dport 445 -j SMB
iptables -A INPUT -i ! $EXT_IF --dst $SMB_BCAST -j ACCEPT #lame samba broadcast
echo Drop and log every other incoming tcp connection attempts.
iptables -A LOCAL -i ! lo --proto tcp --syn --j LDROP
echo Authorize dns access for local nets.
for net in $MASQ_NETS 127.0.0.0/8; do
iptables -A INPUT --proto udp --src $net --dport 53 -j ACCEPT
done
echo Enforcing up ICMP policies, use iptables -L ICMP to check.
# If you deny all ICMP messages you head for trouble since it would
# break lots of tcp/ip algorythm (acz)
iptables --new ICMP 2>/dev/null
iptables -A INPUT --proto icmp -j ICMP
iptables -A ICMP -p icmp --icmp-type echo-reply -j ACCEPT
iptables -A ICMP -p icmp --icmp-type destination-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type network-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type host-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type protocol-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type port-unreachable -j ACCEPT
iptables -A ICMP -p icmp --icmp-type fragmentation-needed -j LDROP
iptables -A ICMP -p icmp --icmp-type source-route-failed -j WATCH
iptables -A ICMP -p icmp --icmp-type network-unknown -j WATCH
iptables -A ICMP -p icmp --icmp-type host-unknown -j WATCH
iptables -A ICMP -p icmp --icmp-type network-prohibited -j WATCH
iptables -A ICMP -p icmp --icmp-type host-prohibited -j WATCH
iptables -A ICMP -p icmp --icmp-type TOS-network-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type TOS-host-unreachable -j WATCH
iptables -A ICMP -p icmp --icmp-type communication-prohibited -j WATCH
iptables -A ICMP -p icmp --icmp-type host-precedence-violation -j LDROP
iptables -A ICMP -p icmp --icmp-type precedence-cutoff -j LDROP
iptables -A ICMP -p icmp --icmp-type source-quench -j LDROP
iptables -A ICMP -p icmp --icmp-type redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type network-redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type host-redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type TOS-network-redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type TOS-host-redirect -j LDROP
iptables -A ICMP -p icmp --icmp-type echo-request -j WATCH
iptables -A ICMP -p icmp --icmp-type router-advertisement -j LDROP
iptables -A ICMP -p icmp --icmp-type router-solicitation -j LDROP
iptables -A ICMP -p icmp --icmp-type time-exceeded -j WATCH
iptables -A ICMP -p icmp --icmp-type ttl-zero-during-transit -j WATCH
iptables -A ICMP -p icmp --icmp-type ttl-zero-during-reassembly -j WATCH
iptables -A ICMP -p icmp --icmp-type parameter-problem -j WATCH
iptables -A ICMP -p icmp --icmp-type ip-header-bad -j WATCH
iptables -A ICMP -p icmp --icmp-type required-option-missing -j WATCH
iptables -A ICMP -p icmp --icmp-type timestamp-request -j LDROP
iptables -A ICMP -p icmp --icmp-type timestamp-reply -j LDROP
iptables -A ICMP -p icmp --icmp-type address-mask-request -j LDROP
iptables -A ICMP -p icmp --icmp-type address-mask-reply -j LDROP
iptables -A ICMP -p icmp -j LDROP
echo Authorize tcp traffic.
iptables -A INPUT --proto tcp -j ACCEPT
echo Authorize packet output.
iptables --policy OUTPUT ACCEPT
#echo reject ident if you drop em you gotta wait for timeout
#iptables -I LOCAL --proto tcp --syn --dst $EXT_IP --dport 113 -j REJECT
echo Drop and log all udp below 1024.
iptables -A INPUT -i ! lo --proto udp --dport :1023 -j LDROP
echo Drop rpc dynamic udp port:
RPC_UDP=`rpcinfo -p localhost|perl -n -e /.*udps+(d+)s+/ && print $1,"n"|sort -u`
echo $RPC_UDP
for port in $RPC_UDP; do
iptables -A LOCAL -i ! lo --proto udp --dport $port -j LDROP
done
echo Authorize udp above 1024.
iptables -A INPUT --proto udp --dport 1024: -j ACCEPT
Download (MB)
Added: 2007-02-14 License: GPL (GNU General Public License) Price:
984 downloads
Crystal Audio 2.0
CrystalAudio is a FVWM-Crystal configuration tuned for use on an audio workstation. more>>
CrystalAudio is a FVWM-Crystal configuration tuned for use on an audio workstation. It has many new applications for the menu, including many sound-related applications and improved sound controls. The project launches qjackctl at startup.
The final goal of the project is to make the FVWM-Crystal menu compatible with the freedesktop specification and to provide some tools to generate the menu entries and icons from desktop and icon files provided by the applications in the system.
Enhancements:
- generate-fvwm-crystal-menu work with both new and old type application desktop files, so it is time for the 2.0 version.
- A lot of debugging have been done on that script: See the ChangeLog for the details.
- Added support for stalonetray in all the recipes.
<<lessThe final goal of the project is to make the FVWM-Crystal menu compatible with the freedesktop specification and to provide some tools to generate the menu entries and icons from desktop and icon files provided by the applications in the system.
Enhancements:
- generate-fvwm-crystal-menu work with both new and old type application desktop files, so it is time for the 2.0 version.
- A lot of debugging have been done on that script: See the ChangeLog for the details.
- Added support for stalonetray in all the recipes.
Download (3.2MB)
Added: 2007-03-20 License: GPL (GNU General Public License) Price:
954 downloads
Nautilus Setup Background 0.1
Nautilus Setup Background is a nautilus plugin to setup an image file as wallpaper when browse. more>>
Nautilus Setup Background is a nautilus plugin to setup an image file as wallpaper when browse.
<<less Download (0.24MB)
Added: 2007-06-06 License: GPL (GNU General Public License) Price:
872 downloads
Black Orion Enterprise Linux Workstation 4.3
Black Orion Network is an update and system management platform. more>>
Black Orion Network is an update and system management platform for among others Black Orions redhat-compatible Enterprise Linux Distributions. Black Orion Enterprise Linux software distributions are offered to you by the open source community as free software.
A program is free software if users are free to redistribute copies, either with or without modifications, either gratis or charging a fee for distribution, to anyone anywhere. Being free to do these things means (among other things) that you do not have to ask or pay for permission. Please feel free to make and redistribute as many copies of Black Orion Enterprise Linux as you like.
How It Works:
1. Obtain Black Orion Enterprise Linux
Obtain one of Black Orions redhat-compatible Enterprise Linux Distributions from the downloads section.
2. Burn cd images
Burn the downloaded iso images on to a cd.
3. Register yourself as a Black Orion Network Member
Register yourself as a member in the Black Orion Network section.
4. Install Black Orion on a computer
Read the manuals for the various installation options. The system can also be installed as a rhel4 virtual machine.
5. Connect your system to the Black Orion Network
Connect your system to the Black Orion Network with the up2date client installed on your system. You can find up2date by right-clicking the Black Orion Network Alert Icon on your desktop. Connect your system with your member name and password (see 3).
<<lessA program is free software if users are free to redistribute copies, either with or without modifications, either gratis or charging a fee for distribution, to anyone anywhere. Being free to do these things means (among other things) that you do not have to ask or pay for permission. Please feel free to make and redistribute as many copies of Black Orion Enterprise Linux as you like.
How It Works:
1. Obtain Black Orion Enterprise Linux
Obtain one of Black Orions redhat-compatible Enterprise Linux Distributions from the downloads section.
2. Burn cd images
Burn the downloaded iso images on to a cd.
3. Register yourself as a Black Orion Network Member
Register yourself as a member in the Black Orion Network section.
4. Install Black Orion on a computer
Read the manuals for the various installation options. The system can also be installed as a rhel4 virtual machine.
5. Connect your system to the Black Orion Network
Connect your system to the Black Orion Network with the up2date client installed on your system. You can find up2date by right-clicking the Black Orion Network Alert Icon on your desktop. Connect your system with your member name and password (see 3).
Download (168MB)
Added: 2006-05-16 License: Freely Distributable Price:
720 downloads
F-Prot Antivirus for Linux Workstations 4.6.7
F-Prot Antivirus for Linux Workstations in an FREE antivirus solution for Linux Workstations. more>>
F-Prot Antivirus security software package has various components that help keep your system secure from viruses, backdoors, trojans and other malicious programs. The project includes the RealTime Protector, a memory-resident monitoring utility that observes all files accessed on your system, a Scheduler where you can set the Scanner to make automatic scans or updates on your system at any time and an Updater to manage all signature updates.
For home users using the Linux open-source operating system, we offer F-Prot Antivirus for Linux Workstations. F-Prot Antivirus for Linux Workstations utilizes the renowned F-Prot Antivirus scanning engine for primary scan but has in addition to that a system of internal heuristics devised to search for unknown viruses
F-Prot Antivirus for Linux was especially developed to effectively eradicate viruses threatening workstations running Linux. It provides full protection against macro viruses and other forms of malicious software - including Trojans.
Main features:
- Scans for over 191534 known viruses and their variants
- Ability to perform scheduled scans when used with the cron utility
- Scans hard drives, CD-ROMS, diskettes, network drives, directories and specific files
- Scans for images of boot sector viruses, macro viruses and Trojan Horses
F-Prot Antivirus for Linux Workstations is FREE for use by personal users on personal workstations
<<lessFor home users using the Linux open-source operating system, we offer F-Prot Antivirus for Linux Workstations. F-Prot Antivirus for Linux Workstations utilizes the renowned F-Prot Antivirus scanning engine for primary scan but has in addition to that a system of internal heuristics devised to search for unknown viruses
F-Prot Antivirus for Linux was especially developed to effectively eradicate viruses threatening workstations running Linux. It provides full protection against macro viruses and other forms of malicious software - including Trojans.
Main features:
- Scans for over 191534 known viruses and their variants
- Ability to perform scheduled scans when used with the cron utility
- Scans hard drives, CD-ROMS, diskettes, network drives, directories and specific files
- Scans for images of boot sector viruses, macro viruses and Trojan Horses
F-Prot Antivirus for Linux Workstations is FREE for use by personal users on personal workstations
Download (2.8MB)
Added: 2006-12-04 License: Freeware Price:
1090 downloads
Mail::Toaster::Setup 5.05
Mail::Toaster::Setup is a Perl module with methods to configure and build all the components of a modern email server. more>>
Mail::Toaster::Setup is a Perl module with methods to configure and build all the components of a modern email server.
The meat and potatoes of toaster_setup.pl. This is where the majority of the work gets done. Big chunks of the code and logic for getting all the various applications and scripts installed and configured resides in here.
METHODS
All documented methods in this package (shown below) accept two optional arguments, debug and fatal. Setting debug to zero will supress nearly all informational and debugging output. If you want more output, simply pass along debug=>1 and status messages will print out. Fatal allows you to override the default behaviour of these methods, which is to die upon error. Each sub returns 0 if the action failed and 1 for success.
arguments required:
varies (most require conf)
arguments optional:
debug - print status messages
fatal - die on errors (default)
result:
0 - failure
1 - success
Examples:
1. $setup->apache( debug=>0, fatal=>0 );
Try to build apache, do not print status messages and do not die on error(s).
2. $setup->apache( debug=>1 );
Try to build apache, print status messages, die on error(s).
3. if ( $setup->apache( ) { print "yay!n" };
Test to see if apache installed correctly.
<<lessThe meat and potatoes of toaster_setup.pl. This is where the majority of the work gets done. Big chunks of the code and logic for getting all the various applications and scripts installed and configured resides in here.
METHODS
All documented methods in this package (shown below) accept two optional arguments, debug and fatal. Setting debug to zero will supress nearly all informational and debugging output. If you want more output, simply pass along debug=>1 and status messages will print out. Fatal allows you to override the default behaviour of these methods, which is to die upon error. Each sub returns 0 if the action failed and 1 for success.
arguments required:
varies (most require conf)
arguments optional:
debug - print status messages
fatal - die on errors (default)
result:
0 - failure
1 - success
Examples:
1. $setup->apache( debug=>0, fatal=>0 );
Try to build apache, do not print status messages and do not die on error(s).
2. $setup->apache( debug=>1 );
Try to build apache, print status messages, die on error(s).
3. if ( $setup->apache( ) { print "yay!n" };
Test to see if apache installed correctly.
Download (0.83MB)
Added: 2007-02-28 License: Perl Artistic License Price:
968 downloads
Example netfilter setup 0.1
Example netfilter setup contains a simple example on how to setup netfilter. more>>
Example netfilter setup contains a simple example on how to setup netfilter.
Warning this is experimental, I dont garantee this is 100% secure, it just does the work fine for me and i thought it could be a good jumpstart for people new to netfilter.
Now I am waiting for your corrections, suggestions and critics. Also I am gonna write a small addon for setting up dynamic rules cause i am tired of all these programs with dynamics port like bind, xdm and rpc.
Btw nmap -sU will still report udp dropping port as open.
nmap -sU -p 111 192.168.1.1
<<lessWarning this is experimental, I dont garantee this is 100% secure, it just does the work fine for me and i thought it could be a good jumpstart for people new to netfilter.
Now I am waiting for your corrections, suggestions and critics. Also I am gonna write a small addon for setting up dynamic rules cause i am tired of all these programs with dynamics port like bind, xdm and rpc.
Btw nmap -sU will still report udp dropping port as open.
nmap -sU -p 111 192.168.1.1
Download (MB)
Added: 2007-02-14 License: GPL (GNU General Public License) Price:
986 downloads
YateAdmin 1
YateAdmin is a FREE powerful web interface which helps to set up the telephony engine Yate. more>>
YateAdmin is a FREE powerful web interface which helps to set up the telephony engine Yate.
You can use it to setup:
- Users lines
- Register to other servers
- Routes for gateways
- Fallback routing
- Call Detail Report
- Yate status
<<lessYou can use it to setup:
- Users lines
- Register to other servers
- Routes for gateways
- Fallback routing
- Call Detail Report
- Yate status
Download (0.058MB)
Added: 2006-10-04 License: GPL (GNU General Public License) Price:
1120 downloads
System Health Monitor 0.8
System Health Monitor for Linux is a handy python program that will setup your system to generate RRD Graphs. more>>
System Health Monitor for Linux is a handy python program that will setup your system to generate RRD Graphs of network interface traffic, system load, memory usage, disk space and inode usage and graphs of the number of running processes.
System Health Monitor features a user-friendly interactive configuration mode and auto-generated html pages. Just point your web server to the health_html directory to get an overview of the status of your machine. You can see examples of it in operation here on my machine and on KPLUG.org
<<lessSystem Health Monitor features a user-friendly interactive configuration mode and auto-generated html pages. Just point your web server to the health_html directory to get an overview of the status of your machine. You can see examples of it in operation here on my machine and on KPLUG.org
Download (0.017MB)
Added: 2006-08-03 License: GPL (GNU General Public License) Price:
1182 downloads
Salocin Linux 0.1.18
Salocin Linux is a free operating system that can be optimized and customized for almost any application or need. more>>
Salocin Linux is a free operating system that can be optimized and customized for almost any application or need. Extreme configurability, performance and a top-notch user and developer community are our goals.
The Salocin Linux Project is a worldwide community program sponsored by VIR0S that promotes the use of Linux for all applications. The program provides free and easy access to a whole new world of possibilities for your computing needs. Here you will find a community of users and developers, who all have the same goal in mind—to create and distribute the worlds best Linux distribution.
Salocin is an ideal secure server, development workstation, or professional desktop -- whatever you need it to be, because of its near-unlimited adaptability.
<<lessThe Salocin Linux Project is a worldwide community program sponsored by VIR0S that promotes the use of Linux for all applications. The program provides free and easy access to a whole new world of possibilities for your computing needs. Here you will find a community of users and developers, who all have the same goal in mind—to create and distribute the worlds best Linux distribution.
Salocin is an ideal secure server, development workstation, or professional desktop -- whatever you need it to be, because of its near-unlimited adaptability.
Download (MB)
Added: 2007-05-21 License: GPL (GNU General Public License) Price:
887 downloads
stygmorgan 0.27
stygmorgan is a musical instrument, is an Interactive Musical Workstation software emulator. more>>
stygmorgan is a musical instrument, is an Interactive Musical Workstation software emulator, fully configurable, but in fact does not produce any kind of sound, using the ALSA 1 sequencer sends MIDI messages to external sound fonts.
stygmorgan is a Linux project developed in C++ using the Fast Light Toolkit FLTK 2 and hope is very intuitive and easy to use.
stygmorgan is oriented to musical students and amateur musicians. With their chord sequencer is the fast way to create style based songs to practice.
stygmorgan means:
- sty From Style, because is capable to import many files in different Musical Style formats.
- gm General MIDI, because is released to use with a General Midi compatible sound font.
- organ Because all the Interactive Musical Keyboard Workstation, when i was young was called organs.
Main features:
- Real time tracks.
- Imports .sty, .prs, and .mid musical style file formats.
- 32 chords recognized in all the possible inversions.
- Fingered Bass, use the low note of the chord to play the bass.
- Three melody simultaneous sounds, Two chord simultaneous sounds.
- Program Change change patterns and/or sounds.
- Synchronized start when recognizes a chord.
- Solo, Mutes, Reverberation, Chorus, Volume, Pan, Program, Bank, Octave and Transpose controls for each mixer channel.
- Fully configurable for use any kind of external sound font.
- Fully editable styles, patterns, sounds, recordings.
- Chord sequencer.
- 16 tracks patterns, seven simultaneous, chords are mandatory for play tracks.
<<lessstygmorgan is a Linux project developed in C++ using the Fast Light Toolkit FLTK 2 and hope is very intuitive and easy to use.
stygmorgan is oriented to musical students and amateur musicians. With their chord sequencer is the fast way to create style based songs to practice.
stygmorgan means:
- sty From Style, because is capable to import many files in different Musical Style formats.
- gm General MIDI, because is released to use with a General Midi compatible sound font.
- organ Because all the Interactive Musical Keyboard Workstation, when i was young was called organs.
Main features:
- Real time tracks.
- Imports .sty, .prs, and .mid musical style file formats.
- 32 chords recognized in all the possible inversions.
- Fingered Bass, use the low note of the chord to play the bass.
- Three melody simultaneous sounds, Two chord simultaneous sounds.
- Program Change change patterns and/or sounds.
- Synchronized start when recognizes a chord.
- Solo, Mutes, Reverberation, Chorus, Volume, Pan, Program, Bank, Octave and Transpose controls for each mixer channel.
- Fully configurable for use any kind of external sound font.
- Fully editable styles, patterns, sounds, recordings.
- Chord sequencer.
- 16 tracks patterns, seven simultaneous, chords are mandatory for play tracks.
Download (2.6MB)
Added: 2006-08-16 License: GPL (GNU General Public License) Price:
1165 downloads
Actim 0.1 Alpha
Actim is a program which provides the ability to transfer files and execute commands via e-mail. more>>
Actim is a program which provides the ability to transfer files and execute commands via e-mail.
Actim allows you to send and retrieve files, and to call command line programs on a target machine via emails. The application can handle both synchronous and asynchronous requests with basic security features.
It has both command line and graphical user interfaces. This can be useful if, for example, your home PC does not have any access to your office workstation which is behind the company firewall.
<<lessActim allows you to send and retrieve files, and to call command line programs on a target machine via emails. The application can handle both synchronous and asynchronous requests with basic security features.
It has both command line and graphical user interfaces. This can be useful if, for example, your home PC does not have any access to your office workstation which is behind the company firewall.
Download (0.67MB)
Added: 2007-03-05 License: GPL (GNU General Public License) Price:
963 downloads
Tin 1.8.2
Tin is a full-screen easy to use Netnews reader. more>>
Tin project is a full-screen easy to use Netnews reader.
It can read news locally (i.e., /var/spool/news) or remotely (rtin or tin -r option) via a NNTP (Network News Transport Protocol) server.
It will automatically utilize NOV (News OVerview) style index files if available locally or via the NNTP XOVER command.
Quick Install:
configure to your local setup (have a look at):
./configure --help (or ./conf-tin)
check your local setup in:
include/autoconf.h
compile with:
make build (or cd src; make)
install with:
make install
Install at your own risk.
Enhancements:
- A few possible buffer overflows were fixed.
<<lessIt can read news locally (i.e., /var/spool/news) or remotely (rtin or tin -r option) via a NNTP (Network News Transport Protocol) server.
It will automatically utilize NOV (News OVerview) style index files if available locally or via the NNTP XOVER command.
Quick Install:
configure to your local setup (have a look at):
./configure --help (or ./conf-tin)
check your local setup in:
include/autoconf.h
compile with:
make build (or cd src; make)
install with:
make install
Install at your own risk.
Enhancements:
- A few possible buffer overflows were fixed.
Download (1.8MB)
Added: 2006-04-26 License: GPL (GNU General Public License) Price:
1282 downloads
Pocket Linux 2.51
Pocket Linux is an almost minimal, one floppy linux system designed to quickly convert PC workstation into a secure linux. more>>
Pocket Linux is an almost minimal, one floppy linux system designed to quickly convert PC workstation into secure linux-based workstation using ssh to connect to remote host (other networking clients are also supported).
It supports bootp for determining host IP and other network parameters (theres also manual configuration possible, but bootp is recommended).
In addition to workstations equipped with a network card (ethernet or arcnet), you can also use Pocket Linux on a PC equipped with a modem. Modem is automatically detected and then PPP connection is made.
The idea came up some time in 1996 or so. The distribution then was not perfect, but still it shown it was a great idea. It wasnt maintained for about year or so, until I took it up again in the early January 1998. After a complete rebuild Pocket Linux 2.00 was released. It soon gained a huge number of happy users, whose ideas helped its development.
The aim is to provide a small and efficient workstation that autoconfigures as much as possible and lets securely use the network from almost everywhere.
Current version is a nice attempt and future ones will enhance the automation and support for various network equipment and protocols, becoming a total solution. Future plans also include side projects like one floppy router.
In order to understand some of the config options its useful to know something about operations that are done during bootup (in order to automatically configure the network). These are, in order (the later attempts are made if the earlier ones dont set-up the network):
- attempt to setup the network using BOOTP
- attempt to reuse previous manual configuration
- modem detection
- attempt to setup modem conection
Most of the config options switches these operations on and off.
Main menu
You can choose the following network configuration commands from the main menu (only the ones that make sense in the present context are displayed):
- Options - allows setting few binary parameters controlling automatic network configuration and modem handling.
- BOOTP query - attempts to configure network (ethernet or arcnet) using BOOTP. Normally its automatically done during bootup, but this can be switched off.
- Manual configuration - allows manual setting of network configuration parameters (ethernet or arcnet).
- Detect modem - detects serial port the modem is on and its parameters (transfer rate, initialization commands).
- Dial PPP using predefined configuration - creates modem connection (PPP) using one of (up to ten) remembered configurations. By default only TPSA (0202122) configuration is remembered.
- Dial PPP using new configuration - creates new PPP configuration and sets up a modem connection using the newly created config.
- Disconnect PPP - disconnects modem connection.
- Mount /usr via NFS - mounts remote /usr filesystem via NFS. It will be automatically mounted during each Pocket Linux bootup if its turned on in configuration options.
- Exit - Do not config the network - exits the program without configuring the network.
Configuration options
There are following options available:
- Probe network with BOOTP - switches automatic BOOTP probing during bootup on and off. On by default.
- Reuse manual network configs - if on, an attempt is made to restore network configuration during bootup. Netconf remembers 10 most recent manual configurations along with network cards MAC addresses. If cards MAC address matches one of the remembered ones, assigned configuration is used. On by default.
- Automatically setup PPP - switches automatic attempt to create modem connection during bootup on and off. Its made with the first config on PPP configs list. On by default.
- Reuse modem configuration - if on, modem detection is not performed during bootup - instead most recently used modem configuration is used. Off by default.
- Pulse dialing - switches dialing mode used for modem connections between tone dialing (DTMF) and pulse dialing. Default is off (that is tone dialing).
- Automount disk partitions - switches on and off automatical disk partitions mounting (ext2 and vfat filesystems) and swap partition activation during bootup. On by default.
- Add swap file if low memory - switches on and off automatical swap file creation during bootup. Swap file is created if, and only if, theres less than 16 MB memory available (including potentially activated swap partitions) and theres a disk partition on which it could be created available. On by default.
- Automount NFS /usr - switches on and off /usr filestem mounting via NFS during bootup. NFS path to the filestem must be set using "Mount /usr filesystem via NFS" command in main menu. Off by default.
Manual network card configuration
You can enter network configuration parameters in this window:
- This machines IP - enter IP number for this computer here
- Network mask - enter netmask here. If omitted, mask will be calculated based on IP (which will not necessarily be right).
- Broadcast address - enter network broadcast address here. If omitted broadcast address will be calculated based on IP (not mask! - which will not necessarily be right).
- Default gateway - enter IP address of default network gateway (router) here.
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
PPP configuration
You can enter modem connection configuration parameters in this window:
- Config name - config name (used in existing configuration selection menu).
- Phone number - phone number to dial (eg. 0w202122 for TPSA access modems).
- Username - username to send to remote server
- Password - password to send to remote server
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
Because of permanent configuration that is kept on the floppy you should remember to:
- dont write protect the floppy
- dont remove the floppy from the drive (at least during network configuration)
Enhancements:
- bugfixes in netconf reuse code
- disk partitions automounting, swap partitions autoactivating
- automatic swap file creation
- extended support for NFS mountable /usr
- PS/2 mouse support
- new startup logo
<<lessIt supports bootp for determining host IP and other network parameters (theres also manual configuration possible, but bootp is recommended).
In addition to workstations equipped with a network card (ethernet or arcnet), you can also use Pocket Linux on a PC equipped with a modem. Modem is automatically detected and then PPP connection is made.
The idea came up some time in 1996 or so. The distribution then was not perfect, but still it shown it was a great idea. It wasnt maintained for about year or so, until I took it up again in the early January 1998. After a complete rebuild Pocket Linux 2.00 was released. It soon gained a huge number of happy users, whose ideas helped its development.
The aim is to provide a small and efficient workstation that autoconfigures as much as possible and lets securely use the network from almost everywhere.
Current version is a nice attempt and future ones will enhance the automation and support for various network equipment and protocols, becoming a total solution. Future plans also include side projects like one floppy router.
In order to understand some of the config options its useful to know something about operations that are done during bootup (in order to automatically configure the network). These are, in order (the later attempts are made if the earlier ones dont set-up the network):
- attempt to setup the network using BOOTP
- attempt to reuse previous manual configuration
- modem detection
- attempt to setup modem conection
Most of the config options switches these operations on and off.
Main menu
You can choose the following network configuration commands from the main menu (only the ones that make sense in the present context are displayed):
- Options - allows setting few binary parameters controlling automatic network configuration and modem handling.
- BOOTP query - attempts to configure network (ethernet or arcnet) using BOOTP. Normally its automatically done during bootup, but this can be switched off.
- Manual configuration - allows manual setting of network configuration parameters (ethernet or arcnet).
- Detect modem - detects serial port the modem is on and its parameters (transfer rate, initialization commands).
- Dial PPP using predefined configuration - creates modem connection (PPP) using one of (up to ten) remembered configurations. By default only TPSA (0202122) configuration is remembered.
- Dial PPP using new configuration - creates new PPP configuration and sets up a modem connection using the newly created config.
- Disconnect PPP - disconnects modem connection.
- Mount /usr via NFS - mounts remote /usr filesystem via NFS. It will be automatically mounted during each Pocket Linux bootup if its turned on in configuration options.
- Exit - Do not config the network - exits the program without configuring the network.
Configuration options
There are following options available:
- Probe network with BOOTP - switches automatic BOOTP probing during bootup on and off. On by default.
- Reuse manual network configs - if on, an attempt is made to restore network configuration during bootup. Netconf remembers 10 most recent manual configurations along with network cards MAC addresses. If cards MAC address matches one of the remembered ones, assigned configuration is used. On by default.
- Automatically setup PPP - switches automatic attempt to create modem connection during bootup on and off. Its made with the first config on PPP configs list. On by default.
- Reuse modem configuration - if on, modem detection is not performed during bootup - instead most recently used modem configuration is used. Off by default.
- Pulse dialing - switches dialing mode used for modem connections between tone dialing (DTMF) and pulse dialing. Default is off (that is tone dialing).
- Automount disk partitions - switches on and off automatical disk partitions mounting (ext2 and vfat filesystems) and swap partition activation during bootup. On by default.
- Add swap file if low memory - switches on and off automatical swap file creation during bootup. Swap file is created if, and only if, theres less than 16 MB memory available (including potentially activated swap partitions) and theres a disk partition on which it could be created available. On by default.
- Automount NFS /usr - switches on and off /usr filestem mounting via NFS during bootup. NFS path to the filestem must be set using "Mount /usr filesystem via NFS" command in main menu. Off by default.
Manual network card configuration
You can enter network configuration parameters in this window:
- This machines IP - enter IP number for this computer here
- Network mask - enter netmask here. If omitted, mask will be calculated based on IP (which will not necessarily be right).
- Broadcast address - enter network broadcast address here. If omitted broadcast address will be calculated based on IP (not mask! - which will not necessarily be right).
- Default gateway - enter IP address of default network gateway (router) here.
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
PPP configuration
You can enter modem connection configuration parameters in this window:
- Config name - config name (used in existing configuration selection menu).
- Phone number - phone number to dial (eg. 0w202122 for TPSA access modems).
- Username - username to send to remote server
- Password - password to send to remote server
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
Because of permanent configuration that is kept on the floppy you should remember to:
- dont write protect the floppy
- dont remove the floppy from the drive (at least during network configuration)
Enhancements:
- bugfixes in netconf reuse code
- disk partitions automounting, swap partitions autoactivating
- automatic swap file creation
- extended support for NFS mountable /usr
- PS/2 mouse support
- new startup logo
Download (1.44MB)
Added: 2005-05-11 License: GPL (GNU General Public License) Price:
1640 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above workstation setup search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
