vmware workstation 5.0
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 477
Gnome Workstation Command Center 0.9.8
GWCC allows users to execute network utilities (ping, nslookup, traceroute). more>>
GWCC allows users to execute network utilities (ping, nslookup, traceroute) and workstation commands (netstat, df, process grep) from a single tabbed window.
Welcome to GWCC.This program is designed to provide an easy to use interface to your Unix system. I dont know about you, but perform the same operations over-and-over day-after-day, and the command line provided via a terminal window ceases to be very useful once you want to start doing something with the information - like saving or printing it.
In addition to having to know all the flags for all the commands you want to use, you also have to scroll up-and-down the terminal window to retrace your steps and to cut-and-paste (what was that IP address again?).
So, i hope you will find my GTK/GNOME-based point-and-click application of some use in your daily computing activities. Please feel free to write to me with any suggestions you may have (see Contacting The Author below).
Main features:
- Complete preferences system (no need to edit any config files, or know flags)
- GNOME support (session management, dialogs, menus, etc.)
- LibGLADE support
- Saving and Printing of all output!
- Highly configurable command flags and program behaviour.
<<lessWelcome to GWCC.This program is designed to provide an easy to use interface to your Unix system. I dont know about you, but perform the same operations over-and-over day-after-day, and the command line provided via a terminal window ceases to be very useful once you want to start doing something with the information - like saving or printing it.
In addition to having to know all the flags for all the commands you want to use, you also have to scroll up-and-down the terminal window to retrace your steps and to cut-and-paste (what was that IP address again?).
So, i hope you will find my GTK/GNOME-based point-and-click application of some use in your daily computing activities. Please feel free to write to me with any suggestions you may have (see Contacting The Author below).
Main features:
- Complete preferences system (no need to edit any config files, or know flags)
- GNOME support (session management, dialogs, menus, etc.)
- LibGLADE support
- Saving and Printing of all output!
- Highly configurable command flags and program behaviour.
Download (0.17MB)
Added: 2006-06-22 License: GPL (GNU General Public License) Price:
1224 downloads
Black Orion Enterprise Linux Workstation 4.3
Black Orion Network is an update and system management platform. more>>
Black Orion Network is an update and system management platform for among others Black Orions redhat-compatible Enterprise Linux Distributions. Black Orion Enterprise Linux software distributions are offered to you by the open source community as free software.
A program is free software if users are free to redistribute copies, either with or without modifications, either gratis or charging a fee for distribution, to anyone anywhere. Being free to do these things means (among other things) that you do not have to ask or pay for permission. Please feel free to make and redistribute as many copies of Black Orion Enterprise Linux as you like.
How It Works:
1. Obtain Black Orion Enterprise Linux
Obtain one of Black Orions redhat-compatible Enterprise Linux Distributions from the downloads section.
2. Burn cd images
Burn the downloaded iso images on to a cd.
3. Register yourself as a Black Orion Network Member
Register yourself as a member in the Black Orion Network section.
4. Install Black Orion on a computer
Read the manuals for the various installation options. The system can also be installed as a rhel4 virtual machine.
5. Connect your system to the Black Orion Network
Connect your system to the Black Orion Network with the up2date client installed on your system. You can find up2date by right-clicking the Black Orion Network Alert Icon on your desktop. Connect your system with your member name and password (see 3).
<<lessA program is free software if users are free to redistribute copies, either with or without modifications, either gratis or charging a fee for distribution, to anyone anywhere. Being free to do these things means (among other things) that you do not have to ask or pay for permission. Please feel free to make and redistribute as many copies of Black Orion Enterprise Linux as you like.
How It Works:
1. Obtain Black Orion Enterprise Linux
Obtain one of Black Orions redhat-compatible Enterprise Linux Distributions from the downloads section.
2. Burn cd images
Burn the downloaded iso images on to a cd.
3. Register yourself as a Black Orion Network Member
Register yourself as a member in the Black Orion Network section.
4. Install Black Orion on a computer
Read the manuals for the various installation options. The system can also be installed as a rhel4 virtual machine.
5. Connect your system to the Black Orion Network
Connect your system to the Black Orion Network with the up2date client installed on your system. You can find up2date by right-clicking the Black Orion Network Alert Icon on your desktop. Connect your system with your member name and password (see 3).
Download (168MB)
Added: 2006-05-16 License: Freely Distributable Price:
720 downloads
Crystal Audio 2.0
CrystalAudio is a FVWM-Crystal configuration tuned for use on an audio workstation. more>>
CrystalAudio is a FVWM-Crystal configuration tuned for use on an audio workstation. It has many new applications for the menu, including many sound-related applications and improved sound controls. The project launches qjackctl at startup.
The final goal of the project is to make the FVWM-Crystal menu compatible with the freedesktop specification and to provide some tools to generate the menu entries and icons from desktop and icon files provided by the applications in the system.
Enhancements:
- generate-fvwm-crystal-menu work with both new and old type application desktop files, so it is time for the 2.0 version.
- A lot of debugging have been done on that script: See the ChangeLog for the details.
- Added support for stalonetray in all the recipes.
<<lessThe final goal of the project is to make the FVWM-Crystal menu compatible with the freedesktop specification and to provide some tools to generate the menu entries and icons from desktop and icon files provided by the applications in the system.
Enhancements:
- generate-fvwm-crystal-menu work with both new and old type application desktop files, so it is time for the 2.0 version.
- A lot of debugging have been done on that script: See the ChangeLog for the details.
- Added support for stalonetray in all the recipes.
Download (3.2MB)
Added: 2007-03-20 License: GPL (GNU General Public License) Price:
954 downloads
F-Prot Antivirus for Linux Workstations 4.6.7
F-Prot Antivirus for Linux Workstations in an FREE antivirus solution for Linux Workstations. more>>
F-Prot Antivirus security software package has various components that help keep your system secure from viruses, backdoors, trojans and other malicious programs. The project includes the RealTime Protector, a memory-resident monitoring utility that observes all files accessed on your system, a Scheduler where you can set the Scanner to make automatic scans or updates on your system at any time and an Updater to manage all signature updates.
For home users using the Linux open-source operating system, we offer F-Prot Antivirus for Linux Workstations. F-Prot Antivirus for Linux Workstations utilizes the renowned F-Prot Antivirus scanning engine for primary scan but has in addition to that a system of internal heuristics devised to search for unknown viruses
F-Prot Antivirus for Linux was especially developed to effectively eradicate viruses threatening workstations running Linux. It provides full protection against macro viruses and other forms of malicious software - including Trojans.
Main features:
- Scans for over 191534 known viruses and their variants
- Ability to perform scheduled scans when used with the cron utility
- Scans hard drives, CD-ROMS, diskettes, network drives, directories and specific files
- Scans for images of boot sector viruses, macro viruses and Trojan Horses
F-Prot Antivirus for Linux Workstations is FREE for use by personal users on personal workstations
<<lessFor home users using the Linux open-source operating system, we offer F-Prot Antivirus for Linux Workstations. F-Prot Antivirus for Linux Workstations utilizes the renowned F-Prot Antivirus scanning engine for primary scan but has in addition to that a system of internal heuristics devised to search for unknown viruses
F-Prot Antivirus for Linux was especially developed to effectively eradicate viruses threatening workstations running Linux. It provides full protection against macro viruses and other forms of malicious software - including Trojans.
Main features:
- Scans for over 191534 known viruses and their variants
- Ability to perform scheduled scans when used with the cron utility
- Scans hard drives, CD-ROMS, diskettes, network drives, directories and specific files
- Scans for images of boot sector viruses, macro viruses and Trojan Horses
F-Prot Antivirus for Linux Workstations is FREE for use by personal users on personal workstations
Download (2.8MB)
Added: 2006-12-04 License: Freeware Price:
1090 downloads
VMware Server 1.0.3 Build 44356
VMware Server is a robust yet easy to use product for users new to server virtualization technology. more>>
VMware Server product is a robust yet easy to use software for users new to server virtualization technology.
VMware Server enables companies to partition a physical server into multiple virtual machines, and to start experiencing the benefits of virtualization.
Benefits of VMware Server
Provision a new server in minutes without investing in new hardware.
Run Windows and Linux operating systems and applications on the same physical server.
Increase the utilization of a physical server.
Move virtual machines from one physical host to another without re-configuration.
With VMware Server you can:
Streamline software development and testing by allowing developers to create multiple environments with different operating systems on the same server.
Evaluate software in ready-to-run virtual machines without installation and configuration.
Re-host legacy operating systems such as Windows NT Server 4.0 and Windows 2000 Server in a virtual machine running on new hardware and operating system.
Simplify server provisioning by building a virtual machine once and deploying it multiple times.
Leverage pre-built, ready-to-run virtual appliances that include virtual hardware, operating system and application environments. Virtual appliances for Web, email, proxy and other infratructure services are available for download from the VMTN Virtual Machine Center.
VMware Server is the first step to VMware Virtual Infrastructure
While VMware Server is a compelling product for new virtualization users, VMware Virtual Infrastructure products-ESX Server with Virtual SMP and VirtualCenter with VMotion-enable companies to implement large-scale production server consolidation, business continuity, and enterprise desktop solutions with enterprise-class performance, high availability, manageability and security. View a comparison between VMware Server and VMware Virtual Infrastructure.
Enhancements:
- This release fixes four security vulnerabilities, as reported in CVE-2007-1337, CVE-2007-1877, CVE-2007-1069, and CVE-2007-1876.
- These vulnerabilities permitted denial of service, crashes of Windows guests, or corrupted stack pointers.
- A problem with VMware Tools that caused the guest to run out of memory was fixed.
- A crash in the VIX API was resolved.
- Building of the kernel and the HGFS modules was improved.
- Several occasional crashes were fixed.
<<lessVMware Server enables companies to partition a physical server into multiple virtual machines, and to start experiencing the benefits of virtualization.
Benefits of VMware Server
Provision a new server in minutes without investing in new hardware.
Run Windows and Linux operating systems and applications on the same physical server.
Increase the utilization of a physical server.
Move virtual machines from one physical host to another without re-configuration.
With VMware Server you can:
Streamline software development and testing by allowing developers to create multiple environments with different operating systems on the same server.
Evaluate software in ready-to-run virtual machines without installation and configuration.
Re-host legacy operating systems such as Windows NT Server 4.0 and Windows 2000 Server in a virtual machine running on new hardware and operating system.
Simplify server provisioning by building a virtual machine once and deploying it multiple times.
Leverage pre-built, ready-to-run virtual appliances that include virtual hardware, operating system and application environments. Virtual appliances for Web, email, proxy and other infratructure services are available for download from the VMTN Virtual Machine Center.
VMware Server is the first step to VMware Virtual Infrastructure
While VMware Server is a compelling product for new virtualization users, VMware Virtual Infrastructure products-ESX Server with Virtual SMP and VirtualCenter with VMotion-enable companies to implement large-scale production server consolidation, business continuity, and enterprise desktop solutions with enterprise-class performance, high availability, manageability and security. View a comparison between VMware Server and VMware Virtual Infrastructure.
Enhancements:
- This release fixes four security vulnerabilities, as reported in CVE-2007-1337, CVE-2007-1877, CVE-2007-1069, and CVE-2007-1876.
- These vulnerabilities permitted denial of service, crashes of Windows guests, or corrupted stack pointers.
- A problem with VMware Tools that caused the guest to run out of memory was fixed.
- A crash in the VIX API was resolved.
- Building of the kernel and the HGFS modules was improved.
- Several occasional crashes were fixed.
Download (101.7MB)
Added: 2007-05-02 License: Freeware Price:
1821 downloads
VMware Player 2.0.0 Build 45731
VMware Player can be used by anyone to run virtual machines on a Linux PC. more>> <<less
Download (63.8MB)
Added: 2007-05-09 License: Freeware Price:
2872 downloads
Firedraw 1.0
Firedraw permits administration of a networks firewalls through a graphical Web interface. more>>
Firedraw permits administration of a networks firewalls through a graphical Web interface.
It makes firewall rules according to objects and services created by the user, which can be of different types, such as a workstation, a domain, a network, etc.
<<lessIt makes firewall rules according to objects and services created by the user, which can be of different types, such as a workstation, a domain, a network, etc.
Download (0.51MB)
Added: 2006-07-12 License: GPL (GNU General Public License) Price:
1200 downloads
Remind 3.1.0
Remind is a sophisticated calendar and alarm program. more>>
Remind is a sophisticated calendar and alarm program.
Remind also includes scripts for making a nice WWW calendar server.
Main features:
- A sophisticated scripting language and intelligent handling of exceptions and holidays.
- Plain-text, PostScript and HTML output.
- Timed reminders and pop-up alarms.
- A friendly graphical front-end for people who dont want to learn the scripting language.
- Facilities for both the Gregorian and Hebrew calendars.
- Support for 12 different languages.
Enhancements:
- A FROM clause has been added to the Remind scripting language; this is the counterpart to UNTIL.
- A new DATETIME datatype lets you manipulate a date and time as a single unified object.
- The SPECIAL COLOR and SPECIAL HTML reminders sort with normal reminders.
- TkRemind can email you reminders if you leave your workstation unattended.
- There are several other minor enhancements and bugfixes.
<<lessRemind also includes scripts for making a nice WWW calendar server.
Main features:
- A sophisticated scripting language and intelligent handling of exceptions and holidays.
- Plain-text, PostScript and HTML output.
- Timed reminders and pop-up alarms.
- A friendly graphical front-end for people who dont want to learn the scripting language.
- Facilities for both the Gregorian and Hebrew calendars.
- Support for 12 different languages.
Enhancements:
- A FROM clause has been added to the Remind scripting language; this is the counterpart to UNTIL.
- A new DATETIME datatype lets you manipulate a date and time as a single unified object.
- The SPECIAL COLOR and SPECIAL HTML reminders sort with normal reminders.
- TkRemind can email you reminders if you leave your workstation unattended.
- There are several other minor enhancements and bugfixes.
Download (0.29MB)
Added: 2007-08-15 License: GPL (GNU General Public License) Price:
986 downloads
Ardour 2.0.5
Ardour is a professional multitrack/multichannel audio recorder and DAW for Linux. more>>
Ardour project is a digital audio workstation. You can use it to record, edit and mix multi-track audio. Produce your own CDs. Mix video soundtracks. Experiment with new ideas about music and sound. Generate sound installations for 12 speaker gallery shows. Have Fun.
Ardour capabilities include: multichannel recording, non-linear, non-destructive region based editing with unlimited undo/redo, full automation support, a mixer whose capabilities rival high end hardware consoles, lots of plugins to warp, shift and shape your music, and controllable from hardware control surfaces at the same time as it syncs to timecode.
If youve been looking for a tool similar to ProTools, Nuendo, Cubase SX, Digital Performer, Samplitude or Sequoia, you might have found it.
<<lessArdour capabilities include: multichannel recording, non-linear, non-destructive region based editing with unlimited undo/redo, full automation support, a mixer whose capabilities rival high end hardware consoles, lots of plugins to warp, shift and shape your music, and controllable from hardware control surfaces at the same time as it syncs to timecode.
If youve been looking for a tool similar to ProTools, Nuendo, Cubase SX, Digital Performer, Samplitude or Sequoia, you might have found it.
Download (1.3MB)
Added: 2007-08-05 License: GPL (GNU General Public License) Price:
537 downloads
SlaBuntuVMware 0.2
SlaBuntuVMware is a useful installation suite for installing VMware Server on Slackware or Ubuntu. more>>
SlaBuntuVMware is a useful installation suite for installing VMware Server on Slackware or Ubuntu.
The project automatically downloads packages from the VMware site.
Tested on Slackware 11. (Slackware 10.2 might not work - try)
Tested on Ubuntu Desktop Dapper Drake and Ubuntu Desktop Edgy.
IMPORTANT: this suite does not include the vmware server packs,
they are downloaded from the official VMware site.
You also need a server key for activating the product that you must
get (for free) from the VMware web-site (http://www.vmware.com/server/)
INSTALLATION (Slackware Linux) :
a) 1- The perfect setup for running vmware on Slackware is:
Slackware 11 (When you install the OS leave a big partion for your
virtual machines).
Using a good server with an hardware raid controller:
Suggested Partition Table (scsi disks, if ide hda):
/dev/sda1 swap (megs?gb? depends on your system)
/dev/sda2 / 10Gb
/dev/sda3 /home 2Gb
/dev/sda4 /vm (160 Gb the rest for your virtual machines)
You must do a normal install with X support but no KDE.
2- Dropline Gnome (http://www.droplinegnome.net)
It is suggested you run gnome on Slackware 11. Gnome is not
included in the distro cds, therefore you must download
Dropline Gnome.
3- Kernel 2.6.x (with the kernel sources into /usr/src/linux)
(Default Kernel 2.4.33.3 works perfectly though)
CAUTION: take a look on www.vmware.com for the
supported kernel 2.6 versions.
OR
- If you have problems building 2.6.x vmware kernel module, just use
the normal 2.4.33.3 kernel supplied with your slackware, or try the test26.s
or huge26.s supplied with your slackware cds.
b) - The base setup for running vmware on Slackware is:
1- Slackware 11
2- Kde(not tested can have problems with some libraries)
(if you do not want to Download and install Dropline Gnome)
3- Kernel 2.4.33 (with the kernel sources into /usr/src/linux)
Using a normal pc with no raid controller (so you should use linux
raid software):
Suggested Partition Table (scsi disks, if ide hda):
/dev/md1 swap (megs?gb? depends on your system)
/dev/md2 / 10Gb
/dev/md3 /home 2Gb
/dev/md4 /vm (100 Gb? the rest for your virtual machines)
---------------------------------------------------------------------------
If you do not want to use Gnome or Kde go at the end of this file.
---------------------------------------------------------------------------
2) After making sure you have everything (including the kernel sources
inside /usr/src/linux) you can run:
3) as root ./setup.sh
4) follow the steps provided
(you can hit ENTER to most of the questions (90%)
4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)
6) under an X session: Run the command "vmware" and Enjoy vmware!
INSTALLATION (Ubuntu Desktop, Alternate,NOT Server):
1) edit /etc/apt/sources.list and uncomment all the lines starting with deb
2) open a terminal (xterm) and type "sudo ./setup.sh"
3) follow the steps provided
(you can hit ENTER to most of the questions (90%)
4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)
5) Run the command "vmware" and Enjoy vmware!
INSTALLATION ON UBUNTU SERVER
- Not tried yet, but you should at first download and install X11 and gnome
and then follow the steps provided for Ubuntu Desktop above.
IMPORTANT INFO:
- Remember that vmware server packs are downloaded from the official vmware
site and are property of the VMware Company: http://www.vmware.com/
- Remember that in order to use VMware you should accept the terms of the
VMware license that will be displayed during the installation process.
- Remember that in order to installa VMware you should ask the VMware
fellows for a key. Do this at the VMware site: http://www.vmware.com/
- To create virtual machines you should use the vmware console.
a) Run the command "vmware" and the vmware console starts up.
b) Then connect to localhost.
- After created a virtual machine to run it from the cmd line use:
bash# vmware-cmd vmname.vmx start
Author: Lorenzo Allori
#####################################################
If you do not have Gnome or Kde youll need the following:
#####################################################
- Slack with glibc and glibcsolibs installed. Make sure you
have X11 installed with a window manager.
Packages needed are:
glibc-2.3.6-i486-6.tgz
glibc-solibs-2.3.6-i486-6.tgz
kernel-source-2.4.33.3-noarch-1.tgz
x11-6.9.0-i486-11.tgz
x11-devel-6.9.0-i486-11.tgz
windowmaker-0.92.0-i486-1.tgz
You can find those on http://www.slackware.com.
Download them and to install those just type (as root):
# installpkg pkgname
When you have finished installing all the packages you need remember to run:
# ldconfig
- If you need a window manager you can install windowmaker:
# installpkg windowmaker-0.92-i486.tgz
# wmaker.inst
<<lessThe project automatically downloads packages from the VMware site.
Tested on Slackware 11. (Slackware 10.2 might not work - try)
Tested on Ubuntu Desktop Dapper Drake and Ubuntu Desktop Edgy.
IMPORTANT: this suite does not include the vmware server packs,
they are downloaded from the official VMware site.
You also need a server key for activating the product that you must
get (for free) from the VMware web-site (http://www.vmware.com/server/)
INSTALLATION (Slackware Linux) :
a) 1- The perfect setup for running vmware on Slackware is:
Slackware 11 (When you install the OS leave a big partion for your
virtual machines).
Using a good server with an hardware raid controller:
Suggested Partition Table (scsi disks, if ide hda):
/dev/sda1 swap (megs?gb? depends on your system)
/dev/sda2 / 10Gb
/dev/sda3 /home 2Gb
/dev/sda4 /vm (160 Gb the rest for your virtual machines)
You must do a normal install with X support but no KDE.
2- Dropline Gnome (http://www.droplinegnome.net)
It is suggested you run gnome on Slackware 11. Gnome is not
included in the distro cds, therefore you must download
Dropline Gnome.
3- Kernel 2.6.x (with the kernel sources into /usr/src/linux)
(Default Kernel 2.4.33.3 works perfectly though)
CAUTION: take a look on www.vmware.com for the
supported kernel 2.6 versions.
OR
- If you have problems building 2.6.x vmware kernel module, just use
the normal 2.4.33.3 kernel supplied with your slackware, or try the test26.s
or huge26.s supplied with your slackware cds.
b) - The base setup for running vmware on Slackware is:
1- Slackware 11
2- Kde(not tested can have problems with some libraries)
(if you do not want to Download and install Dropline Gnome)
3- Kernel 2.4.33 (with the kernel sources into /usr/src/linux)
Using a normal pc with no raid controller (so you should use linux
raid software):
Suggested Partition Table (scsi disks, if ide hda):
/dev/md1 swap (megs?gb? depends on your system)
/dev/md2 / 10Gb
/dev/md3 /home 2Gb
/dev/md4 /vm (100 Gb? the rest for your virtual machines)
---------------------------------------------------------------------------
If you do not want to use Gnome or Kde go at the end of this file.
---------------------------------------------------------------------------
2) After making sure you have everything (including the kernel sources
inside /usr/src/linux) you can run:
3) as root ./setup.sh
4) follow the steps provided
(you can hit ENTER to most of the questions (90%)
4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)
6) under an X session: Run the command "vmware" and Enjoy vmware!
INSTALLATION (Ubuntu Desktop, Alternate,NOT Server):
1) edit /etc/apt/sources.list and uncomment all the lines starting with deb
2) open a terminal (xterm) and type "sudo ./setup.sh"
3) follow the steps provided
(you can hit ENTER to most of the questions (90%)
4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)
5) Run the command "vmware" and Enjoy vmware!
INSTALLATION ON UBUNTU SERVER
- Not tried yet, but you should at first download and install X11 and gnome
and then follow the steps provided for Ubuntu Desktop above.
IMPORTANT INFO:
- Remember that vmware server packs are downloaded from the official vmware
site and are property of the VMware Company: http://www.vmware.com/
- Remember that in order to use VMware you should accept the terms of the
VMware license that will be displayed during the installation process.
- Remember that in order to installa VMware you should ask the VMware
fellows for a key. Do this at the VMware site: http://www.vmware.com/
- To create virtual machines you should use the vmware console.
a) Run the command "vmware" and the vmware console starts up.
b) Then connect to localhost.
- After created a virtual machine to run it from the cmd line use:
bash# vmware-cmd vmname.vmx start
Author: Lorenzo Allori
#####################################################
If you do not have Gnome or Kde youll need the following:
#####################################################
- Slack with glibc and glibcsolibs installed. Make sure you
have X11 installed with a window manager.
Packages needed are:
glibc-2.3.6-i486-6.tgz
glibc-solibs-2.3.6-i486-6.tgz
kernel-source-2.4.33.3-noarch-1.tgz
x11-6.9.0-i486-11.tgz
x11-devel-6.9.0-i486-11.tgz
windowmaker-0.92.0-i486-1.tgz
You can find those on http://www.slackware.com.
Download them and to install those just type (as root):
# installpkg pkgname
When you have finished installing all the packages you need remember to run:
# ldconfig
- If you need a window manager you can install windowmaker:
# installpkg windowmaker-0.92-i486.tgz
# wmaker.inst
Download (0.012MB)
Added: 2007-04-30 License: GPL (GNU General Public License) Price:
907 downloads
OpenKiosk 2.0.6
OpenKiosk is a multi-platform kiosk management software. more>>
OpenKiosk is an open-source multi-platform kiosk system designed for use in libraries, offices, schools, internet cafes, airports, conference rooms, and more!
Openkiosk aims to be one of the best kiosk software available in the open-souce community. The following prototype screenshots of the OpenKiosk client reflects its evolution towards the goal of acheiving simplicity and elegance in kiosk terminals.
OpenKiosk, is a system made up of a collection of programs that work together in a local network of inter-connected computers. It is a centralized management software for kiosks. It assumes that the resources are shared and centralized as well, including the Internet connection. This implies that the shared Internet connection to the outside world is assumed to be always on at some point within the local network, perhaps a NAT server. It is up to the client program to automatically limit customers individually from accessing the Internet.
When a customer walks in and uses a kiosk or a workstation, the client program obtains his/her login/user account information. It then sends this login information to the server, which in turn, verifies this data and if valid, returns the access rights and duration of use for the customer back to the client program.
The client program at this point, handles the restrictions transparently including preventing running new programs and making it appear that the Internet connection is down if the time limit is reached or if the administrator manually stopped a customer from continuing to use a kiosk/workstation.
OpenKiosk is primarily designed with the multi-user network in mind. From a library containing 20 public browsing terminals to a large internet cafe or convention center containing hundreds to thousands of kiosks or workstations, OpenKiosk is built with components that are designed to scale up. It is not meant to be used on a single stand-alone computer
The Openkiosk system is basically composed of two parts. The first program is called NodeView. It acts as the OpenKiosk central server containing the client information database. It is responsible for administering all the clients on the network either automatically or manually. Monitoring and controlling the workstations can be done locally via the graphical user interfaces or remotely from a Java Applet in a browser.
The second part is simply called "The Client". It is the actual program that sits between the customer and the operating system interface on the workstations. It is the software which physically limits the users access to the Internet, network resources, the local programs on the workstation itself.
For automatic usage, it can take in membership card login. It is also possible to interface to much more advanced hardware readers such as smart card readers. The client is also capable of simple but important tasks such as remote shutdown, instant messaging, file updates and much more.
Presently, there are two versions of clients. The X11 Linux/Unix version, which is an applet that sits on top of the KDE panel (requires at least KDE 3.X) and the Windows version (Windows 95,98,NT,2000,XP).
<<lessOpenkiosk aims to be one of the best kiosk software available in the open-souce community. The following prototype screenshots of the OpenKiosk client reflects its evolution towards the goal of acheiving simplicity and elegance in kiosk terminals.
OpenKiosk, is a system made up of a collection of programs that work together in a local network of inter-connected computers. It is a centralized management software for kiosks. It assumes that the resources are shared and centralized as well, including the Internet connection. This implies that the shared Internet connection to the outside world is assumed to be always on at some point within the local network, perhaps a NAT server. It is up to the client program to automatically limit customers individually from accessing the Internet.
When a customer walks in and uses a kiosk or a workstation, the client program obtains his/her login/user account information. It then sends this login information to the server, which in turn, verifies this data and if valid, returns the access rights and duration of use for the customer back to the client program.
The client program at this point, handles the restrictions transparently including preventing running new programs and making it appear that the Internet connection is down if the time limit is reached or if the administrator manually stopped a customer from continuing to use a kiosk/workstation.
OpenKiosk is primarily designed with the multi-user network in mind. From a library containing 20 public browsing terminals to a large internet cafe or convention center containing hundreds to thousands of kiosks or workstations, OpenKiosk is built with components that are designed to scale up. It is not meant to be used on a single stand-alone computer
The Openkiosk system is basically composed of two parts. The first program is called NodeView. It acts as the OpenKiosk central server containing the client information database. It is responsible for administering all the clients on the network either automatically or manually. Monitoring and controlling the workstations can be done locally via the graphical user interfaces or remotely from a Java Applet in a browser.
The second part is simply called "The Client". It is the actual program that sits between the customer and the operating system interface on the workstations. It is the software which physically limits the users access to the Internet, network resources, the local programs on the workstation itself.
For automatic usage, it can take in membership card login. It is also possible to interface to much more advanced hardware readers such as smart card readers. The client is also capable of simple but important tasks such as remote shutdown, instant messaging, file updates and much more.
Presently, there are two versions of clients. The X11 Linux/Unix version, which is an applet that sits on top of the KDE panel (requires at least KDE 3.X) and the Windows version (Windows 95,98,NT,2000,XP).
Download (1.1MB)
Added: 2005-08-09 License: GPL (GNU General Public License) Price:
872 downloads
StartCom MultiMedia Linux 5.0.5
Specially designed for the demanding home user, the MultiMedia Edition lets you easily communicate with your friends and family. more>>
StartCom Linux is based on the Red Hat AS source code.
Specially designed for the demanding home user, the MultiMedia Edition lets you easily communicate with your friends and family members over the Internet, browse the news or watching the latest DVD movie you just bought.
Listen to your loved Music while you check your email or play some funny game while you burn a CD, everything is easily accessible from your desktop by a click on your mouse button.
System configuration and adjustments of your preferences never have been so simple, thanks to the integrated configuration tools.
Enhancements:
- StartCom has released its new Multimedia Edition, ML-5.0.5, code named Kessem. Its probably one of the largest and most complete Linux distributions ever released to the public. Release ML-5.0.5, offers many out-of-the-box capabilities, never bundled with an operating system before. Designed as a multimedia workstation with music studio and advanced video editing applications, it also provides the desktop user with the most applications for day to day use.
<<lessSpecially designed for the demanding home user, the MultiMedia Edition lets you easily communicate with your friends and family members over the Internet, browse the news or watching the latest DVD movie you just bought.
Listen to your loved Music while you check your email or play some funny game while you burn a CD, everything is easily accessible from your desktop by a click on your mouse button.
System configuration and adjustments of your preferences never have been so simple, thanks to the integrated configuration tools.
Enhancements:
- StartCom has released its new Multimedia Edition, ML-5.0.5, code named Kessem. Its probably one of the largest and most complete Linux distributions ever released to the public. Release ML-5.0.5, offers many out-of-the-box capabilities, never bundled with an operating system before. Designed as a multimedia workstation with music studio and advanced video editing applications, it also provides the desktop user with the most applications for day to day use.
Download (4326MB)
Added: 2006-06-12 License: GPL (GNU General Public License) Price:
1237 downloads
Yellow Dog Linux 5.0.2
Yellow Dog Linux is the Premier Linux Operating System for PowerPC. more>>
Yellow Dog Linux is the Premier Linux Operating System for PowerPC.
Proven world-wide as the preferred Linux OS for the Power architecture, v4.1 brings Terra Soft into its 8th year of Power Linux development and support. Yellow Dog Linux v4.1 marks a returning point in Terra Softs effort to again provide a leading desktop Linux OS.
Yellow Dog Linux combines the preferred desktops KDE and Gnome with the latest sound and graphic card support, leading (but not bleeding) edge kernels and stable, functional compilers for code development. And of course, the foundation applications and servers expected of all modern Linux operatings systems for web, database, email, and network services.
What will you do with your PowerMac after Apple switches to Intel?
We have an answer--Faster, more stable, and far more efficient as a desktop OS, Yellow Dog Linux is a solid replacement (not just an alternative) to OSX. Breath new life into your PowerPC G3 and G4, giving it a second wind as a personal workstation, or a new function as a web, email, or data server. Want to see how your G5 runs Linux? You may dual-boot both OSX and Yellow Dog Linux or take the leap and run Yellow Dog Linux alone, taking advantage of the multitude of included, freely available, and commercial applications.
Main features:
New or Improved Device Support
- Backlit keys.
- PCMCIA cell phone and modem support.
- Support for Atheros wi-fi cards.
- Dual head config via the GUI.
- Install direct to and boot from FireWire drives.
- USB device auto-mount under both KDE & GNOME.
- Greatly improved sound support.
- Graphical Up2Date package install and update tool.
- Support for the latest Apple Power Books.
- Beta support for Apple G5 PowerMacs with dual core CPUs.
- Beta Extreme driver will be available shortly after release, via YDL.net Enhanced accounts.
Enhancements:
- We are pleased to announce the release of Yellow Dog Linux 5.0.2, a single Install DVD with support for the Apple G4 and G5 computers, Sony PS3, and IBM System p servers, including the JS20/21, OpenPower, and current POWER5 systems. Yellow Dog Linux 5.0.2 offers: kernel 2.6.22-rc4; SDK v2.0 for Cell BE; more than 70 bug fixes and updates; continued support for both 32-bit and 64-bit systems; beta IBM System p support. The IBM Software Development Toolkit (SDK) for Cell Broadband Engine (Cell BE) is a complete package of tools which allows developers to program optimized applications for platforms built upon the Cell BE. The SDK is composed of development tool chains, software libraries, and sample source.
<<lessProven world-wide as the preferred Linux OS for the Power architecture, v4.1 brings Terra Soft into its 8th year of Power Linux development and support. Yellow Dog Linux v4.1 marks a returning point in Terra Softs effort to again provide a leading desktop Linux OS.
Yellow Dog Linux combines the preferred desktops KDE and Gnome with the latest sound and graphic card support, leading (but not bleeding) edge kernels and stable, functional compilers for code development. And of course, the foundation applications and servers expected of all modern Linux operatings systems for web, database, email, and network services.
What will you do with your PowerMac after Apple switches to Intel?
We have an answer--Faster, more stable, and far more efficient as a desktop OS, Yellow Dog Linux is a solid replacement (not just an alternative) to OSX. Breath new life into your PowerPC G3 and G4, giving it a second wind as a personal workstation, or a new function as a web, email, or data server. Want to see how your G5 runs Linux? You may dual-boot both OSX and Yellow Dog Linux or take the leap and run Yellow Dog Linux alone, taking advantage of the multitude of included, freely available, and commercial applications.
Main features:
New or Improved Device Support
- Backlit keys.
- PCMCIA cell phone and modem support.
- Support for Atheros wi-fi cards.
- Dual head config via the GUI.
- Install direct to and boot from FireWire drives.
- USB device auto-mount under both KDE & GNOME.
- Greatly improved sound support.
- Graphical Up2Date package install and update tool.
- Support for the latest Apple Power Books.
- Beta support for Apple G5 PowerMacs with dual core CPUs.
- Beta Extreme driver will be available shortly after release, via YDL.net Enhanced accounts.
Enhancements:
- We are pleased to announce the release of Yellow Dog Linux 5.0.2, a single Install DVD with support for the Apple G4 and G5 computers, Sony PS3, and IBM System p servers, including the JS20/21, OpenPower, and current POWER5 systems. Yellow Dog Linux 5.0.2 offers: kernel 2.6.22-rc4; SDK v2.0 for Cell BE; more than 70 bug fixes and updates; continued support for both 32-bit and 64-bit systems; beta IBM System p support. The IBM Software Development Toolkit (SDK) for Cell Broadband Engine (Cell BE) is a complete package of tools which allows developers to program optimized applications for platforms built upon the Cell BE. The SDK is composed of development tool chains, software libraries, and sample source.
Download (MB)
Added: 2007-06-15 License: GPL (GNU General Public License) Price:
571 downloads
AlienDrive Live CD 1.0
AlienDrive Live CD is a linux distribution based on the SLAX Operating System. more>>
AlienDrive Live CD is a linux distribution based on the SLAX Operating System.
It is sometimes affectionately referred to by the people who love it as "The Alien". It was designed specifically to function as a Digital Audio Workstation and Pre/Post Video Production platform.
The system core is based on a compressed module design that has been carefully tuned to reach a level of performance so advanced, it is thought to have come from the enigmatic Gray Aliens We hope you enjoy meeting The Alien
Live CD login username: root password: toor
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details
<<lessIt is sometimes affectionately referred to by the people who love it as "The Alien". It was designed specifically to function as a Digital Audio Workstation and Pre/Post Video Production platform.
The system core is based on a compressed module design that has been carefully tuned to reach a level of performance so advanced, it is thought to have come from the enigmatic Gray Aliens We hope you enjoy meeting The Alien
Live CD login username: root password: toor
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details
Download (211MB)
Added: 2006-01-02 License: GPL (GNU General Public License) Price:
1391 downloads
KIWI Image System rev435
KIWI Image System provides a complete operating system image solution for Linux supported hardware platforms. more>>
KIWI Image System provides a complete operating system image solution for Linux supported hardware platforms as well as for virtualisation systems like Xen Qemu or VMware. The KIWI architecture was designed as a two level system. The first stage, based on a valid software package source, creates a so called physical extend according to the provided image description. The second stage creates from a required physical extend an operating system image. The result of the second stage is called a logical extend or short an image.
A normal installation process is starting from a given installation source and installs single pieces of software until the system is complete. During this process there may be manual user intervention required. However an operating system image represents an already completed installation encapsulated as a file and optionally includes the configuration for a specific task. Such an operating system starts working as soon as the image has been brought to a system storage device no matter if this is a volatile or non volatile storage. The process of creating an image takes place without user interaction.
This means all requirements of the encapsulated system has to be fulfilled before the image is created. According to this the so called image description tree stores all the information needed to create an image.
Main features:
- Distribution independent
- Support for virtualisation systems like Xen
- Support for deploying images over the network
- Support for VMware / Qemu images
- Support for USB-Stick systems
- Support for LiveCD/DVD systems
- Centralized image description based on XML
- Prebuild boot images for SUSE systems
- Prebuild PXE configuration usable with kiwi netboot images
- SUSE Linux on a 128MB flash card.. yes thats possible
<<lessA normal installation process is starting from a given installation source and installs single pieces of software until the system is complete. During this process there may be manual user intervention required. However an operating system image represents an already completed installation encapsulated as a file and optionally includes the configuration for a specific task. Such an operating system starts working as soon as the image has been brought to a system storage device no matter if this is a volatile or non volatile storage. The process of creating an image takes place without user interaction.
This means all requirements of the encapsulated system has to be fulfilled before the image is created. According to this the so called image description tree stores all the information needed to create an image.
Main features:
- Distribution independent
- Support for virtualisation systems like Xen
- Support for deploying images over the network
- Support for VMware / Qemu images
- Support for USB-Stick systems
- Support for LiveCD/DVD systems
- Centralized image description based on XML
- Prebuild boot images for SUSE systems
- Prebuild PXE configuration usable with kiwi netboot images
- SUSE Linux on a 128MB flash card.. yes thats possible
Download (MB)
Added: 2007-06-25 License: GPL (GNU General Public License) Price:
857 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above vmware workstation 5.0 search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
