Free vmware inc software for linux

SlaBuntuVMware is a useful installation suite for installing VMware Server on Slackware or Ubuntu.

The project automatically downloads packages from the VMware site.

Tested on Slackware 11. (Slackware 10.2 might not work - try)
Tested on Ubuntu Desktop Dapper Drake and Ubuntu Desktop Edgy.

IMPORTANT: this suite does not include the vmware server packs,
they are downloaded from the official VMware site.
You also need a server key for activating the product that you must
get (for free) from the VMware web-site (http://www.vmware.com/server/)

INSTALLATION (Slackware Linux) :

a) 1- The perfect setup for running vmware on Slackware is:
Slackware 11 (When you install the OS leave a big partion for your
virtual machines).

Using a good server with an hardware raid controller:

Suggested Partition Table (scsi disks, if ide hda):
/dev/sda1 swap (megs?gb? depends on your system)
/dev/sda2 / 10Gb
/dev/sda3 /home 2Gb
/dev/sda4 /vm (160 Gb the rest for your virtual machines)

You must do a normal install with X support but no KDE.


2- Dropline Gnome (http://www.droplinegnome.net)
It is suggested you run gnome on Slackware 11. Gnome is not
included in the distro cds, therefore you must download
Dropline Gnome.

3- Kernel 2.6.x (with the kernel sources into /usr/src/linux)
(Default Kernel 2.4.33.3 works perfectly though)

CAUTION: take a look on www.vmware.com for the
supported kernel 2.6 versions.

OR

- If you have problems building 2.6.x vmware kernel module, just use
the normal 2.4.33.3 kernel supplied with your slackware, or try the test26.s
or huge26.s supplied with your slackware cds.

b) - The base setup for running vmware on Slackware is:
1- Slackware 11
2- Kde(not tested can have problems with some libraries)
(if you do not want to Download and install Dropline Gnome)
3- Kernel 2.4.33 (with the kernel sources into /usr/src/linux)

Using a normal pc with no raid controller (so you should use linux
raid software):

Suggested Partition Table (scsi disks, if ide hda):
/dev/md1 swap (megs?gb? depends on your system)
/dev/md2 / 10Gb
/dev/md3 /home 2Gb
/dev/md4 /vm (100 Gb? the rest for your virtual machines)

---------------------------------------------------------------------------
If you do not want to use Gnome or Kde go at the end of this file.
---------------------------------------------------------------------------

2) After making sure you have everything (including the kernel sources
inside /usr/src/linux) you can run:

3) as root ./setup.sh

4) follow the steps provided
(you can hit ENTER to most of the questions (90%)

4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)

6) under an X session: Run the command "vmware" and Enjoy vmware!

INSTALLATION (Ubuntu Desktop, Alternate,NOT Server):

1) edit /etc/apt/sources.list and uncomment all the lines starting with deb

2) open a terminal (xterm) and type "sudo ./setup.sh"

3) follow the steps provided
(you can hit ENTER to most of the questions (90%)

4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)

5) Run the command "vmware" and Enjoy vmware!

INSTALLATION ON UBUNTU SERVER

- Not tried yet, but you should at first download and install X11 and gnome
and then follow the steps provided for Ubuntu Desktop above.

IMPORTANT INFO:

- Remember that vmware server packs are downloaded from the official vmware
site and are property of the VMware Company: http://www.vmware.com/

- Remember that in order to use VMware you should accept the terms of the
VMware license that will be displayed during the installation process.

- Remember that in order to installa VMware you should ask the VMware
fellows for a key. Do this at the VMware site: http://www.vmware.com/

- To create virtual machines you should use the vmware console.
a) Run the command "vmware" and the vmware console starts up.
b) Then connect to localhost.

- After created a virtual machine to run it from the cmd line use:
bash# vmware-cmd vmname.vmx start

Author: Lorenzo Allori

#####################################################

If you do not have Gnome or Kde youll need the following:

#####################################################

- Slack with glibc and glibcsolibs installed. Make sure you
have X11 installed with a window manager.

Packages needed are:
glibc-2.3.6-i486-6.tgz
glibc-solibs-2.3.6-i486-6.tgz
kernel-source-2.4.33.3-noarch-1.tgz
x11-6.9.0-i486-11.tgz
x11-devel-6.9.0-i486-11.tgz
windowmaker-0.92.0-i486-1.tgz

You can find those on http://www.slackware.com.

Download them and to install those just type (as root):

# installpkg pkgname

When you have finished installing all the packages you need remember to run:

# ldconfig

- If you need a window manager you can install windowmaker:

# installpkg windowmaker-0.92-i486.tgz
# wmaker.inst

VMware Server product is a robust yet easy to use software for users new to server virtualization technology.
VMware Server enables companies to partition a physical server into multiple virtual machines, and to start experiencing the benefits of virtualization.
Benefits of VMware Server
Provision a new server in minutes without investing in new hardware.
Run Windows and Linux operating systems and applications on the same physical server.
Increase the utilization of a physical server.
Move virtual machines from one physical host to another without re-configuration.
With VMware Server you can:
Streamline software development and testing by allowing developers to create multiple environments with different operating systems on the same server.
Evaluate software in ready-to-run virtual machines without installation and configuration.
Re-host legacy operating systems such as Windows NT Server 4.0 and Windows 2000 Server in a virtual machine running on new hardware and operating system.
Simplify server provisioning by building a virtual machine once and deploying it multiple times.
Leverage pre-built, ready-to-run virtual appliances that include virtual hardware, operating system and application environments. Virtual appliances for Web, email, proxy and other infratructure services are available for download from the VMTN Virtual Machine Center.
VMware Server is the first step to VMware Virtual Infrastructure
While VMware Server is a compelling product for new virtualization users, VMware Virtual Infrastructure products-ESX Server with Virtual SMP and VirtualCenter with VMotion-enable companies to implement large-scale production server consolidation, business continuity, and enterprise desktop solutions with enterprise-class performance, high availability, manageability and security. View a comparison between VMware Server and VMware Virtual Infrastructure.
Enhancements:
- This release fixes four security vulnerabilities, as reported in CVE-2007-1337, CVE-2007-1877, CVE-2007-1069, and CVE-2007-1876.
- These vulnerabilities permitted denial of service, crashes of Windows guests, or corrupted stack pointers.
- A problem with VMware Tools that caused the guest to run out of memory was fixed.
- A crash in the VIX API was resolved.
- Building of the kernel and the HGFS modules was improved.
- Several occasional crashes were fixed.

Masswire Mail provides a SQL POP3 Webmail software.

Masswire Mail is a Webmail client written in Perl that can retrieve messages from multiple POP3 accounts and store them in a single SQL table.

Some features include a spell checker using the Text-Aspell module, a Bayesian filter using the Algorithm NaiveBayes module, and attachments using the Mail Sender module.

Damn Vulnerable Linux (DVL) is a Linux-based (modified Damn Small Linux) tool for IT-Security & IT-Anti-Security and Attack & Defense. Damn Vulnerable Linux was initiated for training tasks during university lessons by the IITAC (International Institute for Training, Assessment, and Certification).
Damn Vulnerable Linux (DVL) is highly integrated into the community project crackmes.de (http://www.crackmes.de) and is frequently updated with new community provided lessons. Damn Vulnerable Linux (DVL) is your place either to get the latest Damn Vulnerable Linux (DVL) distribution, to get new lessons, or to submit own lessons based on the Damn Vulnerable Linux (DVL) training system.
Damn Vulnerable Linux (DVL) is provided without any fee or charge! Actually, it is a perverted Linux distribution made to be as insecure as possible. It is collection of IT-Security and IT-Anti-Security tools. Additional it includes a fullscaled lesson based environment for Attack & Defense on/for IT systems for self-study or teaching activities during university lectures. Its a Live Linux Distro, which means it runs from a bootable CD in memory without changing the native operating system of the host computer.
As well it can be run within virtual machine environments, such as qemu or vmware. There is no need to install a virtual machine if you use the embedded option. Its sole purpose in life is to put as many security tools at your disposal with as much training options as it can. It contains a huge ammount of lessons including lesson description - and solutions if the level has been solved by a community member at crackmes.de.
Damn Vulnerable Linux (DVL) is meant to be used by both novice and professional security personnel but is not ideal for the Linux uninitiated. Damn Vulnerable Linux (DVL) assumes you know the basics of Linux as most of your work will be done from the command line. If you are completely new to Linux, its best you stop playing with this system.
INSTALLED TOOLS
- HT 0.5
- libreadline4_4.2a-5_i386
- gdb_5.2.cvs20020401-6_i386
- binutils_2.12.90.0.1-4_i386 (including objdumps,gas,strings ...)
- nasm-0.98-1.i386
- HLA v1.86
- libelfsh0-dev_0.65rc1-1_i386
- elfsh_0.65rc1-1_i386
- Apache 2.0.5.4
- Php 4.4.0
- ethereal-common_0.9.4-1woody12_i386
- ethereal_0.9.4-1woody12_i386
- libpcap0_0.6.2-2_i386
- tcpdump_3.6.2-2.8_i386
- lsof_4.57-1_i386
- ltrace_0.3.26_i386
- nmap_2.54.31.BETA-1_i386
- strace_4.4-1.2_i386
- ELFkickers-2.0a (including sstrip, rebind, elfls, ebfc, elftoc)
- GCC/G++ 3.3.4
- GNU Make 3.80
- bastard_bin- 0.17.tgz
- Mysql-server 4.4.1
- Ruby 1.8
- Python 2.3
- lida-03.00.00
- DDD 3.3.1
- Metasploit Framework

Cooperative Linux is the first working free and open source method for optimally running Linux on Microsoft Windows natively.

More generally, Cooperative Linux (short-named coLinux) is a port of the Linux kernel that allows it to run cooperatively alongside another operating system on a single machine.

For instance, it allows one to freely run Linux on Windows 2000/XP, without using a commercial PC virtualization software such as VMware, in a way which is much more optimal than using any general purpose PC virtualization software.

In its current condition, it allows us to run the KNOPPIX Japanese Edition on Windows.

Wordpress project is the leading open source blogging platform that has rocketed to popularity thanks to its open design and powerful features. This JumpBox includes Wordpress version 2.1.2.

WHY USE A JUMPBOX

Its Simple

Open Source applications are great. The applications are powerful, inexpensive and get the job done. But installing and configuring those applications can be a pain. A JumpBox delivers Open Source applications in a way that makes them simple to try, run and operate.

Its Quick

Actually downloading a JumpBox will take the most time. Once thats done, youre just a few minutes from having a working application that can serve multiple users.

Its Portable

A JumpBox collects the application, application dependencies and all application data into a single bundle that can easily be moved from one computer to another. This allows you to start running the application on your desktop and then as usage grows move it to a server without needing to reinstall or reconfigure. Plus with support for Mac OS X, Windows and Linux you can even move the application between platforms with little effort.

Its Safe

Manually installing Open Source applications not only takes a lot of time and effort, but when youre done its still left to you to figure out how to protect the data the application manages. With a JumpBox its easy to add automatic backups of the entire state of the application.

Its Virtual

A JumpBox application is a virtual appliance that bundles the open source application and all its runtime dependencies into a single package that runs on top of virtualization software from VMWare, Parallels or Xen. This means all JumpBox applications automatically gain the benefits of traditional server virtualization and can be dropped into existing virtualization infrastructure when available.

Its Comfortable

JumpBox provides a consistent runtime environment for all applications that we bundle. The applications may differ considerably, but their installation and operation will be familiar no matter which JumpBox you choose.

Source Mage GNU/Linux distribution is based on a sorcerous metaphor of "casting" and "dispelling" packages, which we refer to as "spells".
This is a development ISO and potentially loaded with bugs and glitches. This is where you come in. We need your help to squash these bugs.
Please download, burn, and install this ISO to a spare partition, extra computer, or over your least favorite friends Windows partition. VMWare or bochs works too. Upon finding a glitch, please report it in bugzilla. No bug is too small, or too large.
Help shape the future of Source Mage! Download the Next Generation Testing ISO and install!
Enhancements:
- A "dependency" scheme was added to make sure you dont accidentally skip a vital step or do things in the wrong order.
- You can still override dependencies if you really know what youre doing.
- Spells are now installed in the background while you are busy selecting options.
- Software RAID support via mdadm was added.