Free vmware crack software for linux

aircrack is a 802.11 sniffer and WEP/WPA key cracker.
It consists of: airodump (an 802.11 packet capture program), aireplay (an 802.11 packet injection program), aircrack (static WEP and WPA-PSK cracking), and airdecap (decrypts WEP/WPA capture files).
Enhancements:
- airodump: show probing clients as "not associated"
- airodump: dont substract the noise level unless madwifi
- airodump: fixed channel hopping with old orinoco
- airmon.sh: added detection of the zd1211 driver

SlaBuntuVMware is a useful installation suite for installing VMware Server on Slackware or Ubuntu.

The project automatically downloads packages from the VMware site.

Tested on Slackware 11. (Slackware 10.2 might not work - try)
Tested on Ubuntu Desktop Dapper Drake and Ubuntu Desktop Edgy.

IMPORTANT: this suite does not include the vmware server packs,
they are downloaded from the official VMware site.
You also need a server key for activating the product that you must
get (for free) from the VMware web-site (http://www.vmware.com/server/)

INSTALLATION (Slackware Linux) :

a) 1- The perfect setup for running vmware on Slackware is:
Slackware 11 (When you install the OS leave a big partion for your
virtual machines).

Using a good server with an hardware raid controller:

Suggested Partition Table (scsi disks, if ide hda):
/dev/sda1 swap (megs?gb? depends on your system)
/dev/sda2 / 10Gb
/dev/sda3 /home 2Gb
/dev/sda4 /vm (160 Gb the rest for your virtual machines)

You must do a normal install with X support but no KDE.


2- Dropline Gnome (http://www.droplinegnome.net)
It is suggested you run gnome on Slackware 11. Gnome is not
included in the distro cds, therefore you must download
Dropline Gnome.

3- Kernel 2.6.x (with the kernel sources into /usr/src/linux)
(Default Kernel 2.4.33.3 works perfectly though)

CAUTION: take a look on www.vmware.com for the
supported kernel 2.6 versions.

OR

- If you have problems building 2.6.x vmware kernel module, just use
the normal 2.4.33.3 kernel supplied with your slackware, or try the test26.s
or huge26.s supplied with your slackware cds.

b) - The base setup for running vmware on Slackware is:
1- Slackware 11
2- Kde(not tested can have problems with some libraries)
(if you do not want to Download and install Dropline Gnome)
3- Kernel 2.4.33 (with the kernel sources into /usr/src/linux)

Using a normal pc with no raid controller (so you should use linux
raid software):

Suggested Partition Table (scsi disks, if ide hda):
/dev/md1 swap (megs?gb? depends on your system)
/dev/md2 / 10Gb
/dev/md3 /home 2Gb
/dev/md4 /vm (100 Gb? the rest for your virtual machines)

---------------------------------------------------------------------------
If you do not want to use Gnome or Kde go at the end of this file.
---------------------------------------------------------------------------

2) After making sure you have everything (including the kernel sources
inside /usr/src/linux) you can run:

3) as root ./setup.sh

4) follow the steps provided
(you can hit ENTER to most of the questions (90%)

4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)

6) under an X session: Run the command "vmware" and Enjoy vmware!

INSTALLATION (Ubuntu Desktop, Alternate,NOT Server):

1) edit /etc/apt/sources.list and uncomment all the lines starting with deb

2) open a terminal (xterm) and type "sudo ./setup.sh"

3) follow the steps provided
(you can hit ENTER to most of the questions (90%)

4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)

5) Run the command "vmware" and Enjoy vmware!

INSTALLATION ON UBUNTU SERVER

- Not tried yet, but you should at first download and install X11 and gnome
and then follow the steps provided for Ubuntu Desktop above.

IMPORTANT INFO:

- Remember that vmware server packs are downloaded from the official vmware
site and are property of the VMware Company: http://www.vmware.com/

- Remember that in order to use VMware you should accept the terms of the
VMware license that will be displayed during the installation process.

- Remember that in order to installa VMware you should ask the VMware
fellows for a key. Do this at the VMware site: http://www.vmware.com/

- To create virtual machines you should use the vmware console.
a) Run the command "vmware" and the vmware console starts up.
b) Then connect to localhost.

- After created a virtual machine to run it from the cmd line use:
bash# vmware-cmd vmname.vmx start

Author: Lorenzo Allori

#####################################################

If you do not have Gnome or Kde youll need the following:

#####################################################

- Slack with glibc and glibcsolibs installed. Make sure you
have X11 installed with a window manager.

Packages needed are:
glibc-2.3.6-i486-6.tgz
glibc-solibs-2.3.6-i486-6.tgz
kernel-source-2.4.33.3-noarch-1.tgz
x11-6.9.0-i486-11.tgz
x11-devel-6.9.0-i486-11.tgz
windowmaker-0.92.0-i486-1.tgz

You can find those on http://www.slackware.com.

Download them and to install those just type (as root):

# installpkg pkgname

When you have finished installing all the packages you need remember to run:

# ldconfig

- If you need a window manager you can install windowmaker:

# installpkg windowmaker-0.92-i486.tgz
# wmaker.inst

Leptons Crack is a generic password cracker, easily customizable with a simple plug-in system. COPYRIGHT=1]
For the incremental scan, the user can provide a regex-like expression
that will be enumerated, thus checking every possible combination. This
powerful feature effectively combines `shoulder-surfing with standard
brute-forcing.
http://usuarios.lycos.es/reinob/lcrack/lcrack-20040914.tar.gz
By default it comes with the following modules:
md4 : standard MD4 hash
md5 : standard MD5 hash
nt4 : NT MD4/Unicode
dom : Lotus Domino HTTP password
sha1 : standard SHA-1 hash
null : trivial 1-byte hash
(sample for plug-in developers
Enhancements:
- Added support for any ASCII character (ie. also non-printable) in the charset and regex definition, via (octal), x(hex), (decimal)

VMware Server product is a robust yet easy to use software for users new to server virtualization technology.
VMware Server enables companies to partition a physical server into multiple virtual machines, and to start experiencing the benefits of virtualization.
Benefits of VMware Server
Provision a new server in minutes without investing in new hardware.
Run Windows and Linux operating systems and applications on the same physical server.
Increase the utilization of a physical server.
Move virtual machines from one physical host to another without re-configuration.
With VMware Server you can:
Streamline software development and testing by allowing developers to create multiple environments with different operating systems on the same server.
Evaluate software in ready-to-run virtual machines without installation and configuration.
Re-host legacy operating systems such as Windows NT Server 4.0 and Windows 2000 Server in a virtual machine running on new hardware and operating system.
Simplify server provisioning by building a virtual machine once and deploying it multiple times.
Leverage pre-built, ready-to-run virtual appliances that include virtual hardware, operating system and application environments. Virtual appliances for Web, email, proxy and other infratructure services are available for download from the VMTN Virtual Machine Center.
VMware Server is the first step to VMware Virtual Infrastructure
While VMware Server is a compelling product for new virtualization users, VMware Virtual Infrastructure products-ESX Server with Virtual SMP and VirtualCenter with VMotion-enable companies to implement large-scale production server consolidation, business continuity, and enterprise desktop solutions with enterprise-class performance, high availability, manageability and security. View a comparison between VMware Server and VMware Virtual Infrastructure.
Enhancements:
- This release fixes four security vulnerabilities, as reported in CVE-2007-1337, CVE-2007-1877, CVE-2007-1069, and CVE-2007-1876.
- These vulnerabilities permitted denial of service, crashes of Windows guests, or corrupted stack pointers.
- A problem with VMware Tools that caused the guest to run out of memory was fixed.
- A crash in the VIX API was resolved.
- Building of the kernel and the HGFS modules was improved.
- Several occasional crashes were fixed.

Password Cracking Library allows you to write own password cracking software.
Main features:
- powerful dictionary attack with word modifiers
- brute force (with or without known chars) attack
- misspelled password recovery, and more
Enhancements:
- Any (european) language and encoding support
- User-defined charsets
- New modifiers, including user-defined conversion tables
- Timing and benchmarking functions
- Any password length

WMQuake can run Quake 1 in a dockapp window.

It works pretty well. If you plan on doing netplay with this, you cant start a new game or join a game unless you first bring up the console and type: "disconnect". Then you can start a new multiplayer game or join an existing one. This is a bug that was present in the original source, and I left it untouched. There is no mouse or CD audio support, because they were not implemented at the time, and because I find both of these features extremely useless and not worth my time implementing.

Usage is simple. All standard quake1 command line options apply except winsize, which was removed. Feature set is close to that of earlier versions of quake 1 for linux which were handled by crack.com.

This is a complete software-only version, all traces of assembly code were removed. We are dealing with such small windows, it was really unnecessary. Internally, the engine renders into 320x320 buffer, which is then scaled down to fit inside dockapp. It isnt extremely pretty but it isnt so bad either. I could have done rendering into a smaller buffer to reduce CPU load, but then the statusbar would have to be disabled. And seems like the bare minimum size to render into has to be > 128 because of some calculation errors or something, with smaller window sizes the game would segfault very often.

Just what you always wanted. Hardcore quake fanatics can now enjoy their favorite game in a 64x64 window! Now works with FreeBSD, too!

Installation:

1. check Makefile, but there is probably nothing there to see.
2. make
3. copy wmquake to where you got your id1/ dir and stuff. Make sure that dir is all lowercase and the pakfiles inside are lowercase, too etc you know the standard routine.
4. ./wmquake &

Protech is a new security based Linux distro based on Ubuntu Feisty.

Included tools:

Cisco:

Asleap; Cisco Exploiter; Yersinia.

Database tools:

HackerStorm; Blind SQL injection; HTTP SQL Bruteforce; Metacoretex; SQL Inject

Oracle:

Metacoretex; OAT

Aquiring Tools:

DCFLDD; DD; DD_Rescue

Enumeration:

Dns: Dig; DNSWalk; DNS Enum; Host
Google: Finger Google; Google Mail Enum; Gooscan; Google Search
Misc: P0f
Samba: NBTScan; Samba Enum
SMTP: Relay Scanner; SMTP Vrfy
SNMP: SNMP Enum; Snmpwalk; Senmpset; Snmpget
WWW: ISR Forms; L1st URLs; Paros Proxy

Exploits:

Metasploit Framework 2.7; Milw0rm; Exploit Tree (Several Tools)

Forensics:

Analysis: Autopsy
File Carving: Foremost

Fuzzers:

Bed; Pirana; Clfuzz

Password Attacks:

Rainbow Crack; Hash Collision; John; Ophcrack; Samdump2; THC PPTP; Hydra

Scanners:

Port Scanners: Amap; Nmap; Nmapfe; Onesixtyone
Vuln. Scanners: Nessus; Nikto
VPN Scanners: IKE Scan; PSK Crack

Sniffers:

Driftnet; Dsniff; Wireshark; Ettercap; Mailsnarf; SSHMITM; SSHow; URLsnarf; Filesnarf; Msgsnarf

Spoofing:

ARNSpoof; DNSSpoof; Ettercap; Yersinia

Wireless:

Wiscan; FakeAP; Kismet; Aireplay; Airsnort; Cowpatty; Aircrack; Air Decap; Airmon; Airodump

Updated tools and new tools will be added in the final release

Wepdecrypt is a Wireless LAN Tool written in c which guesses WEP Keys based on a active dictionary attack, key generator, distributed network attack and some other methods, Wepdecrypt based on wepattack and GPL licensed.
Main features:
- Implemented packet filters.
- Only one crypted packet is enough to start cracking
- Has its own key generator.
- Can crack a dumpfile over a network.
- Can act as a server and client.
- Has an fltk gui.
Enhancements:
- Applied destdir patch thanks to VMiklos from frugalware (first patch applied Thanks! :).
- Modified configure and Makefile to support destdir and wkeygen features.
- Now wordfile can contain hex keys just add HEXKEY_FILE to the first line. Feature sugested by Scott Taylor thanks!.
- Added wkeygen, wkeygen is a modified version of an add-on from linux-wlan-ng to generate wep hex keys.
- Added a man page for wkeygen tool.
- Documentation updated to show usage of new features.
- Some source code clean ups.
- Applied a patch from gentoo to fix a little compiling problem.
- Added support to save bssid in server log when a key is found by a client.
- Added new code to generate keys, it has been widely improved, updated wepdecrypt to use this new code (old code is still there it will be removed soon).
- Added an option to set the mode for the new key generator (all, alpha, alphanumeric, numeric, printable, random).
- Now -n option works as it was supposed to.
- Version and Help options added to the guis help menu.
- Gui look and functionalities changed (added an option to set -d flag and another option to set the numbers of blocks to get and decrypt from the server).
- Reconstructed the way in which gwepdecrypt handles the output data. This fixes two bugs one that caused use of 100% of the CPU and another related with gwepdecrypt output (no more cutted lines, also fixed in windows).
- Added code to check if wepdecrypt is installed before executing it in gwepdecrypt (fixes a crash in gwepdecrypt).
- Little speed up enhacement.
- Some Gui, wepdecrypt and wkeygen minor bugs fixed.
- Windows support (Done. Binaries will be released with the next version).
- Modified wepdecrypt scripts to look for john in the path.
- Added a todo file.
- Added a file called Examples.txt with scripts that use tools from wepdecrypt.