Free ubuntu tweak 0.4.3 software for linux

Optimoz Tweaks automatically performs actions based on the cursor.

Automatically shows the sidebar when the mouse cursor touches the left window border, and closes it when the cursor is over the web page again.

i815 linux tweak project is i815-family chipset tweaker and optimizer for improve performance. Remember that some settings can crash your system.

USE AT YOUR OWN RISK

Installation:

From root user tpye "./install.sh".
If success, module will compile and plased into modules directory.

Usage:

modprobe i815tweak

Without any parameters nothing changes. In /proc/i815info you can see actual chipset settings.

Or see "dmesg" for error info..

For list all module parameters check "modinfo i815tweak".

cas=[2,3]
CAS# Latency (CL)

ras2cas=[2,3]
SDRAM RAS# to CAS# Delay (SRCD)

ras=[2,3]
SDRAM RAS# Precharge (SRP)

refX=[0-7]
SDRAM Mode Select (SMS). These bits select the operational mode of the MCH DRAM interface. The special modes are intended for initialization at power up.

0 = DRAM in Self-Refresh Mode, Refresh Disabled
1 = Normal Operation, 100 MHz System memory – Refresh interval 15.6 uSec
133 MHz System memory – Refresh interval 11.7 uSec
2 = Normal Operation, 100 MHz System memory – Refresh interval 7.8
133 MHz System memory – Refresh interval 5.85 uSec
3 = Normal Operation, 100 MHz System memory – Refresh interval 1.28 uSec
133 MHz System memory – Refresh interval 0.96 uSec
4 = NOP Command Enable. In this mode all processor cycles to SDRAM result in a NOP Command on the SDRAM interface.
5 = All Banks Precharge Enable. In this mode all processor cycles to SDRAM result in an All Banks Precharge Command on the SDRAM interface.
6 = Mode Register Set Enable. In this mode all processor cycles to SDRAM result in a mode register set command on the SDRAM interface.
7 = CBR Enable. In this mode all processor cycles to SDRAM result in a CBR cycle on the SDRAM interface.

dct57=[0, 1]
DRAM Cycle Time (DCT). This bit controls the number of SCLKs for an access cycle.
0 = Tras = 7 SCLKs and Trc = 9 SCLKs.
1 = Tras = 5 SCLKs and Trc = 7 SCLKs (Default)

bnr=[0,1]
Block New Request Lookahead

agp=[0,1]
AGP4X Override

sba=[0,1]
Sideband Address Enable (SBA)
1 = Enable. The sideband addressing mechanism is enabled.
0 = Disable

fw=[0,1]
Fast Writes Enable (FW). This bit must always be programmed to 0. The chipset will behave
unpredictably if this bit is programmed with 1.

cpc=[0,1]
Command per cycle

sm=[0,1]
SM Always Bypass

hacqs=[0,1]
Host Aperture Cycle Queue Slot
0 = Default value. No dedicated queue
1 = A dedicated queue slot is reserved

clt=[0,1]
CPU Latency Timer
0 = Deferrable processor cycle will be Deferred immediately after receiving another ADS#
1 = Deferrable processor cycle will only be Deferred after in has been held in a “Snoop Stall” for 31
clocks and another ADS# has arrived (default).

dpcp=[0,1]
DRAM Page Closing Policy (DPCP)
0 = Precharge All during the service of any “Page Miss” access.
1 = Precharge All during the service of any “Page Miss” access.

magwe=[0,1]
Memory Arbiter Grant Window Enable (MAGWE).
0 = Disabled. Enforce fixed priority.
1 = 24 clocks limiting host, 24 clocks guaranteed to low priority graphics stream.

EXAMPLE:

modprobe i815tweak cas=2 ras2cas=2 ras=2 bnr=1 dct57=1

For more info about i815 chipset settings see Intel Document Reference Number 290688-001, 290693-001 and 290693-002

EventWatcher is a KDE application which notifies you about various events.
"Events" are pieces of information about, for example, news ticker or blog updates, new emails, user logons, system warnings, hardware events etc.
They get collected by EventWatcher plugins and sent to the main application which lives in the KDE system tray for most of the time and displays this information.
EventWatcher requires KDE/Qt 3.2.
Available Plugins
- DCOP: Receives "events" via KDEs desktop communication protocol, for example from other KDE applications or scripts.
- Log File Monitor: Reports changes in log files.
- RSS Feed Monitor: Watches RSS feeds provided by many news sites and blogs.
Enhancements:
- Event expiring:
- Remove events based on the time they were received
- Configuable behaviour: Expire agetime, Expire only unread events, Auto-expire
- KNotify support (Patch by Paul Eggleton)
- Hide plusminus button when list is empty.

Titlebar Tweaks 1.8.3.7 is yet another excellent utility you should not miss. It is actually a Firefox extension that allows you to tweak your browsers titlebar text.

If you always use a single Firefox window, opening all new pages in tabs, you probably don't care much about displaying the current tabs page title in the window titlebar. Titlebar Tweaks enables you to customize your window titlebar to do the following:

• Display the browser name before the page title
• Display only the browser name or page title
• Replace the browser name in the titlebar with your own text
  

Major Features:

1. Compatible with Mozilla Firefox 2.0.
2. Enables you to switch the order of the browser name and document title in the browser's titlebar, or remove one of the two entries.
3. Allows you to change the browser name in the titlebar.

Enhancements:

• Added "Blank Page" to display for web page titles that are blank.

Requirements:

• Mozilla Firefox

Kubuntu is an Ubuntu-derived distribution. The Kubuntu CDs are made up of Ubuntus base plus KDE. You can get exactly the same effect by installing Ubuntu and adding the KDE packages from the Ubuntu archives.

Kubuntu is the result of several months effort to get KDE 3.4 into Ubuntus main repository and create the first major derived Ubuntu distribution. Kubuntu is not a fork of Ubuntu but an official project of it, sharing the same package archive and infrastructure. It is possible to convert an Ubuntu system to Kubuntu or vice versa.

Ubuntu Christian Edition is a free, open source operating system geared towards Christians. Ubuntu Christian Edition is based on the popular Ubuntu Linux. Ubuntu is a complete Linux-based operating system, freely available with both community and professional support.
The goal of Ubuntu Christian Edition is to bring the power and security of Ubuntu to Christians. Ubuntu Christian Edition is suitable for both desktop and server use. The current Ubuntu release supports PC (Intel x86).
Ubuntu Christian Edition includes more than 16,000 pieces of software, but the core desktop installation fits on a single CD. Ubuntu Christian Edition covers every standard desktop application from word processing and spreadsheet applications to web server software and programming tools.
Along with the standard Ubuntu applications, Ubuntu Christian Edition includes the best available Christian software. The latest release contains GnomeSword, a top of the line Bible study program for Linux based on the Sword Project. There are several modules installed with GnomeSword including Bibles, Commentaries, and Dictionaries.
Ubuntu Christian Edition also includes fully integrated web content parental controls powered by Dansguardian. A graphical tool to adjust the filter settings has also been added. These features are truly what sets Ubuntu Christian Edition apart.
Enhancements:
- We are excited to announce the release of Ubuntu CE v3.3. This release adds a few new features and several updates and fixes. This release comes just after Ubuntu CEs 1st birthday. We have had a great year and are looking forward to the continued development in the year to come. We have added the WhatWouldJesusDownload toolbar to Firefox. This toolbar gives quick access to many of the great tools available at WhatWouldJesusDownload, the parent site of the Ubuntu CE project. The Ubuntu CE main menu icon has also been enhanced with an overlay to give it a more unique look. This is accomplished using gDesklets which also powers the desktop verse feature.