ubuntu tweak 0.2
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 1674
Ubuntu Tweak 0.4.3
Ubuntu Tweak is an application designed to config Ubuntu easier for everyone. more>> <<less
Download (823KB)
Added: 2009-04-27 License: Freeware Price:
179 downloads
Ubuntu 9.10
Ubuntu is regarded as such a beneficial and vital system for laptops, desktops and servers. more>> <<less
Download (700MB)
Added: 2009-10-08 License: Freeware Price:
downloads
Other version of Ubuntu
Ubuntu 7.04 (Feisty Fawn) Ubuntu is a Debian based linux distribution. Ubuntu 7.04 (Feisty ... Ubuntu is a Debian based linux distribution. Welcome to Feisty Fawn a.k.a Ubuntu 7.04License:GPL (GNU General Public License)
Ubuntu 6.10 (Edgy Eft) Ubuntu is a Debian based linux distribution. Ubuntu is a Debian based linux distribution. Main features: - Tomboy, an easy-to-use andLicense:GPL (GNU General Public License)
feature Ubuntu Linux Distribution. The install CD allows you to install Ubuntu permanently on ... community has to offer, to make Ubuntu usable by as many people as possible. - Ubuntu is releasedLicense:GPL (GNU General Public License)
Ubuntu Software - Ubuntu Ultimate Edition is an Ubuntu Feisty Fawn with a lot ofLicense:GPL (GNU General Public License)
bring the power of Ubuntu across to the users of Legacy systems. So not just to make a small linux ... linux based desktop Operating system (that has been done with Ubuntu Linux, Beatrix). The ideaLicense:GPL (GNU General Public License)
SlaBuntuVMware 0.2
SlaBuntuVMware is a useful installation suite for installing VMware Server on Slackware or Ubuntu. more>>
SlaBuntuVMware is a useful installation suite for installing VMware Server on Slackware or Ubuntu.
The project automatically downloads packages from the VMware site.
Tested on Slackware 11. (Slackware 10.2 might not work - try)
Tested on Ubuntu Desktop Dapper Drake and Ubuntu Desktop Edgy.
IMPORTANT: this suite does not include the vmware server packs,
they are downloaded from the official VMware site.
You also need a server key for activating the product that you must
get (for free) from the VMware web-site (http://www.vmware.com/server/)
INSTALLATION (Slackware Linux) :
a) 1- The perfect setup for running vmware on Slackware is:
Slackware 11 (When you install the OS leave a big partion for your
virtual machines).
Using a good server with an hardware raid controller:
Suggested Partition Table (scsi disks, if ide hda):
/dev/sda1 swap (megs?gb? depends on your system)
/dev/sda2 / 10Gb
/dev/sda3 /home 2Gb
/dev/sda4 /vm (160 Gb the rest for your virtual machines)
You must do a normal install with X support but no KDE.
2- Dropline Gnome (http://www.droplinegnome.net)
It is suggested you run gnome on Slackware 11. Gnome is not
included in the distro cds, therefore you must download
Dropline Gnome.
3- Kernel 2.6.x (with the kernel sources into /usr/src/linux)
(Default Kernel 2.4.33.3 works perfectly though)
CAUTION: take a look on www.vmware.com for the
supported kernel 2.6 versions.
OR
- If you have problems building 2.6.x vmware kernel module, just use
the normal 2.4.33.3 kernel supplied with your slackware, or try the test26.s
or huge26.s supplied with your slackware cds.
b) - The base setup for running vmware on Slackware is:
1- Slackware 11
2- Kde(not tested can have problems with some libraries)
(if you do not want to Download and install Dropline Gnome)
3- Kernel 2.4.33 (with the kernel sources into /usr/src/linux)
Using a normal pc with no raid controller (so you should use linux
raid software):
Suggested Partition Table (scsi disks, if ide hda):
/dev/md1 swap (megs?gb? depends on your system)
/dev/md2 / 10Gb
/dev/md3 /home 2Gb
/dev/md4 /vm (100 Gb? the rest for your virtual machines)
---------------------------------------------------------------------------
If you do not want to use Gnome or Kde go at the end of this file.
---------------------------------------------------------------------------
2) After making sure you have everything (including the kernel sources
inside /usr/src/linux) you can run:
3) as root ./setup.sh
4) follow the steps provided
(you can hit ENTER to most of the questions (90%)
4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)
6) under an X session: Run the command "vmware" and Enjoy vmware!
INSTALLATION (Ubuntu Desktop, Alternate,NOT Server):
1) edit /etc/apt/sources.list and uncomment all the lines starting with deb
2) open a terminal (xterm) and type "sudo ./setup.sh"
3) follow the steps provided
(you can hit ENTER to most of the questions (90%)
4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)
5) Run the command "vmware" and Enjoy vmware!
INSTALLATION ON UBUNTU SERVER
- Not tried yet, but you should at first download and install X11 and gnome
and then follow the steps provided for Ubuntu Desktop above.
IMPORTANT INFO:
- Remember that vmware server packs are downloaded from the official vmware
site and are property of the VMware Company: http://www.vmware.com/
- Remember that in order to use VMware you should accept the terms of the
VMware license that will be displayed during the installation process.
- Remember that in order to installa VMware you should ask the VMware
fellows for a key. Do this at the VMware site: http://www.vmware.com/
- To create virtual machines you should use the vmware console.
a) Run the command "vmware" and the vmware console starts up.
b) Then connect to localhost.
- After created a virtual machine to run it from the cmd line use:
bash# vmware-cmd vmname.vmx start
Author: Lorenzo Allori
#####################################################
If you do not have Gnome or Kde youll need the following:
#####################################################
- Slack with glibc and glibcsolibs installed. Make sure you
have X11 installed with a window manager.
Packages needed are:
glibc-2.3.6-i486-6.tgz
glibc-solibs-2.3.6-i486-6.tgz
kernel-source-2.4.33.3-noarch-1.tgz
x11-6.9.0-i486-11.tgz
x11-devel-6.9.0-i486-11.tgz
windowmaker-0.92.0-i486-1.tgz
You can find those on http://www.slackware.com.
Download them and to install those just type (as root):
# installpkg pkgname
When you have finished installing all the packages you need remember to run:
# ldconfig
- If you need a window manager you can install windowmaker:
# installpkg windowmaker-0.92-i486.tgz
# wmaker.inst
<<lessThe project automatically downloads packages from the VMware site.
Tested on Slackware 11. (Slackware 10.2 might not work - try)
Tested on Ubuntu Desktop Dapper Drake and Ubuntu Desktop Edgy.
IMPORTANT: this suite does not include the vmware server packs,
they are downloaded from the official VMware site.
You also need a server key for activating the product that you must
get (for free) from the VMware web-site (http://www.vmware.com/server/)
INSTALLATION (Slackware Linux) :
a) 1- The perfect setup for running vmware on Slackware is:
Slackware 11 (When you install the OS leave a big partion for your
virtual machines).
Using a good server with an hardware raid controller:
Suggested Partition Table (scsi disks, if ide hda):
/dev/sda1 swap (megs?gb? depends on your system)
/dev/sda2 / 10Gb
/dev/sda3 /home 2Gb
/dev/sda4 /vm (160 Gb the rest for your virtual machines)
You must do a normal install with X support but no KDE.
2- Dropline Gnome (http://www.droplinegnome.net)
It is suggested you run gnome on Slackware 11. Gnome is not
included in the distro cds, therefore you must download
Dropline Gnome.
3- Kernel 2.6.x (with the kernel sources into /usr/src/linux)
(Default Kernel 2.4.33.3 works perfectly though)
CAUTION: take a look on www.vmware.com for the
supported kernel 2.6 versions.
OR
- If you have problems building 2.6.x vmware kernel module, just use
the normal 2.4.33.3 kernel supplied with your slackware, or try the test26.s
or huge26.s supplied with your slackware cds.
b) - The base setup for running vmware on Slackware is:
1- Slackware 11
2- Kde(not tested can have problems with some libraries)
(if you do not want to Download and install Dropline Gnome)
3- Kernel 2.4.33 (with the kernel sources into /usr/src/linux)
Using a normal pc with no raid controller (so you should use linux
raid software):
Suggested Partition Table (scsi disks, if ide hda):
/dev/md1 swap (megs?gb? depends on your system)
/dev/md2 / 10Gb
/dev/md3 /home 2Gb
/dev/md4 /vm (100 Gb? the rest for your virtual machines)
---------------------------------------------------------------------------
If you do not want to use Gnome or Kde go at the end of this file.
---------------------------------------------------------------------------
2) After making sure you have everything (including the kernel sources
inside /usr/src/linux) you can run:
3) as root ./setup.sh
4) follow the steps provided
(you can hit ENTER to most of the questions (90%)
4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)
6) under an X session: Run the command "vmware" and Enjoy vmware!
INSTALLATION (Ubuntu Desktop, Alternate,NOT Server):
1) edit /etc/apt/sources.list and uncomment all the lines starting with deb
2) open a terminal (xterm) and type "sudo ./setup.sh"
3) follow the steps provided
(you can hit ENTER to most of the questions (90%)
4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)
5) Run the command "vmware" and Enjoy vmware!
INSTALLATION ON UBUNTU SERVER
- Not tried yet, but you should at first download and install X11 and gnome
and then follow the steps provided for Ubuntu Desktop above.
IMPORTANT INFO:
- Remember that vmware server packs are downloaded from the official vmware
site and are property of the VMware Company: http://www.vmware.com/
- Remember that in order to use VMware you should accept the terms of the
VMware license that will be displayed during the installation process.
- Remember that in order to installa VMware you should ask the VMware
fellows for a key. Do this at the VMware site: http://www.vmware.com/
- To create virtual machines you should use the vmware console.
a) Run the command "vmware" and the vmware console starts up.
b) Then connect to localhost.
- After created a virtual machine to run it from the cmd line use:
bash# vmware-cmd vmname.vmx start
Author: Lorenzo Allori
#####################################################
If you do not have Gnome or Kde youll need the following:
#####################################################
- Slack with glibc and glibcsolibs installed. Make sure you
have X11 installed with a window manager.
Packages needed are:
glibc-2.3.6-i486-6.tgz
glibc-solibs-2.3.6-i486-6.tgz
kernel-source-2.4.33.3-noarch-1.tgz
x11-6.9.0-i486-11.tgz
x11-devel-6.9.0-i486-11.tgz
windowmaker-0.92.0-i486-1.tgz
You can find those on http://www.slackware.com.
Download them and to install those just type (as root):
# installpkg pkgname
When you have finished installing all the packages you need remember to run:
# ldconfig
- If you need a window manager you can install windowmaker:
# installpkg windowmaker-0.92-i486.tgz
# wmaker.inst
Download (0.012MB)
Added: 2007-04-30 License: GPL (GNU General Public License) Price:
907 downloads
i815 linux tweak 0.1
i815 linux tweak project is i815-family chipset tweaker and optimizer for improve performance. more>>
i815 linux tweak project is i815-family chipset tweaker and optimizer for improve performance. Remember that some settings can crash your system.
USE AT YOUR OWN RISK
Installation:
From root user tpye "./install.sh".
If success, module will compile and plased into modules directory.
Usage:
modprobe i815tweak
Without any parameters nothing changes. In /proc/i815info you can see actual chipset settings.
Or see "dmesg" for error info..
For list all module parameters check "modinfo i815tweak".
cas=[2,3]
CAS# Latency (CL)
ras2cas=[2,3]
SDRAM RAS# to CAS# Delay (SRCD)
ras=[2,3]
SDRAM RAS# Precharge (SRP)
refX=[0-7]
SDRAM Mode Select (SMS). These bits select the operational mode of the MCH DRAM interface. The special modes are intended for initialization at power up.
0 = DRAM in Self-Refresh Mode, Refresh Disabled
1 = Normal Operation, 100 MHz System memory – Refresh interval 15.6 uSec
133 MHz System memory – Refresh interval 11.7 uSec
2 = Normal Operation, 100 MHz System memory – Refresh interval 7.8
133 MHz System memory – Refresh interval 5.85 uSec
3 = Normal Operation, 100 MHz System memory – Refresh interval 1.28 uSec
133 MHz System memory – Refresh interval 0.96 uSec
4 = NOP Command Enable. In this mode all processor cycles to SDRAM result in a NOP Command on the SDRAM interface.
5 = All Banks Precharge Enable. In this mode all processor cycles to SDRAM result in an All Banks Precharge Command on the SDRAM interface.
6 = Mode Register Set Enable. In this mode all processor cycles to SDRAM result in a mode register set command on the SDRAM interface.
7 = CBR Enable. In this mode all processor cycles to SDRAM result in a CBR cycle on the SDRAM interface.
dct57=[0, 1]
DRAM Cycle Time (DCT). This bit controls the number of SCLKs for an access cycle.
0 = Tras = 7 SCLKs and Trc = 9 SCLKs.
1 = Tras = 5 SCLKs and Trc = 7 SCLKs (Default)
bnr=[0,1]
Block New Request Lookahead
agp=[0,1]
AGP4X Override
sba=[0,1]
Sideband Address Enable (SBA)
1 = Enable. The sideband addressing mechanism is enabled.
0 = Disable
fw=[0,1]
Fast Writes Enable (FW). This bit must always be programmed to 0. The chipset will behave
unpredictably if this bit is programmed with 1.
cpc=[0,1]
Command per cycle
sm=[0,1]
SM Always Bypass
hacqs=[0,1]
Host Aperture Cycle Queue Slot
0 = Default value. No dedicated queue
1 = A dedicated queue slot is reserved
clt=[0,1]
CPU Latency Timer
0 = Deferrable processor cycle will be Deferred immediately after receiving another ADS#
1 = Deferrable processor cycle will only be Deferred after in has been held in a “Snoop Stall” for 31
clocks and another ADS# has arrived (default).
dpcp=[0,1]
DRAM Page Closing Policy (DPCP)
0 = Precharge All during the service of any “Page Miss” access.
1 = Precharge All during the service of any “Page Miss” access.
magwe=[0,1]
Memory Arbiter Grant Window Enable (MAGWE).
0 = Disabled. Enforce fixed priority.
1 = 24 clocks limiting host, 24 clocks guaranteed to low priority graphics stream.
EXAMPLE:
modprobe i815tweak cas=2 ras2cas=2 ras=2 bnr=1 dct57=1
For more info about i815 chipset settings see Intel Document Reference Number 290688-001, 290693-001 and 290693-002
<<lessUSE AT YOUR OWN RISK
Installation:
From root user tpye "./install.sh".
If success, module will compile and plased into modules directory.
Usage:
modprobe i815tweak
Without any parameters nothing changes. In /proc/i815info you can see actual chipset settings.
Or see "dmesg" for error info..
For list all module parameters check "modinfo i815tweak".
cas=[2,3]
CAS# Latency (CL)
ras2cas=[2,3]
SDRAM RAS# to CAS# Delay (SRCD)
ras=[2,3]
SDRAM RAS# Precharge (SRP)
refX=[0-7]
SDRAM Mode Select (SMS). These bits select the operational mode of the MCH DRAM interface. The special modes are intended for initialization at power up.
0 = DRAM in Self-Refresh Mode, Refresh Disabled
1 = Normal Operation, 100 MHz System memory – Refresh interval 15.6 uSec
133 MHz System memory – Refresh interval 11.7 uSec
2 = Normal Operation, 100 MHz System memory – Refresh interval 7.8
133 MHz System memory – Refresh interval 5.85 uSec
3 = Normal Operation, 100 MHz System memory – Refresh interval 1.28 uSec
133 MHz System memory – Refresh interval 0.96 uSec
4 = NOP Command Enable. In this mode all processor cycles to SDRAM result in a NOP Command on the SDRAM interface.
5 = All Banks Precharge Enable. In this mode all processor cycles to SDRAM result in an All Banks Precharge Command on the SDRAM interface.
6 = Mode Register Set Enable. In this mode all processor cycles to SDRAM result in a mode register set command on the SDRAM interface.
7 = CBR Enable. In this mode all processor cycles to SDRAM result in a CBR cycle on the SDRAM interface.
dct57=[0, 1]
DRAM Cycle Time (DCT). This bit controls the number of SCLKs for an access cycle.
0 = Tras = 7 SCLKs and Trc = 9 SCLKs.
1 = Tras = 5 SCLKs and Trc = 7 SCLKs (Default)
bnr=[0,1]
Block New Request Lookahead
agp=[0,1]
AGP4X Override
sba=[0,1]
Sideband Address Enable (SBA)
1 = Enable. The sideband addressing mechanism is enabled.
0 = Disable
fw=[0,1]
Fast Writes Enable (FW). This bit must always be programmed to 0. The chipset will behave
unpredictably if this bit is programmed with 1.
cpc=[0,1]
Command per cycle
sm=[0,1]
SM Always Bypass
hacqs=[0,1]
Host Aperture Cycle Queue Slot
0 = Default value. No dedicated queue
1 = A dedicated queue slot is reserved
clt=[0,1]
CPU Latency Timer
0 = Deferrable processor cycle will be Deferred immediately after receiving another ADS#
1 = Deferrable processor cycle will only be Deferred after in has been held in a “Snoop Stall” for 31
clocks and another ADS# has arrived (default).
dpcp=[0,1]
DRAM Page Closing Policy (DPCP)
0 = Precharge All during the service of any “Page Miss” access.
1 = Precharge All during the service of any “Page Miss” access.
magwe=[0,1]
Memory Arbiter Grant Window Enable (MAGWE).
0 = Disabled. Enforce fixed priority.
1 = 24 clocks limiting host, 24 clocks guaranteed to low priority graphics stream.
EXAMPLE:
modprobe i815tweak cas=2 ras2cas=2 ras=2 bnr=1 dct57=1
For more info about i815 chipset settings see Intel Document Reference Number 290688-001, 290693-001 and 290693-002
Download (0.005MB)
Added: 2007-06-06 License: GPL (GNU General Public License) Price:
875 downloads
Ubuntu Studio 9.04
Ubuntu Studio is a fantastic project which is used for creating multimedia. more>> <<less
Added: 2009-04-23 License: GPL Price: FREE
1 downloads
Other version of Ubuntu Studio
Ubuntu Studio project is a multimedia creation flavor of Ubuntu. multimedia creation flavor of Ubuntu. Ubuntu Studio is aimed at the GNU/Linux audio, video andLicense:GPL (GNU General Public License)
Optimoz Tweaks 0.4
Optimoz Tweaks automatically performs actions based on the cursor. more>>
Optimoz Tweaks automatically performs actions based on the cursor.
Automatically shows the sidebar when the mouse cursor touches the left window border, and closes it when the cursor is over the web page again.
<<lessAutomatically shows the sidebar when the mouse cursor touches the left window border, and closes it when the cursor is over the web page again.
Download (0.015MB)
Added: 2007-04-07 License: MPL (Mozilla Public License) Price:
556 downloads
Ubuntu Muslim Edition 0.2
Ubuntu Muslim Edition is a free, open source operating system based on the popular Ubuntu Linux. more>>
Ubuntu Muslim Edition is a free, open source operating system based on the popular Ubuntu Linux. UbuntuME stands for Ubuntu Muslim Edition.
What is Linux?
Linux is a free, efficient and secured operating system. Unlike Micro$oft Windows and other proprietary systems, Linux is publicly open and extendible by contributors.
What is Ubuntu?
Ubuntu is a popular Linux distribution, designed with the intent of overthrowing Micro$oft Windows as the worlds most widely-used operating system.
The distro is composed entirely of open source components, which have been heavily modified for easy of use and migration for users familiar with Micro$oft Windows, take a look here. The name Ubuntu is derived from the Zulu word for humanity, which has been incorporated into South African culture as "humanity towards others".
Ubuntu Muslim Edition customize the Ubuntu distro by installing islamic softwares (prayer times, Quran study tool, Arabic learning software etc.) and by changing its "look".
Enhancements:
- Same version as v0.1 but size reduced to fit on a CD (java5 has been removed but there is java4 installed by default
<<lessWhat is Linux?
Linux is a free, efficient and secured operating system. Unlike Micro$oft Windows and other proprietary systems, Linux is publicly open and extendible by contributors.
What is Ubuntu?
Ubuntu is a popular Linux distribution, designed with the intent of overthrowing Micro$oft Windows as the worlds most widely-used operating system.
The distro is composed entirely of open source components, which have been heavily modified for easy of use and migration for users familiar with Micro$oft Windows, take a look here. The name Ubuntu is derived from the Zulu word for humanity, which has been incorporated into South African culture as "humanity towards others".
Ubuntu Muslim Edition customize the Ubuntu distro by installing islamic softwares (prayer times, Quran study tool, Arabic learning software etc.) and by changing its "look".
Enhancements:
- Same version as v0.1 but size reduced to fit on a CD (java5 has been removed but there is java4 installed by default
Download (702MB)
Added: 2007-03-05 License: GPL (GNU General Public License) Price:
608 downloads
Ubuntu Bootloader Manager 0.2
Ubuntu Bootloader Manager is a graphical user interface for configuring GRUBs menu.lst. more>>
Ubuntu Bootloader Manager is a graphical user interface (GUI) for configuring GRUBs menu.lst.
This app is still very alpha, use at your own risk and make sure to make a backup of our grub config file (/boot/grub/menu.lst).
<<lessThis app is still very alpha, use at your own risk and make sure to make a backup of our grub config file (/boot/grub/menu.lst).
Download (MB)
Added: 2007-08-20 License: GPL (GNU General Public License) Price:
699 downloads
QUnitTester 0.2
QUnitTester is a Qt4 binary unit tester. more>>
QUnitTester is a Qt4 binary unit tester.
Everyone who uses JUnitTesting knows about the "green bar". Qt has great possibilities for Unit Testing but i missed the green bar.
If you want to know more about Unit Testing in Qt take a look at: http://doc.trolltech.com/4.2/qtestlib-manual.html
and http://doc.trolltech.com/4.2/qtestlib-tutorial.html
The software doesnt much yet. It only runs all tests...
INSTALL:
qmake (from qt 4, in (k)ubuntu for example qmake-qt4)
make
as root: make install
USAGE:
Write your testclass and compile it. Start the program and click on Test Binary...
Choose the compiled binary.
Click on start.
Enhancements:
- Possibility to use options
- Select test(s) to run
<<lessEveryone who uses JUnitTesting knows about the "green bar". Qt has great possibilities for Unit Testing but i missed the green bar.
If you want to know more about Unit Testing in Qt take a look at: http://doc.trolltech.com/4.2/qtestlib-manual.html
and http://doc.trolltech.com/4.2/qtestlib-tutorial.html
The software doesnt much yet. It only runs all tests...
INSTALL:
qmake (from qt 4, in (k)ubuntu for example qmake-qt4)
make
as root: make install
USAGE:
Write your testclass and compile it. Start the program and click on Test Binary...
Choose the compiled binary.
Click on start.
Enhancements:
- Possibility to use options
- Select test(s) to run
Download (0.027MB)
Added: 2007-04-08 License: GPL (GNU General Public License) Price:
929 downloads
Kubuntu 7.04 (Feisty Fawn)
Kubuntu is an Ubuntu-derived distribution. more>>
Kubuntu is an Ubuntu-derived distribution. The Kubuntu CDs are made up of Ubuntus base plus KDE. You can get exactly the same effect by installing Ubuntu and adding the KDE packages from the Ubuntu archives.
Kubuntu is the result of several months effort to get KDE 3.4 into Ubuntus main repository and create the first major derived Ubuntu distribution. Kubuntu is not a fork of Ubuntu but an official project of it, sharing the same package archive and infrastructure. It is possible to convert an Ubuntu system to Kubuntu or vice versa.
<<lessKubuntu is the result of several months effort to get KDE 3.4 into Ubuntus main repository and create the first major derived Ubuntu distribution. Kubuntu is not a fork of Ubuntu but an official project of it, sharing the same package archive and infrastructure. It is possible to convert an Ubuntu system to Kubuntu or vice versa.
Download (695MB)
Added: 2007-04-19 License: GPL (GNU General Public License) Price:
932 downloads
Other version of Kubuntu
same effect by installing Ubuntu and adding the KDE packages from the Ubuntu archives. main repository and create the first major derived Ubuntu distribution. Kubuntu is not a forkLicense:GPL (GNU General Public License)
same effect by installing Ubuntu and adding the KDE packages from the Ubuntu archives. tweaked to Ubuntu standards while remaining true to KDE. Changes include sudo support, anLicense:GPL (GNU General Public License)
License:GPL (GNU General Public License)
Xubuntu 7.04 (Feisty Fawn)
Xubuntu is a nice Ubuntu desktop experience with Xfce4. more>>
Xubuntu community projects aim is to provide a nice Ubuntu desktop experience (even on older hardware) by using Xfce4 as the desktop environment and GTK+ 2 applications wherever possible.
Xfce4 has been supported in Ubuntus universe by the MOTUXfce team since Hoary and Breezy. For Dapper we want to go one step further and make Xubuntu a sibling of Ubuntu, Kubuntu, and Edubuntu by having install and live CD images generated for it.
As Ubuntu has a delay of six weeks with a new release date of the first of June, Xubuntu should be released at the same time and should use the latest stable Xfce 4.X code (hopefully 4.4 will be released by then).
<<lessXfce4 has been supported in Ubuntus universe by the MOTUXfce team since Hoary and Breezy. For Dapper we want to go one step further and make Xubuntu a sibling of Ubuntu, Kubuntu, and Edubuntu by having install and live CD images generated for it.
As Ubuntu has a delay of six weeks with a new release date of the first of June, Xubuntu should be released at the same time and should use the latest stable Xfce 4.X code (hopefully 4.4 will be released by then).
Download (686MB)
Added: 2007-04-19 License: GPL (GNU General Public License) Price:
896 downloads
Other version of Xubuntu
Xubuntu is a nice Ubuntu desktop experience with Xfce4. Xubuntu 6.10 (Edgy Eft) - Canonical ... Ubuntu, Kubuntu, and Edubuntu by having install and live CD images generated for it. As UbuntuLicense:GPL (GNU General Public License)
Xubuntu is a linux distibution derived from Ubuntu that uses Xfce as desktop manager. Xubuntu 5 ... Xubuntu is a linux distibution derived from Ubuntu that uses Xfce as desktop manager. The aim ofLicense:GPL (GNU General Public License)
Ubuntu Forums Menu 0.59
Ubuntu Forums Menu is an extension that adds additional navigation and search menu for Ubuntu Forums. more>> <<less
Added: 2008-04-25 License: MPL Price: FREE
38 downloads
Kubuntu Human Theme 0.9
Kubuntu Human Theme was created because I started to like the Ubuntu Human theme and when I switched to KDE, I was missing it. more>>
Kubuntu Human Theme was created because I started to like the Ubuntu Human theme and when I switched to KDE, I was missing it there. The theme is assembled from various Ubuntu style items, most of which can be found on KDE-look: Ubuntu Cristal background, Human (Revised) color scheme, nuoveXT icons, Ubuntu Kmenu icon, SoftGlow Orange kicker, default Plastik style and Crystal window deco.
Installation of .kth file thru KDE Control Center--Theme Manager--Install; then, if you want exactly the same look, get and install the above items (search on KDE-look). The Kmenu can be changed by replacing each kmenu.png in /usr/share/icons/nuovext/[SIZE]/apps/ Then refresh your icon set.
<<lessInstallation of .kth file thru KDE Control Center--Theme Manager--Install; then, if you want exactly the same look, get and install the above items (search on KDE-look). The Kmenu can be changed by replacing each kmenu.png in /usr/share/icons/nuovext/[SIZE]/apps/ Then refresh your icon set.
Download (MB)
Added: 2007-04-16 License: GPL (GNU General Public License) Price:
946 downloads
Edubuntu 7.04 (Feisty Fawn)
Edubuntu is a version of the Ubuntu operating system suitable for classroom use. more>>
Edubuntu is a version of the Ubuntu operating system suitable for classroom use. As an educator youll be able to set up a computer lab, or establish an online learning environment, in an hour or less -- then administer that environment without having to become a fully-fledged Linux geek.
Edubuntu is currently under development by the same development team that produces the wildly popular Ubuntu system. Edubuntu a customized version of Ubuntu.
Principal design goals of Edubuntu are centralized management of configuration, users, and processes, together with facilities for working collaboratively in a classroom setting. Equally important is the gathering together of the best available free software and digital materials for education.
<<lessEdubuntu is currently under development by the same development team that produces the wildly popular Ubuntu system. Edubuntu a customized version of Ubuntu.
Principal design goals of Edubuntu are centralized management of configuration, users, and processes, together with facilities for working collaboratively in a classroom setting. Equally important is the gathering together of the best available free software and digital materials for education.
Download (565MB)
Added: 2007-04-19 License: GPL (GNU General Public License) Price:
930 downloads
Other version of Edubuntu
Edubuntu is a version of the Ubuntu operating system suitable for classroom use. As an educator ... Edubuntu a customized version of Ubuntu. Principal design goals of Edubuntu are centralizedLicense:GPL (GNU General Public License)
License:GPL (GNU General Public License)
Edubuntu is a version of the Ubuntu operating system suitable for classroom use. Edubuntu is a version of the Ubuntu operating system suitable for classroom use. As an educatorLicense:GPL (GNU General Public License)
Ubuntu Common Hooker 0.1
Ubuntu Common Hooker aims to provide an interface for unknown file extensions to automatically install a certain packages. more>>
Ubuntu Common Hooker project aims to provide an interface for unknown file extensions to automatically install a certain packages when its called.
Use cases
Eduard is a schizophrenic, however his only obession and a way to calm him down is listening to "Veronika Plays Piano, volume 1" which is encoded in MP3. Veronika is his friend who recently got a copy of Ubuntu Linux, and tried it on Eduards computer. However, Eduard just find out that he cant play his MP3s.
Dr. Igor use ".rar" extension to compress his research, however, Villete decides to migrate to Ubuntu Linux. But when Dr. Igor tryies to open "Vitriol.rar, and Zedka.rar", it says "Error cannot open file!"
Okonkwo tried Ubuntu Linux for the first time, however, when he tried to open "Wresting with Amalinze.mpg", he is prompted that "there are no codecs to view this file", However, Okonkwos father Onuka had no problems opening .mpg files, but Okonkwo doesnt like to use Windows like his father did.
<<lessUse cases
Eduard is a schizophrenic, however his only obession and a way to calm him down is listening to "Veronika Plays Piano, volume 1" which is encoded in MP3. Veronika is his friend who recently got a copy of Ubuntu Linux, and tried it on Eduards computer. However, Eduard just find out that he cant play his MP3s.
Dr. Igor use ".rar" extension to compress his research, however, Villete decides to migrate to Ubuntu Linux. But when Dr. Igor tryies to open "Vitriol.rar, and Zedka.rar", it says "Error cannot open file!"
Okonkwo tried Ubuntu Linux for the first time, however, when he tried to open "Wresting with Amalinze.mpg", he is prompted that "there are no codecs to view this file", However, Okonkwos father Onuka had no problems opening .mpg files, but Okonkwo doesnt like to use Windows like his father did.
Download (0.020MB)
Added: 2006-06-01 License: GPL (GNU General Public License) Price:
1241 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above ubuntu tweak 0.2 search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
