type1 urw fonts with cyrillics 1.0.7pre43
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 541
Type1 URW fonts with Cyrillics 1.0.7pre43
Type1 URW fonts with Cyrillics is a set of fonts known as urw-fonts or gnu-gs-fonts with the addition of cyrillic glyphs. more>>
Type1 URW fonts with Cyrillics is a set of fonts known as urw-fonts or gnu-gs-fonts with the addition of cyrillic glyphs.
Nimbus Sans L Regular, Nimbus Mono L Regular, Nimbus Mono L Oblique all come from a more recent version of the cyrillic URW fonts.
The hints on Nimbus Sans Regular have been modified in the following ways:
25 June 2002
- Added ghost hint to the top of 4 to keep it from being taller than the other digits.
- Reduced the width of the left stem hint for H to 83 (probably no real differences)
- Changed the StemSnapV values from [78 85 94] to [78 83 92] (and fixed up StdVW accordingly) This corresponds to the values in the font (which are 83/93 for lower case and upper case stems) better and makes the width-88 stems on M and N snap to to upper case widths not lower-case widths.
29 June 2002
- Removed odd vertical stem hints (width of horizontal stems) from f, F, t, E, yen sign, fi ligature, fl ligature, AE ligature, R, Lstroke, OE ligature, lstroke, E" variants, t, variants, Eth, Dstoke, etc.
- Fixed hints on 1 to be two ghost hints instead of one hint the height of the font
- fix bottom stem of u to have integer coordinates
- fixed hints on |
- fixed hints on inverted exclamation mark
The hints on Nimbus Mono L Oblique have been modified in the
following ways:
- Removed vertical stem hints from horizontal serifs on roman characters.
Enhancements:
- A lot of non-Russian Cyrillic glyph were fixed.
- All glyphs that have not yet been fixed were excluded from the distributed version.
<<lessNimbus Sans L Regular, Nimbus Mono L Regular, Nimbus Mono L Oblique all come from a more recent version of the cyrillic URW fonts.
The hints on Nimbus Sans Regular have been modified in the following ways:
25 June 2002
- Added ghost hint to the top of 4 to keep it from being taller than the other digits.
- Reduced the width of the left stem hint for H to 83 (probably no real differences)
- Changed the StemSnapV values from [78 85 94] to [78 83 92] (and fixed up StdVW accordingly) This corresponds to the values in the font (which are 83/93 for lower case and upper case stems) better and makes the width-88 stems on M and N snap to to upper case widths not lower-case widths.
29 June 2002
- Removed odd vertical stem hints (width of horizontal stems) from f, F, t, E, yen sign, fi ligature, fl ligature, AE ligature, R, Lstroke, OE ligature, lstroke, E" variants, t, variants, Eth, Dstoke, etc.
- Fixed hints on 1 to be two ghost hints instead of one hint the height of the font
- fix bottom stem of u to have integer coordinates
- fixed hints on |
- fixed hints on inverted exclamation mark
The hints on Nimbus Mono L Oblique have been modified in the
following ways:
- Removed vertical stem hints from horizontal serifs on roman characters.
Enhancements:
- A lot of non-Russian Cyrillic glyph were fixed.
- All glyphs that have not yet been fixed were excluded from the distributed version.
Download (3.0MB)
Added: 2007-08-04 License: GPL (GNU General Public License) Price:
537 downloads
Hamster Font Manager 1.02
Hamster Font Manager is an easy GUI to manage fonts for X11/GS/TeX. more>>
HFM is a font manager for Unix systems. With it you can control the avaliability of fonts in all of the supported applications from a central place. Currently included are modules to support:
* X-Window
* Ghostscript
* TeX
A PostScript module handles PS Fonts. Other fonts remain untouched by this program.
HFM is distributed under the GPL (GNU Public License).
<<less* X-Window
* Ghostscript
* TeX
A PostScript module handles PS Fonts. Other fonts remain untouched by this program.
HFM is distributed under the GPL (GNU Public License).
Download (0.23MB)
Added: 2005-04-21 License: GPL (GNU General Public License) Price:
1647 downloads
Gentium fonts 1.02
Gentium is a typeface family designed to enable the diverse ethnic groups around the world. more>>
Gentium is a typeface family designed to enable the diverse ethnic groups around the world who use the Latin script to produce readable, high-quality publications.
Gentium fonts project supports a wide range of Latin-based alphabets and includes glyphs that correspond to all the Latin ranges of Unicode.
The design is intended to be highly readable, reasonably compact, and visually attractive. The additional "extended" Latin letters are designed to naturally harmonize with the traditional 26 ones. Diacritics are treated with careful thought and attention to their use.
Gentium also supports both ancient and modern Greek, including a number of alternate forms. These fonts were originally the product of two years of research and study by the designer at the University of Reading, England, as part of an MA program in Typeface Design.
SIL International has now embraced the Gentium project, and plans to continue development. Expansion of the glyph set to include more extended Latin glyphs, archaic Greek symbols, and full Cyrillic script support is the next step. Work on this has already begun, but the results will not be available for a few months. Addition of bold and bold italic faces will follow.
Gentium is freely available and may be used by anyone at no cost. It is now released under the SIL Open Font License, a free and open source license that permits modification and redistribution.
Our hope is that it will stimulate literature production and elevate extended Latin alphabets to greater parity with the basic Latin alphabet. We also hope it will encourage other type designers to appreciate and support those fascinating and beautiful extra letters.
<<lessGentium fonts project supports a wide range of Latin-based alphabets and includes glyphs that correspond to all the Latin ranges of Unicode.
The design is intended to be highly readable, reasonably compact, and visually attractive. The additional "extended" Latin letters are designed to naturally harmonize with the traditional 26 ones. Diacritics are treated with careful thought and attention to their use.
Gentium also supports both ancient and modern Greek, including a number of alternate forms. These fonts were originally the product of two years of research and study by the designer at the University of Reading, England, as part of an MA program in Typeface Design.
SIL International has now embraced the Gentium project, and plans to continue development. Expansion of the glyph set to include more extended Latin glyphs, archaic Greek symbols, and full Cyrillic script support is the next step. Work on this has already begun, but the results will not be available for a few months. Addition of bold and bold italic faces will follow.
Gentium is freely available and may be used by anyone at no cost. It is now released under the SIL Open Font License, a free and open source license that permits modification and redistribution.
Our hope is that it will stimulate literature production and elevate extended Latin alphabets to greater parity with the basic Latin alphabet. We also hope it will encourage other type designers to appreciate and support those fascinating and beautiful extra letters.
Download (2.2MB)
Added: 2005-12-28 License: Freely Distributable Price:
1401 downloads
Opcion Font Viewer 1.1.1
Opcion Font Viewer is a TrueType font viewer. more>>
Opcion Font Viewer is a free font viewer written in Java that allows you to view both installed and uninstalled TrueType fonts on Windows, Linux, Unix or Mac.
The main focus of Opcion is to allow you to view your uninstalled fonts so that you install only the fonts you want and keep your system memory free of fonts you dont want.
As you may have experienced, installing the brand new 1000 fonts font pack you just bought on your Windows, Linux, Unix or Mac computer can lead to slow-downs when starting the computer and when loading other programs.
The slow down occurs because the Operating System and certain programs (e.g. word-processors, email clients, graphics editors) need to load all system fonts so that they can be made available to you at any time. This is where Opcion comes in.
Opcion was written to handle the viewing of large font collections, therefore only fonts that you are currently viewing are stored in memory. Although the amount of physical memory you have will effect how many fonts you can view at a time, it will no longer be a limitation to you making use of your entire font library.
Another problem with most Operating Systems default font viewers is that while they are capable of viewing fonts, the default Windows/Linux/Unix font viewers only allows you to view fonts that are already installed and one at a time. Opcion allows you to view TrueType fonts located anywhere and allows you to view system fonts as well.
To help you pick the best font for the job, whether it be for your assignment, project logo or webpage, Opcion provides a list view of either system or other/uninstalled fonts so you may see how a font looks compared to other fonts in your collection.
When you see a font that you feel suits your current job you can simply click on it in the list view and it will be added to a favourites list that can then be saved for future reference or used to install only the fonts you want.
For viewing fonts, seeing how they would appear applied to your name/logo/tagline, and keeping track of which fonts best suit the job is the purpose of Opcion Font Viewer. Opcion allows you to view both installed and uninstalled fonts in different views depending on your needs. Written in Java, Opcion will work on all platforms that the Java Runtime Environment supports (which includes Windows, Mac, Solaris & Linux).
Opcion Font Viewer provdies a default view that allows you to view one font at a time, and a list view which allows you to view multiple fonts at a time. By clicking on fonts you like in the list view you are adding fonts to a faviourties list that Opcion keeps for you. The faviourites list can then be saved for future reference or used in finding out the file names of fonts you wish to install.
Main features:
- Viewing of installed/uninstalled fonts.
- List view of installed/uninstalled fonts.
- Adding/removing of favourite fonts.
- Saving of favourite fonts.
- Customizable sample/display text.
- Customizable font size.
- Customizable font properties (bold, italic, etc.) in sample text area.
- Changeable fonts displayed per page in List View.
Execute Opcion Font Viewer
To execute Opcion Font Viewer in Windows, download the EXE version. For Linux users use the command "java -jar Opcion_v1.1.1.jar" in console/terminal/shortcut.
Exception in thread "main" java.lang.UnsatisfiedLinkError: /usr/java/j2re1.4.1_02/lib/i386/libfontmanager.so: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
This error occurs due to backwards compatibility issues with the Java Runtime and libstdc. To fix this problem for RedHat 9.0 install the RPM file compat-libstdc++-7.3.2.96.118.i386.rpm, which can be found on disc 1 of the downloadable distro. For other Linux distributions check rpmfind.net for libstdc++-libc6.1-1.so.2 to see what package you need to install.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x4CAEE920 Function=(null)+0x4CAEE920 Library=/usr/local/lib/SunJava2-1.4.2/lib/i386/libfontmanager.so
This error appears to be a problem with Sun Microsystems Java implementation for Linux, the real cause for this crash is still being investigated. There are no solutions to this problem yet.
Opcion crashes during execution when using Blackdown Java Virtual Machine.
Opcion Font Viewer was programmed for Sun Microsystems JVM, and it uses Suns Java API extensively. Thus, it is highly recommended that you use the latest Java Runtime Environment instead of other JVMs.
Enhancements:
- Added sorting to other fonts list.
<<lessThe main focus of Opcion is to allow you to view your uninstalled fonts so that you install only the fonts you want and keep your system memory free of fonts you dont want.
As you may have experienced, installing the brand new 1000 fonts font pack you just bought on your Windows, Linux, Unix or Mac computer can lead to slow-downs when starting the computer and when loading other programs.
The slow down occurs because the Operating System and certain programs (e.g. word-processors, email clients, graphics editors) need to load all system fonts so that they can be made available to you at any time. This is where Opcion comes in.
Opcion was written to handle the viewing of large font collections, therefore only fonts that you are currently viewing are stored in memory. Although the amount of physical memory you have will effect how many fonts you can view at a time, it will no longer be a limitation to you making use of your entire font library.
Another problem with most Operating Systems default font viewers is that while they are capable of viewing fonts, the default Windows/Linux/Unix font viewers only allows you to view fonts that are already installed and one at a time. Opcion allows you to view TrueType fonts located anywhere and allows you to view system fonts as well.
To help you pick the best font for the job, whether it be for your assignment, project logo or webpage, Opcion provides a list view of either system or other/uninstalled fonts so you may see how a font looks compared to other fonts in your collection.
When you see a font that you feel suits your current job you can simply click on it in the list view and it will be added to a favourites list that can then be saved for future reference or used to install only the fonts you want.
For viewing fonts, seeing how they would appear applied to your name/logo/tagline, and keeping track of which fonts best suit the job is the purpose of Opcion Font Viewer. Opcion allows you to view both installed and uninstalled fonts in different views depending on your needs. Written in Java, Opcion will work on all platforms that the Java Runtime Environment supports (which includes Windows, Mac, Solaris & Linux).
Opcion Font Viewer provdies a default view that allows you to view one font at a time, and a list view which allows you to view multiple fonts at a time. By clicking on fonts you like in the list view you are adding fonts to a faviourties list that Opcion keeps for you. The faviourites list can then be saved for future reference or used in finding out the file names of fonts you wish to install.
Main features:
- Viewing of installed/uninstalled fonts.
- List view of installed/uninstalled fonts.
- Adding/removing of favourite fonts.
- Saving of favourite fonts.
- Customizable sample/display text.
- Customizable font size.
- Customizable font properties (bold, italic, etc.) in sample text area.
- Changeable fonts displayed per page in List View.
Execute Opcion Font Viewer
To execute Opcion Font Viewer in Windows, download the EXE version. For Linux users use the command "java -jar Opcion_v1.1.1.jar" in console/terminal/shortcut.
Exception in thread "main" java.lang.UnsatisfiedLinkError: /usr/java/j2re1.4.1_02/lib/i386/libfontmanager.so: libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory
This error occurs due to backwards compatibility issues with the Java Runtime and libstdc. To fix this problem for RedHat 9.0 install the RPM file compat-libstdc++-7.3.2.96.118.i386.rpm, which can be found on disc 1 of the downloadable distro. For other Linux distributions check rpmfind.net for libstdc++-libc6.1-1.so.2 to see what package you need to install.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x4CAEE920 Function=(null)+0x4CAEE920 Library=/usr/local/lib/SunJava2-1.4.2/lib/i386/libfontmanager.so
This error appears to be a problem with Sun Microsystems Java implementation for Linux, the real cause for this crash is still being investigated. There are no solutions to this problem yet.
Opcion crashes during execution when using Blackdown Java Virtual Machine.
Opcion Font Viewer was programmed for Sun Microsystems JVM, and it uses Suns Java API extensively. Thus, it is highly recommended that you use the latest Java Runtime Environment instead of other JVMs.
Enhancements:
- Added sorting to other fonts list.
Download (0.35MB)
Added: 2005-04-21 License: GPL (GNU General Public License) Price:
1673 downloads
Bit-mapped Japanese font parser 2.0
Bit-mapped Japanese font parser is a font parser. more>>
Bit-mapped Japanese font parser is a font parser. Note, this package doesnt include the actual font data. To get the font data you need to download it from the download section in the left.
Then move *.jfr into the directory where you unpacked this parser, and follow with the quick instructions.
Quick instructions:
Complete parse requires about 4 megabytes of free disk space. This is a huge improvement over the original version which required almost 45 megabytes.
1. make
2. make parse
3. watch the progress indicator
4. mv *.pcf.gz /usr/X11R/lib/X11R6/fonts/misc
5. make clean
6. HUP your font server if you use one
7. xset fp rehash
8. xlsfonts | grep kanji
/usr/X11R/lib/X11R6/fonts/misc is the standard location for all sorts of random bit-mapped fonts, but you might have a special location. Substitute that in step 4.
About:
I came across a number of these "raster fonts" a while ago. Quick look inside the files proved that they are bit-mapped fonts, and the format looked pretty straight-forward. I wrote the original parser for these just guessing the values, basically by experimenting and playing around. Later on I came across some docs on the subject - looks like these fonts were used in Windows 3.1 Japanese edition to substitute back-then low quality Japanese TTF fonts at small point sizes. These were designed using full-scale 16 bit programming techniques.
Quick info about the font format, there are some headers, then follows a "segment table" which is basically a table with pointers inside the font file where to locate a particular chunk of data. Because the 16 bit way of accessing memory is by using 65k "segments", each file is virtually split into < 65k segments which get loaded into separate memory areas, and then there is a algorithm how to assemble whatever character by using the segment number and offset. Anyway, with 32 bit access all of that doesnt really matter. In my implementation I just mmap the whole file and read it all out of memory.
Generating table.h was a LOT of work! First, I took the codearea table out of one of the jfr files (this maps shift-jis code to the character number inside the font file), and extracted the number ranges. These were shift-jis, of course, and X uses jis0208. There is no converter from a shift
jis byte into jis0208. So I had to write one. Taking iconv, and some tables from glibc 2.1.93, I hacked together something which converted the shift-jis data into ucs4 (unicode, I guess) and then from that into jis0208. The code to the converter is about 500k thanks to the huge jis->unicode->jis conversion tables, and you wont need it unless you get a jfr font with a different encoding table (unlikely). Anyway. After I got the font format figured out and converted the character table, everything else was pretty easy. Note some bit hackery in the bitmapXX() functions which was necessary to present the font data in a usable format. Also notice cool use of function pointers to select a conversion function at runtime.
Enhancements:
- This version uses correct JISX0208 tables, and is much faster.
<<lessThen move *.jfr into the directory where you unpacked this parser, and follow with the quick instructions.
Quick instructions:
Complete parse requires about 4 megabytes of free disk space. This is a huge improvement over the original version which required almost 45 megabytes.
1. make
2. make parse
3. watch the progress indicator
4. mv *.pcf.gz /usr/X11R/lib/X11R6/fonts/misc
5. make clean
6. HUP your font server if you use one
7. xset fp rehash
8. xlsfonts | grep kanji
/usr/X11R/lib/X11R6/fonts/misc is the standard location for all sorts of random bit-mapped fonts, but you might have a special location. Substitute that in step 4.
About:
I came across a number of these "raster fonts" a while ago. Quick look inside the files proved that they are bit-mapped fonts, and the format looked pretty straight-forward. I wrote the original parser for these just guessing the values, basically by experimenting and playing around. Later on I came across some docs on the subject - looks like these fonts were used in Windows 3.1 Japanese edition to substitute back-then low quality Japanese TTF fonts at small point sizes. These were designed using full-scale 16 bit programming techniques.
Quick info about the font format, there are some headers, then follows a "segment table" which is basically a table with pointers inside the font file where to locate a particular chunk of data. Because the 16 bit way of accessing memory is by using 65k "segments", each file is virtually split into < 65k segments which get loaded into separate memory areas, and then there is a algorithm how to assemble whatever character by using the segment number and offset. Anyway, with 32 bit access all of that doesnt really matter. In my implementation I just mmap the whole file and read it all out of memory.
Generating table.h was a LOT of work! First, I took the codearea table out of one of the jfr files (this maps shift-jis code to the character number inside the font file), and extracted the number ranges. These were shift-jis, of course, and X uses jis0208. There is no converter from a shift
jis byte into jis0208. So I had to write one. Taking iconv, and some tables from glibc 2.1.93, I hacked together something which converted the shift-jis data into ucs4 (unicode, I guess) and then from that into jis0208. The code to the converter is about 500k thanks to the huge jis->unicode->jis conversion tables, and you wont need it unless you get a jfr font with a different encoding table (unlikely). Anyway. After I got the font format figured out and converted the character table, everything else was pretty easy. Note some bit hackery in the bitmapXX() functions which was necessary to present the font data in a usable format. Also notice cool use of function pointers to select a conversion function at runtime.
Enhancements:
- This version uses correct JISX0208 tables, and is much faster.
Download (0.020MB)
Added: 2006-10-19 License: GPL (GNU General Public License) Price:
1101 downloads
Hunky Fonts 0.3
Free Unicode TrueType fonts for Baltic, Central European, South European and other languages. more>>
Free Unicode TrueType fonts for Baltic, Central European, South European and other languages, including Azeri, Maori, Welsh and Esperanto.
<<less Download (0.24MB)
Added: 2005-04-18 License: LGPL (GNU Lesser General Public License) Price:
1658 downloads
Yet Another V4L Application 0.9
Yet Another V4L Application (or yava for short) is lightweight v4l framegrabber with support for TrueType fonts and ftp-upload. more>>
Yet Another V4L Application (or yava for short) is lightweight v4l framegrabber with support for TrueType fonts and ftp-upload.
Yet Another V4L Application project is written in ANSI C.
It uses Andreas Schifflers excellent SDL_bgrab library for frame grabbing, SDL for internal image manipulation, SDL_ttf for TrueType font rendering, libcurl for ftp uploads and libpng for snapshot writing.
Main features:
- Lightweight, using pretty standard libraries
- Tuner support
- FTP-upload (active and passive modes)
- TrueType font rendering
- Text color (RGB) selection
- Vertical text positioning (top, center, bottom)
- Horisontal text positioning (left, center, right)
- Font selection and number of pts
- Snapshots in png
- Live viewer or console mode
<<lessYet Another V4L Application project is written in ANSI C.
It uses Andreas Schifflers excellent SDL_bgrab library for frame grabbing, SDL for internal image manipulation, SDL_ttf for TrueType font rendering, libcurl for ftp uploads and libpng for snapshot writing.
Main features:
- Lightweight, using pretty standard libraries
- Tuner support
- FTP-upload (active and passive modes)
- TrueType font rendering
- Text color (RGB) selection
- Vertical text positioning (top, center, bottom)
- Horisontal text positioning (left, center, right)
- Font selection and number of pts
- Snapshots in png
- Live viewer or console mode
Download (0.015MB)
Added: 2007-02-21 License: GPL (GNU General Public License) Price:
990 downloads
Font::TTF::Scripts::AP 0.7
Font::TTF::Scripts::AP is a memory representation of a TTFBuilder Attachment Point database (APDB). more>>
Font::TTF::Scripts::AP is a memory representation of a TTFBuilder Attachment Point database (APDB).
SYNOPSIS
use Font::TTF::Scripts::AP;
$ap = Font::TTF::Scripts::AP->read_font($ttf_file, $ap_file, %opts);
$ap->make_classes();
INSTANCE VARIABLES
cmap
Reference to the Microsoft cmap within the font.
font
Reference to a font structure. read_font will cause at least the post, cmap, loca, and name tables to be read in.
glyphs
An array of references to glyph data structures, indexed by glyphID. Stucture elements are:
uni
Unicode scalar value, if any, as specified in the APDB. (decimal integer)
gnum
Actual glyph ID from font.
post
Actual Postscript name from font.
Note: The uni, gnum and post values are based on the UID, GID, and PSName fields of the APDB. If there are descrepancies between the APDB and the fonts internal tables, then for calcuating the above three values, priority is given first to UID field, then PSName field, and finally GID.
glyph
Reference to glyph structure read from font.
line
Line number in APDB where glyph is defined.
points
A hash of references to attachment point structures for this glyph, keyed by attachment point type (aka name). Each AP structure contains
name
The name (type in TTFBuilder terminology) of the attachment point
x, y
X and Y coordinates for the attachment point
line
Line number in APDB where this point is defined.
components
Present if the glyph is a composite. Is a reference to an array of component structures. Each component structure includes:
bbox
comma separated list of bounding box coordinates, i.e., x1, y1, x2, y2
uni
Unicode scalar value, if any, of the component. (decimal integer)
Note: The following instance variables contain the actual text read from the APDB. If there are descrepancies between the APDB and the font, these values may differ from corresponding values given above. Therefore these values should not be used except for diagnostic purposes.
UID
Unicode scalar value, if any, as specified in the APDB. (string of hex digits)
PSName
Postscript name, if any, as specified in the APDB
GID
Glyph id, if any, as specified in the APDB
classes
Created by "make_classes", this is a hash keyed by class name returning an array of GIDs for glyphs that are in the class. Classes are identified by extensions (part after a .) on the post name of each glyph. For each such extension, two classes are defined. The first is the class of all glyphs that have that extension (class name is the extension). The second is the class of nominal glyphs corresponding to the glyphs with that extension (class name is the extension but with the prefix no_).
lists
Created by "make_classes", this is a hash keyed by attachment point name (as modified by "make_point") returning an array of GIDs for glyphs that have the given attachment point.
vecs
If defined, this variable will be updated by "make_classes". It is a hash, keyed by attachment point name (as modified by "make_point") returning a bit vec bit array, indexed by GID, each bit set to 1 if the corresponding glyph has the given attachment point.
ligclasses
Optionally created by make_classes if ligatures are requested and they exist. The base forms class is no_code while the ligatures are held in code.
<<lessSYNOPSIS
use Font::TTF::Scripts::AP;
$ap = Font::TTF::Scripts::AP->read_font($ttf_file, $ap_file, %opts);
$ap->make_classes();
INSTANCE VARIABLES
cmap
Reference to the Microsoft cmap within the font.
font
Reference to a font structure. read_font will cause at least the post, cmap, loca, and name tables to be read in.
glyphs
An array of references to glyph data structures, indexed by glyphID. Stucture elements are:
uni
Unicode scalar value, if any, as specified in the APDB. (decimal integer)
gnum
Actual glyph ID from font.
post
Actual Postscript name from font.
Note: The uni, gnum and post values are based on the UID, GID, and PSName fields of the APDB. If there are descrepancies between the APDB and the fonts internal tables, then for calcuating the above three values, priority is given first to UID field, then PSName field, and finally GID.
glyph
Reference to glyph structure read from font.
line
Line number in APDB where glyph is defined.
points
A hash of references to attachment point structures for this glyph, keyed by attachment point type (aka name). Each AP structure contains
name
The name (type in TTFBuilder terminology) of the attachment point
x, y
X and Y coordinates for the attachment point
line
Line number in APDB where this point is defined.
components
Present if the glyph is a composite. Is a reference to an array of component structures. Each component structure includes:
bbox
comma separated list of bounding box coordinates, i.e., x1, y1, x2, y2
uni
Unicode scalar value, if any, of the component. (decimal integer)
Note: The following instance variables contain the actual text read from the APDB. If there are descrepancies between the APDB and the font, these values may differ from corresponding values given above. Therefore these values should not be used except for diagnostic purposes.
UID
Unicode scalar value, if any, as specified in the APDB. (string of hex digits)
PSName
Postscript name, if any, as specified in the APDB
GID
Glyph id, if any, as specified in the APDB
classes
Created by "make_classes", this is a hash keyed by class name returning an array of GIDs for glyphs that are in the class. Classes are identified by extensions (part after a .) on the post name of each glyph. For each such extension, two classes are defined. The first is the class of all glyphs that have that extension (class name is the extension). The second is the class of nominal glyphs corresponding to the glyphs with that extension (class name is the extension but with the prefix no_).
lists
Created by "make_classes", this is a hash keyed by attachment point name (as modified by "make_point") returning an array of GIDs for glyphs that have the given attachment point.
vecs
If defined, this variable will be updated by "make_classes". It is a hash, keyed by attachment point name (as modified by "make_point") returning a bit vec bit array, indexed by GID, each bit set to 1 if the corresponding glyph has the given attachment point.
ligclasses
Optionally created by make_classes if ligatures are requested and they exist. The base forms class is no_code while the ligatures are held in code.
Download (0.10MB)
Added: 2006-10-19 License: Perl Artistic License Price:
1110 downloads
Font::Scripts::AP 0.5
Font::Scripts::AP is a Perl module for memory representation of a TTFBuilder Attachment Point database (APDB). more>>
Font::Scripts::AP is a Perl module for memory representation of a TTFBuilder Attachment Point database (APDB).
SYNOPSIS
use Font::Scripts::AP;
$ap = Font::Scripts::AP->read_font($ttf_file, $ap_file, %opts);
$ap->make_classes();
INSTANCE VARIABLES
cmap
Reference to the Microsoft cmap within the font.
font
Reference to a font structure. read_font will cause at least the post, cmap, loca, and name tables to be read in.
glyphs
An array of references to glyph data structures, indexed by glyphID. Stucture elements are:
uni
Unicode scalar value, if any, as specified in the APDB. (decimal integer)
gnum
Actual glyph ID from font.
post
Actual Postscript name from font.
Note: The uni, gnum and post values are based on the UID, GID, and PSName fields of the APDB. If there are descrepancies between the APDB and the fonts internal tables, then for calcuating the above three values, priority is given first to UID field, then PSName field, and finally GID.
glyph
Reference to glyph structure read from font.
line
Line number in APDB where glyph is defined.
points
A hash of references to attachment point structures for this glyph, keyed by attachment point type (aka name). Each AP structure contains
name
The name (type in TTFBuilder terminology) of the attachment point
x, y
X and Y coordinates for the attachment point
line
Line number in APDB where this point is defined.
components
Present if the glyph is a composite. Is a reference to an array of component structures. Each component structure includes:
bbox
comma separated list of bounding box coordinates, i.e., x1, y1, x2, y2
uni
Unicode scalar value, if any, of the component. (decimal integer)
Note: The following instance variables contain the actual text read from the APDB. If there are descrepancies between the APDB and the font, these values may differ from corresponding values given above. Therefore these values should not be used except for diagnostic purposes.
UID
Unicode scalar value, if any, as specified in the APDB. (string of hex digits)
PSName
Postscript name, if any, as specified in the APDB
GID
Glyph id, if any, as specified in the APDB
classes
Created by "make_classes", this is a hash keyed by class name returning an array of GIDs for glyphs that are in the class. Classes are identified by extensions (part after a .) on the post name of each glyph. For each such extension, two classes are defined. The first is the class of all glyphs that have that extension (class name is the extension). The second is the class of nominal glyphs corresponding to the glyphs with that extension (class name is the extension but with the prefix no_).
lists
Created by "make_classes", this is a hash keyed by attachment point name (as modified by "make_point") returning an array of GIDs for glyphs that have the given attachment point.
vecs
If defined, this variable will be updated by "make_classes". It is a hash, keyed by attachment point name (as modified by "make_point") returning a bit vec bit array, indexed by GID, each bit set to 1 if the corresponding glyph has the given attachment point.
ligclasses
Optionally created by make_classes if ligatures are requested and they exist. The base forms class is no_code while the ligatures are held in code.
WARNINGS
If -errorfh not set, this accumulates any warning or error messages encountered.
WARNINGS
Count of number fo warnings or errors encountered.
<<lessSYNOPSIS
use Font::Scripts::AP;
$ap = Font::Scripts::AP->read_font($ttf_file, $ap_file, %opts);
$ap->make_classes();
INSTANCE VARIABLES
cmap
Reference to the Microsoft cmap within the font.
font
Reference to a font structure. read_font will cause at least the post, cmap, loca, and name tables to be read in.
glyphs
An array of references to glyph data structures, indexed by glyphID. Stucture elements are:
uni
Unicode scalar value, if any, as specified in the APDB. (decimal integer)
gnum
Actual glyph ID from font.
post
Actual Postscript name from font.
Note: The uni, gnum and post values are based on the UID, GID, and PSName fields of the APDB. If there are descrepancies between the APDB and the fonts internal tables, then for calcuating the above three values, priority is given first to UID field, then PSName field, and finally GID.
glyph
Reference to glyph structure read from font.
line
Line number in APDB where glyph is defined.
points
A hash of references to attachment point structures for this glyph, keyed by attachment point type (aka name). Each AP structure contains
name
The name (type in TTFBuilder terminology) of the attachment point
x, y
X and Y coordinates for the attachment point
line
Line number in APDB where this point is defined.
components
Present if the glyph is a composite. Is a reference to an array of component structures. Each component structure includes:
bbox
comma separated list of bounding box coordinates, i.e., x1, y1, x2, y2
uni
Unicode scalar value, if any, of the component. (decimal integer)
Note: The following instance variables contain the actual text read from the APDB. If there are descrepancies between the APDB and the font, these values may differ from corresponding values given above. Therefore these values should not be used except for diagnostic purposes.
UID
Unicode scalar value, if any, as specified in the APDB. (string of hex digits)
PSName
Postscript name, if any, as specified in the APDB
GID
Glyph id, if any, as specified in the APDB
classes
Created by "make_classes", this is a hash keyed by class name returning an array of GIDs for glyphs that are in the class. Classes are identified by extensions (part after a .) on the post name of each glyph. For each such extension, two classes are defined. The first is the class of all glyphs that have that extension (class name is the extension). The second is the class of nominal glyphs corresponding to the glyphs with that extension (class name is the extension but with the prefix no_).
lists
Created by "make_classes", this is a hash keyed by attachment point name (as modified by "make_point") returning an array of GIDs for glyphs that have the given attachment point.
vecs
If defined, this variable will be updated by "make_classes". It is a hash, keyed by attachment point name (as modified by "make_point") returning a bit vec bit array, indexed by GID, each bit set to 1 if the corresponding glyph has the given attachment point.
ligclasses
Optionally created by make_classes if ligatures are requested and they exist. The base forms class is no_code while the ligatures are held in code.
WARNINGS
If -errorfh not set, this accumulates any warning or error messages encountered.
WARNINGS
Count of number fo warnings or errors encountered.
Download (0.10MB)
Added: 2006-10-03 License: Perl Artistic License Price:
1117 downloads
Gnome Font Sampler 0.4
Gnome Font Sampler lets you browse your installed fonts using whatever color. more>>
Gnome Font Sampler lets you browse your installed fonts using whatever color, size, attributes (Bold/Italics/Underline), and example text you like.
Main features:
- Quickly compare your fonts
- Select font size, text color, background color, bold, italics, underline, and example text used
- Preview fonts before adding them to the list
- Pretty good keyboard control
- It costs $0 and is Free software
Enhancements:
- New application icon.
- Improved keyboard control (navigate font lists and choose fonts using just the keyboard).
<<lessMain features:
- Quickly compare your fonts
- Select font size, text color, background color, bold, italics, underline, and example text used
- Preview fonts before adding them to the list
- Pretty good keyboard control
- It costs $0 and is Free software
Enhancements:
- New application icon.
- Improved keyboard control (navigate font lists and choose fonts using just the keyboard).
Download (0.30MB)
Added: 2005-08-05 License: GPL (GNU General Public License) Price:
1543 downloads
Font Mate 1.0
Font Mate is a simple program to help you see how fonts look on your computer, and to help you find symbol characters. more>>
Font Mate application helps you to see how fonts look on your computer, and it also helps you find symbol characters.
Using Font Mate
There isnt much to it: Font Mate shows you a list of all the fonts installed on your computer. Choose any font from the list and it will show you what all the characters in that font look like. Choose any one of those characters and you will see an enlarged version of it at the bottom of the page (with its ASCII code in decimal and hex, should you be interested). Click the button to copy that character to the clipboard if you want to use it in another application.
Works on...
We wrote Font Mate originally for Mac OS X, but we have included versions for Windows and Linux too. We wrote it using REALbasic, a great tool for cross-platform rapid development. Source is available on request.
How much?
Font Mate is freeware. Download, use, share as you wish. No warranty is offered, and we accept no liability for anything strange or nasty that it might do to your computer.
And another thing
If you like Font Mate, why not have a look at our main site at tellura.co.uk and check out our other products and services?
<<lessUsing Font Mate
There isnt much to it: Font Mate shows you a list of all the fonts installed on your computer. Choose any font from the list and it will show you what all the characters in that font look like. Choose any one of those characters and you will see an enlarged version of it at the bottom of the page (with its ASCII code in decimal and hex, should you be interested). Click the button to copy that character to the clipboard if you want to use it in another application.
Works on...
We wrote Font Mate originally for Mac OS X, but we have included versions for Windows and Linux too. We wrote it using REALbasic, a great tool for cross-platform rapid development. Source is available on request.
How much?
Font Mate is freeware. Download, use, share as you wish. No warranty is offered, and we accept no liability for anything strange or nasty that it might do to your computer.
And another thing
If you like Font Mate, why not have a look at our main site at tellura.co.uk and check out our other products and services?
Download (0.91MB)
Added: 2007-07-18 License: Freeware Price:
828 downloads
Barefoot GNU/Linux 5.0.3
Barefoot GNU/Linux is a linux distribution based on Vector Linux and Slackware. more>>
Barefoot GNU/Linux is a linux distribution based on Vector Linux and Slackware.
Main features:
- Aims to be a fast/light(as can be) GNU/Linux distribution; for the less "geeky" user.
- Support for tamil (tamil-gtk-im, scim, m17n, skim, kde-i18n, unicode and non-unicode fonts)
- Support for sinhala (sinhala-gtk-im, scim, unicode and non-unicode fonts)
- Based on Vector Linux & Slackware
Version restrictions:
- upon first boot X will crash - login as root & init 4; or reboot to reslove this
- lilo might have issues
- the documentation and installer are vectorlinuxs we need to hack these (installer is under heavy modification...)
<<lessMain features:
- Aims to be a fast/light(as can be) GNU/Linux distribution; for the less "geeky" user.
- Support for tamil (tamil-gtk-im, scim, m17n, skim, kde-i18n, unicode and non-unicode fonts)
- Support for sinhala (sinhala-gtk-im, scim, unicode and non-unicode fonts)
- Based on Vector Linux & Slackware
Version restrictions:
- upon first boot X will crash - login as root & init 4; or reboot to reslove this
- lilo might have issues
- the documentation and installer are vectorlinuxs we need to hack these (installer is under heavy modification...)
Download (701MB)
Added: 2006-01-09 License: GPL (GNU General Public License) Price:
783 downloads
wxFontView 0.4
wxFontView is a font viewing/image creation/installer. more>>
wxFontView is a font viewing/image creation/installer. Uses wxPython to display system fonts and allows user to change font size, color, background color, font face and the diplayed text.
Handy to view fonts and styles quickly, or use to make "logo" graphics. Also can be used to install/uninstall fonts on a per-user basis. (Does not touch system fonts.)
<<lessHandy to view fonts and styles quickly, or use to make "logo" graphics. Also can be used to install/uninstall fonts on a per-user basis. (Does not touch system fonts.)
Download (3.3MB)
Added: 2005-10-25 License: GPL (GNU General Public License) Price:
1459 downloads
enscript 1.6.1
GNU enscript converts ASCII files to PostScript and stores generated output to a file or sends it directly to the printer. more>>
GNU enscript converts ASCII files to PostScript and stores generated output to a file or sends it directly to the printer. GNU enscript includes features for "pretty-printing" (language sensitive code highlighting) in several programming languages.
It supports ten different input encodings, Adobe Font Metrics files, and user defined fancy headers. AFM files for the most common PostScript fonts are included in the distribution; the program itself can download PostScript fonts.
Other features include language sensitive highlighting, N-up printing, inlined EPS images, comments, and the ability to change body color and font on the fly.
Supported Character Sets
Enscript supports following character sets:
- ISO-8859-1 ISO Latin1 (default)
- ISO-8859-2 ISO Latin2
- ISO-8859-3 ISO Latin3
- ISO-8859-4 ISO Latin4
- ISO-8859-5 ISO Cyrillic
- ISO-8859-7 ISO Greek
- ascii 7 bit ascii
- ascii fi se 7 bit ascii with following encodings:
{ = �(adieresis)
| = �(odieresis)
} = �(aring)
[ = �(Adieresis)
= �(Odieresis)
] = �(Aring)
- ascii dk no 7 bit ascii with following encodings:
{ = �(ae)
| = (oslash)
} = �(aring)
[ = �(AE)
= �(Oslash)
] = �(Aring)
- IBM/PC standard PC/DOS character set
- Mac Macintosh character set
- VMS VMS multinational charset
- hp8 HP Roman-8 charset
- koi8 Adobe Standard Cyrillic Font KOI8 charset
- ps PostScript fonts default encoding
- pslatin1 PostScript interpreters `ISOLatin1Encoding
<<lessIt supports ten different input encodings, Adobe Font Metrics files, and user defined fancy headers. AFM files for the most common PostScript fonts are included in the distribution; the program itself can download PostScript fonts.
Other features include language sensitive highlighting, N-up printing, inlined EPS images, comments, and the ability to change body color and font on the fly.
Supported Character Sets
Enscript supports following character sets:
- ISO-8859-1 ISO Latin1 (default)
- ISO-8859-2 ISO Latin2
- ISO-8859-3 ISO Latin3
- ISO-8859-4 ISO Latin4
- ISO-8859-5 ISO Cyrillic
- ISO-8859-7 ISO Greek
- ascii 7 bit ascii
- ascii fi se 7 bit ascii with following encodings:
{ = �(adieresis)
| = �(odieresis)
} = �(aring)
[ = �(Adieresis)
= �(Odieresis)
] = �(Aring)
- ascii dk no 7 bit ascii with following encodings:
{ = �(ae)
| = (oslash)
} = �(aring)
[ = �(AE)
= �(Oslash)
] = �(Aring)
- IBM/PC standard PC/DOS character set
- Mac Macintosh character set
- VMS VMS multinational charset
- hp8 HP Roman-8 charset
- koi8 Adobe Standard Cyrillic Font KOI8 charset
- ps PostScript fonts default encoding
- pslatin1 PostScript interpreters `ISOLatin1Encoding
Download (0.63MB)
Added: 2006-06-08 License: GPL (GNU General Public License) Price:
1236 downloads
Fontlinge 2.0.1
Fontlinge is a font management and organisation for TrueType & PostScript. more>>
Fontlinge project is a font management and organisation for TrueType & PostScript.
Fontlinge searches for font files, sorts them into folders by name and look and with human readable names, stores gathered font information in a database, generates previews and posters, finds and removes duplicates, and reunites PostScript font families.
Also, Fontlinge has a Web interface to browse through your fonts. It shows detail previews and font info, provides font download as a tarball, and has the possibility to sort fonts.
Main features:
- find your fonts
- rename files, i.e. from AGARBI.TTF to Adobe_Garamond_Bold_Italic.ttf
- create a folder-structure
- move the files to the right place
- find and removes duplicate files
- reunion postscript fontfiles
- create previews
<<lessFontlinge searches for font files, sorts them into folders by name and look and with human readable names, stores gathered font information in a database, generates previews and posters, finds and removes duplicates, and reunites PostScript font families.
Also, Fontlinge has a Web interface to browse through your fonts. It shows detail previews and font info, provides font download as a tarball, and has the possibility to sort fonts.
Main features:
- find your fonts
- rename files, i.e. from AGARBI.TTF to Adobe_Garamond_Bold_Italic.ttf
- create a folder-structure
- move the files to the right place
- find and removes duplicate files
- reunion postscript fontfiles
- create previews
Download (0.23MB)
Added: 2006-09-25 License: GPL (GNU General Public License) Price:
1126 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above type1 urw fonts with cyrillics 1.0.7pre43 search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
