Free turn watcher 1.2 software for linux

Log Watcher is a tool for log watching and colorize.
Installation:
The `configure shell script attempts to guess correct values for various system-dependent variables used during compilation.
It uses those values to create a `Makefile in each directory of the package. It may also create one or more `.h files containing system-dependent definitions.
Finally, it creates a shell script `config.status that you can run in the future to recreate the current configuration, a file `config.cache that saves the results of its tests to speed up
reconfiguring, and a file `config.log containing compiler output (useful mainly for debugging `configure).
If you need to do unusual things to compile the package, please try to figure out how `configure could check whether to do them, and mail diffs or instructions to the address given in the `README so they can be considered for the next release.
If at some point `config.cache contains results you dont want to keep, you may remove or edit it.
The file `configure.in is used to create `configure by a program called `autoconf. You only need `configure.in if you want to change it or regenerate `configure using a newer version of `autoconf.
The simplest way to compile this package is:
1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system.
If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute `configure itself.
Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.
2. Type `make to compile the package.
3. Optionally, type `make check to run any self-tests that come with the package.
4. Type `make install to install the programs and any data files and documentation.
5. You can remove the program binaries and object files from the source code directory by typing `make clean. To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean.
There is also a `make maintainer-clean target, but that is intended mainly for the packages developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
Enhancements:
- manual typos
- change defaults in config file
- minor changes needed to build on OpenBSD
- fixed lwatch crashes for some spurious configuration

Stormbaan Coureur is a simulated obstacle course for automobiles. n this game, your objective is to drive your car along an obstacle course. Success depends on total control of the car, and making use of the laws of physics.
Enhancements:
- New name
- Extended track with half pipe jump
- Extended track with turn tables
- Fixed joystick accelerator axis assigment
- Softened the suspension
- Added brake-light
- Added reverse-gear-light
- Improved leaderboard
- Added respawn points

mswatch project is a command line unix program that keeps two mailboxes synchronized more efficiently and with shorter delays than periodically synchronizing the two mailboxes.
mswatch watches mailboxes to know when to initiate mailbox syncs. Using mswatch, your mail synchronization program can be called on demand instead of through polling, resulting in prompter mail delivery and lower bandwidth usage and server load.
mswatch is designed to work in conjunction with mailbox synchronization programs, currently supports watching Linux (2.4+) hosted Maildirs (including Maildir folders, Maildir++), and is licensed under the GNU GPL. Future support for additional mailbox formats, especially for mbox, is planned.
Why mswatch
Keeping a set of mailboxes on multiple computers means keeping the copies synchronized (eg on ones desktop and laptop or on a personal computer that can not be reached while on the road an always-reachable server). While the IMAP protocol is designed to support this and is widely used, IMAP clients can only detect mailbox changes by querying the server.
Thus clients generally either sync when the user requests or sync periodically. However, because each mailbox sync uses server and network resources and because users often have a number of mailboxes, many of which receive mail infrequently, one must compromise between prompt message delivery and low server and network resource usage. Typical practice is to sync only when the user requests or to sync periodically with 5-10 minute frequencies. Nonetheless, it is often helpful for users to see new mail fairly soon after its arrival (eg notifications, group meeting changes, or active conversation threads).
mswatch addresses this speed of delivery vs resource usage tradeoff using interrupt-based instead of polling behavior to detect mailbox changes. mswatch asks each of the two mailstores to send mailbox change notifications; when mswatch receives a notification it in turn invokes the users mailbox synchronization program for the changed mailbox. Thus, idle mailboxes do not use active resources and prompt mailbox synchronization is efficient.
Version restrictions:
- Because mswatch abstracts mail changes and synchronization to the mailbox (instead of message) level and because mail watcher communication is one-way, extra mailbox syncs occur. While it would be great to avoid this extra work, it is in the noise compared to the number of empty syncs that polling accumulates.
For example, the case of new mail delivered to the mail servers INBOX:
(1) mswatch detects the changed server INBOX
(2) mswatch invokes the mail syncer for INBOX, which adds the mail to the local INBOX
(3) mswatch detects the changed local INBOX
(4) mswatch invokes the mail syncer for INBOX, which detects no changes
Thus two syncs occur in this case instead of the single necessary sync.
Enhancements:
- Per-mailbox inter-sync delays were added to rarely sync high volume mailboxes and quickly sync important mailboxes.
- Inter-sync delays are allowed to be greater than the maximum error delay.
- mswatch now prints the names of pending mailboxes upon receiving SIGUSR1.

Google Reader Watcher is a Firefox extension that will check your Google Reader for unread feeds and if you have, the plugin will display them on your browsers statusbar.

printerpowerd project is a Daemon to automatically turn a printer on and off.

printerpowerd is a little Python script designed for users of older printers who want to save power when not using their printer, without manually turning it on and off.

It runs, checking the printer queue directory every five seconds, turns it on when it sees a job, and turns it off after a configurable amount of idle time.

It allows you to turn a printer on and off (when idle) using X10 or any other abitrary command.

Gtk2::Helper is a Perl module for convenience functions for the Gtk2 module.

SYNOPSIS

use Gtk2::Helper;

# Handle I/O watchers easily, like Gtk 1.x did
$tag = Gtk2::Helper->add_watch ( $fd, $cond, $callback, $data )
$rc = Gtk2::Helper->remove_watch ( $tag )

ABSTRACT

This module collects Gtk2 helper functions, which should make implementing some common tasks easier.

Gtk2::Helper->add_watch ( ... )

$tag = Gtk2::Helper->add_watch ( $fd, $cond, $callback, $data )

This method is a wrapper for Glib::IO->add_watch. The callback is called every time when its safe to read from or write to the watched filehandle.

$fd

Unix file descriptor to be watched. If you use the FileHandle module you get this value from the FileHandle->fileno() method.

$cond

May be either in or out, depending if you want to read from the filehandle (in) or write to it (out).

$callback

A subroutine reference or closure, which is called, if you can safely operate on the filehandle, without the risk of blocking your application, because the filehandle is not ready for reading resp. writing.

But aware: you should not use Perls builtin read and write functions here because these operate always with buffered I/O. Use low level sysread() and syswrite() instead. Otherwise Perl may read more data into its internal buffer as your callback actually consumes. But Glib wont call the callback on data which is already in Perls buffer, only when events on the the underlying Unix file descriptor occur.

The callback subroutine should return always true. Two signal watchers are connected internally (the I/O watcher, and a HUP watcher, which is called on eof() or other exceptions). Returning false from a watcher callback, removes the correspondent watcher automatically. Because we have two watchers internally, only one of them is removed, but probably not both. So always return true and use Gtk2::Helper->remove_watch to disable a watcher, which was installed with Gtk2::Helper->add_watch.

(Gtk2::Helper could circumvent this by wrapping your callback with a closure returning always true. But why adding another level of indirection if writing a simple "1;" at the end of your callback solves this problem? ;)

$data

This data is passed to the callback.

$tag

The method returns a tag which represents the created watcher. Later you need to pass this tag to Gtk2::Helper->remove_watch to remove the watcher.

Bandwidth Check is a small utility that helps an administrator measure the available bandwidth. In order to make use of this utility, you will need to turn on the chargen service, which is provided in many inetd implementations.

In order to make use of this utility, you will need to turn on chargen protocol.

To enable chargen on Linux:

create the following file /etc/xinetd.d/charge
service chargen
{
type = INTERNAL
id = chargen-stream
socket_type = stream
protocol = tcp
user = root
wait = no
disable = no
}
service xinetd restart

To Compile bwcheck

gcc -o bwcheck bwcheck.c

To execute

./bwcheck

./bwcheck 172.16.11.2
Throughput: 73390.74 kb