Free transcription services software for linux

Thunderbird Service Menu is a service menu that will allow you to right click on a file and attach it to a new E-mail from Thunderbird.

Just extract the "AttachToThunderbirdMail" config file to "/usr/share/apps/konqueror/servicemenus" and it should work.

encFS service menu one little KDE service menu for encFS directory.

Installation:

ungzip and copy in ~/.kde/share/apps/konqueror/servicemenus

Usage:

Click on encFS directory and click on mount.

For unmounting, click on origin directory and click on umount, this unmount and remove destination directory.

READ THIS PLEASE:

This script create a directory in your home with name encFS_$DIR. For to mount correctly, this directory must not exist.

Configuration with no services supported script is for a single host firewall configuration with no services supported by the firewall machine itself.

Sample:

# USER CONFIGURABLE SECTION

# The name and location of the ipchains utility.
IPTABLES=iptables

# The path to the ipchains executable.
PATH="/usr/local/sbin"

# Our internal network address space and its supporting network device.
OURNET="10.5.0.0/24"
OURBCAST="10.5.0.255"
OURDEV="eth0"

# The outside address and the network device that supports it.
ANYADDR="0/0"
ANYDEV="ppp0"

# The TCP services we wish to allow to pass - "" empty means all ports
# note: comma separated
TCPIN="ssh,ftp,ftp-data"
TCPOUT="smtp,www,ssh,telnet,ftp,ftp-data,irc,http"

# The UDP services we wish to allow to pass - "" empty means all ports
# note: comma separated
UDPIN="domain"
UDPOUT="domain"

# The ICMP services we wish to allow to pass - "" empty means all types
# ref: /usr/include/netinet/ip_icmp.h for type numbers
# note: comma separated
ICMPIN="0,3,11"
ICMPOUT="8,3,11"

# Logging; uncomment the following line to enable logging of datagrams
# that are blocked by the firewall.
# LOGGING=1

# END USER CONFIGURABLE SECTION
####################################
# Flush the Input table rules
echo -n Flushing forward... && {
$IPTABLES -F FORWARD
} && echo done

# We want to deny incoming access by default.
# echo -n Denying incoming access... && {
# $IPTABLES -P FORWARD drop
# } && echo done

# Drop all datagrams destined for this host received from outside.
echo -n Dropping incoming datagrams... && {
$IPTABLES -A INPUT -i $ANYDEV -j DROP
} && echo done

# SPOOFING
# We should not accept any datagrams with a source address matching ours
# from the outside, so we deny them.
echo -n Preventing spoofing... && {
$IPTABLES -A FORWARD -s $OURNET -i $ANYDEV -j DROP
} && echo done

# SMURF
# Disallow ICMP to our broadcast address to prevent "Smurf" style attack.
echo -n Preventing SMURFs... && {
$IPTABLES -A FORWARD -p icmp -i $ANYDEV -d $OURNET -j DROP
} && echo done

# We should accept fragments, in iptables we must do this explicitly.
echo -n Accepting fragments... && {
$IPTABLES -A FORWARD -f -j ACCEPT
} && echo done

# TCP
# We will accept all TCP datagrams belonging to an existing connection
# (i.e. having the ACK bit set) for the TCP ports were allowing through.
# This should catch more than 95 % of all valid TCP packets.
echo -n Accepting valid incoming tcp datagrams on existing connections... && {
$IPTABLES -A FORWARD -m multiport -p tcp -d $OURNET --dports $TCPIN ! --tcp-flags SYN,ACK ACK -j ACCEPT
} && echo done
echo -n Accepting valid outgoing tcp datagrams on existing connections... && {
$IPTABLES -A FORWARD -m multiport -p tcp -s $OURNET --sports $TCPIN ! --tcp-flags SYN,ACK ACK -j ACCEPT
} && echo done

# TCP - INCOMING CONNECTIONS
# We will accept connection requests from the outside only on the
# allowed TCP ports.
echo -n Accepting incoming tcp connections on allowed ports... && {
$IPTABLES -A FORWARD -m multiport -p tcp -i $ANYDEV -d $OURNET --dports $TCPIN --syn -j ACCEPT
} && echo done

# TCP - OUTGOING CONNECTIONS
# We will accept all outgoing tcp connection requests on the allowed TCP ports.
echo -n Accepting outgoing traffic on allowed tcp ports... && {
$IPTABLES -A FORWARD -m multiport -p tcp -i $OURDEV -d $ANYADDR --dports $TCPOUT --syn -j ACCEPT
} && echo done

# UDP - INCOMING
# allow UDP datagrams in on the allowed ports and back.
echo -n Allowing UDP datagrams in on the allowed ports and back... && {
$IPTABLES -A FORWARD -m multiport -p udp -i $ANYDEV -d $OURNET --dports $UDPIN -j ACCEPT
$IPTABLES -A FORWARD -m multiport -p udp -i $ANYDEV -s $OURNET --sports $UDPIN -j ACCEPT
} && echo done

# UDP - OUTGOING
# We will allow UDP datagrams out to the allowed ports and back.
echo -n Allowing UDP datagrams out on the allowed ports and back... && {
$IPTABLES -A FORWARD -m multiport -p udp -i $OURDEV -d $ANYADDR --dports $UDPOUT -j ACCEPT
$IPTABLES -A FORWARD -m multiport -p udp -i $OURDEV -s $ANYADDR --sports $UDPOUT -j ACCEPT
} && echo done

# ICMP - INCOMING
# We will allow ICMP datagrams in of the allowed types.
# echo -n Allowing ICMP datagrams in of the allowed types... && {
# $IPTABLES -A FORWARD -p icmp -i $ANYDEV -d $OURNET --icmp-type $ICMPIN -j ACCEPT
# } && echo done

# ICMP - OUTGOING
# We will allow ICMP datagrams out of the allowed types.
# echo -n Allowing ICMP datagrams out of the allowed types... && {
# $IPTABLES -A FORWARD -p icmp -i $OURDEV -d $ANYADDR --icmp-type $ICMPOUT -j ACCEPT
# } && echo done

# DEFAULT and LOGGING
# All remaining datagrams fall through to the default
# rule and are dropped. They will be logged if youve
# configured the LOGGING variable above.
#

# DoS
# enabling Syn-flood protection
echo -n Enabling Syn-flood protection... && {
iptables -A FORWARD -p tcp --syn -m limit --limit 1/s -j ACCEPT
} && echo done
# Enabling Furtive port scanner protection
echo -n Enabling Furtive port scanner protection... && {
iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST RST -m limit --limit 1/s -j ACCEPT
} && echo done
# Enabling ping of death protection
echo -n Enabling ping of death protection... && {
iptables -A FORWARD -p icmp --icmp-type echo-request -m limit --limit 1/s -j ACCEPT
} && echo done


if [ "$LOGGING" ]
then
# Log barred TCP
$IPTABLES -A FORWARD -m tcp -p tcp -j LOG
# Log barred UDP
$IPTABLES -A FORWARD -m udp -p udp -j LOG
# Log barred ICMP
$IPTABLES -A FORWARD -m udp -p icmp -j LOG
fi
#
# end.

Open Project Services (OPS) is a project collaboration platform, integrating server components such as e-mail, calendaring, timesheets, documents, knowledge, etc. with standards complient clients. Open Project Services consists of a project server and a set of client extensions.
We are building a project collaboration platform. It consists of a project server that integrates with services needed within a project, e.g. e-mail, calendaring, timesheets, documents, knowledge, etc.
The project server is a Webservices hub based on Java (J2EE). The persistence layer for project information is LDAP. We use OpenLDAP now, but others should also be possible. The e-mail backend makes use of a standard IMAP server. Our reference implementation uses Courier.
We are building extensions/plugins for clients, making them OPS-enabled. We support e.g. Mozilla Thunderbird (XUL) and Squirrelmail (PHP) for e-mail clients. For the calendaring and timesheet components we have a Mozilla Sunbird extension (XUL).
In short: we are building a project collaboration environment on an OSS stack, enriching services with project information, using COTS clients/servers and open standards.
Enhancements:
- This release includes some changes to the underlying LDAP schema to make it possible to disable tasks when they are completed.
- To make use of this new feature, the Web services and the sunbird timesheet client have to be updated.

Yahoo::Marketing::Service is a base class for Service modules.

SYNOPSIS

This module is a base class for various Service modules (CampaignService, AdGroupService) to inherit from. It should not be used directly.

There are some methods common to all Services that are documented below.

See also perldoc Yahoo::Marketing::AccountService ...::AdGroupService ...::AdService ...::BasicReportService ...::BidInformationService ...::BudgetingService ...::CampaignService ...::ExcludedWordsService ...::ForecastService ...::KeywordResearchService ...::KeywordService ...::LocationService ...::MasterAccountService ...::UserManagementService

Please see the API docs at
http://ysm.techportal.searchmarketing.yahoo.com/docs/gsg/index.asp#services
for details about what methods are available from each of the Services.