Free topsites script software for linux

News Script allows you to write articles for your website. News Script features a WYSIWYG editor which makes writing an article easy and it supports search engine friendly URLs.
Main features:
- Write, edit and delete text articles
- Use the built-in WYSIWYG editor for formatting
- Create search engine friendly URLs
- List and search in existing articles
- Completely template driven
- Installation routine
How the script works
As the admin you can write new articles and list, edit, delete and search in existing ones.
News script features a WYSIWYG editor that gives you full control over the format of an article. JavaScript is required, though. The script allows you to choose an article date and the date when the article is to be published.
The title of an article appears as part of the URL which is good for search engine optimization. In case your server supports mod_rewrite the article URL looks like a normal URL of an HTML page.
On the front end the visitor will be provided with a list of published articles. As admin you can set the number of articles per page which results in several result pages which can be browsed by the visitor.

UTIN Firewall script project is a script for Linux 2.4.x and iptables.

###########
# Configuration options, these will speed you up getting this script to
# work with your own setup.

#
# your LANs IP range and localhost IP. /24 means to only use the first 24
# bits of the 32 bit IP adress. the same as netmask 255.255.255.0
#
# INET_IP is used by me to allow myself to do anything to myself, might
# be a security risc but sometimes I want this. If you dont have a static
# IP, I suggest not using this option at all for now but its still
# enabled per default and will add some really nifty security bugs for all
# those who skips reading the documentation=)

LAN_IP="192.168.0.2"
LAN_BCAST_ADRESS="192.168.0.255"
LAN_IFACE="eth1"

LO_IFACE="lo"
LO_IP="127.0.0.1"

INET_IP="194.236.50.155"
INET_IFACE="eth0"

IPTABLES="/usr/local/sbin/iptables"

#########
# Load all required IPTables modules
#

#
# Needed to initially load modules
#
/sbin/depmod -a

#
# Adds some iptables targets like LOG, REJECT and MASQUARADE.
#
/sbin/modprobe ipt_LOG
#/sbin/modprobe ipt_REJECT
/sbin/modprobe ipt_MASQUERADE

#
# Support for owner matching
#
#/sbin/modprobe ipt_owner

#
# Support for connection tracking of FTP and IRC.
#
#/sbin/modprobe ip_conntrack_ftp
#/sbin/modprobe ip_conntrack_irc

#
# Enable ip_forward, this is critical since it is turned off as defaul in
# Linux.
#

echo "1" > /proc/sys/net/ipv4/ip_forward

#
# Dynamic IP users:
#
#echo "1" > /proc/sys/net/ipv4/ip_dynaddr

#
# Enable simple IP Forwarding and Network Address Translation
#

$IPTABLES -t nat -A POSTROUTING -o $INET_IFACE -j SNAT --to-source $INET_IP

#
# Set default policies for the INPUT, FORWARD and OUTPUT chains
#

$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT DROP
$IPTABLES -P FORWARD DROP

#
# bad_tcp_packets chain
#
# Take care of bad TCP packets that we dont want.
#

$IPTABLES -N bad_tcp_packets
$IPTABLES -A bad_tcp_packets -p tcp ! --syn -m state --state NEW -j LOG
--log-prefix "New not syn:"
$IPTABLES -A bad_tcp_packets -p tcp ! --syn -m state --state NEW -j DROP

#
# Do some checks for obviously spoofed IPs
#

$IPTABLES -A bad_tcp_packets -i $INET_IFACE -s 192.168.0.0/16 -j DROP
$IPTABLES -A bad_tcp_packets -i $INET_IFACE -s 10.0.0.0/8 -j DROP
$IPTABLES -A bad_tcp_packets -i $INET_IFACE -s 172.16.0.0/12 -j DROP
$IPTABLES -A bad_tcp_packets -i $LAN_IFACE ! -s 192.168.0.0/16 -j DROP

#
# Bad TCP packets we dont want
#

$IPTABLES -A FORWARD -p tcp -j bad_tcp_packets

#
# Accept the packets we actually want to forward between interfaces.
#

$IPTABLES -A FORWARD -p tcp --dport 21 -i $LAN_IFACE -j ACCEPT
$IPTABLES -A FORWARD -p tcp --dport 80 -i $LAN_IFACE -j ACCEPT
$IPTABLES -A FORWARD -p tcp --dport 110 -i $LAN_IFACE -j ACCEPT

$IPTABLES -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -m limit --limit 3/minute --limit-burst 3 -j LOG
--log-level DEBUG --log-prefix "IPT FORWARD packet died: "


#
# Create separate chains for ICMP, TCP and UDP to traverse
#

$IPTABLES -N icmp_packets
$IPTABLES -N tcp_packets
$IPTABLES -N udpincoming_packets

#
# The allowed chain for TCP connections
#

$IPTABLES -N allowed
$IPTABLES -A allowed -p TCP --syn -j ACCEPT
$IPTABLES -A allowed -p TCP -m state --state ESTABLISHED,RELATED
-j ACCEPT
$IPTABLES -A allowed -p TCP -j DROP

#
# ICMP rules
#

# Changed rules totally
$IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 8 -j ACCEPT
$IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 11 -j ACCEPT

#
# TCP rules
#

$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 21 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 22 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 80 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 113 -j allowed

#
# UDP ports
#

$IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 53 -j ACCEPT
$IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 123 -j ACCEPT
$IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 2074 -j ACCEPT
$IPTABLES -A udpincoming_packets -p UDP -s 0/0 --source-port 4000 -j ACCEPT

#
# INPUT chain
#
# Bad TCP packets we dont want
#

$IPTABLES -A INPUT -p tcp -j bad_tcp_packets

#
# Rules for incoming packets from anywhere
#

$IPTABLES -A INPUT -p ICMP -j icmp_packets
$IPTABLES -A INPUT -p TCP -j tcp_packets
$IPTABLES -A INPUT -p UDP -j udpincoming_packets

#
# Rules for special networks not part of the Internet
#

$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $LO_IP -j ACCEPT
$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $LAN_IP -j ACCEPT
$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $INET_IP -j ACCEPT
$IPTABLES -A INPUT -p ALL -d $INET_IP -m state --state ESTABLISHED,RELATED
-j ACCEPT
$IPTABLES -A INPUT -m limit --limit 3/minute --limit-burst 3
-j LOG --log-level DEBUG --log-prefix "IPT INPUT packet died: "

#
# OUTPUT chain
#
#
# Bad TCP packets we dont want
#

$IPTABLES -A OUTPUT -p tcp -j bad_tcp_packets


$IPTABLES -A OUTPUT -p ALL -s $LO_IP -j ACCEPT
$IPTABLES -A OUTPUT -p ALL -s $LAN_IP -j ACCEPT
$IPTABLES -A OUTPUT -p ALL -s $INET_IP -j ACCEPT
$IPTABLES -A OUTPUT -m limit --limit 3/minute --limit-burst 3
-j LOG --log-level DEBUG --log-prefix "IPT OUTPUT packet died: "

importOpmlAsPodcast script imports OPML lists with urls to podcasts, which are exported by many podcast portals and podcatchers, easily into amaroK (Vers. 1.3.3 up).

The script first opens a "file open dialog" with which you can choose a OPML (XML) file locally from your computer or from a remote location.

The script parses the file and looks for RSS-feeds. There has to be a parameter called xmlUrl in a tag called outline for the script to be able to do that.

DHCP IP Firewall script project is a script for Linux 2.4.x and iptables.

Sample:

1. Configuration options - use these to quicken up the set up.

####################################
# Local Area Network configuration.
#
# your LANs IP range and localhost IP. /24 means to only use the first 24 bits of the 32 bit IP adress. the same as netmask 255.255.255.0

LAN_IP="192.168.0.2"
LAN_IP_RANGE="192.168.0.0/16"
LAN_BCAST_ADRESS="192.168.0.255"
LAN_IFACE="eth1"

######################################
#
# Localhost configuration.
#
# Localhost Interface and IP. Should not need any changes.
#

LO_IFACE="lo"
LO_IP="127.0.0.1"

#######################################
#
# Internet configuration.
#
# All information pertaining to the Internet and the Internet connection.
#

INET_IFACE="eth0"

#######################################
#
# DHCP Configuration.
#
# Information pertaining to DHCP over the Internet, if needed.
#
# Set DHCP variable to No if you dont get IP from DHCP. If you get DHCP over the Internet set this variable to Yes, and set up the proper IP adress for the DHCP server in the DHCP_SERVER variable.

DHCP="No"
DHCP_SERVER="195.22.90.65"

#########################################
#
# PPPOE Configuration.
#
# Configuration options pertaining to PPPoE.
#
# If you have problem with your PPPoE connection, such as large mails not getting through while small mail get through properly etc, you may set this option to "yes" which may fix the problem. This option will set a rule in the PREROUTING chain of the mangle table which will clamp (resize) all routed packets to PMTU (Path Maximum Transmit Unit).
#
# Note that it is better to set this up in the PPPoE package itself, since the PPPoE configuration option will give less overhead.

PPPOE_PMTU="No"

##########################################
#
# IPTABLES configuration.
#
# Options pertaining to iptables such as searchpath, etc.
#

IPTABLES="/usr/sbin/iptables"

Short URL Script allows you to have a URL shortening service under your own domain.
Short URL Script script can create shorter URLs that do not break in e-mails. As a site owner you can use the script for managing downloads, masking URLs and keeping track of how many times a link has been clicked.
Main features:
- Visitors can enter a URL and create a short URL that redirects to the original URL
- Visitors can enter an individual ID instead of the randomly created string
- Admin area for deactivating, activating, deleting and searching URLs
- Completely template driven
- Installation routine

iptables firewall script is an Linux firewall based on the iptables software.

Sample:

######## START FUNCTIONS #########
scripthelp () {
cat /dev/null 2>&1

Every 5 minutes
*/5 * * * * /path/to/this/script restart > /dev/null 2>&1

refresh
-------

Dumps current rules and reloads them.

stop
----

Dumps current rules and halts firewall.
---------------------------------------------------------

Usage: $0 [start|restart|refresh|stop]

SCRIPTHELP
}

fireme () {
if [ -z "`lsmod|grep iptable_filter`" ];
then
modprobe iptable_filter
fi

#######################################
#---------- Start predefined target rulesets ----------#
#######################################

# On the fly
$PROG -N ONTHEFLY
$PROG -A ONTHEFLY -j LOG --log-level 5 --log-prefix "TL0G_ONTHEFLY: "
$PROG -A ONTHEFLY -j DROP

# DENIED PORTS Privileged (1-1023) Target Ruleset
$PROG -N DENIED_PORT_PRIV
$PROG -A DENIED_PORT_PRIV -m state --state RELATED,ESTABLISHED -j ACCEPT
$PROG -A DENIED_PORT_PRIV -j LOG --log-level 5 --log-prefix "TL0G_DENIED_PORT_PRIV: "
$PROG -A DENIED_PORT_PRIV -j DROP

# DENIED PORTS Unprivileged TCP (1024+) Target Ruleset
$PROG -N DENIED_PORT_UNPRIV_TCP
$PROG -A DENIED_PORT_UNPRIV_TCP -m state --state RELATED,ESTABLISHED -j ACCEPT
$PROG -A DENIED_PORT_UNPRIV_TCP -j LOG --log-level 5 --log-prefix "TL0G_DENIED_PORT_T-UNPRIV: "
$PROG -A DENIED_PORT_UNPRIV_TCP -m state --state NEW,INVALID -j DROP

# DENIED PORTS Unprivileged UDP (1024+) Target Ruleset
$PROG -N DENIED_PORT_UNPRIV_UDP
$PROG -A DENIED_PORT_UNPRIV_UDP -j LOG --log-level 5 --log-prefix "TL0G_DENIED_PORT_U-UNPRIV: "
$PROG -A DENIED_PORT_UNPRIV_UDP -j DROP

#######################################
#---------- End predefined target rulesets ----------#
######################################

# Services
$PROG -A INPUT -p tcp --dport 0:112 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_PRIV
$PROG -A INPUT -p udp --dport 0:112 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_PRIV

$PROG -A INPUT -p tcp --dport 114:1023 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_PRIV
$PROG -A INPUT -p udp --dport 114:1023 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_PRIV

# NFS
$PROG -A INPUT -p tcp --dport 2049 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_UNPRIV_TCP
$PROG -A INPUT -p udp --dport 2049 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_UNPRIV_UDP

# X11
$PROG -A INPUT -p tcp --dport 6000:6005 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_UNPRIV_TCP
$PROG -A INPUT -p udp --dport 6000:6005 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_UNPRIV_UDP

# Netbus
$PROG -A INPUT -p tcp --dport 12345:12346 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_UNPRIV_TCP
$PROG -A INPUT -p udp --dport 12345:12346 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_UNPRIV_UDP

# Deny all else on TCP unless initiated from local machine/network.
# This rule covers NFS, X11, and Netbus listed above, its a catch-all for any TCP
# ports you may have services running on, but dont know what ports they use.
# Prevents an accidental crack attempt via TCP services.
# If you wish to allow any services, or alter the existing rules, they must be
# added BEFORE the rule below.

$PROG -A INPUT -p tcp --dport 1024:65535 -s 0/0 -d $IP -i $IFACE -j DENIED_PORT_UNPRIV_TCP

echo "[ [32;01mOK [0m]"
echo "rc.firewall loaded with IP: $IP and interface: $IFACE."
}

########################### END FUNCTIONS ##########################

##############################################
#----------------- START CONFIGURATION SECTION --------------------#
##############################################
# Set path to iptables program

PROG=/path/to/iptables

# Set interface type, ie; eth0, ppp0

IFACE=""

###############################################
#------------------ END CONFIGURATION SECTION ---------------------#
##############################################

# Test to make sure configuration variables are set, die if not.

if [ ! -x "$PROG" ] || [ -z "$IFACE" ];
then
echo "$PROG is not executable, or interface is not set, exiting."
exit 0
else

# Get current IP address

IP=`ifconfig $IFACE| grep inet| cut -f2 -d:| cut -f1 -d" "`

# Get old IP from last firewall load (if any).
# The purpose of getting OLDIP is so you can use this script in a cron
# job to update the firewall with the current IP, great for dialups
# and other dynamic connections.
# Examples:
# Check every 15 minutes:
# */15 * * * * /path/to/this/script restart > /dev/null 2>&1
# Check every 5 minutes:
# */5 * * * * /path/to/this/script restart > /dev/null 2>&1

OLDIP=`$PROG -n -L INPUT| grep 6005|grep udp| cut -b55-|cut -f1 -d u`

case $1 in

start)
if [ -z "$OLDIP" ];
then
echo -n "Starting firewall..."
fireme
elif [ $IP = $OLDIP ];
then
echo "FIREWALL IS UPDATED."
fi
;;
restart)
echo -n "Restarting firewall..."
if [ -z "`$PROG -n -L INPUT| grep 6005`" ];
then
fireme
elif [ $IP = $OLDIP ];
then
echo "FIREWALL IS UPDATED."
else
for i in DENIED_PORT_PRIV DENIED_PORT_UNPRIV_TCP DENIED_PORT_UNPRIV_UDP ONTHEFLY
do
$PROG -F $i
$PROG -F INPUT
$PROG -F FORWARD
$PROG -X $i
done
fireme
fi
;;
refresh)
echo -n "Resetting firewall..."
if [ -z "`$PROG -n -L INPUT| grep 6005`" ];
then
fireme
else
for i in DENIED_PORT_PRIV DENIED_PORT_UNPRIV_TCP DENIED_PORT_UNPRIV_UDP ONTHEFLY
do
$PROG -F $i
$PROG -F INPUT
$PROG -F FORWARD
$PROG -X $i
done
fireme
fi
;;
stop)
for i in DENIED_PORT_PRIV DENIED_PORT_UNPRIV_TCP DENIED_PORT_UNPRIV_UDP ONTHEFLY
do
$PROG -F $i
$PROG -F INPUT
$PROG -F FORWARD
$PROG -X $i
done
echo "Firewall stopped...[ [32;01mOK [0m]"
;;
*)
echo
scripthelp
;;
esac
fi

Icecast amaroK script is an Icecast/Darkice script for amaroK.

Functions:

- It sends the title of the song being played to an Icecast server.
- It can start your Icecast server and Darkice on amaroK starting
- It allows you to stream what you are listening to in amaroK (in fact everything you are listening to!!!).

Utilisateurs francophones, regardez le tutoriel http://www.trustonme.net/didactels/341.html

Aardvark Topsites PHP is simply the best topsites script available. Aardvark Topsites PHP project is licensed under the GNU General Public License so it will always remain completely free.
Main features:
- Members ranks can be shown on their button.
- New: Stat Buttons, allowing you to customize your buttons and display all kinds of stats on them
- 6 different ranking methods
- Counts unique pageviews, total pageviews, unique hits in, total hits in, unique hits out, and total hits out
- New: Rank daily, weekly, or monthly
- Up/down/neutral arrows
- Customizable categories
- Fully customizeable skins: make your topsites look however you want!
- Simple web-based installer and upgrader
- Multiple pages
- Member login and lost password retrieval
- Seamlessly switches between languages
- Fast, integrated search
- Ad breaks
- Visitors can rate and review members
- Advanced stats and graphs
- Easy to install and maintain
- Powerful admin
- New: Mass mail members
- Best of all, its completely free!
Enhancements:
- A tool to backup database was added in the admin interface.
- A more secure captcha, with a link for users to get a new captcha if the user cant read the first one.
- The gateway page for the Fusion skin was redesigned.
- Sites may be banned by URL, IP address, username, or email address.
- An optional security question is asked on join to block spammers.
- By default, new members must be approved by the admin before they are listed, and changes to the title or URL of a site must be approved by the admin.
- A summary of overall statistics is displayed on the main page.