to probe
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 132
Download (10.39MB)
Added: 2009-04-05 License: Fully functional Price: $0
11461 downloads
Other version of Network Probe
Network Probe and protocol analyzer is the ultimate tool for traffic-level ... , analysis, If your network is crawling to a standstill, and you suspect there might be a problemLicense:Freeware
THC-Probe 4.1
THC-Probe is the ultimate host scanner compilation for Linux, featuring nmap, snmpscan, netbios auditing tool. more>>
THC-Probe is the ultimate host scanner compilation for Linux, featuring nmap, snmpscan, netbios auditing tool and super-cool vh shell script.
INSTALL: just run "make install". Everything will be installed in /usr/local
RUN: just run "netprobe" and see the options.
Every host scanned will be saved as a "host.bla.com.probe" file in your current directory.
It does many stuff like snmp guessing, samba pw guessing and information gathering.
Nothing great and big, but it suits my needs.
<<lessINSTALL: just run "make install". Everything will be installed in /usr/local
RUN: just run "netprobe" and see the options.
Every host scanned will be saved as a "host.bla.com.probe" file in your current directory.
It does many stuff like snmp guessing, samba pw guessing and information gathering.
Nothing great and big, but it suits my needs.
Download (0.64MB)
Added: 2006-03-08 License: GPL (GNU General Public License) Price:
1333 downloads
fprobe 0.4
fprobe is a small NetFlow probe which will listen on a network interface. more>>
fprobe is a small NetFlow probe which will listen on a network interface. It isusing libpcap, aggregate the traffic and export NetFlow V5 datagram to a remote collector for processing. A flow is identified by ip protocol, source ip, source port, destination ip, destination port.
Right now only ethernet interfaces are supported. Support for more media types (tunnel, ppp etc) will be added in nex versions.
/fprobe -t IP:PORT [ -i interface ] [ -s scan ] [ expression ]
-t IP:PORT NetFlow collector address
-i interface interface to listen for traffic (default eth0)
-s scan interval in seconds between two flow tables scans (Default: 10)
-c file file with MAC definitions
-p dont put the interface in promisc mode
-b go in background (daemon mode)
-l file log file name
expression a bpf expresion to filter traffic (See libpcap/tcpdump)
For example:
./fprobe -i eth2 -t 127.0.0.1:8182
This will sniff the traffic on interface eth2 and will send the NetFlow data to localhost (127.0.0.1) on UDP port 8182.
Internal flow table is parsed every scan seconds for expired flows which are sent to remote collector.
Enhancements:
- can handle IP fragments
- can set the snmp interface ID based on source/destination MAC address
- fixed uptime in exported flows
- new hash function for internal storage
- delay between udp datagrams emited
<<lessRight now only ethernet interfaces are supported. Support for more media types (tunnel, ppp etc) will be added in nex versions.
/fprobe -t IP:PORT [ -i interface ] [ -s scan ] [ expression ]
-t IP:PORT NetFlow collector address
-i interface interface to listen for traffic (default eth0)
-s scan interval in seconds between two flow tables scans (Default: 10)
-c file file with MAC definitions
-p dont put the interface in promisc mode
-b go in background (daemon mode)
-l file log file name
expression a bpf expresion to filter traffic (See libpcap/tcpdump)
For example:
./fprobe -i eth2 -t 127.0.0.1:8182
This will sniff the traffic on interface eth2 and will send the NetFlow data to localhost (127.0.0.1) on UDP port 8182.
Internal flow table is parsed every scan seconds for expired flows which are sent to remote collector.
Enhancements:
- can handle IP fragments
- can set the snmp interface ID based on source/destination MAC address
- fixed uptime in exported flows
- new hash function for internal storage
- delay between udp datagrams emited
Download (0.020MB)
Added: 2006-07-05 License: GPL (GNU General Public License) Price:
1214 downloads
MRTG-eth-probe 1.5.5
MRTG-eth-probe provides a probe for the Multi Router Traffic Grapher. more>>
MRTG-eth-probe provides a probe for the Multi Router Traffic Grapher, generating statistics for network devices that do not support the SNMP protocol. It reads interface stats from /proc/net/dev (or some other file you configure), and generates an output readable for MRTG by parsing the file.
Since the starting of this project MRTG-eth-probe has been downloaded more than 1700 times (as of 2001-11-04). Thanks for this go first of all to Freshmeat for accepting the project and for redirecting so much people to my sourceforge projectpage Additional thanks go to Michael Feger for sending me a patch to 1.5.2 which makes up the most important changes of this release.
Enhancements:
- bugfix: missing dot
<<lessSince the starting of this project MRTG-eth-probe has been downloaded more than 1700 times (as of 2001-11-04). Thanks for this go first of all to Freshmeat for accepting the project and for redirecting so much people to my sourceforge projectpage Additional thanks go to Michael Feger for sending me a patch to 1.5.2 which makes up the most important changes of this release.
Enhancements:
- bugfix: missing dot
Download (0.010MB)
Added: 2006-06-29 License: GPL (GNU General Public License) Price:
1215 downloads
mrtg-mica-probe 0.0.2
mrtg-mica-probe is a Telebit MicaBlazer modem usage probe. more>>
mrtg-mica-probe is a Telebit MicaBlazer modem usage probe.
mrtg-mica-probe is a modem usage probe for the ITK NetBlazer 6100 (formerly Telebit MicaBlazer) 3.32. It is used to monitor the number of used modem and ISDN lines.
The latest release of mrtg-mica-probe can always be found on the web at http://pwo.de/projects/mrtg/ or via anonymous ftp at ftp://ftp.pwo.de/pub/pwo/mrtg/mrtg-mica-probe/.
mrtg.cfg-mica shows some sample mrtg.cfg entries.
Enhancements:
- added documentation to workaround a Telebit bug that might prevent SNMP from starting correctly.
<<lessmrtg-mica-probe is a modem usage probe for the ITK NetBlazer 6100 (formerly Telebit MicaBlazer) 3.32. It is used to monitor the number of used modem and ISDN lines.
The latest release of mrtg-mica-probe can always be found on the web at http://pwo.de/projects/mrtg/ or via anonymous ftp at ftp://ftp.pwo.de/pub/pwo/mrtg/mrtg-mica-probe/.
mrtg.cfg-mica shows some sample mrtg.cfg entries.
Enhancements:
- added documentation to workaround a Telebit bug that might prevent SNMP from starting correctly.
Download (0.029MB)
Added: 2007-07-12 License: GPL (GNU General Public License) Price:
835 downloads
mrtg-ntap-probe 0.4.0
mrtg-ntap-probe can probe for Network Appliance NetCache caching appliance and NetApp Filer. more>>
mrtg-ntap-probe can probe for Network Appliance NetCache caching appliance and NetApp Filer.
mrtg-ntap-probe retrieves the disk and file (inode) utilization by volume or quota tree name, so you do not need to find the right OID, which might change over time as you add and/or remove volumes and quota trees.
You need a recent release of mrtg 2.x, perl 5.003 or better, a NetApp NetCache appliance with NetCache release 5.1 or better and/or a Network Appliance Filer running Data Ontap 6.0 or better.
If you have a Network Appliance service contract and access to their software tools library on now.netapp.com, you should also take a look at their mrtg-filer and mrtg-netcache packages!
<<lessmrtg-ntap-probe retrieves the disk and file (inode) utilization by volume or quota tree name, so you do not need to find the right OID, which might change over time as you add and/or remove volumes and quota trees.
You need a recent release of mrtg 2.x, perl 5.003 or better, a NetApp NetCache appliance with NetCache release 5.1 or better and/or a Network Appliance Filer running Data Ontap 6.0 or better.
If you have a Network Appliance service contract and access to their software tools library on now.netapp.com, you should also take a look at their mrtg-filer and mrtg-netcache packages!
Download (0.019MB)
Added: 2007-07-12 License: GPL (GNU General Public License) Price:
838 downloads
mrtg-misc-probe 0.3.0
mrtg-misc-probe probes different system features for mrtg to graph. more>>
mrtg-misc-probe probes different system features for mrtg to graph.
Currently it can probe:
- percent usage of disk space and inodes for UFS filesystems
- percent usage of disk space for VxFS filesystems
- incoming and outgoing mail messages on sendmail mail server
- total size of mail messages sendt and received on sendmail mail server
- network delay using NTP peers/servers
- number of ClearCase vobs and views
- number of available and used ClearCase and MultiSite licenses
- number of active and disconnected sessions of a Citrix Metaframe server
- number of reachable hosts in a given network range
- network device reachability (ping success)
Enhancements:
- New probes: ctxmf - number of active and disconnected Citrix Metaframe sessions; hostcount - scan given nmap-network-range and return number of hosts found.
<<lessCurrently it can probe:
- percent usage of disk space and inodes for UFS filesystems
- percent usage of disk space for VxFS filesystems
- incoming and outgoing mail messages on sendmail mail server
- total size of mail messages sendt and received on sendmail mail server
- network delay using NTP peers/servers
- number of ClearCase vobs and views
- number of available and used ClearCase and MultiSite licenses
- number of active and disconnected sessions of a Citrix Metaframe server
- number of reachable hosts in a given network range
- network device reachability (ping success)
Enhancements:
- New probes: ctxmf - number of active and disconnected Citrix Metaframe sessions; hostcount - scan given nmap-network-range and return number of hosts found.
Download (0.017MB)
Added: 2007-07-12 License: GPL (GNU General Public License) Price:
836 downloads
mrtg-ping-probe 2.2.0
mrtg-ping-probe project monitors round trip time and packet loss to another host. more>>
mrtg-ping-probe project monitors round trip time and packet loss to another host. Still on my TODO list: add own min/max/avg rtt calculation, add perl ping module, add rping and rsh support...
mrtg-ping-probe is a ping probe for MRTG 2.x. It is used to monitor the round trip time and packet loss to networked devices. MRTG uses its output to generate graphs visualizing minimum and maximum round trip times or packet loss.
mrtg-ping-probe depends on the following software being installed on your system: perl (at least version 5.6.1), mrtg (I use version 2.8.8, though any mrtg 2.x version should work), and a ping program that displays a summary of the round trip times upon termination or timeout.
mrtg-ping-probe runs on AIX, BSD/OS 2.1, FreeBSD/2.2.x, IRIX/6.2, Linux, Mac OS X (Darwin 5.4), NetBSD, OpenBSD, OS/2, OSF1 V3.2, Solaris 1.1.2 (SunOS 4.1.4), Solaris 2.5.1 (SunOS 5.5.1), Solaris 7 (SunOS 5.7), Solaris 8 (SunOS 5.8), Solaris 9 (SunOS 5.9), HP-UX 9, Windows 98, and Windows 2000 (english, french, portugesee, and spanish locales).
If you install the Windows ping program that comes with Windows 98, Windows 2000, or WinSock 2.x, mrtg-ping-probe will also run on Windows 95 and Windows 4.0.
Support for additional systems is usually easy to add, as described in the file INSTALL.
Act responsible: do not use mrtg-ping-probe to ping devices without the owners permission. Just imagine 10,000 people would decide to ping your hosts ... mrtg-ping-probe is meant to be used within your network to get round trip time performance figures for your network.
Usage: mrtg-ping-probe [-hsvV] [-d deadtime] [-k count] [-l length] [-o ping_options] [-p [factor*]{min|max|avg|loss|integer}/[factor*]{min|max|avg|loss|integer}] [-r [rsh:][user@]host[:osname]] [-t timeout] host
Enhancements:
- new platforms supported: italian Windows 2000 locale.
- bugfixes: on Windows actually return deadtime when we lost all packets, not 0. the ping child process should actually be killed now on Unix platforms.
- changes: ***** Possible Incompatability ***** raised minimum required perl version to 5.6.1. lots of typos fixed.
<<lessmrtg-ping-probe is a ping probe for MRTG 2.x. It is used to monitor the round trip time and packet loss to networked devices. MRTG uses its output to generate graphs visualizing minimum and maximum round trip times or packet loss.
mrtg-ping-probe depends on the following software being installed on your system: perl (at least version 5.6.1), mrtg (I use version 2.8.8, though any mrtg 2.x version should work), and a ping program that displays a summary of the round trip times upon termination or timeout.
mrtg-ping-probe runs on AIX, BSD/OS 2.1, FreeBSD/2.2.x, IRIX/6.2, Linux, Mac OS X (Darwin 5.4), NetBSD, OpenBSD, OS/2, OSF1 V3.2, Solaris 1.1.2 (SunOS 4.1.4), Solaris 2.5.1 (SunOS 5.5.1), Solaris 7 (SunOS 5.7), Solaris 8 (SunOS 5.8), Solaris 9 (SunOS 5.9), HP-UX 9, Windows 98, and Windows 2000 (english, french, portugesee, and spanish locales).
If you install the Windows ping program that comes with Windows 98, Windows 2000, or WinSock 2.x, mrtg-ping-probe will also run on Windows 95 and Windows 4.0.
Support for additional systems is usually easy to add, as described in the file INSTALL.
Act responsible: do not use mrtg-ping-probe to ping devices without the owners permission. Just imagine 10,000 people would decide to ping your hosts ... mrtg-ping-probe is meant to be used within your network to get round trip time performance figures for your network.
Usage: mrtg-ping-probe [-hsvV] [-d deadtime] [-k count] [-l length] [-o ping_options] [-p [factor*]{min|max|avg|loss|integer}/[factor*]{min|max|avg|loss|integer}] [-r [rsh:][user@]host[:osname]] [-t timeout] host
Enhancements:
- new platforms supported: italian Windows 2000 locale.
- bugfixes: on Windows actually return deadtime when we lost all packets, not 0. the ping child process should actually be killed now on Unix platforms.
- changes: ***** Possible Incompatability ***** raised minimum required perl version to 5.6.1. lots of typos fixed.
Download (0.036MB)
Added: 2007-07-16 License: GPL (GNU General Public License) Price:
554 downloads
ntop 3.3
ntop is a network probe that shows network usage in a way similar to what top does for processes. more>>
ntop is a network traffic probe that shows the network usage, similar to what the popular top Unix command does.
The project is based on libpcap and it has been written in a portable way in order to virtually run on every Unix platform and on Win32 as well.
ntop users can use a a web browser (e.g. netscape) to navigate through ntop (that acts as a web server) traffic information and get a dump of the network status.
In the latter case, ntop can be seen as a simple RMON-like agent with an embedded web interface. The use of:
a web interface
limited configuration and administration via the web interface
reduced CPU and memory usage (they vary according to network size and traffic)
make ntop easy to use and suitable for monitoring various kind of networks.
Main features:
- Sort network traffic according to many protocols
- Show network traffic sorted according to various criteria
- Display traffic statistics
- Store on disk persistent traffic statistics in RRD format
- Identify the indentity (e.g. email address) of computer users
- Passively (i.e. withou sending probe packets) identify the host OS
- Show IP traffic distribution among the various protocols
- Analyse IP traffic and sort it according to the source/destination
- Display IP Traffic Subnet matrix (whos talking to who?)
- Report IP protocol usage sorted by protocol type
- Act as a NetFlow/sFlow collector for flows generated by routers (e.g. Cisco and Juniper) or switches (e.g. Foundry Networks)
- Produce RMON-like network traffic statistics
Additional features of "ntop":
- Network Flows
- Local Traffic Analysis
- Multithread and MP (MultiProcessor) support on both Unix and Win32
- Perl/PHP/Python lightweight API for accessing ntop from remote
- Support of both NetFlow andsFlow as flow collector. ntop can collect simultaneously from multiple probes.
- Traffic statistics are saved into RRD databases for long-run traffic analysis.
- Internet Domain, AS (Autonomous Systems), VLAN (Virtual LAN) Statistics
- Network assets discovery and categorization according to their OS and users
- Protocol decoders for most of known P2P (Peer to Peer) protocols
- Advanced per user HTTP password protection with encrypted passwords
- RRD support for persistently storing per-host traffic information
- Passive remote host fingerprint (Courtesy of ettercap)
- HTTPS (Secure HTTP via OpenSSL)
- Virtual/multiple network interfaces support
- Graphical Charts (via gdchart)
- WAP support
<<lessThe project is based on libpcap and it has been written in a portable way in order to virtually run on every Unix platform and on Win32 as well.
ntop users can use a a web browser (e.g. netscape) to navigate through ntop (that acts as a web server) traffic information and get a dump of the network status.
In the latter case, ntop can be seen as a simple RMON-like agent with an embedded web interface. The use of:
a web interface
limited configuration and administration via the web interface
reduced CPU and memory usage (they vary according to network size and traffic)
make ntop easy to use and suitable for monitoring various kind of networks.
Main features:
- Sort network traffic according to many protocols
- Show network traffic sorted according to various criteria
- Display traffic statistics
- Store on disk persistent traffic statistics in RRD format
- Identify the indentity (e.g. email address) of computer users
- Passively (i.e. withou sending probe packets) identify the host OS
- Show IP traffic distribution among the various protocols
- Analyse IP traffic and sort it according to the source/destination
- Display IP Traffic Subnet matrix (whos talking to who?)
- Report IP protocol usage sorted by protocol type
- Act as a NetFlow/sFlow collector for flows generated by routers (e.g. Cisco and Juniper) or switches (e.g. Foundry Networks)
- Produce RMON-like network traffic statistics
Additional features of "ntop":
- Network Flows
- Local Traffic Analysis
- Multithread and MP (MultiProcessor) support on both Unix and Win32
- Perl/PHP/Python lightweight API for accessing ntop from remote
- Support of both NetFlow andsFlow as flow collector. ntop can collect simultaneously from multiple probes.
- Traffic statistics are saved into RRD databases for long-run traffic analysis.
- Internet Domain, AS (Autonomous Systems), VLAN (Virtual LAN) Statistics
- Network assets discovery and categorization according to their OS and users
- Protocol decoders for most of known P2P (Peer to Peer) protocols
- Advanced per user HTTP password protection with encrypted passwords
- RRD support for persistently storing per-host traffic information
- Passive remote host fingerprint (Courtesy of ettercap)
- HTTPS (Secure HTTP via OpenSSL)
- Virtual/multiple network interfaces support
- Graphical Charts (via gdchart)
- WAP support
Download (2.4MB)
Added: 2007-06-10 License: GPL (GNU General Public License) Price:
547 downloads
Linux Test Project 20070731
The Linux Test Project is a joint project with SGI, IBM, OSDL, Bull, and Wipro Technologies. more>>
Linux Test Project is a joint project with SGI, IBM, OSDL, Bull, and Wipro Technologies with a goal to deliver test suites to the open source community that validate the reliability, robustness, and stability of Linux.
The project consists of well over 2000 individual testcases and a test driver to automate execution of the tests.
Whats New in This Release:
1) Log Message: lcov: preparations for new release by "oberpapr@users.sourceforge.net"
- updated CHANGES file
- added compat-libtool + no-compat-libtool option
- changed libtool default to on (due to popular request)
- added checksum option
- changed checksum default to off (to reduce cpu time + file size)
- added geninfo_checksum option to lcovrc, deprecated geninfo_no_checksum
- added geninfo_compat_libtool option to lcovrc
- minor update of README file
File(s) Affected:
ltp/utils/analysis/lcov/CHANGES
ltp/utils/analysis/lcov/README
ltp/utils/analysis/lcov/lcovrc
ltp/utils/analysis/lcov/bin/geninfo
ltp/utils/analysis/lcov/bin/lcov
2) Log Message: update manpage by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/man/lcov.1
3) Log Message: "sachinp@in.ibm.com" has fixed a probe point definition from ll_rw_lock to ll_rw_block
File(s) Affected:
ltp/testcases/kdump/susetools/lkdtm_mod/lkdtm.c
4) Log Message: man page update by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/man/genhtml.1
ltp/utils/analysis/lcov/man/geninfo.1
ltp/utils/analysis/lcov/man/lcov.1
5) Log Message: lcov: another update in preparation for a new release by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/bin/lcov
ltp/utils/analysis/lcov/man/lcovrc.5
ltp/utils/analysis/lcov/CHANGES
ltp/utils/analysis/lcov/lcovrc
6) Log Message: fixed bug that would not delete .gcda files when using -z, by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/CHANGES
ltp/utils/analysis/lcov/bin/lcov
7) Log Message: lcov: - add new option --initial to get zero coverage data from graph files by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/CHANGES
ltp/utils/analysis/lcov/bin/geninfo
ltp/utils/analysis/lcov/bin/lcov
ltp/utils/analysis/lcov/man/geninfo.1
ltp/utils/analysis/lcov/man/lcov.1
8) Log Message: "carmelo.amoroso@st.com" fixed the anomaly when "SHLBA != getpagesize()", like in SH architecture
File(s) Affected:
ltp/testcases/kernel/mem/shmt/shmt09.c
9) Log Message: "hdeller@users.sf.net" fixed unitialized variable useage in "lseek09" testcase
File(s) Affected:
ltp/testcases/kernel/syscalls/lseek/lseek09.c
10) Log Message: "naveenspen@gmail.com" pointed out that syslog_cmd="/etc/init.d/syslog" should be used irrespective of any Distro
File(s) Affected:
ltp/testcases/kernel/syscalls/syslog/syslog01
ltp/testcases/kernel/syscalls/syslog/syslog02
ltp/testcases/kernel/syscalls/syslog/syslog03
ltp/testcases/kernel/syscalls/syslog/syslog04
ltp/testcases/kernel/syscalls/syslog/syslog05
ltp/testcases/kernel/syscalls/syslog/syslog06
ltp/testcases/kernel/syscalls/syslog/syslog07
ltp/testcases/kernel/syscalls/syslog/syslog08
ltp/testcases/kernel/syscalls/syslog/syslog09
ltp/testcases/kernel/syscalls/syslog/syslog10
11) Log Message: "rsalveti@linux.vnet.ibm.com" pointed out to have same "fsx-linux" testcase for "fs", "ltp-aiodio" and "nfs"
File(s) Affected:
ltp/testcases/kernel/io/ltp-aiodio/fsx-linux.c
ltp/testcases/network/nfs/fsx-linux/fsx-linux.c
12) Log Message: Randy Dunlap writes: Fix printf format warnings
File(s) Affected:
ltp/testcases/network/stress/ns-tools/Makefile
ltp/testcases/network/stress/ns-tools/ns-igmp_querier.c
ltp/testcases/network/stress/ns-tools/ns-mcast_join.c
ltp/testcases/network/stress/ns-tools/ns-mcast_receiver.c
ltp/testcases/network/stress/ns-tools/ns-tcpserver.c
13) Log Message: getsockopt() takes a socklen_t, not an int, as its optlen
File(s) Affected:
ltp/testcases/network/stress/ns-tools/ns-tcpclient.c
ltp/testcases/network/stress/ns-tools/ns-tcpserver.c
ltp/testcases/network/stress/ns-tools/ns-udpserver.c
14) Log Message: cleanup file
File(s) Affected:
ltp/testcases/kernel/syscalls/gethostid/gethostid01.c
15) Log Message: back out uclinux changes to something that doesnt spit warnings as reported by Randy Dunlap
File(s) Affected:
ltp/testcases/kernel/syscalls/gethostid/gethostid01.c
16) Log Message: fixup gcc warnings by removing silly pieces of code
File(s) Affected:
ltp/testcases/kernel/mem/mtest06/mmap1.c
ltp/testcases/kernel/mem/mtest06/mmap2.c
ltp/testcases/kernel/mem/mtest06/mmap3.c
ltp/testcases/kernel/mem/mtest06/shmat1.c
17) Log Message: Randy Dunlap writes: Convert mmap1 to use standard test results output format. Correct several typos.
File(s) Affected:
ltp/testcases/kernel/mem/mtest06/Makefile
ltp/testcases/kernel/mem/mtest06/mmap1.c
18) Log Message: gcov-kernel: adding gcov-kernel patch for 2.6.22
File(s) Addes:
ltp/utils/analysis/gcov-kernel/linux-2.6.22-gcov-arm-hack.patch
ltp/utils/analysis/gcov-kernel/linux-2.6.22-gcov.patch
19) Log Message: [1754301] Helge Deller writes: mark hppa/parisc as expecting a segv as well
File(s) Affected:
ltp/testcases/kernel/syscalls/mmap/mmap03.c
20) Log Message: Randy Dunlap writes: convert output to match the standard LTP output
File(s) Affected:
ltp/testcases/kernel/fs/linktest/linktest.pl
21) Log Message: close stdout to remove noise
File(s) Affected:
ltp/testcases/kernel/mem/mtest05/dummy.c
22) Log Message: Randy Dunlap writes: Convert mmstress to use the standard results format
File(s) Affected:
ltp/testcases/kernel/mem/mtest05/Makefile
ltp/testcases/kernel/mem/mtest05/mmstress.c
23) Log Message: "rsalveti@linux.vnet.ibm.com" updated the contact information at ltp-howto doc
File(s) Affected:
ltp/doc/ltp-howto.lyx
ltp/doc/ltp-howto.txt
24) Log Message: "rsalveti@linux.vnet.ibm.com" wants to update this with kernel/fs/fsstress/fsstress.c
File(s) Affected:
ltp/testcases/network/nfs/nfs_fsstress/fsstress.c
25) Log Message: "suzuki@in.ibm.com" added SIGNAL and Address Fault handling capability for all architectures
File(s) Affected:
ltp/testcases/kernel/mem/mtest06/mmap1.c
26) Log Message: "rsalveti@linux.vnet.ibm.com" added more options to runltp
File(s) Affected:
ltp/runltp
ltp/doc/man1/pan.1
ltp/pan/pan.c
27) Log Message: Upgrade to Posix Testsuite 1.5.2
File(s) Affected/Added:
ltp/testcases/open_posix_testsuite
28) Log Message: Fixing Proper Freeing of Memory Chunks
File(s) Affected:
ltp/tools/genload/stress.c
<<lessThe project consists of well over 2000 individual testcases and a test driver to automate execution of the tests.
Whats New in This Release:
1) Log Message: lcov: preparations for new release by "oberpapr@users.sourceforge.net"
- updated CHANGES file
- added compat-libtool + no-compat-libtool option
- changed libtool default to on (due to popular request)
- added checksum option
- changed checksum default to off (to reduce cpu time + file size)
- added geninfo_checksum option to lcovrc, deprecated geninfo_no_checksum
- added geninfo_compat_libtool option to lcovrc
- minor update of README file
File(s) Affected:
ltp/utils/analysis/lcov/CHANGES
ltp/utils/analysis/lcov/README
ltp/utils/analysis/lcov/lcovrc
ltp/utils/analysis/lcov/bin/geninfo
ltp/utils/analysis/lcov/bin/lcov
2) Log Message: update manpage by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/man/lcov.1
3) Log Message: "sachinp@in.ibm.com" has fixed a probe point definition from ll_rw_lock to ll_rw_block
File(s) Affected:
ltp/testcases/kdump/susetools/lkdtm_mod/lkdtm.c
4) Log Message: man page update by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/man/genhtml.1
ltp/utils/analysis/lcov/man/geninfo.1
ltp/utils/analysis/lcov/man/lcov.1
5) Log Message: lcov: another update in preparation for a new release by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/bin/lcov
ltp/utils/analysis/lcov/man/lcovrc.5
ltp/utils/analysis/lcov/CHANGES
ltp/utils/analysis/lcov/lcovrc
6) Log Message: fixed bug that would not delete .gcda files when using -z, by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/CHANGES
ltp/utils/analysis/lcov/bin/lcov
7) Log Message: lcov: - add new option --initial to get zero coverage data from graph files by "oberpapr@users.sourceforge.net"
File(s) Affected:
ltp/utils/analysis/lcov/CHANGES
ltp/utils/analysis/lcov/bin/geninfo
ltp/utils/analysis/lcov/bin/lcov
ltp/utils/analysis/lcov/man/geninfo.1
ltp/utils/analysis/lcov/man/lcov.1
8) Log Message: "carmelo.amoroso@st.com" fixed the anomaly when "SHLBA != getpagesize()", like in SH architecture
File(s) Affected:
ltp/testcases/kernel/mem/shmt/shmt09.c
9) Log Message: "hdeller@users.sf.net" fixed unitialized variable useage in "lseek09" testcase
File(s) Affected:
ltp/testcases/kernel/syscalls/lseek/lseek09.c
10) Log Message: "naveenspen@gmail.com" pointed out that syslog_cmd="/etc/init.d/syslog" should be used irrespective of any Distro
File(s) Affected:
ltp/testcases/kernel/syscalls/syslog/syslog01
ltp/testcases/kernel/syscalls/syslog/syslog02
ltp/testcases/kernel/syscalls/syslog/syslog03
ltp/testcases/kernel/syscalls/syslog/syslog04
ltp/testcases/kernel/syscalls/syslog/syslog05
ltp/testcases/kernel/syscalls/syslog/syslog06
ltp/testcases/kernel/syscalls/syslog/syslog07
ltp/testcases/kernel/syscalls/syslog/syslog08
ltp/testcases/kernel/syscalls/syslog/syslog09
ltp/testcases/kernel/syscalls/syslog/syslog10
11) Log Message: "rsalveti@linux.vnet.ibm.com" pointed out to have same "fsx-linux" testcase for "fs", "ltp-aiodio" and "nfs"
File(s) Affected:
ltp/testcases/kernel/io/ltp-aiodio/fsx-linux.c
ltp/testcases/network/nfs/fsx-linux/fsx-linux.c
12) Log Message: Randy Dunlap writes: Fix printf format warnings
File(s) Affected:
ltp/testcases/network/stress/ns-tools/Makefile
ltp/testcases/network/stress/ns-tools/ns-igmp_querier.c
ltp/testcases/network/stress/ns-tools/ns-mcast_join.c
ltp/testcases/network/stress/ns-tools/ns-mcast_receiver.c
ltp/testcases/network/stress/ns-tools/ns-tcpserver.c
13) Log Message: getsockopt() takes a socklen_t, not an int, as its optlen
File(s) Affected:
ltp/testcases/network/stress/ns-tools/ns-tcpclient.c
ltp/testcases/network/stress/ns-tools/ns-tcpserver.c
ltp/testcases/network/stress/ns-tools/ns-udpserver.c
14) Log Message: cleanup file
File(s) Affected:
ltp/testcases/kernel/syscalls/gethostid/gethostid01.c
15) Log Message: back out uclinux changes to something that doesnt spit warnings as reported by Randy Dunlap
File(s) Affected:
ltp/testcases/kernel/syscalls/gethostid/gethostid01.c
16) Log Message: fixup gcc warnings by removing silly pieces of code
File(s) Affected:
ltp/testcases/kernel/mem/mtest06/mmap1.c
ltp/testcases/kernel/mem/mtest06/mmap2.c
ltp/testcases/kernel/mem/mtest06/mmap3.c
ltp/testcases/kernel/mem/mtest06/shmat1.c
17) Log Message: Randy Dunlap writes: Convert mmap1 to use standard test results output format. Correct several typos.
File(s) Affected:
ltp/testcases/kernel/mem/mtest06/Makefile
ltp/testcases/kernel/mem/mtest06/mmap1.c
18) Log Message: gcov-kernel: adding gcov-kernel patch for 2.6.22
File(s) Addes:
ltp/utils/analysis/gcov-kernel/linux-2.6.22-gcov-arm-hack.patch
ltp/utils/analysis/gcov-kernel/linux-2.6.22-gcov.patch
19) Log Message: [1754301] Helge Deller writes: mark hppa/parisc as expecting a segv as well
File(s) Affected:
ltp/testcases/kernel/syscalls/mmap/mmap03.c
20) Log Message: Randy Dunlap writes: convert output to match the standard LTP output
File(s) Affected:
ltp/testcases/kernel/fs/linktest/linktest.pl
21) Log Message: close stdout to remove noise
File(s) Affected:
ltp/testcases/kernel/mem/mtest05/dummy.c
22) Log Message: Randy Dunlap writes: Convert mmstress to use the standard results format
File(s) Affected:
ltp/testcases/kernel/mem/mtest05/Makefile
ltp/testcases/kernel/mem/mtest05/mmstress.c
23) Log Message: "rsalveti@linux.vnet.ibm.com" updated the contact information at ltp-howto doc
File(s) Affected:
ltp/doc/ltp-howto.lyx
ltp/doc/ltp-howto.txt
24) Log Message: "rsalveti@linux.vnet.ibm.com" wants to update this with kernel/fs/fsstress/fsstress.c
File(s) Affected:
ltp/testcases/network/nfs/nfs_fsstress/fsstress.c
25) Log Message: "suzuki@in.ibm.com" added SIGNAL and Address Fault handling capability for all architectures
File(s) Affected:
ltp/testcases/kernel/mem/mtest06/mmap1.c
26) Log Message: "rsalveti@linux.vnet.ibm.com" added more options to runltp
File(s) Affected:
ltp/runltp
ltp/doc/man1/pan.1
ltp/pan/pan.c
27) Log Message: Upgrade to Posix Testsuite 1.5.2
File(s) Affected/Added:
ltp/testcases/open_posix_testsuite
28) Log Message: Fixing Proper Freeing of Memory Chunks
File(s) Affected:
ltp/tools/genload/stress.c
Download (MB)
Added: 2007-07-31 License: GPL (GNU General Public License) Price:
818 downloads
JRicochet 2
JRicochet is a simple puzzle game. more>>
JRicochet is a simple puzzle game. It consists of a 10x10 grid, which contains 5 invisible blocks. From each side a player can shoot probes into the grid. Goal is to find the blocks by the pattern of the ricochetting probes in as few shots as possible.
<<less Download (0.54MB)
Added: 2007-06-25 License: GPL (GNU General Public License) Price:
852 downloads
Dynamic Probe Class Library 3.4.3
Dynamic Probe Class Library (DPCL) is an object-based C++ class library. more>>
Dynamic Probe Class Library (DPCL) is an object-based C++ class library that provides the necessary infrastructure to allow tool developers and sophisticated tool users to build parallel and serial tools through technology called dynamic instrumentation.
Dynamic Probe Class Library takes the basic components needed by tool developers and encapsulates them into C++ classes. Each of these classes provide the member functions necessary to interact and dynamically instrument a running application with software patches called probes.
Dynamic instrumentation provides the flexibility for tools to insert probes into applications as the application is running and only where it is needed.
Enhancements:
- This version is a minor update to DPCL that fixes a couple problems that have been reported since the v3.4.2 release
<<lessDynamic Probe Class Library takes the basic components needed by tool developers and encapsulates them into C++ classes. Each of these classes provide the member functions necessary to interact and dynamically instrument a running application with software patches called probes.
Dynamic instrumentation provides the flexibility for tools to insert probes into applications as the application is running and only where it is needed.
Enhancements:
- This version is a minor update to DPCL that fixes a couple problems that have been reported since the v3.4.2 release
Download (2.5MB)
Added: 2006-07-28 License: GPL (GNU General Public License) Price:
1185 downloads
cpufreqd 2.0.0-pre1
cpufreqd is meant to be a replacement of the speedstep applet you can find on some other OS. more>>
cpufreqd is meant to be a replacement of the speedstep applet you can find on some other OS, it monitors battery level, AC state and running programs and adjusts the frequency of the processor according to a set of rules specified in the config file (see cpufreqd.conf (5)).
Installation:
1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system. If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute
`configure itself.
Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.
2. Type `make to compile the package.
3. Optionally, type `make check to run any self-tests that come with the package.
4. Type `make install to install the programs and any data files and documentation.
5. You can remove the program binaries and object files from the source code directory by typing `make clean. To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean. There is
also a `make maintainer-clean target, but that is intended mainly for the packages developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
Enhancements:
- implemented backward compatibility for the configuration file format (great!!)
- automatically load plugins (if not configured) and rely on plugins initialization to probe the necessary stuff
- the configure script now accepts --enable/disable options for plugns that need some sort of special support
- ported the PMU plugin
- added sensors plugin (youll need userspace libs from lm-sensors)
- fixed socket creation permissions
- added the ability to allow a certain group to read/write to the socket
- fixed looots of bugs
- beautified logs
- the "cpu" directive was wrong, now named "cpu_interval" run sed -i -e s/^cpu=/cpu_interval=/ /etc/cpufreqd.conf to fix things.
- reworked plugins post-configuration (might drop it actually), now plugins are correctly initialized even if their global section is missing
<<lessInstallation:
1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system. If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute
`configure itself.
Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.
2. Type `make to compile the package.
3. Optionally, type `make check to run any self-tests that come with the package.
4. Type `make install to install the programs and any data files and documentation.
5. You can remove the program binaries and object files from the source code directory by typing `make clean. To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean. There is
also a `make maintainer-clean target, but that is intended mainly for the packages developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
Enhancements:
- implemented backward compatibility for the configuration file format (great!!)
- automatically load plugins (if not configured) and rely on plugins initialization to probe the necessary stuff
- the configure script now accepts --enable/disable options for plugns that need some sort of special support
- ported the PMU plugin
- added sensors plugin (youll need userspace libs from lm-sensors)
- fixed socket creation permissions
- added the ability to allow a certain group to read/write to the socket
- fixed looots of bugs
- beautified logs
- the "cpu" directive was wrong, now named "cpu_interval" run sed -i -e s/^cpu=/cpu_interval=/ /etc/cpufreqd.conf to fix things.
- reworked plugins post-configuration (might drop it actually), now plugins are correctly initialized even if their global section is missing
Download (0.35MB)
Added: 2005-09-26 License: GPL (GNU General Public License) Price:
1488 downloads
LooperNG 1.3
LooperNG is an intelligent event routing daemon. more>>
LooperNG is an intelligent event routing daemon. Primarily used for Network Management, this application can be used to accomplish a variety of tasks related to logging and alerting.
It is a modularised, rules-based event routing system that is flexible and easy to use. It is primarily deployed by network / security management groups as a central event gateway or an SNMP trap collection and forwarding station.
LooperNG events can be in the form of SNMP traps, Syslog Alerts, lines in a Log File, Sockets etc. Events can be received and generated such that an event can arrive in one form (e.g., SNMP) and forwarded in another form (e.g., Syslog). LooperNG can also receive events from systems like Nagios, Snort, Mon etc. and forward to other systems like a MySQL database, Netcool/OMNIbus, or just send an e-mail. Modules for new types of events can be easily written.
LooperNG was designed to improve on some of the limitations Looper (muthanna.com/looper). It is built completely from scratch with a cleaner more scalable architecture and is based on the Perl language.
Main features:
- SNMP Trap forwarding, exploding and rewriting (enhancing).
- Event generation for demos, debugging, troubleshooting etc.
- Event Enrichment and Escalation.
- Intelligent routing, rerouting and processing of events and alerts.
- Monitoring logfiles, syslog events, intrusion events etc.
- Forwarding alert history to databases, logfiles etc.
- Used as ad-hoc Netcool Probes.
- Used to replace HP Openview NNMs trap collection features.
- Centralize alerts in a LooperDB database.
<<lessIt is a modularised, rules-based event routing system that is flexible and easy to use. It is primarily deployed by network / security management groups as a central event gateway or an SNMP trap collection and forwarding station.
LooperNG events can be in the form of SNMP traps, Syslog Alerts, lines in a Log File, Sockets etc. Events can be received and generated such that an event can arrive in one form (e.g., SNMP) and forwarded in another form (e.g., Syslog). LooperNG can also receive events from systems like Nagios, Snort, Mon etc. and forward to other systems like a MySQL database, Netcool/OMNIbus, or just send an e-mail. Modules for new types of events can be easily written.
LooperNG was designed to improve on some of the limitations Looper (muthanna.com/looper). It is built completely from scratch with a cleaner more scalable architecture and is based on the Perl language.
Main features:
- SNMP Trap forwarding, exploding and rewriting (enhancing).
- Event generation for demos, debugging, troubleshooting etc.
- Event Enrichment and Escalation.
- Intelligent routing, rerouting and processing of events and alerts.
- Monitoring logfiles, syslog events, intrusion events etc.
- Forwarding alert history to databases, logfiles etc.
- Used as ad-hoc Netcool Probes.
- Used to replace HP Openview NNMs trap collection features.
- Centralize alerts in a LooperDB database.
Download (1.7MB)
Added: 2006-07-04 License: GPL (GNU General Public License) Price:
1211 downloads
autonet 0.5.0
autonet looks up existing network configuration files and probes the network. more>>
autonet.py is a small application which looks up existing network configuration files, probes the network with arping in order to determine if it can connect and ideally set up a working internet connection and routing.
If no internet connection is available, autonet.py will parse each configuration file, extract different network setups and probe if the network environment works with this configuration.
The probing is done with arping. A bogus IP 0.0.0.0 is used in order to get the network interface up. Then autonet.py tries to arping the gateway.
If the gateway responds the configuration is considered good. At this point there is no routing, so only hosts within the subnet defined in the configuration is used.
If none of the gateways in the configuration works, the probe gets more brutal by just setting up the network interface according to the configuration file, and and ping the gateway. Again, no routes yet.
If a configuration is considered working (gateway is pingable), the route is set as described in the configuration file. An internet connection should be established then.
This is also checked by pinging k.root-servers.org (as default, override with --testhost), use an IP address here, as DNS is not handled by autonet (yet?).
There is a special feature in autonet.py for owners of some models of Asus notebooks. The package contains a module which uses two LEDs of the laptop to show activity.
While searching and probing, the blue LED is flashing, if a working configuration is found the orange LED flickers for a second. Also this will only work if you have the asus module in your kernel, and it has *not* widely been tested. Have a look at Asus.py for details.
Some common vars can be edited in autonet.py, such as locations of required programs and some common settings (of which timeout does not even work yet) but in most cases supplying reasonable commandline arguments should be sufficient.
As Gentoo has slightly different settings, there are two scripts for Gentoo users, to make integration into the Gentoo init system easier.
<<lessIf no internet connection is available, autonet.py will parse each configuration file, extract different network setups and probe if the network environment works with this configuration.
The probing is done with arping. A bogus IP 0.0.0.0 is used in order to get the network interface up. Then autonet.py tries to arping the gateway.
If the gateway responds the configuration is considered good. At this point there is no routing, so only hosts within the subnet defined in the configuration is used.
If none of the gateways in the configuration works, the probe gets more brutal by just setting up the network interface according to the configuration file, and and ping the gateway. Again, no routes yet.
If a configuration is considered working (gateway is pingable), the route is set as described in the configuration file. An internet connection should be established then.
This is also checked by pinging k.root-servers.org (as default, override with --testhost), use an IP address here, as DNS is not handled by autonet (yet?).
There is a special feature in autonet.py for owners of some models of Asus notebooks. The package contains a module which uses two LEDs of the laptop to show activity.
While searching and probing, the blue LED is flashing, if a working configuration is found the orange LED flickers for a second. Also this will only work if you have the asus module in your kernel, and it has *not* widely been tested. Have a look at Asus.py for details.
Some common vars can be edited in autonet.py, such as locations of required programs and some common settings (of which timeout does not even work yet) but in most cases supplying reasonable commandline arguments should be sufficient.
As Gentoo has slightly different settings, there are two scripts for Gentoo users, to make integration into the Gentoo init system easier.
Download (0.075MB)
Added: 2005-09-19 License: GPL (GNU General Public License) Price:
1509 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above to probe search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
