Free thin layer chromatography chemistry software for linux

RogueScanner project is an open-source vulnerability management tool that is used to gain greater network visibility to enable you to quickly identify and remove rogue wireless devices that may provide a back door to access your critical data and infrastructure.
Considering that rogue access points and peers represent a major threat to data integrity, RogueScanner is a valuable tool that you can start using today at no cost.
More than 300 companies manufacture access points, and there are more than 10,000 different models of network infrastructure.
Companies thus face a major challenge in maintaining a system to track and identify all potential rogue wireless devices and in continually scanning the network to identify them. To address this challenge, Network Chemistry has made an open-source product available to help organizations begin to immediately scan their networks.
RogueScanner is available for use at no charge by organizations looking for a tool focused on device identification and rogue detection. RogueScanner leverages the Collaborative Device Classification system to automatically lookup and identify the device type and its identity in real time.
Enhancements:
- Many scanning and classification improvements.
- Support has been added for parsing routes under from IOS CLI.
- Support has been added for dumping Cisco device CDP cache via both SNMP and CLI (IOS and CatOS).
- Support has been added for sniffing CDP broadcasts off the wire.
- CDP information is now submitted to the classification server and used for classification.
- FTP (21/TCP) has been added to the list of ports that are probed if open.

GNU Transport Layer Security Library is a library which implements a secure layer over a reliable transport layer such as TCP/IP. GNU Transport Layer Security Library implements the TLS 1.0 and SSL 3.0 protocols, accompanied with authentication methods such as X.509, OpenPGP, and SRP.
Main features:
- Support for TLS 1.1 and SSL 3.0 protocols
- Support for TLS extensions
- Support for authentication using the SRP protocol
- Support for authentication using both X.509 certificates
- and OpenPGP keys Support for X.509 and OpenPGP certificate handling.
- Supports all the strong encryption algorithms
- Supports compression
- Runs on most Unix platforms
Enhancements:
- Support for Proxy Certificates as per RFC 3820 were added.
- The --generate-proxy option was added to certtool.
- certtool --certificate-info now prints information for Proxy Certificates.
- New APIs were added to set proxy subject names and get or set a proxy cert extension.
- Parsing of pathLenConstraints in BasicConstraints with missing CA was fixed.
- A self-test was added to test for regressions of pathLenConstraint.
- Certtool now prints times in UTC when printing certificate/CRL info.
- Importing of ASCII armored OpenPGP keys was fixed.

TAHI Test Suite provides a mechanism for validating an IPv6 implementation against a standardized test for conformance to the IPv6 specification, extensions and directly related protocols.
Enhancements:
- Ported FreeBSD-4.x
- Dont support FreeBSD 2.x
- pa can decode MIP6 packets
- All interoperability test tools is included.

Thin SFTP Applet is a full featured Secure File Transfer Program. Thin SFTP Applet can be use for secure file transfer and management and can be easily integrated into your website or web application.
You can use our SFTP applet to carry out recursive folder uploads and downloads, with entire directory trees being transfered in a single click.
Interrupted transfers can be resumed. Unlike the FTP protocol, with SFTP all data and commands are encrypted for maximum security.
In spite of being a web client, its appearence is no different from a traditional 2-Table File Transfer Program for desktops.
Because the client is an applet it does not need to refresh itself each time a file transfer or any other operation takes place. The result is that the user experience is no different from using a desktop client.
Enhancements:
- A minor bug related to connection pooling and reuse was fixed.

Object Relational Membrane is a Python package that provides the functionality of an object relational layer like EJB or other persistence storage systems.
Object Relational Membrane is a thin compatibility layer between SQL table layouts and Object Oriented Python. While providing a good deal of functionality, it tries to be as small and simple as possible. It currently works with PostgreSQL and Gadfly.
Adapters for Firebird and MySQL are planed.
Enhancements:
- A number of small changes and enhancements.
- The last release previous to a "beta" release.

Chemistry::SQL is an access database functions module.

SYNOPSIS

use strict;
use Chemistry::SQL;
use Chemistry::Artificial::SQL;

my $db_name = $ARGV[0];
my $file = $ARGV[1];

my $db1 = Chemistry::SQL::new(db_host=>"127.0.0.1",db_user=>"root",db_port=>"3306",db_pwd=>"",
db_name=>$db_name,db_driver=>"mysql");
if ($db1->db_exist)
{ $db1->connect_db;
$db1->del_tables;
$db1->create_tables_mysql;
$db1->inscomp_from_file("$file");
}
else
{
$db1->create_db;
$db1->connect_db;
$db1->create_tables_mysql;
$db1->inscomp_from_file("$file");
}
# Reaction Insertion

my $qart = Chemistry::Artificial::SQL::new($db1);
my $qr =$qart->q_reaccion(C=CC=C.C=C>>C1=CCCCC1,smiles);
$db1->reactionsert($qr,"","0");

This package provides the necessary functions to interact with the database. The methods implemented in this module are oriented to give users control of the database without knowing how to use SQL queries.

Database Independent Abstraction Layer for C (libdbi) implements a database-independent abstraction layer in C, similar to the DBI/DBD layer in Perl.
Writing one generic set of code, programmers can leverage the power of multiple databases and multiple simultaneous database connections by using this framework.
Main features:
Database-level abstraction:
Your programs dont need to deal with the arbitrary interfaces and oddities of each database library. libdbi handles all the details for you, you just tell it what you want the database to do.
Modularity:
Since database code written with libdbi is not tied to one specific database server, you can effortlessly switch databases or give your users the option to specify their own database settings.
Clean interface:
With ample documentation describing libdbi and its well thought out object-oriented design, programming with libdbi should be less painful than programming with native database libraries. And you only need to learn it once instead of learning each database librarys syntax.
Accommodates coder apathy:
libdbi is written to do The Right Thing(tm), not just some quick hack that does the job in a half-assed fashion. This saves tons of your $100/hour time from debugging, so that you can mess around having fun during the hours that clients are paying you to debug. It also strives to reduce the worldwide crisis of carpal tunnel syndrome, so it uses constructs such as this one to pack multiple function calls into one line, saving you the bother of typing more than you have to:
dbi_result_get_fields(result, "id.%i firstname.%s lastname.%s fractional_value.%f", &id, &firstname, &lastname, &floatval);
Driver interface:
The dynamic linking used by libdbi allows for driver authors to license their drivers however they please - they are not restricted to the GPL or LGPL. Drivers are easy to write, and require no special installation.
Error handling:
Instead of checking every single database call for errors, libdbi gives programmers the option of registering an error handler callback, similar to a signal handler. Because we know youll "forget" to check for errors otherwise :)
Convenience:
Spend your time writing clever code, not reinventing the wheel with your own single-use, #define-abusing, less featureful database interface.
libdbi implements a database-independent abstraction layer in C, similar to the DBI/DBD layer in Perl. Writing one generic set of code, programmers can leverage the power of multiple databases and multiple simultaneous database connections by using this framework.
The libdbi-drivers project maintains drivers for libdbi. Drivers are distributed seperately from the library itself.
There are currently drivers for MySQL, PostgreSQL, SQLite, and mSQL. More are on the way.
Enhancements:
- Support for a timezone suffix in time and date types was added.
- Error handling and error reporting were vastly improved.
- Some memory leaks were fixed.

PHP MySQL Database Layer Class is a php class providing some very useful methods to work with a mySQL database.
Main features:
- connects you to a mySQL host and select a database in a single call (opposed to PHPs native functions which requires two steps)
- has a "query" method that has the same role as PHPs mysql_query but this one will tell you about the affected rows (through the "affectedRows" property) when executing an INSERT, UPDATE, DELETE query and about the found rows (through the "foundRows" property) when executing a SELECT query - the "foundRows" property tells you how many records would the query return if there was no LIMIT applied to it - very useful when creating listing so you dont have to do a query to determine how many records you have in a database and the again a query to show only the records from a page
- has an "escape_string" method that will "mysql_real_escape_string" your string weather the magic_quotes are on or not
- has a "dlookup" method that i am sure you will find VERY useful once you get to know it: it return data from a single table cell based on standard mySQL WHERE criteria - see the manual for detailed info! (yes, it acts exactly like the function with the same name from microsft access)
- provides you with a very useful debug interface which shows you each query your script is running, for how long, the total number of queries made, the total execution time of your queries, errors of your queries and what are the values of $_GET, $_POST, $_COOKIES and $_SERVER superglobal variables. The debug interface is template driven and supports localisation.
- it will notify you if a specific query is executed more than once and will advise you to optimize the script
- you can instruct it to send you an email if a query runs longer then a specified time
- the code is heavily documented so you can easily understand every aspect of it and even maybe use it as a php tutorial
Enhancements:
- the state of $_FILES and $_SESSION superglobals are now also shown in the debug window
- better integration with XTemplate (previously, there was a variable assigned to each entry in the language file now the XTemplates feature to handle arrays is used)
- properties will now have default values in PHP 4