Free texas software for linux

TiEmu is an emulator of Texas Instruments hand-helds (TI89/92/92+/V200). TiEmu is full-featured with a graphical debugger.
Main features:
- support TI89, TI89 Titanium, TI92, TI92+ and V200PLT hand-helds
- full-featured graphical debugger (source, memory, breakpoints, traps, vectors, stack, trace, ...)
- debugger supports : run, step in, step over, step out, run to cursor
- ability to load/save the emulator state
- file linkport emulation (direct loading of files)
- works with 1/2/4 MB ROMs, 128 or 256 KB RAM
- emulate HW1, HW2, and HW3
- can run from ROM dumps or FLASH upgrades
- automatic ROM version/model detection
- constrast emulated (try [Alt] + [+] & [-])
- pretty fast emulation engine
- sreenshot of LCD and/or calculator in several images format (JPG/PNG/ICO)
- TI keyboard useable directly from PC keyboard or with the mouse on the skin
- archive memory support as well as ghost spaces
- full emulation of HW1/2/3 protection (stealth I/O)
- no buggy MC68000 SR & nbcd (TiEmu cant be detected as VTi : you have true emulation)
- 4-level and 7/8-level grayscale support (thx Kevin !) for both HW1 and HW2/3
- the letter keys are aliased to produce their respective letters. No need to press the Alpha key, just type (TI89).
- keyboard mapping and menu shortcuts are fully VTi-compatible
- keyboard mapping can be customized thru keymaps files
Version restrictions:
- linkport emulation has not been tested with USB cable yet
- no debugger while sending/receiving a file to/from the virtual calculator
- no linkport logging capabilities yet

smtpfilter is a filter for an SMTP session which passes the session through transparently in real time, except for the DATA command which is intercepted in order to scan the data for spam and/or viruses with the scanner of your choice.

If you are reading this source, it is what should have been an internal release and consequently has a few comments at the head of the file which would not normally be here. Most likely I must have released this in a hurry because someone needed some
recent feature that has been added, before I had time to do a periodic code review and tidy-up. If this is your first time looking at or installing this code you should probably get in
touch with the author (gtoal@gtoal.com) and ask for a cleaner version before you start.

The descriptive comments which explain what this program does, and how, have slowly migrated from being at the top of the file to being lost half way down. That is something which will be done in the next maintenance release.

But this version *does* work, and works very well now. It is in service at the University of Texas Pan American, with 2000 staff and 15,000 students (although not all of those are active emailers -maybe only 2000-3000 are in heavy use. It sometimes looks like
AOL and MSN and Yahoo are the official campus mailers.

I Hear U is a Voice over IP (VoIP) application for Linux and it creates an audio stream between two computers in the easiest way and with the minimal traffic on the network.
I Hear U major features:
- Peer-to-Peer: the communication takes place between two computers without need of other servers and protocols in the middle.
- UDP/TCP support: IHU supports both UDP and TCP, with the possibility to choose UDP, for fast and easy connections, or TCP, if its the only solution when your computer is behind firewall or NAT.
- Good audio performance: IHU was born to give the best audio performance, low latency above all. For this purpose IHU is compatible with ALSA, now the default Linux sound architecture, but also with JACK, a low latency sound server. For the audio compression, IHU uses Speex, a codec optimized for speech (and completely free and open source).
- Crypted stream: you have also the possibility to crypt the stream using a fast hybrid cryptographic system (RSA + Blowfish)
- Command-line support: the GUI is not strictly necessary, you can run also a textual IHU from command-line (for example if you need to run the program on remote computers).
- Free and Open Source: IHU is totally free and distributed under the terms of GNU General Public License
The possibilities of use of IHU are infinite, for example you can use it like a phone to talk with your friends all around the world, or at home/work, to talk between computers in the LAN, etc., use it just as your phantasy suggests.
Main features:
- feature improved: ring volume adjustable
- bugfix: mute playback when seeking files
- source code: updated to speex 1.1.11
Enhancements:
- new feature: added possibility to convert IHU files to SPX file
- feature improved: quickly change port in the Receiver address using :
- feature improved: Defaults button in settings now affects only current tab
- feature improved: Volume Change speed for AGC changed to slider in the GUI
- bug fixed: TX dump file was closed after first call
- bug fixed: problems when playing files with different Speex modes
- bug fixed: conflict in the GUI when wating for calls and playing files
- source code: clear distinction in the use of h and hpp header

Real Poker project is a poker simulation.

New poker games may be created by the user. Hand simulations may be run.

Upon execution the first thing that is displayed is the main window for Real Poker.

Poker games may be created, saved, deleted, and edited. Poker games may also be filtered through a learning process, the results of which are used by the robot players.

There is a game library provided with Real Poker "out of the box" which includes four poker games: Seven Card Stud, Five Card Stud, Texas Holdem, and Five Card Draw. The game library file is named "games.lib".

A game library may contain a maximum of 50 games. When Real Poker is first loaded, the default game library (games.lib) will automatically be loaded provided it is present in the .RP directory within your HOME directory (see the INSTALL file).

Use your mouse to click on the GAME LIBRARY drop-down item under the MISC menu selection to perform various functions concerning the game library.

WWW::YahooMaps is a Perl module which can create links to Yahoo! Maps.

SYNOPSIS

use WWW::YahooMaps;

#first method: PASSING ADDRESS BIT-BY-BIT
my %addr = (
"street" => "555 N Michigan Ave",
"city" => "Chicago, IL 60611",
"country" => "us",
);

if (my $url = WWW::YahooMaps::hashreftolink(%addr)){
print "url1 $urln";
}

#second method: ADDRESS INFO IN STRING
#separators can be ";" or newline "n"
#street should come before city
#pass an additional 1 at the end if you want to pass city first
if (my $url = WWW::YahooMaps::stringtolink("us","us","101 Morris Street; Sebastopol, CA 95472")){
print "url2 $urln";
}

#third method: CALL A FUNCTION WITH BIT-BY-BIT PARAMETERS
if (my $url = WWW::YahooMaps::stringtolink("us","us","Paris, TX; Main Street", 1)){
print "url3 $urln";
}

GENRIP is a kernel driver (presently for Linux only) that enables you to carry ethernet frames over generic low-speed/low-power serial radios, such as Microhards MHX series radios. It is intended to speed up the development cycle for those creating low-powered Embedded telemetry and SCADA devices, but may have other applications as well. Once installed, the serial radio simply appears as a network interface like this:

[root@lindev]# ./ifconfig gr0
gr0 Link encap:Generic Radio IP HWaddr 00:00:02:04:06:08
inet addr:192.168.15.1 Mask:255.255.255.0
UP RUNNING MTU:234 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:30
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

GENRIP was originally based upon Stuart Cheshires STRIP driver, which is part of the Mobile Computing Group at Stanford Universitys Mosquitonet project. It has been radically modified since.

GENRIP was ported to this application by Lawrence Wimble of Design On Demand, Inc. Design On Demand, Inc. maintains GENRIP and hopes that youll call them if you need help with an embedded project using GENRIP (or any embedded project for that matter).

GENRIP is released for Linux under the GPL. A port to FreeBSD is planned in the near future.

HTML::FormatNroff is a Perl module that can format HTML as nroff man page.

SYNOPSIS

require HTML::FormatNroff;
$html = parse_htmlfile("test.html");
$format_nroff = new HTML::FormatNroff(name => trial,
project => MyProject);
print $formatter->format($html);

The HTML::FormatNroff is a formatter that outputs nroff source for the nroff text processor, using man macros, and tbl commands for table processing.

The result of using the formatter must be processed as follows, when directing output to the screen (assume output is in the file "text.nroff"):

tbl -TX text.nroff | nroff -man | col

If the output is to be printed, on an laser printer for example, a command similar to the following must be used:

tbl -TX text.nroff | nroff -man -Tlj | lpr

Meta tags may be placed in the HTML so that portions of the HTML will be ignored and not processed. Content between the tags

< META NAME="nroff-control" CONTENT="ignore_start" >
< META NAME="nroff-control" CONTENT="ignore_end" >

will be ignored. In the BODY META is not supported, but DIV may be used as follows:

< DIV TYPE="NROFF_IGNORE" >
< /DIV >

In both the META and DIV uses, case is ignored.