Free tbs sports software for linux

SportsTracker is an application for people which want to record their sporting activities. SportsTracker is not bound to a specific kind of sport, the user can create categories for all sport types which are endurance related, such as cycling, running or swimming.

The main advantage is a good overview of your exercises and you can easily create diagrams and statistics for specific time ranges and sport types.

If you own a heartrate monitor with a computer interface you can organize the recorded exercise files by attaching them to the exercise entries and view them on demand. You can also import the data from the exercise files. Users of a Polar device should install PolarViewer for this feature.

All the application data is stored in XML files. So it should be easy to access it with other tools or to write importers and exporters for other applications.

NATting SOHO firewall is a firewall script for iptables.

# Model NATting SOHO firewall for SP article
# by Jay Beale (jay@bastille-linux.org)
#
# Warning: youre going to have to hack this for your own purposes.
#

# Assumptions:
# your internal network is 192.168.1.0/24 on eth1
# your internet IP is 10.0.0.1 on eth0
# your internal network IP on eth1 is 192.168.1.1
#
# Additonally:
# you have another internal network, a DMZ: 192.168.2.0/24 on eth2

$INTERNAL_IP = 192.168.1.1
$INTERNAL_NET = 192.168.1.0/24

$INTERNET = 10.0.0.1

$DMZ = 192.168.2.0/24

# Insert the required kernel modules
modprobe iptable_nat
modprobe ip_conntrack
modprobe ip_conntrack_ftp

# Set default policies for packets going through this firewall box

iptables -t nat -P PREROUTING DROP
iptables -t nat -P POSTROUTING DROP
iptables -P FORWARD DROP

# Set default policies for packet entering this box

iptables -P OUTPUT ALLOW
iptables -P INPUT ALLOW

# Kill spoofed packets

for f in /proc/sys/net/ipv4/conf/*/rp_filter; do
echo 1 > $f
done

# Anything coming from our internal network should have only our addresses!
iptables -A FORWARD -i eth1 -s ! $INTERNAL_NET -j DROP

# Anything coming from the Internet should have a real Internet address
iptables -A FORWARD -i eth0 -s 192.168.0.0/16 -j DROP
iptables -A FORWARD -i eth0 -s 172.16.0.0/12 -j DROP
iptables -A FORWARD -i eth0 -s 10.0.0.0/8 -j DROP

# Note:There are more "reserved" networks, but these are the classical ones.

# Block outgoing network filesharing protocols that arent designed
# to leave the LAN

# SMB / Windows filesharing
iptables -A FORWARD -p tcp --sport 137:139 -j DROP
iptables -A FORWARD -p udp --sport 137:139 -j DROP
# NFS Mount Service (TCP/UDP 635)
iptables -A FORWARD -p tcp --sport 635 -j DROP
iptables -A FORWARD -p udp --sport 635 -j DROP
# NFS (TCP/UDP 2049)
iptables -A FORWARD -p tcp --sport 2049 -j DROP
iptables -A FORWARD -p udp --sport 2049 -j DROP
# Portmapper (TCP/UDP 111)
iptables -A FORWARD -p tcp --sport 111 -j DROP
iptables -A FORWARD -p udp --sport 111 -j DROP

# Block incoming syslog, lpr, rsh, rexec...
iptables -A FORWARD -i eth0 -p udp --dport syslog -j DROP
iptables -A FORWARD -i eth0 -p tcp --dport 515 -j DROP
iptables -A FORWARD -i eth0 -p tcp --dport 514 -j DROP
iptables -A FORWARD -i eth0 -p tcp --dport 512 -j DROP

###
# Transparently proxy all web-surfing through Squid box

$SQUID = 192.168.1.2:8080
$SQUIDSSL = 192.168.1.2:443
iptables -t nat -A PREROUTING -i eth1 -tcp --dport 80 -j DNAT --to $SQUID
iptables -t nat -A PREROUTING -i eth1 -tcp --dport 443 -j DNAT --to $SQUIDSSL

# Transparently forward all outgoing mail to a relay host

$SMTP = 192.168.1.3
iptables -t nat -A PREROUTING -i eth1 -tcp --dport 25 -j DNAT --to $SMTP

# Transparently redirect web connections from outside to the DMZ web
# server

$DMZ_WEB = 192.168.2.2
iptables -t nat -A PREROUTING -i eth0 -d 192.168.1.1 -dport 80 -j DNAT --to $DMZ_WEB

# Source NAT to get Internet traffic through
iptables -t nat -A POSTROUTING -o eth1 -j SNAT --to $INTERNET


# Activate the forwarding!
echo 1 >/proc/sys/net/ipv4/ip_forward

Lewin Pongs is an advanced game of pong.

An advanced game of pong with lots of options. A ball bounces around the screen and you hit it with paddles.

If you miss, your opponent scores, if your opponent misses, you score.

PONG, an adaptation of table tennis to the video screen, was the first commercially successful video game and is widely regarded as ushering in the video game era.

PONG was released by Atari on November 29, 1972.

PONG is a basic simulation of the racket sport of table tennis. A small square representing a ping pong ball travels across the screen in a linear trajectory. If the square strikes the perimeter of the playing field, or one of the simulated paddles, the square ricochets based on the angle of the impact.

Game play consists of players moving their respective paddles vertically to defend their scoring zones. Players score one point by maneuvering the square past their opponents paddle.

PONG can be played either by a single player pitted against a computerized opponent, or by two players each controlling a paddle. In Ataris original PONG arcade cabinets, players controlled their paddles using one of two small paddle controllers (a knob-like input device). Contrastingly, several of the derivative table tennis simulations employed longitudinally-sliding joysticks.

NAT iptables firewall script is an iptables firewall script.

This script is meant to be run once per boot the rules will be double added if you try to run it twice if you need to add another rule during runtime, change the -A to a -I to add it to the top of the list of rules if you use -A it will go at the end after the reject rule.

Sample:

# interface definitions
BAD_IFACE=eth0

DMZ_IFACE=eth1
DMZ_ADDR=x.x.x.96/28

GOOD_IFACE=eth2
GOOD_ADDR=192.168.1.0/24

MASQ_SERVER=x.x.x.98
FTP_SERVER=x.x.x.100
MAIL_SERVER=x.x.x.99
MAIL_SERVER_INTERNAL=192.168.1.3

# testing
#set -x

ip route del x.x.x.96/28 dev $BAD_IFACE
ip route del x.x.x.96/28 dev $DMZ_IFACE
ip route add x.x.x.97 dev $BAD_IFACE
ip route add x.x.x.96/28 dev $DMZ_IFACE

# we need proxy arp for the dmz network
echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp
echo 1 > /proc/sys/net/ipv4/conf/eth1/proxy_arp

# turn on ip forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward

# turn on antispoofing protection
for f in /proc/sys/net/ipv4/conf/*/rp_filter; do echo 1 > $f; done

# flush all rules in the filter table
#iptables -F

# flush built in rules
iptables -F INPUT
iptables -F OUTPUT
iptables -F FORWARD

# deny everything for now
iptables -A INPUT -j DROP
iptables -A FORWARD -j DROP
iptables -A OUTPUT -j DROP

# make the chains to define packet directions
# bad is the internet, dmz is our dmz, good is our masqed network
iptables -N good-dmz
iptables -N bad-dmz
iptables -N good-bad
iptables -N dmz-good
iptables -N dmz-bad
iptables -N bad-good

iptables -N icmp-acc

# accept related packets
iptables -A FORWARD -m state --state INVALID -j DROP
iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT

# internal client masqing
iptables -t nat -A POSTROUTING -s $GOOD_ADDR -o $BAD_IFACE -j SNAT --to $MASQ_SERVER
# mail server masqing
iptables -t nat -A PREROUTING -p tcp -d $MAIL_SERVER --dport smtp -j DNAT --to $MAIL_SERVER_INTERNAL:25
iptables -t nat -A PREROUTING -p tcp -d $MAIL_SERVER --dport http -j DNAT --to $MAIL_SERVER_INTERNAL:80
iptables -t nat -A PREROUTING -p tcp -d $MAIL_SERVER --dport https -j DNAT --to $MAIL_SERVER_INTERNAL:443
# to allow the above to work you need something like
# iptables -A bad-good -p tcp --dport smtp -d $MAIL_SERVER_INTERNAL -j ACCEPT

# set which addresses jump to which chains
iptables -A FORWARD -s $GOOD_ADDR -o $DMZ_IFACE -j good-dmz
iptables -A FORWARD -s $GOOD_ADDR -o $BAD_IFACE -j good-bad

iptables -A FORWARD -s $DMZ_ADDR -i $DMZ_IFACE -o $BAD_IFACE -j dmz-bad
iptables -A FORWARD -s $DMZ_ADDR -i $DMZ_IFACE -o $GOOD_IFACE -j dmz-good

iptables -A FORWARD -o $DMZ_IFACE -j bad-dmz
iptables -A FORWARD -o $GOOD_IFACE -j bad-good

# drop anything that doesnt fit these
iptables -A FORWARD -j LOG --log-prefix "chain-jump "
iptables -A FORWARD -j DROP

# icmp acceptance
iptables -A icmp-acc -p icmp --icmp-type destination-unreachable -j ACCEPT
iptables -A icmp-acc -p icmp --icmp-type source-quench -j ACCEPT
iptables -A icmp-acc -p icmp --icmp-type time-exceeded -j ACCEPT
iptables -A icmp-acc -p icmp --icmp-type echo-request -j ACCEPT
iptables -A icmp-acc -p icmp --icmp-type echo-reply -j ACCEPT
# iptables -A icmp-acc -j LOG --log-prefix "icmp-acc "
iptables -A icmp-acc -j DROP

# from internal to dmz
iptables -A good-dmz -p tcp --dport smtp -j ACCEPT
iptables -A good-dmz -p tcp --dport pop3 -j ACCEPT
iptables -A good-dmz -p udp --dport domain -j ACCEPT
iptables -A good-dmz -p tcp --dport domain -j ACCEPT
iptables -A good-dmz -p tcp --dport www -j ACCEPT
iptables -A good-dmz -p tcp --dport https -j ACCEPT
iptables -A good-dmz -p tcp --dport ssh -j ACCEPT
iptables -A good-dmz -p tcp --dport telnet -j ACCEPT
iptables -A good-dmz -p tcp --dport auth -j ACCEPT
iptables -A good-dmz -p tcp --dport ftp -j ACCEPT
iptables -A good-dmz -p tcp --dport 1521 -j ACCEPT
iptables -A good-dmz -p icmp -j icmp-acc
iptables -A good-dmz -j LOG --log-prefix "good-dmz "
iptables -A good-dmz -j DROP

# from external to dmz
iptables -A bad-dmz -p tcp --dport smtp -j ACCEPT
iptables -A bad-dmz -p udp --dport domain -j ACCEPT
iptables -A bad-dmz -p tcp --dport domain -j ACCEPT
iptables -A bad-dmz -p tcp --dport www -j ACCEPT
iptables -A bad-dmz -p tcp --dport https -j ACCEPT
iptables -A bad-dmz -p tcp --dport ssh -j ACCEPT
iptables -A bad-dmz -p tcp -d $FTP_SERVER --dport ftp -j ACCEPT
iptables -A bad-dmz -p icmp -j icmp-acc
iptables -A bad-dmz -j LOG --log-prefix "bad-dmz "
iptables -A bad-dmz -j DROP

# from internal to external
iptables -A good-bad -j ACCEPT
# iptables -t nat -A POSTROUTING -o $BAD_IFACE -j SNAT --to $MASQ_SERVER
#iptables -A good-bad -p tcp -j MASQ
#iptables -A good-bad -p udp -j MASQ
#iptables -A good-bad -p icmp -j MASQ
#ipchains -A good-bad -p tcp --dport www -j MASQ
#ipchains -A good-bad -p tcp --dport ssh -j MASQ
#ipchains -A good-bad -p udp --dport 33434:33500 -j MASQ
#ipchains -A good-bad -p tcp --dport ftp -j MASQ
#ipchains -A good-bad -p icmp --icmp-type ping -j MASQ
#ipchains -A good-bad -j REJECT -l

# from dmz to internal
# iptables -A dmz-good -p tcp ! --syn --sport smtp -j ACCEPT
iptables -A dmz-good -p tcp --dport smtp -j ACCEPT
iptables -A dmz-good -p tcp --sport smtp -j ACCEPT
iptables -A dmz-good -p udp --sport domain -j ACCEPT
iptables -A dmz-good -p tcp ! --syn --sport domain -j ACCEPT
iptables -A dmz-good -p tcp ! --syn --sport www -j ACCEPT
iptables -A dmz-good -p tcp ! --syn --sport ssh -j ACCEPT
iptables -A dmz-good -p tcp -d 192.168.1.34 --dport smtp -j ACCEPT
iptables -A dmz-good -p icmp -j icmp-acc
iptables -A dmz-good -j LOG --log-prefix "dmz-good "
iptables -A dmz-good -j DROP

# from dmz to external
iptables -A dmz-bad -p tcp --dport smtp -j ACCEPT
iptables -A dmz-bad -p tcp --sport smtp -j ACCEPT
iptables -A dmz-bad -p udp --dport domain -j ACCEPT
iptables -A dmz-bad -p tcp --dport domain -j ACCEPT
iptables -A dmz-bad -p tcp --dport www -j ACCEPT
iptables -A dmz-bad -p tcp --dport https -j ACCEPT
iptables -A dmz-bad -p tcp --dport ssh -j ACCEPT
iptables -A dmz-bad -p tcp --dport ftp -j ACCEPT
iptables -A dmz-bad -p tcp --dport whois -j ACCEPT
iptables -A dmz-bad -p tcp --dport telnet -j ACCEPT
iptables -A dmz-bad -p udp --dport ntp -j ACCEPT
# ipchains -A good-bad -p udp --dport 33434:33500 -j MASQ
iptables -A dmz-bad -p icmp -j icmp-acc
iptables -A dmz-bad -j LOG --log-prefix "dmz-bad "
iptables -A dmz-bad -j DROP

# from external to internal
iptables -A bad-good -p tcp --dport smtp -d $MAIL_SERVER_INTERNAL -j ACCEPT
iptables -A bad-good -p tcp --dport http -d $MAIL_SERVER_INTERNAL -j ACCEPT
iptables -A bad-good -p tcp --dport https -d $MAIL_SERVER_INTERNAL -j ACCEPT
iptables -A bad-good -j LOG --log-prefix "bad-good "
iptables -A bad-good -j REJECT

# rules for this machine itself
iptables -N bad-if
iptables -N dmz-if
iptables -N good-if

# set up the jumps to each chain
iptables -A INPUT -i $BAD_IFACE -j bad-if
iptables -A INPUT -i $DMZ_IFACE -j dmz-if
iptables -A INPUT -i $GOOD_IFACE -j good-if

# external iface
iptables -A bad-if -p icmp -j icmp-acc
iptables -A bad-if -j ACCEPT
#ipchains -A bad-if -i ! ppp0 -j DENY -l
#ipchains -A bad-if -p TCP --dport 61000:65095 -j ACCEPT
#ipchains -A bad-if -p UDP --dport 61000:65095 -j ACCEPT
#ipchains -A bad-if -p ICMP --icmp-type pong -j ACCEPT
#ipchains -A bad-if -j icmp-acc
#ipchains -A bad-if -j DENY

# dmz iface
iptables -A bad-if -p icmp -j icmp-acc
iptables -A dmz-if -j ACCEPT

# internal iface
iptables -A good-if -p tcp --dport ssh -j ACCEPT
iptables -A good-if -p ICMP --icmp-type ping -j ACCEPT
iptables -A good-if -p ICMP --icmp-type pong -j ACCEPT
iptables -A good-if -j icmp-acc
iptables -A good-if -j DROP


# remove the complete blocks
iptables -D INPUT 1
iptables -D FORWARD 1
iptables -D OUTPUT 1

Hot Potato Online is a fast paced arena sport game where players try to explode the opposition using a short-fused potato bomb. Think dodgeball with a grenade!
The generated environment can be used to bounce, corner, and surprise foes.
Main features:
- Up to 4 players
- Team play
- 3 match types fully configurable
- Single player training "bot"
- 4 types of tiles (ground, solid, bounce, holes)
- Lobby and in-game "emotes"
- Last game and total results
- Potato deflection
- Overtime for first position
- Fullscreen / Window options
- In-game music and sounds
Enhancements:
- Players can join games in progress
- Button clicks can be cancelled
- Updated version system
- MSVCP71.DLL part of installation
- Fixed bug where we could not click buttons in the lobby
- Music can again be turned off (was broken since v. 1.1.0)
- Players will see a black screen while waiting for other players.
- Fixed number of "Killed-KilledBy" when playing in teams.
- Linux specific updates
- Statically linked freeglut and glpng
- Ability to change from fullscreen to window mode and vice versa,
- Fixed crash on clients when the server leaves the game,
- Cursor can be moved while loading the lobby.

TinyButStrong is a template class for PHP that allows you to generate HTML pages using a database like PostgreSQL, MySQL, SQLite in native, and any other databases.
It is possible to design templates using any visual HTML editor (like Dreamweaver or FrontPage).
It features simple block management, useful display formats, conditional displaying for blocks and locators, a cache system, and the ability to include other HTML pages and execute associated scripts.
Main features:
- an connect to any database type (in native: MySql, SQLite, PostgreSQL),
- easy date-time and numeric formats,
- blocks with alternated display,
- multi-columns display,
- conditional display,
- event functions,
- file inclusion and other scripts execution,
- cache system.
Enhancements:
- This is a major version.
- The source is optimized, it is smaller, and it merges faster.
- There are 5 bugs fixed and 7 new features.
- It includes Onload Var fields that can be automatically merged when the template is loaded.
- There are new formats for time without leading zeros.
- The parameter ope can support several operations.
- There are special Var fields to merge PHP constants and to display TBS detailed information.