Free sound server fatal error software for linux

Streamnik Server project is an IPTV server based on the open codecs Ogg/Vorbis and Ogg/Theora. It can stream a number of different channels and is optimized to run on leased (virtual) servers. The program schedule is defined by an SQL database table and can be changed at runtime.

C++ Server Pages is a partial Java server pages and servlet implementation in C++. C++ Server Pages is written as Apache 2.0 modules, with the focus on performance.

Sound Monitor is a GNOME panel applet, it displays the current Volume output of the Esound daemon, also, optionally shows the Esound status: Off(error), Standby, Ready. The esound server information can be displayed, the balance and volume can be also be adjusted for streams and samples. An extra program, esdpvd is included that will allow saving of stream volumes between sessions.
For installation do the basically make ; make install should do it.
The applet can then be run by selecting:
Panel->Add applet->Multimedia->Sound Monitor
Additional themes go into (gnome-prefix)/share/sound-monitor2
To make your own theme, see the SKIN-SPECS file.
Keyboard support:
An applet of this type does not really need to have keyboard shortcuts. But for themes that are resizable (they have a button that can be dragged to resize the applet), when the size button has focus the shift+arrow keys will resize the applet, shift+home will reset the applet theme to its default size.
Enhancements:
- sound-monitor_applet.spec.in: Added icon, tested build.
- src/themes/Makefile.am: Install SKIN-SPECS file.
- configure.in: Release 1.99.0

Unicode Error Detector is a product for Plone used to pinpoint errors in your application leading to UnicodeDecodeErrors.

Do not use this product unless you are actively debugging a Unicode Error. Never use this product in production sites.

UnicodeDecodeErrors typically occur when you try to add a Unicode string to a non-ascii string. This product patches StringIO used by page templates to check if the appended string is a Unicode string, and if it is, it replaces the string with an error marker.

As there is some overhead associated with inspecting the strings instead of just appending to the output, this product is meant for debugging purposes only.

Usage

Put the product in your Products directory and restart Zope. Load the template causing the UnicodeDecodeError, and this tool will indicate the location by printing THIS IS WHERE THE ERROR IS in the rendered template.

You can then inspect the template and/or code more closely to figure out where the decode error happens.

Ice Sound Manager was designed to ease the management of sound events, sound themes, and the IceSound server in the IceWM environment under Linux/Unix. It is also intended to be an improvement upon the noble, but primitive icesndcfg.
The main improvements over icesndcfg include a support for sound event "themes", more comprehensive help, easy management and configuration of the IceSound server, a cleaner GUI interface, automatic starting of the IceSound server, and a more conservative approach to disk space usage. In addition, Ice Sound Manager includes a built-in "Setup" program which runs the first time you run Ice Sound Manager.
The application is written in Python (making it more easily ported across various platforms and architectures) and uses GTK through the PyGTK libraries. This application is available in both .tar.bz2, RPM, and static binary (for people without Python/PyGtk).
Please note that the tar.gz file does NOT need to be compiled (this is python, remember). System requirements are as follows: Python 2.2, PyGTK-2 1.9.9/2.0.0, IceWM (or IceWM-Gnome) 1.2.0 or better - with the IceSound Server executable (generally called, icesound or icesound-gnome). IceWM version 1.2.6 or better is highly recommended.
NONE of the following is required: Gnome, Gnome libs, or PyGnome (python-gnome). This application has NOT been tested with earlier versions of Python, IceWM, PyGTK, and IceSound Server. I cant say that it wont work with earlier versions, but I certainly cant say that it will. This application has NO dependencies on Gnome. 8-)
This software is distributed under the GPL license (included in the documentation and source code): Its free and open source for all legal and NON-commerical use, copying, modification, and redistribution, provided all of the authors credits are left in-tact and unmodified. This software is distributed AS-IS, with no warranty whatsoever. Copyright (c) 2002-2004 Erica Andrews (PhrozenSmoke[at]yahoo.com). All rights reserved.
Ice Sound Manager has been designed and tested in the following environment(s): Mandrake 8.1, SuSe 8.1, Kernel 2.4.8 / 2.4.19, Glibc 2.2.4 / 2.2.5, XFree86 4.0.1 - 4.3.0, Python 2.2 - 2.2.1, PyGtk 0.6.9/PyGtk-2 2.0.0, Gtk version 1.2.8-4-1.2.10, Gtk+2 version 2.0.6, IceWM 1.0.9 - 1.2.15, IceWM-Gnome 1.0.9 / 1.2.2, with both icesound and icesound-gnome sound server executables. The test computers (3) were all Pentium 1, ranging in memory from 64MB to 256MB - nothing spectacular. It should run well on very old computers.
Requierments:
- Access to a Bash shell (very important), Python (2.2 or better), PyGtk-2 (1.9.9/2.0.0 or better), and Gtk+ 2.0.6 or better - neither Gnome nor PyGnome is required. (IceWMCP versions 2.5 and earlier require Gtk+1 and PyGtk-1 0.6.9) Repeat: IceWM requires NOTHING gnome-related.
- Also, your version of PyGtk should have the Gdk-Pixbuf modules on your system. Please run ALL IceWMCP programs from a BASH shell: Using other shells such as ksh, pdksh, csh, tcsh, etc. is likely to cause problems. If your IceWMCP programs have trouble launching other applications, it is most likely because you are using something other than a Bash (/bin/bash) shell. Run the programs from Bash...period! If you attempt to run the application and get ANY kind of error that says something like "Import Error", it means YOU do not have all the necessary Python libraries installed or do not have them installed correctly: This is NOT a bug, so do not file a bug report when you dont have the necessary software properly installed. Getting Python and PyGtk and getting them setup right is YOUR business. DO NOT ask for help installing Python, PyGtk, or GdkPixbuf. I recommend you get them from: http://speakeasy.rpmfind.net. If you are using a Python version lower than 2.2 and are too lazy to upgrade, use the "binary" distribution of IceWM Control Panel, or dont bother at all. NOTE: These requirements apply only to the standard pure-python version of IceWM Control Panel. Compiled, binary copies of IceWM Control Panel are stand-alone executables that do NOT require Python or PyGtk.
- Disk space requirements: The standard, pure-Python version of IceWM Control Panel uses approximately 1.75-2.2 MB of disk space - very small! The compiled, binary version of IceWM Control Panel uses about 3.7 MB of disk space. Yes, the binary version is large, so people too lazy or impatient to install Python and PyGtk properly and choose to use the stand-alone binary version will pay with disk space. At last check, the Hardware (or System) plug-in uses about 1.9 MB of disk space (most of it being the hardware ID data file).

Net::Server::Mail::ESMTP::XFORWARD is a Perl module to add support to the XFORWARD command in Net::Server::Mail::ESMTP.

SYNOPSIS

use Net::Server::Mail::ESMTP;

my @local_domains = qw(example.com example.org);
my $server = new IO::Socket::INET Listen => 1, LocalPort => 25;

my $conn;
while($conn = $server->accept)
{
my $esmtp = new Net::Server::Mail::ESMTP socket => $conn;
# activate some extensions
$esmtp->register(Net::Server::Mail::ESMTP::XFORWARD);
# adding some handlers
$esmtp->set_callback(RCPT => &validate_recipient);
$esmtp->process();
$conn->close()
}

sub validate_recipient
{
my($session, $recipient) = @_;

my $domain;
if($recipient =~ /@(.*)>s*$/)
{
$domain = $1;
}

if(not defined $domain)
{
return(0, 513, Syntax error.);
}
elsif(not(grep $domain eq $_, @local_domains) && $session->get_forwarded_addr != "10.1.1.1")
{
return(0, 554, "$recipient: Recipient address rejected: Relay access denied");
}

return(1);
}

When using a Net::Server::Mail::ESMTP script inside a MTA and not in front of Internet, values like client IP address are not accessible to the script and when the script returns mail to an other instance of smtpd daemon, it logs "localhost" as incoming address. To solve this problem, some administrators use the XFORWARD command. This module gives the ability to read and store XFORWARD informations.