sony minidisc
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 57
Sony RM-X2S XMMS Plugin 1.3
Sony RM-X2S XMMS Plugin plugin lets you control XMMS with a Sony RM- X2S joystick. more>>
Sony RM-X2S XMMS Plugin plugin lets you control XMMS with a Sony RM- X2S joystick. These joysticks are typically shipped with certain car radios. The use of similar devices from other vendors should be possible. The joystick is connected to the standard game port.
Installation:
Compile and install the plugin source with:
./configure
make
make install
You can supply the following options to configure:
--enable-debug
enable debugging prints
--enable-nls
enable localization
You can insert module options into /etc/modules.conf to load the joystick module automatically by make installmodule.
If you are not root, or dont want to install into the global plugin directory use make install-home to install the plugin to your private xmms directory (~/.xmms).
Setup in XMMS
- Now start xmms and get the plugin configuration panel with CTRL+p. Select the plugin and click the Configure button (picture).
- Check the device setting. If you have only one joystick port, the default of /dev/js0 should be fine. (picture)
- Calibrate the joystick. The systems needs to perform 4 measurements each lasting 2 seconds. If you press the calibration button the first measure will start and a popup window will appear after 2 seconds. (picture)
- Press the OFF Button on your Sonystick on click OK. Leave the button pressed during the measurement (2 seconds) until the text in the popup window changes
- Now the same procedure with the MUTE Button
- Now press no button on the sonystick
- Now set the precision to 5. If you experience difficulties when using the joystick (events without touching the joystick or some buttons having the same event) you can alter this setting. Lower values make the joystick more precise, thus harder to control.
- Configure the buttons. A beep indicates that an event was successfully recorded.
- Pressing the OK Button to save the configuration. Cancel will not save any changes made to the configuration.
- Finally you can enable the plugin in the XMMS preferences window.
<<lessInstallation:
Compile and install the plugin source with:
./configure
make
make install
You can supply the following options to configure:
--enable-debug
enable debugging prints
--enable-nls
enable localization
You can insert module options into /etc/modules.conf to load the joystick module automatically by make installmodule.
If you are not root, or dont want to install into the global plugin directory use make install-home to install the plugin to your private xmms directory (~/.xmms).
Setup in XMMS
- Now start xmms and get the plugin configuration panel with CTRL+p. Select the plugin and click the Configure button (picture).
- Check the device setting. If you have only one joystick port, the default of /dev/js0 should be fine. (picture)
- Calibrate the joystick. The systems needs to perform 4 measurements each lasting 2 seconds. If you press the calibration button the first measure will start and a popup window will appear after 2 seconds. (picture)
- Press the OFF Button on your Sonystick on click OK. Leave the button pressed during the measurement (2 seconds) until the text in the popup window changes
- Now the same procedure with the MUTE Button
- Now press no button on the sonystick
- Now set the precision to 5. If you experience difficulties when using the joystick (events without touching the joystick or some buttons having the same event) you can alter this setting. Lower values make the joystick more precise, thus harder to control.
- Configure the buttons. A beep indicates that an event was successfully recorded.
- Pressing the OK Button to save the configuration. Cancel will not save any changes made to the configuration.
- Finally you can enable the plugin in the XMMS preferences window.
Download (0.20MB)
Added: 2006-05-06 License: GPL (GNU General Public License) Price:
1298 downloads
FunkyMD Suite 0.5
FunkyMD Suite aims to provide Linux users with tools to title minidiscs using a portable Sony minidisc recorder. more>>
FunkyMD Suite aims to provide Linux users with tools to title minidiscs using a portable Sony minidisc recorder and a self-made interface for the parallel port.
The project is currently run by Thomas Perl and was inspired by the great MDCOM interface (see links below for more information).
<<lessThe project is currently run by Thomas Perl and was inspired by the great MDCOM interface (see links below for more information).
Download (0.010MB)
Added: 2007-04-26 License: GPL (GNU General Public License) Price:
913 downloads
MiniDV Assembler 0.96
MiniDV Assembler application is particularly useful for owners of digital MiniDV cameras. more>>
MiniDV Assembler application is particularly useful for owners of digital MiniDV cameras and others who use the Sony MiniDV format for high quality video production.
MiniDV Assembler allows you to append multiple MiniDV files with nice looking transition effects for both audio and video. Multiple transition effects are supported, like cross-fade, zoom, blur and a flash effect.
I created MiniDV Assembler because there are no easy to use video editing applications for Linux yet. Yes, Kino is promising, but its user interface is still a mess and development is slow.
MiniDV Assembler only touches the head and tail parts of the original video files that are needed to create the transition effects. The rest of the video is left untouched, which means zero quality loss.
MiniDV Assembler can also be used to generate video editing scripts that can be run without KDE and Kommander.
<<lessMiniDV Assembler allows you to append multiple MiniDV files with nice looking transition effects for both audio and video. Multiple transition effects are supported, like cross-fade, zoom, blur and a flash effect.
I created MiniDV Assembler because there are no easy to use video editing applications for Linux yet. Yes, Kino is promising, but its user interface is still a mess and development is slow.
MiniDV Assembler only touches the head and tail parts of the original video files that are needed to create the transition effects. The rest of the video is left untouched, which means zero quality loss.
MiniDV Assembler can also be used to generate video editing scripts that can be run without KDE and Kommander.
Download (0.024MB)
Added: 2006-06-10 License: GPL (GNU General Public License) Price:
1232 downloads
Sync4j 2.3
Sync4j is a mobile application server and more. more>>
Sync4j is a mobile application server, and more. Sync4j includes a suite of tools to develop, deploy and manage any mobile project. It is a certified implementation of the Open Mobile Alliance Data Synchronization and Device Management protocols (OMA DS and DM, formerly known as SyncML).
Sync4j reached more than 19,000 downloads in a single month and it is supported by one of the largest mobile developers community in the world.
Main features:
- Sync4j Server: a mobile application server with connectors to SQL relational databases, Microsoft Exchange, Lotus Domino and SugarCRM.
- Sync4j Clients: applications for Outlook, Windows Mobile PocketPC, BlackBerry, Palm and iPod that you can use to synchronize your PIM data (address book and calendar) with the server
- Sync4j Email Gateway: a POP, IMAP and SMTP gateway, to support your mobile email needs.
- Sync4j Software Development Kit: tools to develop sometimes-connected mobile applications on devices (in Java - J2SE and J2ME - and C++) and to add data sources to the server
- Sync4j Device Management: an OMA DM server to remotely manage mobile devices
A wireless application needs data. The information must be available even when the device is off-line. Synchronization between multiple mobile devices and corporate servers is a fundamental component in every wireless project: data is supposed to be consistent when accessed by multiple users who are not always connected to the network.
Once a wireless application is developed, it needs to be transferred to a remote device, over-the-air. Then, it must be kept up-to-date. Application provisioning is pivotal for the success of any mobile project.
Developers of applications around the world have been looking for a platform that would make it easier to create mobile applications. IT Managers are struggling with PIM synchronization and mobile email deployments, locked by commercial vendors on a spiraling high cost structure and unable to manage a fast growing fleet of mobile devices. Sync4j is the solution they are looking for.
Open source means freedom from vendor lock-in and high quality software (thousand of eyes on the code, an enourmous community effort for testing). Sync4j is well supported by the community and the company behind it, Funambol.
Sync4j is an open source complete and unique mobile application server, addressing all the aspects of the equation:
- data synchronization, including PIM and email
- application provisioning
- device management
Sync4j is multi-device and multi-platform, running both in Windows and Linux. It runs on Tomcat and on top of J2EE application servers. It has been designed for carrier-grade deployments.
Since day one, scalability and reliability have been a clear focus of the Sync4j architecture, Sync4j is built on the Open Mobile Alliance data synchronization and device management standards (OMA DS and DM, formerly known as SyncML), thus leveraging the availability of SyncML clients pre-installed on cellular phones (such as all Symbian, Nokia, Motorola, Sony Ericsson, Siemens and others). For devices where a SyncML client is missing, Sync4j provides its own clients: Outlook, Windows Mobile PocketPC, BlackBerry, Palm and iPod.
Sync4j target market is everyone looking to build, deploy and manage a mobile project:
- Developers who need to extend an existing product to the mobile world or are looking for an easy way to create new mobile applications, grabbing data from existing data sources (such as SQL databases, Exchange, Domino or SugarCRM) or adding new data sources.
- IT Managers that want to deploy a PIM and mobile email solution or just need a way to manage a fleet of mobile devices.
- Device Manufacturers, that are looking for an OMA DM or DS client.
Download includes:
Apache Tomcat 5.0, Sync4j Admin 1.2.4, Sync4j Java GUI Client 1.0.9, PIM Web Demo 1.1.7. Runs out-of-the-box.
Enhancements:
- Major bugfixes
<<lessSync4j reached more than 19,000 downloads in a single month and it is supported by one of the largest mobile developers community in the world.
Main features:
- Sync4j Server: a mobile application server with connectors to SQL relational databases, Microsoft Exchange, Lotus Domino and SugarCRM.
- Sync4j Clients: applications for Outlook, Windows Mobile PocketPC, BlackBerry, Palm and iPod that you can use to synchronize your PIM data (address book and calendar) with the server
- Sync4j Email Gateway: a POP, IMAP and SMTP gateway, to support your mobile email needs.
- Sync4j Software Development Kit: tools to develop sometimes-connected mobile applications on devices (in Java - J2SE and J2ME - and C++) and to add data sources to the server
- Sync4j Device Management: an OMA DM server to remotely manage mobile devices
A wireless application needs data. The information must be available even when the device is off-line. Synchronization between multiple mobile devices and corporate servers is a fundamental component in every wireless project: data is supposed to be consistent when accessed by multiple users who are not always connected to the network.
Once a wireless application is developed, it needs to be transferred to a remote device, over-the-air. Then, it must be kept up-to-date. Application provisioning is pivotal for the success of any mobile project.
Developers of applications around the world have been looking for a platform that would make it easier to create mobile applications. IT Managers are struggling with PIM synchronization and mobile email deployments, locked by commercial vendors on a spiraling high cost structure and unable to manage a fast growing fleet of mobile devices. Sync4j is the solution they are looking for.
Open source means freedom from vendor lock-in and high quality software (thousand of eyes on the code, an enourmous community effort for testing). Sync4j is well supported by the community and the company behind it, Funambol.
Sync4j is an open source complete and unique mobile application server, addressing all the aspects of the equation:
- data synchronization, including PIM and email
- application provisioning
- device management
Sync4j is multi-device and multi-platform, running both in Windows and Linux. It runs on Tomcat and on top of J2EE application servers. It has been designed for carrier-grade deployments.
Since day one, scalability and reliability have been a clear focus of the Sync4j architecture, Sync4j is built on the Open Mobile Alliance data synchronization and device management standards (OMA DS and DM, formerly known as SyncML), thus leveraging the availability of SyncML clients pre-installed on cellular phones (such as all Symbian, Nokia, Motorola, Sony Ericsson, Siemens and others). For devices where a SyncML client is missing, Sync4j provides its own clients: Outlook, Windows Mobile PocketPC, BlackBerry, Palm and iPod.
Sync4j target market is everyone looking to build, deploy and manage a mobile project:
- Developers who need to extend an existing product to the mobile world or are looking for an easy way to create new mobile applications, grabbing data from existing data sources (such as SQL databases, Exchange, Domino or SugarCRM) or adding new data sources.
- IT Managers that want to deploy a PIM and mobile email solution or just need a way to manage a fleet of mobile devices.
- Device Manufacturers, that are looking for an OMA DM or DS client.
Download includes:
Apache Tomcat 5.0, Sync4j Admin 1.2.4, Sync4j Java GUI Client 1.0.9, PIM Web Demo 1.1.7. Runs out-of-the-box.
Enhancements:
- Major bugfixes
Download (73.2MB)
Added: 2006-02-27 License: GPL (GNU General Public License) Price:
780 downloads
another Amarok RC on Sony Ericsson 0.3
another Amarok RC on Sony Ericsson is a remote control for Amarok. more>> <<less
Download (0.042MB)
Added: 2007-06-21 License: GPL (GNU General Public License) Price:
868 downloads
S-Jog 0.6
S-Jog is a GUI for Sony VAIO Jog Wheel. more>>
S-Jog is a GUI for Sony VAIO Jog Wheel.
S-Jog is a program that uses the Sony Vaio laptops Jog Wheel to launch user applications, adjust the screen brightness, volume, and also to scroll pages up and down (like a mousewheel).
S-Jog pops up when you move the Jog Wheel, then disappears after 3 seconds of inactivity so that it doesnt waste desktop space.
The aim of S-Jog is to give Linux a nice graphical application to manage Jog-Dial wheel on Sony Vaio laptops. It utilizes the Sony Programmable I/O driver in recent 2.4.x kernels or the legacy SPIC driver provided in S-Jog distribution.
Currently, S-Jog is able to launch applications defined in the sjogrc file, adjust the screen brightness level and also the master volume of the sound card. Also S-Jog makes the Jog-Dial work like a mousewheel and it runs in background.
Enhancements:
- README, sjog.1: Updated doc file
<<lessS-Jog is a program that uses the Sony Vaio laptops Jog Wheel to launch user applications, adjust the screen brightness, volume, and also to scroll pages up and down (like a mousewheel).
S-Jog pops up when you move the Jog Wheel, then disappears after 3 seconds of inactivity so that it doesnt waste desktop space.
The aim of S-Jog is to give Linux a nice graphical application to manage Jog-Dial wheel on Sony Vaio laptops. It utilizes the Sony Programmable I/O driver in recent 2.4.x kernels or the legacy SPIC driver provided in S-Jog distribution.
Currently, S-Jog is able to launch applications defined in the sjogrc file, adjust the screen brightness level and also the master volume of the sound card. Also S-Jog makes the Jog-Dial work like a mousewheel and it runs in background.
Enhancements:
- README, sjog.1: Updated doc file
Download (0.15MB)
Added: 2006-09-28 License: GPL (GNU General Public License) Price:
1125 downloads
rsjog 1.1
rsjog is an X11 handler for Sony Vaio jog wheels. more>>
rsjog project is an X11 handler for Sony Vaio jog wheels.
It is designed to work with the /dev/sonypi kernel module.
It provides mousewheel emulation and (optionally) graphical menus you can navigate with the wheel.
Main features:
Simple mode (no menu file)
- Mouse wheel simulation for scroll wheel
- Press scroll wheel for middle button simulation
- Back button (if available) simulates middle button too
Menu mode
- Mouse wheel simulation for scroll wheel
- Press scroll wheel to pop up menu
- menu hides again after a time if not used
- Scroll through menu with scroll wheel
- Press scroll wheel to launch action
- Actions to launch programs
- Action to change volume using the wheel
- Action to change lcd brightness using the wheel
- Actions to simulate mouse button presses
- Back button (if available) simulates middle button if menu is not up but also goes back through menu structure/closes menu if visible
- Configuration file to specify menu structure
- Configuration file to specify vaio FN key bindings, file paths, timeouts, slider granularity, etc.
- Automatically reloads config files when they change
<<lessIt is designed to work with the /dev/sonypi kernel module.
It provides mousewheel emulation and (optionally) graphical menus you can navigate with the wheel.
Main features:
Simple mode (no menu file)
- Mouse wheel simulation for scroll wheel
- Press scroll wheel for middle button simulation
- Back button (if available) simulates middle button too
Menu mode
- Mouse wheel simulation for scroll wheel
- Press scroll wheel to pop up menu
- menu hides again after a time if not used
- Scroll through menu with scroll wheel
- Press scroll wheel to launch action
- Actions to launch programs
- Action to change volume using the wheel
- Action to change lcd brightness using the wheel
- Actions to simulate mouse button presses
- Back button (if available) simulates middle button if menu is not up but also goes back through menu structure/closes menu if visible
- Configuration file to specify menu structure
- Configuration file to specify vaio FN key bindings, file paths, timeouts, slider granularity, etc.
- Automatically reloads config files when they change
Download (0.042MB)
Added: 2006-09-28 License: GPL (GNU General Public License) Price:
649 downloads
Xbox360 Controller Driver
Xbox360 Controller Driver package contains the diabolixs compiled Xbox360 controller driver for Linux on the PS3. more>>
Xbox360 Controller Driver package contains the diabolixs compiled Xbox360 controller driver for Linux on the PS3.
Its been tested with Fedora Core 5 (PPC distribution) using Snes9x and Doom.
The Xbox 360 is the successor to Microsofts Xbox video game console, developed in cooperation with IBM, ATI, Samsung and SiS. Information on the console first came through viral marketing campaigns and it was officially unveiled on MTV on May 12, 2005, with detailed launch and game information divulged later that month at the Electronic Entertainment Expo.
The Xbox 360 is the first console to have a near-simultaneous launch across the three major regions, and the first to provide wireless controller support at launch. The console sold out completely at release and by the end of 2006 had sold 10.4 million worldwide.
The Xbox 360 was the first home console to be released in the seventh generation of game consoles and competes against Sonys PlayStation 3 and Nintendos Wii. Its Xbox Live service allows players to compete online as well as download games and additional content.
<<lessIts been tested with Fedora Core 5 (PPC distribution) using Snes9x and Doom.
The Xbox 360 is the successor to Microsofts Xbox video game console, developed in cooperation with IBM, ATI, Samsung and SiS. Information on the console first came through viral marketing campaigns and it was officially unveiled on MTV on May 12, 2005, with detailed launch and game information divulged later that month at the Electronic Entertainment Expo.
The Xbox 360 is the first console to have a near-simultaneous launch across the three major regions, and the first to provide wireless controller support at launch. The console sold out completely at release and by the end of 2006 had sold 10.4 million worldwide.
The Xbox 360 was the first home console to be released in the seventh generation of game consoles and competes against Sonys PlayStation 3 and Nintendos Wii. Its Xbox Live service allows players to compete online as well as download games and additional content.
Download (0.071MB)
Added: 2007-01-09 License: Freeware Price:
640 downloads
Wolvix Media Edition 1.0.4
Wolvix is a desktop oriented distribution made to fit the needs from regular to advanced desktop users. more>>
Wolvix is a desktop oriented distribution made to fit the needs from regular to advanced desktop users.
This edition is meant to be a portable audio & video ripping/encoding and editing OS, without DRM and rootkit problems or worries. I guess you can say Sony inspired me somewhat to create this edition.
Media Edition features lots of audio and video software and it also has most of the applications you need for daily tasks: Web browser, IM client, word processor, spreadsheet, graphics manipulation tools, etc.
In this edition you will find some of the many great multimedia applications available for GNU/Linux. You get: CD rippers/encoders; audio editors; a digital audio workstation; an audio mastering program; DVD rippers/encoders; a DVD authoring program; video editors; a movie studio program; TV tuner programs; GUI front ends for portable audio devices; and of course various music and multimedia players.
In addition to the Xfce4 Desktop Environment, Media Edition features the Fluxbox Window Manager.
Enhancements:
Updated:
- gmusicbrowser
- XChat
- Firefox
- Thunderbird
- Abiword
- Gimp
- Comix
Added:
- Thunar (File manager)
- MP3Creator (Console CD ripper)
- networkconfig (Config tool from Zenwalk)
- Kye (Puzzle game)
- Freeciv (Strategy game)
- Bygfoot (Football manager game)
<<lessThis edition is meant to be a portable audio & video ripping/encoding and editing OS, without DRM and rootkit problems or worries. I guess you can say Sony inspired me somewhat to create this edition.
Media Edition features lots of audio and video software and it also has most of the applications you need for daily tasks: Web browser, IM client, word processor, spreadsheet, graphics manipulation tools, etc.
In this edition you will find some of the many great multimedia applications available for GNU/Linux. You get: CD rippers/encoders; audio editors; a digital audio workstation; an audio mastering program; DVD rippers/encoders; a DVD authoring program; video editors; a movie studio program; TV tuner programs; GUI front ends for portable audio devices; and of course various music and multimedia players.
In addition to the Xfce4 Desktop Environment, Media Edition features the Fluxbox Window Manager.
Enhancements:
Updated:
- gmusicbrowser
- XChat
- Firefox
- Thunderbird
- Abiword
- Gimp
- Comix
Added:
- Thunar (File manager)
- MP3Creator (Console CD ripper)
- networkconfig (Config tool from Zenwalk)
- Kye (Puzzle game)
- Freeciv (Strategy game)
- Bygfoot (Football manager game)
Download (460.5MB)
Added: 2006-04-24 License: GPL (GNU General Public License) Price:
1288 downloads
KVaio sony_acpi support 0.1
KVaio sony_acpi support is a patch for kdeutils 3.5.6 to get very hacky support for brightness selection on Sony Vaio Laptops. more>>
KVaio sony_acpi support is a patch for kdeutils 3.5.6 to get very hacky support for brightness selection on Sony Vaio Laptops using the sony_acpi module as well as a working eject button on VGN-TX models.
Further information on sony_acpi: http://www.popies.net/sonypi/index.html
<<lessFurther information on sony_acpi: http://www.popies.net/sonypi/index.html
Download (MB)
Added: 2007-04-02 License: LGPL (GNU Lesser General Public License) Price:
947 downloads
Python library for PS3 0.1.2
Python library for PS3 (Sony Playstation 3) game development under Linux. more>>
Python library for PS3 (Sony Playstation 3) game development under Linux. Includes: rendering to the PS3 frame buffer on a per pixel basis or with blittable objects (solid, masked or alpha blended), support for PS3 controllers and integration with PIL.
As you may know, Ive been writing my PS3 stuff with a view to building up a library suitable for writing games and as I thought about it more the idea of using a scripting language for the game seemed the most logical way forward. I plumped on python as Id used it before for a couple of small jobs and it seemed like a nice language with a lot of support. Plus, it has the advantage of being pre-installed on most Linux distributions and very easy to extend, and so the PS3 library for python was born...
Brief bullet points of the current build:
Support for the PS3 frame buffer on a per pixel basis
Support for blittable objects (solid, masked or alpha blended)
Support for the PS3 controllers
Easy integration with PIL for image manipulation and text rendering
A proof-of-concept breakout game
After about a day and a half development, the core of the library was in place but in a not very visible way. It seemed that the only way I could actually demonstrate this to all be good stuff is by writing a quick game. And breakout is one of the simplest, so I spent another day writing that. Its important to have a good demo on release... So, Ill settle for this half-hearted attempt at a breakout game whose main redeeming feature is that it has alpha transparency on all the blocks!
Just to whet your interest, heres an example of how easy the code can be (taken directly from the test.py file):
image = Blittable(Image.open("miglu.jpg"))
for count in xrange(screen.height-image.height):
screen.clear()
screen.blit(image, (count,count) )
screen.flip()
screen.wait()
Enhancements:
- Adds support for image blitting with the SPUs.
- Currently, using 4 SPUs the alpha blended breakout demo runs at 30fps at 720p.
<<lessAs you may know, Ive been writing my PS3 stuff with a view to building up a library suitable for writing games and as I thought about it more the idea of using a scripting language for the game seemed the most logical way forward. I plumped on python as Id used it before for a couple of small jobs and it seemed like a nice language with a lot of support. Plus, it has the advantage of being pre-installed on most Linux distributions and very easy to extend, and so the PS3 library for python was born...
Brief bullet points of the current build:
Support for the PS3 frame buffer on a per pixel basis
Support for blittable objects (solid, masked or alpha blended)
Support for the PS3 controllers
Easy integration with PIL for image manipulation and text rendering
A proof-of-concept breakout game
After about a day and a half development, the core of the library was in place but in a not very visible way. It seemed that the only way I could actually demonstrate this to all be good stuff is by writing a quick game. And breakout is one of the simplest, so I spent another day writing that. Its important to have a good demo on release... So, Ill settle for this half-hearted attempt at a breakout game whose main redeeming feature is that it has alpha transparency on all the blocks!
Just to whet your interest, heres an example of how easy the code can be (taken directly from the test.py file):
image = Blittable(Image.open("miglu.jpg"))
for count in xrange(screen.height-image.height):
screen.clear()
screen.blit(image, (count,count) )
screen.flip()
screen.wait()
Enhancements:
- Adds support for image blitting with the SPUs.
- Currently, using 4 SPUs the alpha blended breakout demo runs at 30fps at 720p.
Download (0.042MB)
Added: 2007-05-03 License: GPL (GNU General Public License) Price:
911 downloads
KSMS-Tool 1.0
KSMS-Tool is a tool for sending SMS via your mobile phone. more>>
KSMS-Tool is a tool for sending SMS via your mobile phone. In principle, every modern mobile phone should be supported; these have been explicitely tested so far:
- Siemens S55
- Sony-Ericsson K700i
The connection to the mobile phone is established via the serial interface. In principle, every serial emulation (e.g. via USB, IrDA, Bluetooth) should also work if an error-free connection is guaranteed (especially in the wireless cases IrDA resp. Bluetooth).
Details on choosing a non-default connection to the mobile phone or on how to populate the user-defined addressbook can be found on the KSMS-Tool homepage.
<<less- Siemens S55
- Sony-Ericsson K700i
The connection to the mobile phone is established via the serial interface. In principle, every serial emulation (e.g. via USB, IrDA, Bluetooth) should also work if an error-free connection is guaranteed (especially in the wireless cases IrDA resp. Bluetooth).
Details on choosing a non-default connection to the mobile phone or on how to populate the user-defined addressbook can be found on the KSMS-Tool homepage.
Download (0.030MB)
Added: 2006-06-05 License: GPL (GNU General Public License) Price:
1239 downloads
JACK Timemachine 0.3.1
JACK Timemachine is a tool that can record occasional bursts of interesting noise from jack apps. more>>
JACK Timemachine is a tool that can record occasional bursts of interesting noise from jack apps.
I used to always keep a minidisc recorder in my studio running in a mode where when you pressed record it wrote the last 10 seconds of audio to the disk and then caught up to realtime and kept recording.
The recorder died and havent been able to replace it, so this is a simple jack app to do the same job. It has the advantage that it never clips and can be wired to any part of the jack graph.
The idea is that I doodle away with whatever is kicking around in my studio and when I heard an interesting noise, Id press record and capture it, without having to try and recreate it.
It seems to be stable for me, but there could be threading issues and race condidtions if run without SCHED_FIFO (ie. without jackd -R).
<<lessI used to always keep a minidisc recorder in my studio running in a mode where when you pressed record it wrote the last 10 seconds of audio to the disk and then caught up to realtime and kept recording.
The recorder died and havent been able to replace it, so this is a simple jack app to do the same job. It has the advantage that it never clips and can be wired to any part of the jack graph.
The idea is that I doodle away with whatever is kicking around in my studio and when I heard an interesting noise, Id press record and capture it, without having to try and recreate it.
It seems to be stable for me, but there could be threading issues and race condidtions if run without SCHED_FIFO (ie. without jackd -R).
Download (0.15MB)
Added: 2006-02-09 License: GPL (GNU General Public License) Price:
1353 downloads
Yellow Dog Linux 5.0.2
Yellow Dog Linux is the Premier Linux Operating System for PowerPC. more>>
Yellow Dog Linux is the Premier Linux Operating System for PowerPC.
Proven world-wide as the preferred Linux OS for the Power architecture, v4.1 brings Terra Soft into its 8th year of Power Linux development and support. Yellow Dog Linux v4.1 marks a returning point in Terra Softs effort to again provide a leading desktop Linux OS.
Yellow Dog Linux combines the preferred desktops KDE and Gnome with the latest sound and graphic card support, leading (but not bleeding) edge kernels and stable, functional compilers for code development. And of course, the foundation applications and servers expected of all modern Linux operatings systems for web, database, email, and network services.
What will you do with your PowerMac after Apple switches to Intel?
We have an answer--Faster, more stable, and far more efficient as a desktop OS, Yellow Dog Linux is a solid replacement (not just an alternative) to OSX. Breath new life into your PowerPC G3 and G4, giving it a second wind as a personal workstation, or a new function as a web, email, or data server. Want to see how your G5 runs Linux? You may dual-boot both OSX and Yellow Dog Linux or take the leap and run Yellow Dog Linux alone, taking advantage of the multitude of included, freely available, and commercial applications.
Main features:
New or Improved Device Support
- Backlit keys.
- PCMCIA cell phone and modem support.
- Support for Atheros wi-fi cards.
- Dual head config via the GUI.
- Install direct to and boot from FireWire drives.
- USB device auto-mount under both KDE & GNOME.
- Greatly improved sound support.
- Graphical Up2Date package install and update tool.
- Support for the latest Apple Power Books.
- Beta support for Apple G5 PowerMacs with dual core CPUs.
- Beta Extreme driver will be available shortly after release, via YDL.net Enhanced accounts.
Enhancements:
- We are pleased to announce the release of Yellow Dog Linux 5.0.2, a single Install DVD with support for the Apple G4 and G5 computers, Sony PS3, and IBM System p servers, including the JS20/21, OpenPower, and current POWER5 systems. Yellow Dog Linux 5.0.2 offers: kernel 2.6.22-rc4; SDK v2.0 for Cell BE; more than 70 bug fixes and updates; continued support for both 32-bit and 64-bit systems; beta IBM System p support. The IBM Software Development Toolkit (SDK) for Cell Broadband Engine (Cell BE) is a complete package of tools which allows developers to program optimized applications for platforms built upon the Cell BE. The SDK is composed of development tool chains, software libraries, and sample source.
<<lessProven world-wide as the preferred Linux OS for the Power architecture, v4.1 brings Terra Soft into its 8th year of Power Linux development and support. Yellow Dog Linux v4.1 marks a returning point in Terra Softs effort to again provide a leading desktop Linux OS.
Yellow Dog Linux combines the preferred desktops KDE and Gnome with the latest sound and graphic card support, leading (but not bleeding) edge kernels and stable, functional compilers for code development. And of course, the foundation applications and servers expected of all modern Linux operatings systems for web, database, email, and network services.
What will you do with your PowerMac after Apple switches to Intel?
We have an answer--Faster, more stable, and far more efficient as a desktop OS, Yellow Dog Linux is a solid replacement (not just an alternative) to OSX. Breath new life into your PowerPC G3 and G4, giving it a second wind as a personal workstation, or a new function as a web, email, or data server. Want to see how your G5 runs Linux? You may dual-boot both OSX and Yellow Dog Linux or take the leap and run Yellow Dog Linux alone, taking advantage of the multitude of included, freely available, and commercial applications.
Main features:
New or Improved Device Support
- Backlit keys.
- PCMCIA cell phone and modem support.
- Support for Atheros wi-fi cards.
- Dual head config via the GUI.
- Install direct to and boot from FireWire drives.
- USB device auto-mount under both KDE & GNOME.
- Greatly improved sound support.
- Graphical Up2Date package install and update tool.
- Support for the latest Apple Power Books.
- Beta support for Apple G5 PowerMacs with dual core CPUs.
- Beta Extreme driver will be available shortly after release, via YDL.net Enhanced accounts.
Enhancements:
- We are pleased to announce the release of Yellow Dog Linux 5.0.2, a single Install DVD with support for the Apple G4 and G5 computers, Sony PS3, and IBM System p servers, including the JS20/21, OpenPower, and current POWER5 systems. Yellow Dog Linux 5.0.2 offers: kernel 2.6.22-rc4; SDK v2.0 for Cell BE; more than 70 bug fixes and updates; continued support for both 32-bit and 64-bit systems; beta IBM System p support. The IBM Software Development Toolkit (SDK) for Cell Broadband Engine (Cell BE) is a complete package of tools which allows developers to program optimized applications for platforms built upon the Cell BE. The SDK is composed of development tool chains, software libraries, and sample source.
Download (MB)
Added: 2007-06-15 License: GPL (GNU General Public License) Price:
571 downloads
DV Video Assembler 0.93
DV Video Assembler allows you to append multiple Sony DV files. more>>
This application is particularly useful for owners of digital DV video cameras and other people who use the Sony DV video format for high quality video production.
DV Assembler allows you to append multiple Sony DV files with nice looking transition effects for both audio and video. Multiple transition effects are supported, like cross-fade, zoom, blur and a flash effect.
I created DV Assembler because there are no user friendly video editing applications for Linux. Yes, Kino is promising, but its user interface is still a mess and development is slow.
DV Assembler only touches the head and tail parts of the original video files that are needed to create the transition effects. The rest of the video is left untouched, which means zero quality loss.
DV Assembler can also be used to generate video editing scripts that can be run without KDE and Kommander.
<<lessDV Assembler allows you to append multiple Sony DV files with nice looking transition effects for both audio and video. Multiple transition effects are supported, like cross-fade, zoom, blur and a flash effect.
I created DV Assembler because there are no user friendly video editing applications for Linux. Yes, Kino is promising, but its user interface is still a mess and development is slow.
DV Assembler only touches the head and tail parts of the original video files that are needed to create the transition effects. The rest of the video is left untouched, which means zero quality loss.
DV Assembler can also be used to generate video editing scripts that can be run without KDE and Kommander.
Download (0.023MB)
Added: 2005-09-21 License: GPL (GNU General Public License) Price:
1498 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above sony minidisc search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
