Free software raid vista software for linux

SlaBuntuVMware is a useful installation suite for installing VMware Server on Slackware or Ubuntu.

The project automatically downloads packages from the VMware site.

Tested on Slackware 11. (Slackware 10.2 might not work - try)
Tested on Ubuntu Desktop Dapper Drake and Ubuntu Desktop Edgy.

IMPORTANT: this suite does not include the vmware server packs,
they are downloaded from the official VMware site.
You also need a server key for activating the product that you must
get (for free) from the VMware web-site (http://www.vmware.com/server/)

INSTALLATION (Slackware Linux) :

a) 1- The perfect setup for running vmware on Slackware is:
Slackware 11 (When you install the OS leave a big partion for your
virtual machines).

Using a good server with an hardware raid controller:

Suggested Partition Table (scsi disks, if ide hda):
/dev/sda1 swap (megs?gb? depends on your system)
/dev/sda2 / 10Gb
/dev/sda3 /home 2Gb
/dev/sda4 /vm (160 Gb the rest for your virtual machines)

You must do a normal install with X support but no KDE.


2- Dropline Gnome (http://www.droplinegnome.net)
It is suggested you run gnome on Slackware 11. Gnome is not
included in the distro cds, therefore you must download
Dropline Gnome.

3- Kernel 2.6.x (with the kernel sources into /usr/src/linux)
(Default Kernel 2.4.33.3 works perfectly though)

CAUTION: take a look on www.vmware.com for the
supported kernel 2.6 versions.

OR

- If you have problems building 2.6.x vmware kernel module, just use
the normal 2.4.33.3 kernel supplied with your slackware, or try the test26.s
or huge26.s supplied with your slackware cds.

b) - The base setup for running vmware on Slackware is:
1- Slackware 11
2- Kde(not tested can have problems with some libraries)
(if you do not want to Download and install Dropline Gnome)
3- Kernel 2.4.33 (with the kernel sources into /usr/src/linux)

Using a normal pc with no raid controller (so you should use linux
raid software):

Suggested Partition Table (scsi disks, if ide hda):
/dev/md1 swap (megs?gb? depends on your system)
/dev/md2 / 10Gb
/dev/md3 /home 2Gb
/dev/md4 /vm (100 Gb? the rest for your virtual machines)

---------------------------------------------------------------------------
If you do not want to use Gnome or Kde go at the end of this file.
---------------------------------------------------------------------------

2) After making sure you have everything (including the kernel sources
inside /usr/src/linux) you can run:

3) as root ./setup.sh

4) follow the steps provided
(you can hit ENTER to most of the questions (90%)

4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)

6) under an X session: Run the command "vmware" and Enjoy vmware!

INSTALLATION (Ubuntu Desktop, Alternate,NOT Server):

1) edit /etc/apt/sources.list and uncomment all the lines starting with deb

2) open a terminal (xterm) and type "sudo ./setup.sh"

3) follow the steps provided
(you can hit ENTER to most of the questions (90%)

4) provide the vmware free key when needed
(ask for it on the site http://www.vmware.com)

5) Run the command "vmware" and Enjoy vmware!

INSTALLATION ON UBUNTU SERVER

- Not tried yet, but you should at first download and install X11 and gnome
and then follow the steps provided for Ubuntu Desktop above.

IMPORTANT INFO:

- Remember that vmware server packs are downloaded from the official vmware
site and are property of the VMware Company: http://www.vmware.com/

- Remember that in order to use VMware you should accept the terms of the
VMware license that will be displayed during the installation process.

- Remember that in order to installa VMware you should ask the VMware
fellows for a key. Do this at the VMware site: http://www.vmware.com/

- To create virtual machines you should use the vmware console.
a) Run the command "vmware" and the vmware console starts up.
b) Then connect to localhost.

- After created a virtual machine to run it from the cmd line use:
bash# vmware-cmd vmname.vmx start

Author: Lorenzo Allori

#####################################################

If you do not have Gnome or Kde youll need the following:

#####################################################

- Slack with glibc and glibcsolibs installed. Make sure you
have X11 installed with a window manager.

Packages needed are:
glibc-2.3.6-i486-6.tgz
glibc-solibs-2.3.6-i486-6.tgz
kernel-source-2.4.33.3-noarch-1.tgz
x11-6.9.0-i486-11.tgz
x11-devel-6.9.0-i486-11.tgz
windowmaker-0.92.0-i486-1.tgz

You can find those on http://www.slackware.com.

Download them and to install those just type (as root):

# installpkg pkgname

When you have finished installing all the packages you need remember to run:

# ldconfig

- If you need a window manager you can install windowmaker:

# installpkg windowmaker-0.92-i486.tgz
# wmaker.inst

KDM Vista like Theme is a very nice KDM theme that looks like Vistas one.
I didnt see any Vista like KDM login theme... I wanted one so I tried.
Enhancements:
- There are now two themes. One for widescreen which is the same as the previous one and one for 4/3 screen. This new one has been successfully tested on a 1600 x 1200 screen. If you have other resolution, please try and report if it works.

Monetra (formerly known as MCVE) is a scalable credit card processing engine for Linux and UNIX. The project is designed to handle credit card authorizations and is certified to support major clearing house protocols.
Features include support for multiple modems, multiple merchant accounts, and multiple processors, all simultaneously -- as well as IP and SSL connectivity along side SQL database support.
Designed in C, conforming to POSIX standards, and utilizing light weight processes (threads), this product is able to handle a large number of transactions with high speed and minimal CPU usage.
Enhancements:
- A secure recurring billing module and card storage subsystem returning unique tracking tokens has been added and branded as Monetra DSS.
- This assists integrators with their PCI compliance so they dont need to store card numbers outside of Monetra.
- There is DNS caching for improved latency.
- Givex and FifthThrid 610 support have been added.
- Global Payments, VITAL, and NPC re-certifications.
- Visa gift-card support (balance inquiry and partial auths), as well as new card systems compliance updates for October 2007.
- Mac OS X for Intel, Windows Vista, and OpenBSD 4.0 support has also been added.

Parchive project is a tool that helps data recovery of multi-part archives on Usenet.

The original idea behind this project was to provide a tool to apply the data-recovery capability concepts of RAID-like systems to the posting and recovery of multi-part archives on Usenet. We accomplished that goal. Our new goal with version 2.0 of the specification is to improve.

It extends the idea of version 1.0 and takes the recovery process beyond the file-level barrier. This allows for more effective protection with less recovery data, and removes some previous limitations on the number of recoverable parts. See Par1 compared to Par2 for a more detailed view of the differences.

Because this new approach doesnt benefit from like sized files, it drastically extends the potiental applications of PAR. Files such as video, music, and other data can remain in a usable format and still have recovery data associated with them.

The technology is based on a Reed-Solomon Code implementation that allows for recovery of any X real data-blocks for X parity data-blocks present. (Data-blocks referring to files OR much smaller virtual slices of files).

The key to this mission is a clean file format specification which provides all the necessary capabilities for programs to easily verify and regenerate single missing parts out of a set of data-blocks.

FreeNAS 0.69b4 / 0.686.4 Stable gives a program which is to support FTP, NFS protocols, Software RAID(0,1,5) with a Full WEB configuration interface. It takes less than 16MB once installed on Compact Flash, hard drive or USB key.

Vista Basic provides a theme similar to Microsoft Vista.

window borders similar to those of Microsoft Vista when using non Aero compatible software (such as JRE 6 or Photoshop CS 2)

Raidmon is a shell script which runs as a daemon and monitors software RAID devices (Linux MD).

raidmon starts to beep when a disk fails or while a RAID device is resyncing after an unclean shutdown.

Every event also triggers the email alert mechanism, which sends mail to one or more persons with the details of whats going on.