Free simple graph software for linux

Squid Graph is a free, simple, yet powerful Squid v2 native logfile analysis tool that generates reports with graphical representation of the proxy servers traffic.
Squid Graph is distributed under the GNU General Public Licence (GPL), which means it is FREE FOR USE AND DISTRIBUTION.
Squid Graph was developed using the Linux operating system running kernel versions ranging from 2.2.x to 2.4.x with PERL 5.6.0. It should work on all other similar operating systems with PERL 5.6 and above installed.
Some platforms which have been reported to run Squid Graph successfully are FreeBSD, OpenBSD, Sun Solaris and most Linux kernel versions and distributions.
Enhancements:
- No algorithm changes, mostly changes to contact information etc. due to hand-over of project to SecurLogic.
Installation:
Extracting the Tarball
- Extract the Squid Graph tarball file after you have downloaded it. Those with Redhat Linux (or other similar distributions) can do this: -
$ tar -zxvf squid-graph-x.x.tar.gz
- Alternatively, those with UNIX-like operating systems can do this: -
$ zcat squid-graph-x.x.tar.gz | tar -xvf -
Gathering the Pre-requisites
- As of version 3.0, Squid Graph requires the GD perl module. You can download it from http://stein.cshl.org/WWW/software/GD/ or you can use the included GD-1.3.3.tar.gz file in the extras/ directory.
- Follow the intructions in the GD perl module to get it installed correctly before you proceed.
Compiling
- Squid Graph runs out of the box. You dont have to compile it.
Putting it in the Right Place
- You might not prefer to have Squid Graph lying around in your current directory, so you should just move it to a directory which makes sense, such as /usr/local/squid-graph. e.g.
$ mv squid-graph-x.x /usr/local/squid-graph
Runing Squid Graph:
Quickstart
First, get yourself into the bin/ directory, for example: -
$ cd /usr/local/squid-graph/bin
Next, you run Squid Graph with the default options. The bare minimum for Squid Graph to run is the --output-dir option. The output directory is where the generated HTML reports and image files would be written.
$ ./squid-graph --output-dir=/var/www/html/reports < /usr/local/squid/logs/access.log
NOTE: Please check your directory permissions of your output directory!
Usually you would want the output to be generated into a directory which your web server is configured with access to. In the above example, /usr/local/squid/logs/access.log is your Squid logfile.
Where you store your Squid logfile differs from system to system. For default Redhat Linux installations, it should be in /log/squid/access.log. For those who compiled and installed Squid with the default options, it should be in /usr/local/squid/logs/access.log.
Removing the TCP or UDP Graphs
Most of you wont use cache ICP or log cache ICP, so there wont be any UDP messages in your logfiles. Disabling UDP is a good idea. You can do this by specifying the --tcp-only command line option.
$ ./squid-graph --tcp-only --output-dir=/var/www/re...
Likewise, if you only want to see UDP statistics, you can specify the --udp-only option.
$ ./squid-graph --udp-only --output-dir=/var/www/re...
Generating Cumulative Graphs
As of version 3.0, Squid Graph comes with a new feature to generage cumulative curves instead of the normal graphs. This can be done by specifying the --cumulative option.
$ ./squid-graph --cumulative --tcp-only --output-dir=/var/www/re...
To have a better understanding of what cumulative curves are, take a look at the output examples. Do note that enabling cumulative graphs disables the Average Transfer Duration graph automatically.
Disabling Average Transfer Duration Graphs
You can disable the Average Transfer Duration Graph by specifying the --no-transfer-duration option.
$ ./squid-graph --no-transfer-duration --output-dir=/var/www/re...
Specifying the Start/End Time
By default, Squid Graph generates reports based on the current time. It starts analyzing from 24 hours before the current time until the current time. Sometimes we cycle logfiles so it is necessary to specify when you want Squid Graph to start looking at your log files. This is done by specifying the --start option.
$ ./squid-graph --start=991353612 --output-dir=/var/www/re...
Likewise, you can specify the end time and Squid will automatically calculate the start time for you. This is done by specifying the --end command line option.
$ ./squid-graph --end=991352122 --output-dir=/var/www/re...
To get the last line of the Squid logfile, simply use tail -n1 logfile.log
Note that the start value is a numerical value which represents the number of seconds since 1970, NOT the conventional hh:mm:ss dd/mm/yyyy format. The reason why we did this is because Squid logs its time in this format, and we can easily use head -n1 logfile.log to view the first line of the log file to determine the start time.
Enhancements:
- Updated links after moving project to Sourceforge
- Updated links to incorrect GPL license in documentation
- Updated links to outdated GD Perl module
- Simplified package directory structure and removed old files
- No algorithm / logic changes

Simple Monitor is a SuperKaramba theme inspired by the simple but effective "Very Simple Monitors" theme by the user humanthing. Some values are not displayed properly though in Very Simple Monitors (network values and IP). This could be because of different setups. My computer is pretty standard so my theme should function properly on most pcs. http://www.kde-look.org/content/show.php?content=48973
I like a tight and clean desktop, so I simplified the idea even more. This theme is showing all basic information, and nothing more.
Main features:
- Processors type
- Processor speed
- Processor load (number and graph, for one proc)
- Processor Temperature
- Amount of ram used / amount of ram
- amount of swap used / amount of swap
- amound of HDD space used / amount of HDD space total (for "/root" and "/home")
- HDD temperatue (for "/hda", I could add another drive if requested)
- Computer name
- Computer ip
- Network load (up- and download, values and graph)
- Amount of transfered data thrue internet (up- and download) since last boot
Enhancements:
- Made the three blocks clickable.
- The CPU block opens Processor information
- The Memory block opens KsysGuard (youll need to have it installed to be able open it, obviously. Its in Kubuntu by default)
- the Network block opens your computers ip settings window
- Added a line for your computers uptime
- Changed font colors to very dark gray and very light gray, instead of black and white, to make it look softer.

DGS Graph was created to provide an easy to install graphing script, capable of generating graphs for web presentation.

XML::Simple is a easy API to maintain XML (esp config files).

SYNOPSIS

use XML::Simple;

my $ref = XMLin([< xml file or string >] [, < options >]);

my $xml = XMLout($hashref [, < options >]);

Or the object oriented way:

require XML::Simple;

my $xs = new XML::Simple(options);

my $ref = $xs->XMLin([< xml file or string >] [, < options >]);

my $xml = $xs->XMLout($hashref [, < options >]);

(or see "SAX SUPPORT" for the SAX way).

To catch common errors:

use XML::Simple qw(:strict);

Bio::ConnectDots::SimpleGraph is a simple, hopefully fast undirected graph package.

SYNOPSIS

use SimpleGraph;

my $graph=new Bio::ConnectDots::SimpleGraph;
# read pairs of nodes from STDIN
while () {
my($node1,$node2)=split;
$graph->add_edge($node1,$node2);
}
my @nodes=graph->nodes; # get list of nodes
my @edges=graph->edges; # get list of edges
for each $node (@nodes) {
my @neighbors=$node->neighbors; # get list of neighboring nodes
}

The only reason this exists is that the standard CPAN Graph pacakge, Graph::Base, is seriously broken. The package implements a small and eclectic assortment of standard graph algorithms that we happened to need for our applications.
This module is a subclass of Class::AutoClass (available at CPAN). AutoClass auotgenerates simple accessor and mutator methods (aka get and set methods). It also automates class initialization.

Nodes can be any Perl values, including object references. Edges are pairs of nodes.

(Caveat: be careful with values that contain embedded instances of $; (the character Perl uses to separate components of multi-dimensional subscripts), because we use this in the text representation of edges.

Python Call Graph (pycallgraph) is a Python library that creates call graphs for Python programs

pycallgraph is quite new. It seems to work well and I will most likely improve it in the near future!

Graph is a Perl module with graph data structures and algorithms.

SYNOPSIS

use Graph;
my $g0 = Graph->new; # A directed graph.

use Graph::Directed;
my $g1 = Graph::Directed->new; # A directed graph.

use Graph::Undirected;
my $g2 = Graph::Undirected->new; # An undirected graph.

$g->add_edge(...);
$g->has_edge(...)
$g->delete_edge(...);

$g->add_vertex(...);
$g->has_vertex(...);
$g->delete_vertex(...);

$g->vertices(...)
$g->edges(...)

Text::Graph is a Perl extension for generating text-based graphs.

SYNOPSIS

use Text::Graph;
blah blah blah

Some data is easier to analyze graphically than in its raw form. In many cases, however, a full-blown multicolor graphic representation is overkill. In these cases, a simple graph can provide an appropriate graphical representation.

The Text::Graph module provides a simple text-based graph of a dataset. Although this approach is not appropriate for all data analysis, it can be useful in some cases.