Free serial ws ftp home software for linux

Serial Over IP is a tool for the transport of serial interfaces over UDP/IP. It is very usefull for connecting distant equipment that run via a serial interfaces to a local computer.


One linux will be server and one will be client. On the server you can start the program typing the following command:

bash# serialoverip -d /dev/ttyS0 9600-8n1 -s 127.0.0.1 3000

... and on the client:

bash# serialoverip -c 127.0.0.1 3000 -d /dev/ttyS1 9600-8n1

In both commands the IP address is the server IP. Note that you have to start the server first, and it will be efectively be running only after the first packet received from the client.

The Asterisk@Home Linux Distribution project enables the home user to quickly set up a VOIP Asterisk PBX. A web GUI makes configuration and operation easy. We also provide an xPL (home automation) interface for easy interaction with other devices in the home.
Main features:
- Asterisk 1.0.9
- Flash Operator Panel 0.21
- Festival Speech Engine version 1.95
- weather agi scripts
- wakeup calls
- Integrated WebMeetMe GUI
- AMP-1.10.008
- CentOS 3.5
- SugarCRM with Cisco XML Services interface + Click to Dial
- Music On Hold (mpg123)
- Fax support (spanDSP)
- xPL support
- Digium card auto-config
AMP (Asterisk Management Portal)
- AMP is a web GUI that allows the configuration of Asterisk without the need for editing config files. If you use AMP be careful not to make manual changes to the config files that will affect AMP?s operation.
Flash Operator Panel
- Flash Operator Panel is a real-time web interface to Asterisk. You can see what all of your extensions, trunks, and conferences are doing. We have extension 200 set up for testing. This is a live extension and will work as soon as a phone is registered to ext 200. The rest of the buttons are dummy objects for examples.
- The op_buttons.conf file has all of the configs for each button in Flash Operator Panel you can edit this using the Config Edit button on the maint menu. You must reboot the Asterisk or restart the panel service after you make changes. The normal config files for Flash Operator Panel end in .cfg we changed them to .conf so they would match the other Asterisk files.
Cisco XML Services
- Asterisk@Home has a Cisco XML Services that can be used to look up contacts in a database. Click on Web Address Book from the Asterisk@Home main menu. (user: admin password: password) and enter all of your contacts and their phone numbers.
Music On Hold (mpg123)
- Asterisk@Home has now uses mpg123 for music on hold. Put a call on hold and they hear music not dead air!
Fax support (SpanDSP)
- SpanDSP allows Asterisk to receive faxes. You can set this up in AMP.

Pure FTP Manager allows a user to access multiple FTP chrooted sites with a single username and password. The program uses pure-ftpd and PostgreSQL for FTP and authentication. A site is chosen by adding @sitename to the users login

Distributed FTP is a distributed FTP daemon written in java. Instead of usual and well-known serversclient transfer it uses masterclient for control connections and slaveclient for (most) data transfers, the master must tell the slave to initiate/respond to a transfer.

auto_ftp.pl came to be because I wanted to make a ftp client daemon that could be loaded on a server. When you load this script, it will search for a shared folder for ftp transfers. Currently it will recreate folder and files on the remote site or just files. It also should transfer the file as ASCII or binary depending on the file type.
I do not have a install program as of yet. You must first change a few options in auto_ftp.pl and the conf file before you can use this program. More info can be found in each file. To install the
software move auto_ftp.pl to /sbin and them move auto_ftp.conf to /etc.
Also make sure that you use the following commands on the files.
chmod 700 /sbin/auto_ftp.pl
chmod 600 /etc/auto_ftp.conf
You must create this dir first
chmod 700 /tmp/ftp_tmp
You will also need to have libnet perl modules installed. They may
be downloaded from.
This is the version i used to write auto_ftp so it will work. If there
is anyproblems with newer versions please let me know.
Enhancements:
- Added a option for port for each site in the config file. If its not defined it will use 21 as the default. Also did some code cleanup.

AxY FTP is a Gtk based FTP client. AxY FTP can be build with either Motif or GTK+ 1.0/1.2 for interface.
Lesstif is also supported.

./configure
make
make install (or make install-strip)

Name of the executable is "axyftp".

You may want to run "./configure --help" first to learn about all available
options. One of the most important are:
--with-gui=GUI where GUI is either motif or gtk. By default, configure
script first searches for Motif installation and, if not
found, for GTK.
--with-help=DIR where DIR is a directory you want to have help files
installed into.

Please not that if you are building Motif version, CDE DtWidget library is
needed. Pretty workable clone is supplied with the distribution in case you
dont have one installed. Also, XmAxy library containing Notebook and enhanced
List Motif-based widgets is also supplied. Libraries are not installed by
default. Use "./configure --enable-install-dt --enable-install-xmaxy" to
install them.

Also, you may find various AxY FTP logo icons in XPM format in icons/
subdirectory.

Thin FTP Upload project is an FTP upload applet designed for integration with Web applications.
Do you want to quickly add FTP file upload functionality to your website? Then Thin FTP Applet, a product that can be installed in less than 2 minutes is the product to choose.
To send files using the File Transfer Protocol, all your users have to do is to drag and drop them onto the designated area of the browser. Entire directory tree and a virtually unlimited number of files totalling several giga bytes can be transfered in this manner.
If your server is configued to allow annoymous transfers your users dont even have to login. Else they can login interactively by entering their username and password. Or else you can make it easier for them by using a single predefined username and password for each user so that multiple accounts do not have to be created.
Whats New in 1.02 Stable Release:
- The new version of the applet aims for improved compatibility with a wider range of FTP servers, epecially those servers deployed on Windows.
- The new version includes a subtle change in the way that the applet handles the trailing slash in the URL.
Whats New in 2.0 Development Release:
- Interrupted FTP uploads can now be resumed.
- A new progress monitor has been added.
- The applet loading mechanism has been changed, and the applet can now be configured using HTML parameters.

slsnif is a serial line sniffer. It listens to the specified serial port and logs all data coming through it. slsnif works transparently for both the device connected to the serial port and the controlling software for this device. It operates by opening a pseudo tty (pty) and linking it to the actual serial port.
slsnif operates by opening a pty and linking it to the serial port. These are following parameters / options:
1. Serial port to open (required).
2. Name of the file to direct output to (optional, defaults to stdout).
3. Desired baudrate (optional, defaults to 9600 baud).
4. Timestamp On/Off (optional, defaults to Off).
5. Print ascii values in hex On/Off (optional, defaults to Off)
6. Print number of bytes transmitted On/Off (optional, defaults to Off).
7. Optional colors for timestamp, number of bytes transmitted and normal output.
8. Lock port On/Off (optional, defaults to On).
9. Use Unix98 ptys instead of BSD ptys (optional, defaults to BSD style).
10. Second serial port to open. If specified, this port will be used instead of a pty, thus providing an ability to log data between two serial ports.
Enhancements:
- Added ability to resynchronize ports at any time by sending a SIGUSR1 signal to slsnif. Useful for debugging applications that change port parameters mid-way, after starting the transmission. One example is pppd daemon, which sets initial parameters in the chat script, and changes them later, after chat script terminates.
- Added ability to use SYSV (Unix98) ptys instead of BSD ones (see -u and --unix98 parameters). This option can also be turned on/off from rc-file.