semtech touchscreen driver 1.0
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 3698
Semtech Touchscreen Driver 1.0
Semtech Touchscreen Driver is a driver on X for the Semtech Touchscreen. more>>
Semtech Touchscreen Driver is a driver on X for the Semtech Touchscreen as found on the GoBook III manufactured by Itronix.
It comes with a calibration program and has been tested on Linux 2.6.9.
You will need a kernel with the following options compiled.
CONFIG_SERIO_RAW=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
Next you will need to enable raw PS/2 reporting for the touchscreen. Type in the following command:
echo -n "serio_raw" > /sys/bus/serio/devices/serio1/driver
You should see the following message:
serio_raw: raw access enabled on isa0060/serio2 (serio_raw0, minor 1)
Compiling:
Type the following command to compile the driver:
make
Installing:
Do the following as root to install the driver:
make install
Configuration:
You will need to issue this command every time the computer starts so I suggest you stick somewhere in the initalization scripts.
Add a section in xorg.conf or XF86Config that looks like this:
Section "InputDevice"
Driver "semtech"
Identifier "Semtech Touchscreen"
Option "Device" "/dev/serio_raw0"
Option "DebugLevel" "0"
Option "CalibrateA" "-369046"
Option "CalibrateB" "1114"
Option "CalibrateC" "4893014"
Option "CalibrateD" "-2152"
Option "CalibrateE" "-282719"
Option "CalibrateF" "5331971"
Option "CalibrateDiv" "-359811"
EndSection
Note that the device can also be called /dev/psaux depending on your setup.
Start X and run the touchcal program to calibrate your screen. It will ouput the calibration information
There is also a program called touchcal.pl, it requires the Perl Tk toolkit. The program will write calibration information on your X configuration file.
<<lessIt comes with a calibration program and has been tested on Linux 2.6.9.
You will need a kernel with the following options compiled.
CONFIG_SERIO_RAW=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
Next you will need to enable raw PS/2 reporting for the touchscreen. Type in the following command:
echo -n "serio_raw" > /sys/bus/serio/devices/serio1/driver
You should see the following message:
serio_raw: raw access enabled on isa0060/serio2 (serio_raw0, minor 1)
Compiling:
Type the following command to compile the driver:
make
Installing:
Do the following as root to install the driver:
make install
Configuration:
You will need to issue this command every time the computer starts so I suggest you stick somewhere in the initalization scripts.
Add a section in xorg.conf or XF86Config that looks like this:
Section "InputDevice"
Driver "semtech"
Identifier "Semtech Touchscreen"
Option "Device" "/dev/serio_raw0"
Option "DebugLevel" "0"
Option "CalibrateA" "-369046"
Option "CalibrateB" "1114"
Option "CalibrateC" "4893014"
Option "CalibrateD" "-2152"
Option "CalibrateE" "-282719"
Option "CalibrateF" "5331971"
Option "CalibrateDiv" "-359811"
EndSection
Note that the device can also be called /dev/psaux depending on your setup.
Start X and run the touchcal program to calibrate your screen. It will ouput the calibration information
There is also a program called touchcal.pl, it requires the Perl Tk toolkit. The program will write calibration information on your X configuration file.
Download (0.12MB)
Added: 2005-11-23 License: MIT/X Consortium License Price:
813 downloads
Ethernet TAP driver 1.1
TAP provides packet reception and transmission for user-space programs. more>>
TAP provides packet reception and transmission for user-space programs. It can be viewed as a simple Ethernet device, which instead of receiving packets from a physical medium, receives them from a user-space program and instead of sending packets via physical media, writes them to the user-space program.
When a program opens /dev/tunX or /dev/tapX, driver creates and registers corresponding net device tunX or tapX. After a program closed above devices, driver will automatically delete tunXX or tapXX device and all routes corresponding to it.
This package(http://vtun.sourceforge.net/tun) contains two simple example programs that shows you how to use tun and tap devices. Both programs work like bridge between two network interfaces. br_select.c - bridge based on select system call. br_sigio.c - bridge based on async io and SIGIO signal. However the best example is VTun http://vtun.sourceforge.net
Enhancements:
- Massive Linux driver update: 2.4.x kernel support. New cloning interface, protocol indication. Statistics counting fixes.
- Solaris driver update: Correct Ethernet header substitution.
- Configure and Makefile updates. RPM package update.
- Documentation update.
<<lessWhen a program opens /dev/tunX or /dev/tapX, driver creates and registers corresponding net device tunX or tapX. After a program closed above devices, driver will automatically delete tunXX or tapXX device and all routes corresponding to it.
This package(http://vtun.sourceforge.net/tun) contains two simple example programs that shows you how to use tun and tap devices. Both programs work like bridge between two network interfaces. br_select.c - bridge based on select system call. br_sigio.c - bridge based on async io and SIGIO signal. However the best example is VTun http://vtun.sourceforge.net
Enhancements:
- Massive Linux driver update: 2.4.x kernel support. New cloning interface, protocol indication. Statistics counting fixes.
- Solaris driver update: Correct Ethernet header substitution.
- Configure and Makefile updates. RPM package update.
- Documentation update.
Download (0.006MB)
Added: 2006-07-04 License: GPL (GNU General Public License) Price:
1215 downloads
Logitech Quickcam express driver 0.6.4
This project is to produce drivers for the Logitech Quickam Express that will run popular linux software, such as video for linu more>>
This project is to produce drivers for the Logitech Quickam Express that will run popular linux software, such as video for linux.
This site hosts the Linux driver for the QuickCam Express and other QuickCam-related and QuickCam-compatible USB web cameras. The original work was done by Georg Acher and was known as qce-ga; Jean-Frederic Clere took that driver and created the first Video4Linux (V4L) driver, enabling popular V4L applications such as Xawtv to display pictures from the webcam. Since then, a group of developers around the world have evolved the driver into its current state, adding support for new cameras and chipsets as they have become available. In the process, the driver became known as qc-usb to reflect the fact that it supports a wide variety of USB-attached QuickCam cameras, not just the QuickCam Express.
The qc-usb driver supports the following webcams:
Dexxa Webcam
Labtec Webcam (old model)
LegoCam
Logitech QuickCam Express (old model)
Logitech QuickCam Notebook (some models)
Logitech QuickCam Web
Generally, any USB camera with a USB vendor ID of 0x46d and a USB product ID of 0x840, 0x850, or 0x870 (so, 0x46d:0x840, for example), should work. You can see the USB ID using operating system utilities such as lsusb in Linux.
<<lessThis site hosts the Linux driver for the QuickCam Express and other QuickCam-related and QuickCam-compatible USB web cameras. The original work was done by Georg Acher and was known as qce-ga; Jean-Frederic Clere took that driver and created the first Video4Linux (V4L) driver, enabling popular V4L applications such as Xawtv to display pictures from the webcam. Since then, a group of developers around the world have evolved the driver into its current state, adding support for new cameras and chipsets as they have become available. In the process, the driver became known as qc-usb to reflect the fact that it supports a wide variety of USB-attached QuickCam cameras, not just the QuickCam Express.
The qc-usb driver supports the following webcams:
Dexxa Webcam
Labtec Webcam (old model)
LegoCam
Logitech QuickCam Express (old model)
Logitech QuickCam Notebook (some models)
Logitech QuickCam Web
Generally, any USB camera with a USB vendor ID of 0x46d and a USB product ID of 0x840, 0x850, or 0x870 (so, 0x46d:0x840, for example), should work. You can see the USB ID using operating system utilities such as lsusb in Linux.
Download (0.14MB)
Added: 2006-07-18 License: GPL (GNU General Public License) Price:
758 downloads
HDBC PostgreSQL Driver 1.1.2.0
HDBC PostgreSQL Driver is the Haskell PostgreSQL backend driver for HDBC. more>>
HDBC PostgreSQL Driver is the Haskell PostgreSQL backend driver for HDBC.
Please see HDBC itself for documentation on use. If you dont already have it, you can browse this documentation at http://darcs.complete.org/hdbc/doc/index.html.
This package provides one function in module Database.HDBC.PostgreSQL:
{- | Connect to a PostgreSQL server.
See for the meaning of the connection string. -}
connectPostgreSQL :: String -> IO Connection
An example would be:
dbh<<less
Please see HDBC itself for documentation on use. If you dont already have it, you can browse this documentation at http://darcs.complete.org/hdbc/doc/index.html.
This package provides one function in module Database.HDBC.PostgreSQL:
{- | Connect to a PostgreSQL server.
See for the meaning of the connection string. -}
connectPostgreSQL :: String -> IO Connection
An example would be:
dbh<<less
Download (0.034MB)
Added: 2007-05-21 License: LGPL (GNU Lesser General Public License) Price:
886 downloads
HDBC ODBC Driver 1.0.1.1
HDBC ODBC Driver is the Haskell ODBC backend driver for HDBC. more>>
HDBC ODBC Driver is the Haskell ODBC backend driver for HDBC. This driver has been tested on Windows and on Linux with unixODBC. It should also be compatible with iODBC, though this has not been tested. It should be portable to any platform supported by both Haskell and unixODBC.
This driver is the preferred method of communicating with MySQL from Haskell.
MYSQL NOTE
Important note for MySQL users:
Unless you are going to use InnoDB tables, you are strongly encouraged to set
Option = 262144
in your odbc.ini (for Unix users), or to disable transaction support in your DSN setup for Windows users.
If you fail to do this, the MySQL ODBC driver will incorrectly state that it
supports transactions. dbTransactionSupport will incorrectly return True. commit and rollback will then silently fail. This is certainly /NOT/ what you want. It is a bug (or misfeature) in the MySQL driver, not in HDBC.
You should ignore this advice if you are using InnoDB tables.
<<lessThis driver is the preferred method of communicating with MySQL from Haskell.
MYSQL NOTE
Important note for MySQL users:
Unless you are going to use InnoDB tables, you are strongly encouraged to set
Option = 262144
in your odbc.ini (for Unix users), or to disable transaction support in your DSN setup for Windows users.
If you fail to do this, the MySQL ODBC driver will incorrectly state that it
supports transactions. dbTransactionSupport will incorrectly return True. commit and rollback will then silently fail. This is certainly /NOT/ what you want. It is a bug (or misfeature) in the MySQL driver, not in HDBC.
You should ignore this advice if you are using InnoDB tables.
Download (0.036MB)
Added: 2007-03-09 License: LGPL (GNU Lesser General Public License) Price:
959 downloads
Dell 1600n network scanner driver 1.2
Dell 1600n network scanner driver is a driver for network scanning using a Dell 1600n Printer/Scanner/Fax/Copier. more>>
Dell 1600n network scanner driver is a driver for network scanning using a Dell 1600n Printer/Scanner/Fax/Copier.
It is implemented as a Perl script. In principle, this means that it should be cross-platform.
It has been tested under Linux (Debian) and Windows (NT4 with Cygwin) on Intel. Supported formats are TIFF and JPEG. With an external program (e.g. ImageMagick convert), PDF is supported.
Main features:
- TIFF and JPEG network scanning using a Dell 1600n MFP.
- PDF scanning support via an external program (eg: ImageMagick convert)
<<lessIt is implemented as a Perl script. In principle, this means that it should be cross-platform.
It has been tested under Linux (Debian) and Windows (NT4 with Cygwin) on Intel. Supported formats are TIFF and JPEG. With an external program (e.g. ImageMagick convert), PDF is supported.
Main features:
- TIFF and JPEG network scanning using a Dell 1600n MFP.
- PDF scanning support via an external program (eg: ImageMagick convert)
Download (0.039MB)
Added: 2005-12-12 License: Freely Distributable Price:
823 downloads
Turtle Beach MultiSound Linux Drivers 0.9.0.0
The TB MultiSound Driver is a unified driver for the Turtle Beach Pinnacle, Fiji, Classic, Tahiti and Monterey soundcards. more>>
The TB MultiSound Driver is a unified driver for the Turtle Beach Pinnacle, Fiji, "Classic", Tahiti and Monterey soundcards.
This is similar to 0.8.3.1 but only for Linux 2.4, and includes MIDI support. Testing has been limited, but Pinnacle external MIDI should work. Most of the caveats listed below for the 2.2 version also apply here. Please send any feedback you have regarding this version. If you have a PnP machine and are using non-PnP mode, please try using resource exclusion for your ISA card in your systems BIOS. Not doing so can result in machine lockups during kernel module insertion, and other bizarre behaviour.
Note that some apps write with small buffer sizes (i.e. mpg123), so see if you can increase the apps buffer size if you have audio problems. For mpg123, try using -b 1024 if you experience audio trouble.
<<lessThis is similar to 0.8.3.1 but only for Linux 2.4, and includes MIDI support. Testing has been limited, but Pinnacle external MIDI should work. Most of the caveats listed below for the 2.2 version also apply here. Please send any feedback you have regarding this version. If you have a PnP machine and are using non-PnP mode, please try using resource exclusion for your ISA card in your systems BIOS. Not doing so can result in machine lockups during kernel module insertion, and other bizarre behaviour.
Note that some apps write with small buffer sizes (i.e. mpg123), so see if you can increase the apps buffer size if you have audio problems. For mpg123, try using -b 1024 if you experience audio trouble.
Download (0.041MB)
Added: 2006-07-28 License: GPL (GNU General Public License) Price:
702 downloads
Emulex Linux Drivers 2.6-8.1.1
Emulex Linux Drivers package provides the sources for Emulexs LPFC (LightPulse Fibre Channel) family of HBAs. more>>
Emulex Linux Drivers package provides the sources for Emulexs LPFC (LightPulse Fibre Channel) family of HBAs. The source base is developed and tested specifically for the 2.6 Linux kernel.
This Emulex driver is derived from Emulexs currently shipping driver which supports several application and storage providers.
Intentions:
Emulex will be working with the open source community with the intention of achieving acceptance of this source into the upstream kernel.
Emulex will also continue to work with application and storage provider partners, many of whom are active members of the open source community, to evolve the code base to meet both upstream kernel and continuing business needs.
Enhancements:
- Miscellaneous Cleanups
- Correct some 8bit to 16bit field conversions/comparisons
- Fixes for short cable pulls
- Adjust use of scsi_block_requests and interaction w/ FC transport
- Remove locking wrappers around error handlers
- Fixes to error handlers
- Add support for more members of the Light Pulse 11xxx (4Gb) family
- Bring model descriptions in sync with Emulex standard generic names.
- Add polled-mode support to the driver:
- Added code to adjust lun queue depth to avoid target overloading.
<<lessThis Emulex driver is derived from Emulexs currently shipping driver which supports several application and storage providers.
Intentions:
Emulex will be working with the open source community with the intention of achieving acceptance of this source into the upstream kernel.
Emulex will also continue to work with application and storage provider partners, many of whom are active members of the open source community, to evolve the code base to meet both upstream kernel and continuing business needs.
Enhancements:
- Miscellaneous Cleanups
- Correct some 8bit to 16bit field conversions/comparisons
- Fixes for short cable pulls
- Adjust use of scsi_block_requests and interaction w/ FC transport
- Remove locking wrappers around error handlers
- Fixes to error handlers
- Add support for more members of the Light Pulse 11xxx (4Gb) family
- Bring model descriptions in sync with Emulex standard generic names.
- Add polled-mode support to the driver:
- Added code to adjust lun queue depth to avoid target overloading.
Download (0.17MB)
Added: 2007-07-18 License: GPL (GNU General Public License) Price:
834 downloads
TechniSat Satellite TV-card Linux Driver 0.7.0
This driver gives you the capability to work with the MediaFocus Satellite TV card under Linux. more>>
This driver gives you the capability to work with the MediaFocus Satellite TV card under Linux. This driver contains modules for Zorans multimedia controller ZR36120/ZR36125, Micronas Intermetall Video Pixel Decoder VPX32XX series, Digital Radio Processor DRP3510 (astra digital radio decoder), Multistandard Sound Processor MSP3400 C, SGS Thompson Satellite Sound and Video Processor STV0030 and Mitels 2.6 GHz Synthesiser SP5055 (satellite tuner).
A satellite frequency table for xawtv is also included. In this table the 18/14V and 22kHz settings are placed within the frequency values. In order to avoid this dirty implementation two possible future ioctls for the v4l-API are proposed here.
The above mentioned driver was written for the ZR36120/ZR36125-based MediaFocus Sat-PC card. Nowadays TechniSat is selling a new MediaFocus card, which is based on the Philips SAA 7146 multimedia-chip. A driver for this card can be found on the official TechniSat MediafocusII website.
<<lessA satellite frequency table for xawtv is also included. In this table the 18/14V and 22kHz settings are placed within the frequency values. In order to avoid this dirty implementation two possible future ioctls for the v4l-API are proposed here.
The above mentioned driver was written for the ZR36120/ZR36125-based MediaFocus Sat-PC card. Nowadays TechniSat is selling a new MediaFocus card, which is based on the Philips SAA 7146 multimedia-chip. A driver for this card can be found on the official TechniSat MediafocusII website.
Download (0.094MB)
Added: 2006-07-20 License: GPL (GNU General Public License) Price:
1206 downloads
HDBC Sqlite3 Driver 1.0.1.0
HDBC Sqlite3 Driver is the Haskell Sqlite v3 backend driver for HDBC. more>>
HDBC Sqlite3 Driver is the Haskell Sqlite v3 backend driver for HDBC.
Please see HDBC itself for documentation on use. If you dont already
have it, you can browse this documentation at
http://darcs.complete.org/hdbc/doc/index.html.
This package provides one function in module Database.HDBC.Sqlite3:
{- | Connect to an Sqlite version 3 database. The only parameter needed is
the filename of the database to connect to.
All database accessor functions are provided in the main HDBC module. -}
connectSqlite3 :: FilePath -> IO Connection
<<lessPlease see HDBC itself for documentation on use. If you dont already
have it, you can browse this documentation at
http://darcs.complete.org/hdbc/doc/index.html.
This package provides one function in module Database.HDBC.Sqlite3:
{- | Connect to an Sqlite version 3 database. The only parameter needed is
the filename of the database to connect to.
All database accessor functions are provided in the main HDBC module. -}
connectSqlite3 :: FilePath -> IO Connection
Download (0.023MB)
Added: 2007-03-09 License: LGPL (GNU Lesser General Public License) Price:
961 downloads
ATA over Ethernet driver 49
ATA over Ethernet driver allows the Linux kernel to use the ATA over Ethernet (AoE) network protocol. more>>
ATA over Ethernet driver allows the Linux kernel to use the ATA over Ethernet (AoE) network protocol.
Using AoE, a Linux system can use AoE block devices like EtherDrive (R) storage blades.
The block devices appear as local device nodes (e.g. /dev/etherd/e0.0).
Enhancements:
- The driver now handles payloads larger than 4KiB, receives large packets without extra in-memory copy, and handles I/O requests so that the user can choose between the Linux I/O schedulers.
<<lessUsing AoE, a Linux system can use AoE block devices like EtherDrive (R) storage blades.
The block devices appear as local device nodes (e.g. /dev/etherd/e0.0).
Enhancements:
- The driver now handles payloads larger than 4KiB, receives large packets without extra in-memory copy, and handles I/O requests so that the user can choose between the Linux I/O schedulers.
Download (0.066MB)
Added: 2007-07-20 License: GPL (GNU General Public License) Price:
831 downloads
ALSA driver 1.0.14a
ALSA driver is an alternative implementation of Linux sound support. more>>
The Advanced Linux Sound Architecture is composed of several parts. The first is a fully modularized sound driver which supports module autoloading, devfs, isapnp autoconfiguration, and gives complete access to analog audio, digital audio, control, mixer, synthesizer, DSP, MIDI, and timer components of audio hardware.
It also includes a fully-featured kernel-level sequencer, a full compatibility layer for OSS/Free applications, an object-oriented C library which covers and enhances the ALSA kernel driver functionality for applications (client/server, plugins, PCM sharing/multiplexing, PCM metering, etc.), an interactive configuration program for the driver, and some simple utilities for basic management.
Main features:
- Efficient support for all types of audio interfaces, from consumer soundcards to professional multichannel audio interfaces.
- Fully modularized sound drivers.
- SMP and thread-safe design.
- User space library (alsa-lib) to simplify application programming and provide higher level functionality.
- Support for the older OSS API, providing binary compatibility for most OSS programs.
<<lessIt also includes a fully-featured kernel-level sequencer, a full compatibility layer for OSS/Free applications, an object-oriented C library which covers and enhances the ALSA kernel driver functionality for applications (client/server, plugins, PCM sharing/multiplexing, PCM metering, etc.), an interactive configuration program for the driver, and some simple utilities for basic management.
Main features:
- Efficient support for all types of audio interfaces, from consumer soundcards to professional multichannel audio interfaces.
- Fully modularized sound drivers.
- SMP and thread-safe design.
- User space library (alsa-lib) to simplify application programming and provide higher level functionality.
- Support for the older OSS API, providing binary compatibility for most OSS programs.
Download (2.3MB)
Added: 2007-06-11 License: GPL (GNU General Public License) Price:
869 downloads
Optimus OLED Keyboard Linux Driver 0.1.0
Optimus OLED Keyboard Linux Driver project is intended to provide a generic linux driver for OLED-based hardware. more>>
Optimus OLED Keyboard Linux Driver project is intended to provide a generic linux driver for OLED-based hardware made by Art. Lebedev Studio.
The current goal is to support the Optimus Mini Three keyboard.
Main features:
- Uses libusb to communicate with device (no specific kernel driver needed)
- As the kernel-provided module for pl2303 didnt work in our case, we recoded the driver with libusb
- Uses libpng to read PNG images, and display them
- Detects when a button is pressed
- Implements OLED_PROTOCOL_SET_IMAGE, OLED_PROTOCOL_POWER_ON, OLED_PROTOCOL_POWER_OFF, OLED_PROTOCOL_SHOW_OLED, OLED_PROTOCOL_GET_IDCODE, OLED_PROTOCOL_SET_IDCODE, OLED_PROTOCOL_SET_BRIGHTNESS.
- Support for more than one OLED Mini Three connected to the same computer
- All USB code is in a static library
Enhancements:
- One of the most annoying bugs (auto-switch-off of the key display after five seconds) has been fixed.
- Functions similar to the ones provided by the original Win32 library for image color settings are also available, allowing you to set color temperature and gamma.
- Theres better support for input, using threads as libusb only provides a blocking way to read data (or some bytes are missed).
<<lessThe current goal is to support the Optimus Mini Three keyboard.
Main features:
- Uses libusb to communicate with device (no specific kernel driver needed)
- As the kernel-provided module for pl2303 didnt work in our case, we recoded the driver with libusb
- Uses libpng to read PNG images, and display them
- Detects when a button is pressed
- Implements OLED_PROTOCOL_SET_IMAGE, OLED_PROTOCOL_POWER_ON, OLED_PROTOCOL_POWER_OFF, OLED_PROTOCOL_SHOW_OLED, OLED_PROTOCOL_GET_IDCODE, OLED_PROTOCOL_SET_IDCODE, OLED_PROTOCOL_SET_BRIGHTNESS.
- Support for more than one OLED Mini Three connected to the same computer
- All USB code is in a static library
Enhancements:
- One of the most annoying bugs (auto-switch-off of the key display after five seconds) has been fixed.
- Functions similar to the ones provided by the original Win32 library for image color settings are also available, allowing you to set color temperature and gamma.
- Theres better support for input, using threads as libusb only provides a blocking way to read data (or some bytes are missed).
Download (MB)
Added: 2006-10-18 License: GPL (GNU General Public License) Price:
1103 downloads
XOrg/XFree86 Synaptics TouchPad Driver 0.14.6
The XOrg/XFree86 Synaptics TouchPad Driver is a driver for Synaptics touchpads. more>>
XOrg/XFree86 Synaptics TouchPad Driver project is a driver for the Synaptics TouchPad for XOrg/XFree86 4.x.
A Synaptics touchpad by default operates in compatibility mode by emulating a standard mouse. However, by using a dedicated driver, more advanced features of the touchpad becomes available.
Main features:
- Movement with adjustable, non-linear acceleration and speed.
- Button events through short touching of the touchpad.
- Double-Button events through double short touching of the touchpad.
- Dragging through short touching and holding down the finger on the touchpad.
- Middle and right button events on the upper and lower corner of the touchpad.
- Vertical scrolling (button four and five events) through moving the finger on the right side of the touchpad.
- The up/down button sends button four/five events.
- Horizontal scrolling (button six and seven events) through moving the finger on the lower side of the touchpad.
- The multi-buttons send button four/five events, and six/seven events for horizontal scrolling.
- Adjustable finger detection.
- Multifinger taps: two finger for middle button and three finger for right button events. (Needs hardware support. Not all models implement this feature.)
- Run-time configuration using shared memory. This means you can change parameter settings without restarting the X server.
Enhancements:
- Support for xorg 7.1 has been added.
- A couple of minor build fixes for xorg 7.0 have been made.
<<lessA Synaptics touchpad by default operates in compatibility mode by emulating a standard mouse. However, by using a dedicated driver, more advanced features of the touchpad becomes available.
Main features:
- Movement with adjustable, non-linear acceleration and speed.
- Button events through short touching of the touchpad.
- Double-Button events through double short touching of the touchpad.
- Dragging through short touching and holding down the finger on the touchpad.
- Middle and right button events on the upper and lower corner of the touchpad.
- Vertical scrolling (button four and five events) through moving the finger on the right side of the touchpad.
- The up/down button sends button four/five events.
- Horizontal scrolling (button six and seven events) through moving the finger on the lower side of the touchpad.
- The multi-buttons send button four/five events, and six/seven events for horizontal scrolling.
- Adjustable finger detection.
- Multifinger taps: two finger for middle button and three finger for right button events. (Needs hardware support. Not all models implement this feature.)
- Run-time configuration using shared memory. This means you can change parameter settings without restarting the X server.
Enhancements:
- Support for xorg 7.1 has been added.
- A couple of minor build fixes for xorg 7.0 have been made.
Download (0.12MB)
Added: 2006-07-16 License: GPL (GNU General Public License) Price:
1203 downloads
MyHD/TL880 Linux Driver 0.2.0
MyHD/TL880 Linux Driver is a Linux driver for TL880-based HDTV tuner cards. more>>
MyHD/TL880 Linux Driver is a Linux driver for TL880-based HDTV tuner cards.
This is the development page for the Linux driver for the MyHD and other HDTV tuners based on the TL880 chip.
The driver is in early development stage right now, and we need lots of help testing. If you own any TL880-based card, please download the driver using the Downloads link at the left.
Keep in mind that the driver does not support video capture or playback at this time, but we need as many people as possible to run tests to help the driver move along.
<<lessThis is the development page for the Linux driver for the MyHD and other HDTV tuners based on the TL880 chip.
The driver is in early development stage right now, and we need lots of help testing. If you own any TL880-based card, please download the driver using the Downloads link at the left.
Keep in mind that the driver does not support video capture or playback at this time, but we need as many people as possible to run tests to help the driver move along.
Download (0.081MB)
Added: 2006-02-20 License: GPL (GNU General Public License) Price:
1342 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above semtech touchscreen driver 1.0 search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
