Free secret of eternia 0.3 software for linux

seccure toolset implements a selection of asymmetric algorithms based on elliptic curve cryptography (ECC). In particular it offers public key encryption / decryption and signature generation / verification.
ECC schemes offer a much better key size to security ratio than classical systems (RSA, DSA). Keys are short enough to make direct specification of keys on the command line possible (sometimes this is more convenient than the management of PGP-like key rings).
seccure builds on this feature and therefore is the tool of choice whenever lightweight asymmetric cryptography -- independent of key servers, revocation certificates, the Web of Trust or even configuration files -- is required.
Where can I download seccure?
seccure is GPL software. First download seccure from the following link. Then, after having made sure that libgcrypt is properly installed, run make and make install as usual.
How is seccure used?
First we give an example for key generation:
$ seccure-key
Assuming curve p160.
Enter private key: my private key
The public key is: 8W;>i^H0qi|J&$coR5MFpR*Vn
Then we do some public key encryption / decryption:
$ seccure-encrypt -o private.msg 8W;>i^H0qi|J&$coR5MFpR*Vn
Assuming MAC length of 80 bits.
Go ahead and type your message ...
This is a very very secret message!
^D
$ seccure-decrypt -i private.msg
Assuming MAC length of 80 bits.
Assuming curve p160.
Enter private key: my private key
This is a very very secret message!
Integrity check successful, message unforged!
At last we try out the signature generation / verification:
$ seccure-sign
Assuming curve p160.
Enter private key: my private key
Go ahead and type your message ...
This message will be signed
^D
Signature: !JI1%Luh6mu:@)S3wS.go(u1z,b.NhXIUI)/p@$*ONA+)+G}}_
$ seccure-verify 8W;>i^H0qi|J&$coR5MFpR*Vn !JI1%Luh6mu:@)S3wS.go(u1z,b.NhXIUI)/p@$*ONA+)+G}}_
Go ahead and type your message ...
This message will be signed
^D
Signature successfully verified!
Enhancements:
- This release adds signcryption and inline signatures.

Secret::Simple are secure secrets in configurations and code.

SYNOPSIS

# OOP style
my $ss = Secret::Simple->new();
my $ciphertext = $ss->encrypt($plaintext);
my $plaintext = $ss->decrypt($ciphertext);

# procedural style
my $ciphertext = ssencrypt($plaintext);
my $plaintext = ssdecrypt($ciphertext);

This module implements a straightforward interface for encrypting and decrypting secret information such as user IDs and passwords (e.g. database connection or remote account credentials). Secret::Simple can also be used on a limited basis to protect arbitrary data. By default the ciphertext returned is Base 64 encoded so as to be easily embedded within configurations or scripts.

A command-line utility called sstool is included to facilitate easy manipulation of cipher and plaintext snippets. The encryption mechanism utilizes the strong AES algorithm, so any weaknesses in Secret::Simple predominantly lie in how keys are protected. A balance must be struck between key accessibility, key protection, and overall complexity. The calling code can supply a key, series of keys, key files, or a combination. If no key information is explicitly passed, the module will attempt to use the OS users private SSH DSA key file by default if it exists.

The major goal of this module is to be as secure as possible while being simple and convenient enough to encourage its use. Psychology does factor in: simple is a very important consideration. If the security methods are too onerous or complicated to use, many sysadmins or developers may simply use plaintext (no protection other that OS file permissions) or simple ciphers like rot13. The security of the Secret::Simple method is not perfect, but it does represent a significant improvement over commonly-used nonsecure methods of embedding credentials and other secrets in Perl configurations and scripts. If used appropriately, Secret::Simple can greatly improve application and configuration security. Even so, care must always be taken to protect files and file permissions.

Keep It Secret! Keep It Safe! (KisKis) is an easy-to-use password manager written in JAVA. So it runs on any platform with an appropriate Java-Virtual-Machine available (Windows, Linux, Solaris, ...).

It allows the user to manage passwords for many different purposes such as
network or internet accounts, credit-card-pin-numbers and password-secured-files. The accounts can be grouped hierarchically within a tree structure.

Each account can be described by multiple attributes (user name, URL, ...) and comments. The history of each password change can be tracked. Users can define their own account templates. Multiple file-attachments can be added to each account.

All passwords are stored in a single XML-file encrypted by a single "master- password". The encryption algorithm suffices the OpenPGP-standard, so you can verify the implementation with GPG or PGP. That means: You dont just have to believe me that your secrets are kept safe.

New passwords can be generated automatically in two distinct ways. The first is a secure approach generating totally randomized passwords, the second generates much more readable passwords.

Net::SynchroEdit::Service is a Perl extension for SynchroEdit response service functionality.

SYNOPSIS

use Net::SynchroEdit::Service;

my $conn = new Net::SynchroEdit::Service;
$conn->connect("localhost", 7962, "root", "secret");

Net::SynchroEdit::Service provides a complete set of methods for manipulating a SynchroEdit server via the response service. The optional Net::SynchroEdit::Controller and Net::SynchroEdit::Session modules can be used in conjunction with the Service module to acquire e.g. the create_from_file method (Controller).

Data::Serializer package contains modules that serialize data structures.

SYNOPSIS

use Data::Serializer;

$obj = Data::Serializer->new();

$obj = Data::Serializer->new(
serializer => Storable,
digester => MD5,
cipher => DES,
secret => my secret,
compress => 1,
);

$serialized = $obj->serialize({a => [1,2,3],b => 5});
$deserialized = $obj->deserialize($serialized);
print "$deserialized->{b}n";

Provides a unified interface to the various serializing modules currently available. Adds the functionality of both compression and encryption.

EXAMPLES

Please see Data::Serializer::Cookbook(3)

METHODS

new - constructor
$obj = Data::Serializer->new();


$obj = Data::Serializer->new(
serializer => Data::Dumper,
digester => SHA-256,
cipher => Blowfish,
secret => undef,
portable => 1,
compress => 0,
serializer_token => 1,
options => {},
);

new is the constructor object for Data::Serializer objects.

The default serializer is Data::Dumper
The default digester is SHA-256
The default cipher is Blowfish
The default secret is undef
The default portable is 1
The default encoding is hex
The default compress is 0
The default compressor is Compress::Zlib
The default serializer_token is 1
The default options is {} (pass nothing on to serializer)
serialize - serialize reference

$serialized = $obj->serialize({a => [1,2,3],b => 5});

Serializes the reference specified.
Will compress if compress is a true value.
Will encrypt if secret is defined.
deserialize - deserialize reference

$deserialized = $obj->deserialize($serialized);

Reverses the process of serialization and returns a copy of the original serialized reference.

freeze - synonym for serialize
$serialized = $obj->freeze({a => [1,2,3],b => 5});

thaw - synonym for deserialize
$deserialized = $obj->thaw($serialized);

raw_serialize - serialize reference in raw form
$serialized = $obj->raw_serialize({a => [1,2,3],b => 5});

This is a straight pass through to the underlying serializer, nothing else is done. (no encoding, encryption, compression, etc)

raw_deserialize - deserialize reference in raw form
$deserialized = $obj->raw_deserialize($serialized);

This is a straight pass through to the underlying serializer, nothing else is done. (no encoding, encryption, compression, etc)

secret - specify secret for use with encryption
$obj->secret(mysecret);

Changes setting of secret for the Data::Serializer object. Can also be set in the constructor. If specified than the object will utilize encryption.

portable - encodes/decodes serialized data

Uses encoding method to ascii armor serialized data

Aids in the portability of serialized data.

compress - compression of data

Compresses serialized data. Default is not to use it. Will compress if set to a true value $obj->compress(1);

serializer - change the serializer

Currently have 8 supported serializers: Storable, FreezeThaw, Data::Denter, Config::General, YAML, PHP::Serialization, XML::Dumper, and Data::Dumper.
Default is to use Data::Dumper.

Each serializer has its own caveats about usage especially when dealing with cyclical data structures or CODE references. Please see the appropriate documentation in those modules for further information.

cipher - change the cipher method

Utilizes Crypt::CBC and can support any cipher method that it supports.

digester - change digesting method

Uses Digest so can support any digesting method that it supports. Digesting function is used internally by the encryption routine as part of data verification.

compressor - changes compresing module

This method is included for possible future inclusion of alternate compression method Currently Compress::Zlib is the only supported compressor.

encoding - change encoding method

Encodes data structure in ascii friendly manner. Currently the only valid options are hex, or b64.

The b64 option uses Base64 encoding provided by MIME::Base64, but strips out newlines.

serializer_token - add usage hint to data

Data::Serializer prepends a token that identifies what was used to process its data. This is used internally to allow runtime determination of how to extract Serialized data. Disabling this feature is not recommended.

options - pass options through to underlying serializer

Currently is only supported by Config::General, and XML::Dumper.

my $obj = Data::Serializer->new(serializer => Config::General,
options => {
-LowerCaseNames => 1,
-UseApacheInclude => 1,
-MergeDuplicateBlocks => 1,
-AutoTrue => 1,
-InterPolateVars => 1
},
) or die "$!n";

or

my $obj = Data::Serializer->new(serializer => XML::Dumper,
options => { dtd => 1, }
) or die "$!n";
store - serialize data and write it to a file (or file handle)
$obj->store({a => [1,2,3],b => 5},$file, [$mode, $perm]);

or

$obj->store({a => [1,2,3],b => 5},$fh);

Serializes the reference specified using the serialize method and writes it out to the specified file or filehandle.

If a file path is specified you may specify an optional mode and permission as the next two arguments. See IO::File for examples.

Trips an exception if it is unable to write to the specified file.

retrieve - read data from file (or file handle) and return it after deserialization

my $ref = $obj->retrieve($file);

or

my $ref = $obj->retrieve($fh);

Reads first line of supplied file or filehandle and returns it deserialized.

GREYCstoration is an image regularization algorithm which processes an image by locally removing small variations of pixel intensities while preserving significant global image features, such as sharp edges and corners.
The most direct application of image regularization is denoising. By extension, GREYCstoration can also be used to inpaint or resize images.
GREYCstoration is based on state-of-the-art methods using nonlinear multi-valued diffusion PDEs (Partial Differential Equations) for image regularization. This kind of method generally outperforms basic image filtering techniques (such as convolution, median filtering, etc.), classically encountered in painting programs.
Other image denoising plugins are available (for instance, Noise Ninja, Neat Image ) but are not free, and the corresponding algorithms are kept secret.
Enhancements:
- This release consumes far less memory than the previous version (2.4.2), so it can deal with very large images.
- There are now processing modes for 16-bit/components and 32-bit float-valued images, as well as multi-thread support.
- A brand new plug-in for the GIMP is provided.

Decilo Gratis is a Firefox extension that allows you to say what you want on decilogratis.com for free: just select in any web page the text you want to post on decilogratis, and then post it via right-click or Tools menu.

In decilogratis.com you can write all what you want, for example, what you think about something, what you are looking for buying or selling, a secret you want to share, or just tell to your girl/boyfriend how much you love her/him. You can have your own public blog here too, just write always under your own tag! Now, with this extension is easier to say something!