Free san disk software for linux

Super Grub Disk is a bootable floppy or CDROM that is oriented towards system rescue, specifically for repairing the booting process.

Super Grub Disk is simply a Grub Disk with a lot of useful menus.

It can activate partitions, boot partitions, boot MBRs, boot your former OS (Linux or another one) by loading menu.lst from your hard disk, automatically restore Grub on your MBR, swap hard disks in the BIOS, and boot from any available disk device.

Super Grub Disk project has multi-language support, and allows you to change the keyboard layout of your shell.

AppleII::Disk is a Perl module for block-level access to Apple II disk image files.

SYNOPSIS

use AppleII::Disk;
my $disk = AppleII::Disk->new(image.dsk);
my $data = $disk->read_block(1); # Read block 1
$disk->write_block(1, $data); # And write it back :-)

AppleII::Disk provides block-level access to the Apple II disk image files used by most Apple II emulators. (For information about Apple II emulators, try the Apple II Emulator Page at http://www.ecnet.net/users/mumbv/pages/apple2.shtml.) For a higher-level interface, use the AppleII::ProDOS module.
AppleII::Disk provides the following methods:

$disk = AppleII::Disk->new($filename, [$mode])

Constructs a new AppleII::Disk object. $filename is the name of the image file. The optional $mode is a string specifying how to open the image. It can consist of the following characters (case sensitive):

r Allow reads (this is actually ignored; you can always read)
w Allow writes
d Disk image is in DOS 3.3 order
p Disk image is in ProDOS order

If you dont specify d or p, then the format is guessed from the filename. .PO and .HDV files are ProDOS order, and anything else is assumed to be DOS 3.3 order.

If you specify w to allow writes, then the image file is created if it doesnt already exist.

$size = $disk->blocks([$newsize])

Gets or sets the size of the disk in blocks. $newsize is the new size of the disk in blocks. If $newsize is omitted, then the size is not changed. Returns the size of the disk image in blocks.

This refers to the logical size of the disk image. Blocks outside the physical size of the disk image read as all zeros. Writing to such a block will expand the image file.

When you create a new image file, you must use blocks to set its size before writing to it.

$contents = $disk->read_block($block)

Reads one block from the disk image. $block is the block number to read.
$contents = $disk->read_blocks(@blocks)

Reads a sequence of blocks from the disk image. @blocks is a reference to an array of block numbers. As a special case, block 0 cannot be read by this method. Instead, it returns a block full of 0 bytes. This is how sparse files are implemented. If you want to read the actual contents of block 0, you must call $disk->read_block(0) directly.

$contents = $disk->read_sector($track, $sector)

Reads one sector from the disk image. $track is the track number, and $sector is the DOS 3.3 logical sector number. This is currently implemented only for DOS 3.3 order images.

$disk->fully_allocate()

Expands the the physical size of the disk image file to match the logical size of the disk image. It will be expanded as a sparse file if the filesystem containing the image file supports sparse files.

$disk->write_block($block, $contents, [$pad])

Writes one block to the disk image. $block is the block number to write. $contents is the data to write. The optional $pad is a character to pad the block with (out to 512 bytes). If $pad is omitted or null, then $contents must be exactly 512 bytes.

$disk->write_blocks(@blocks, $contents, [$pad])

Writes a sequence of blocks to the disk image. @blocks is a reference to an array of block numbers to write. $contents is the data to write. It is broken up into 512 byte chunks and written to the blocks. The optional $pad is a character to pad the data with (out to a multiple of 512 bytes). If $pad is omitted or null, then $contents must be exactly 512 bytes times the number of blocks.

As a special case, block 0 cannot be written by this method. Instead, that block of $contents is just skipped. This is how sparse files are implemented. If you want to write the contents of block 0, you must call $disk->write_block directly.

$disk->write_sector($track, $sector, $contents, [$pad])

Writes one sector to the disk image. $track is the track number, and $sector is the DOS 3.3 logical sector number. $contents is the data to write. The optional $pad is a character to pad the sector with (out to 256 bytes). If $pad is omitted or null, then $contents must be exactly 256 bytes. This is currently implemented only for DOS 3.3 order images.

$padded = AppleII::Disk::pad_block($data, [$pad, [$length]])

Pads $data out to $length bytes with $pad. Returns the padded string; the original is not altered. Dies if $data is longer than $length. The default $pad is " ", and the default $length is 512 bytes.

If $pad is the null string (not undef), just checks to make sure that $data is exactly $length bytes and returns the original string. Dies if $data is not exactly $length bytes.

pad_block is a subroutine, not a method, and is not exported. You probably dont need to call it directly anyway, because the write_XXX methods will call it for you.

SLFFEA stands for San Les Free Finite Element Analysis. SLFFEA is a package of scientific software and graphical user interfaces for use in finite element analysis. It is written in ANSI C by San Le and distributed under the terms of the GNU license.
SLFFEA includes:
9 of the basic finite element types:
- 3-D 2 node beam
- 3-D 8 node brick
- 2-D 4 node plate
- 2-D 4 node quad (plane stress and plane strain)
- 3-D 4 node doubly curved shell (individual element defined by 4 or 8 nodes)
- 3-D 4 node tetrahedron
- 2-D 3 node triangle
- 3-D 2 node truss
- 3-D 6 node wedge
non-linear large deformation element:
- 3-D 8 node brick - Updated Lagrange formulation with Jaumann Stress Rate
And 1 thermal element:
- 3-D 8 node brick - It can handle thermal loads as well as orthotropy.
9 Graphical User Interfaces for each element type.
- Example of brick GUI
- Example of beam GUI
SLFFEA is dedicated to Richard Stallman , Granddaddy of the Free Software Movement, Linus Torvalds, its prodigal son, and everyone on comp.os.linux.setup .

XenMan is an intuitive GUI based Xen management tool covering all phases of the operational lifecycle.

XenMan should prove valuable to both Xen administrators and those seeking an introduction to Xen virtualization management.

When you start XenMan the first time, it will prompt you with a dialog box requesting you to specify.

Disk Location : The Doms can have disks supported by files in a file system. This is the directory where the disks for the doms would get created. Choose a directory with enough disk space. (few GB)

Snapshot Location : Xen supports saving a state of a running Virtual Machine and restoring it at a later time. The snapshot location is default directory where snapshot of running virtual machines would be stored. Again, choose a directory with enough disk space.(few GBs)

The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (SMART) built into most modern ATA and SCSI hard disks. In many cases, these utilities will provide advanced warning of disk degradation and failure.

The suite of smartmontools contains two utilities:

smartctl is a command line utility designed to perform S.M.A.R.T. tasks such as disk self-checks, and to report the S.M.A.R.T. status of the disk.

smartd is a daemon that periodically monitors S.M.A.R.T. status and reports errors and changes in S.M.A.R.T. attributes to syslog.

Disk Manager project is a simple filesystem configurator that allow you to:
- Automaticly detect new partitions at startup.
- Fully manage configuration of filesystem.
- Enable/disable write support for NTFS (need ntfs-3g installed).

Video Disk Recorder (VDR) is a digital satellite receiver program using Linux and DVB technologies. Video Disk Recorder can record MPEG2 streams, as well as output the stream to TV. It also supports plugins for DVD, DivX, or MP3 playback and more.
Main features:
- Operation entirely via DVB cards On Screen Display and infrared control (LIRC/RCU) or keyboard
- Support for multiple DVB cards (up to four, at least one full featured card with video out required) and "conditional access" (CICAM)
- Channel groups
- EPG display by channel or by time ("Whats on now/next")
- Timers: Programming via EPG or manually, priority/lifetime model, single-shot or repeating timers which use EPG subtitle info as recordings title additionally
- Recording storage on disk: Automatically splitting of recording into files (<<less