routers wood
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 302
Diet-Router 0.3
Diet-Router provides a singe floppy DSL router. more>>
Diet-Router provides a singe floppy DSL router.
Diet-Router is a Linux router that is small enough to fit on a single floppy disk. It focuses more on security than on functionality.
Diet-Router is a Linux router built with the dietlibc. It is small enough to fit on a single floppy disk. You may think that there are several other Linux routers, which come with more features and you are right. I build this router package more with the view on security than of functionality. So this project differs a lot from most other router or mini-Linux projects.
Main features:
- I use a 2.4.x kernel to have the great features of net-filter.
- I patch some net-filter extensions to have even more filter functions.
- I harden the kernel with the grsecurity kernel patch.
- Kernel modules are disabled.
- By default root login is disabled - even on the console.
How does it work:
First of all, all programs are linked statically. This is the main idea of this system. No libraries are needed. It uses busybox and tinylogin, two typical multi-call-binaries for small systems. The iptables, iptables-restore and iptables-save commands have been made a multi-call binary by me. The pppd and pppoe programs have only been patched to compile with the dietlibc. The minit and od_syslog are really small programs, from people with much more knowledge of programming than me. So, special thanks to Felix von Leitner, Olaf Drefs and all the dietlibc/libowfat programmers.
Enhancements:
- Updated dietlibc, libowfat, dropbear, ppp, kernel and grsecurity to recent
- versions.
- Added new packages dhcp server (udhcpd) and vi (e3).
- The build system has been completely rewritten and documented.
- It supports multiple downloads, a simple interface for package building/setup and target file descriptions including file owner and permissions.
- Some simple checks for build requirements are implementet.
- The setup is now able to configure mutiple network interfaces and also mproxy, udhcpd and dnscache can be configured for eachnetwork interface.
- All packages have at least two internet sources.
- Support for disc based target systems has been added.
<<lessDiet-Router is a Linux router that is small enough to fit on a single floppy disk. It focuses more on security than on functionality.
Diet-Router is a Linux router built with the dietlibc. It is small enough to fit on a single floppy disk. You may think that there are several other Linux routers, which come with more features and you are right. I build this router package more with the view on security than of functionality. So this project differs a lot from most other router or mini-Linux projects.
Main features:
- I use a 2.4.x kernel to have the great features of net-filter.
- I patch some net-filter extensions to have even more filter functions.
- I harden the kernel with the grsecurity kernel patch.
- Kernel modules are disabled.
- By default root login is disabled - even on the console.
How does it work:
First of all, all programs are linked statically. This is the main idea of this system. No libraries are needed. It uses busybox and tinylogin, two typical multi-call-binaries for small systems. The iptables, iptables-restore and iptables-save commands have been made a multi-call binary by me. The pppd and pppoe programs have only been patched to compile with the dietlibc. The minit and od_syslog are really small programs, from people with much more knowledge of programming than me. So, special thanks to Felix von Leitner, Olaf Drefs and all the dietlibc/libowfat programmers.
Enhancements:
- Updated dietlibc, libowfat, dropbear, ppp, kernel and grsecurity to recent
- versions.
- Added new packages dhcp server (udhcpd) and vi (e3).
- The build system has been completely rewritten and documented.
- It supports multiple downloads, a simple interface for package building/setup and target file descriptions including file owner and permissions.
- Some simple checks for build requirements are implementet.
- The setup is now able to configure mutiple network interfaces and also mproxy, udhcpd and dnscache can be configured for eachnetwork interface.
- All packages have at least two internet sources.
- Support for disc based target systems has been added.
Download (0.12MB)
Added: 2007-03-02 License: GPL (GNU General Public License) Price:
973 downloads
Net::BGP::Router 0.04
Net::BGP::Router is a BGP Router based on Net::BGP. more>>
Net::BGP::Router is a BGP Router based on Net::BGP.
SYNOPSIS
use Net::BGP::Router;
# Constructor
$router = new Net::BGP::Router(
Name => My very own router!,
Policy => new Net::BGP::Policy
);
# Accessor Methods
$router->add_peer($peer,both,$acl);
$router->remove_peer($peer,both);
$router->set_policy($policy);
$router->set_policy($peer,in,$acl);
__top
This module implement a BGP router. It uses Net::BGP objects for the BGP sessions and a Net::BGP::RIB object to store the routes. Policy are handled using a Net::BGP::Policy object.
<<lessSYNOPSIS
use Net::BGP::Router;
# Constructor
$router = new Net::BGP::Router(
Name => My very own router!,
Policy => new Net::BGP::Policy
);
# Accessor Methods
$router->add_peer($peer,both,$acl);
$router->remove_peer($peer,both);
$router->set_policy($policy);
$router->set_policy($peer,in,$acl);
__top
This module implement a BGP router. It uses Net::BGP objects for the BGP sessions and a Net::BGP::RIB object to store the routes. Policy are handled using a Net::BGP::Policy object.
Download (0.010MB)
Added: 2006-07-27 License: Perl Artistic License Price:
1189 downloads
IP accounter 1.01
IP accounter application measures and graphs traffic for IPv4 and IPv6 netfilter-based routers. more>>
IP accounter application measures and graphs traffic for IPv4 and IPv6 netfilter-based routers. Input data is accounted using several abstraction layers (routers, hosts, flows), and IPv6 traffic accounting may be mixed with IPv4.
Enhancements:
- The WEB frontend is still unavailable. There were some minor dificulties running ipaccounter. Still the main issue is when mysql server crashes. The traffic info is then lost until someone fixes it. Therefore it is advised to use some net watching software like Nagios. For further feature enchancements see the ChangeLog. 2006-09-02 by Ondra Ipaccounter-1.0 was released. Only WEB frontend is unavailable at the moment. The accounter is run on one machine. Namely maximus.spi-net.org. There were no fault ancountered so far, but its running only for one week.
<<lessEnhancements:
- The WEB frontend is still unavailable. There were some minor dificulties running ipaccounter. Still the main issue is when mysql server crashes. The traffic info is then lost until someone fixes it. Therefore it is advised to use some net watching software like Nagios. For further feature enchancements see the ChangeLog. 2006-09-02 by Ondra Ipaccounter-1.0 was released. Only WEB frontend is unavailable at the moment. The accounter is run on one machine. Namely maximus.spi-net.org. There were no fault ancountered so far, but its running only for one week.
Download (0.13MB)
Added: 2007-08-10 License: GPL (GNU General Public License) Price:
806 downloads
Prometheus QoS 0.7
Prometheus QoS is an ISP-oriented tool for easy manipulation of the IP traffic shaping and sharing features of the Linux kernel. more>>
QoS (or Quality-of-service) is traffic shaper replacement for Internet Service Providers (ISP). Dump your vintage hard-wired routers/shapers (C|sco, etc.) in favour of powerful open source and free solution !
Prometheus QoS generates multiple nested HTB tc classes with various rate and ceil values, and implements optional daily traffic quotas and data transfer statistics (as HTML). It is compatible with NAT, both asymetrical and symetrical, yet still provides good two-way shaping and prioritizing, both upload and download.
Prometheus QoS was written in C<<less
Prometheus QoS generates multiple nested HTB tc classes with various rate and ceil values, and implements optional daily traffic quotas and data transfer statistics (as HTML). It is compatible with NAT, both asymetrical and symetrical, yet still provides good two-way shaping and prioritizing, both upload and download.
Prometheus QoS was written in C<<less
Download (0.042MB)
Added: 2007-02-20 License: GPL (GNU General Public License) Price:
997 downloads
SIP Express Router 0.9.6
SIP Express Router is a very fast and flexible SIP (RFC3261) server. more>>
SIP Express Router (ser) is a high-performance, configurable, free SIP ( RFC3261 ) server .
SER features an application-server interface, presence support, SMS gateway, SIMPLE2Jabber gateway, RADIUS/syslog accounting and authorization, server status monitoring, FCP security, etc. Web-based user provisioning, serweb, available.
Its performance allows it to deal with operational burdens, such as broken network components, attacks, power-up reboots and rapidly growing user population.
SERs configuration ability meets needs of a whole range of scenarios including small-office use, enterprise PBX replacements and carrier services.
Main features:
- accounting
- digest authentication
- CPL scripts
- ENUM support
- instant messaging
- MySQL support
- PostgreSQL support
- a presence agent
- Radius authentication and accounting
- Diameter authentication
- record routing
- SMS gateway
- Jabber gateway
- NAT traversal support transaction module
- registrar
- user location
SER has been extensively and successfuly tested with many SIP products from other vendors (Microsoft, Cisco, Mitel, snom, Pingtel, Siemens, and many others). It has been powering our SIP services continuously for more than two years.
<<lessSER features an application-server interface, presence support, SMS gateway, SIMPLE2Jabber gateway, RADIUS/syslog accounting and authorization, server status monitoring, FCP security, etc. Web-based user provisioning, serweb, available.
Its performance allows it to deal with operational burdens, such as broken network components, attacks, power-up reboots and rapidly growing user population.
SERs configuration ability meets needs of a whole range of scenarios including small-office use, enterprise PBX replacements and carrier services.
Main features:
- accounting
- digest authentication
- CPL scripts
- ENUM support
- instant messaging
- MySQL support
- PostgreSQL support
- a presence agent
- Radius authentication and accounting
- Diameter authentication
- record routing
- SMS gateway
- Jabber gateway
- NAT traversal support transaction module
- registrar
- user location
SER has been extensively and successfuly tested with many SIP products from other vendors (Microsoft, Cisco, Mitel, snom, Pingtel, Siemens, and many others). It has been powering our SIP services continuously for more than two years.
Download (2.0MB)
Added: 2006-01-11 License: GPL (GNU General Public License) Price:
1393 downloads
Linux LiveCD Router 2.0.24
Linux LiveCD Router is a Linux distribution designed to share a broadband connection over WiFi. more>>
Linux LiveCD Router project allows you to share and firewall your broadband connection and use WIFI.
You can use DSL, ADSL, Cable Modem, T1, Fixed IPs, Dial-Up, WIFI, build you own Access Point and more.
Main features:
- Share and Firewall your broadband or dedicated Internet connection
- Includes Firewall Shorewall and Masquerading (NAT)
- Does not require any installation. It is a LiveCD, your computer simply boots straight from the CD. Does not require a hard disk
- Supports DSL, Cablemodem, Fixed IP and Dial-Up
- Traffic Control, QoS
- DHCP Client and Server
- Remote SSH administration
- Includes DNS Cache to accelerate surfing
- Includes SNMP Monitoring, MRTG graphical statistics
- Use standard and low cost computer, networking and wifi hardware (also USB)
- Can use multiple ethernet and wifi 802.11a/b/g cards. Supports PCI, USB and PCMCIA cards (can replace external Access Points!)
- Linux Software compatible with Windows and Mac Networks
<<lessYou can use DSL, ADSL, Cable Modem, T1, Fixed IPs, Dial-Up, WIFI, build you own Access Point and more.
Main features:
- Share and Firewall your broadband or dedicated Internet connection
- Includes Firewall Shorewall and Masquerading (NAT)
- Does not require any installation. It is a LiveCD, your computer simply boots straight from the CD. Does not require a hard disk
- Supports DSL, Cablemodem, Fixed IP and Dial-Up
- Traffic Control, QoS
- DHCP Client and Server
- Remote SSH administration
- Includes DNS Cache to accelerate surfing
- Includes SNMP Monitoring, MRTG graphical statistics
- Use standard and low cost computer, networking and wifi hardware (also USB)
- Can use multiple ethernet and wifi 802.11a/b/g cards. Supports PCI, USB and PCMCIA cards (can replace external Access Points!)
- Linux Software compatible with Windows and Mac Networks
Download (MB)
Added: 2007-06-20 License: GPL (GNU General Public License) Price:
888 downloads
Other version of Linux LiveCD Router
Linux LiveCD Router Documentation package contains documentation for ... LiveCD Router. Linux LiveCD Router allows you to share and firewall your broadband connectionLicense:GPL (GNU General Public License)
Popper 1.0
Popper is a small and simple solution to messaging between Linux and Windows-based machines. more>>
Popper is a small and simple solution to messaging between Linux and Windows-based machines.
It sits quietly in the system tray and pops up a message should one be received from a computer on the network.
All 32-bit Windows variants come with some sort of messaging program compatible with these kind of messages, and there are several available for Linux.
Samba provides the neccessary magic of sending and receiving.
Enhancements:
- Fixed problems with changing workgroup.
- Aded configurable initial search host.
<<lessIt sits quietly in the system tray and pops up a message should one be received from a computer on the network.
All 32-bit Windows variants come with some sort of messaging program compatible with these kind of messages, and there are several available for Linux.
Samba provides the neccessary magic of sending and receiving.
Enhancements:
- Fixed problems with changing workgroup.
- Aded configurable initial search host.
Download (0.34MB)
Added: 2006-09-08 License: GPL (GNU General Public License) Price:
1142 downloads
OBpager 1.8
BPager is a lightweight pager designed to be used with NetWM-compliant window managers like OpenBox. more>>
BPager is a lightweight pager designed to be used with NetWM-compliant window managers like OpenBox.
Unlike many other pagers out there, OBPager has very few dependencies, requiring only Xlib and glibc++ (no Gnome or KDE necessary).
Usage:
OBPager is pretty straightforward in terms of usage. It correctly displays the windows of a virtual desktop, indicates which is the active desktop, and allows you to switch desktops by clicking on the dockapp.
The command line syntax for obpager is:
obpager [--activefont < fontname >] [--inactivefont < fontname >] [desktop-number]
If no desktop number is specified, an instance of obpager for each virtual desktop is automatically created.
<<lessUnlike many other pagers out there, OBPager has very few dependencies, requiring only Xlib and glibc++ (no Gnome or KDE necessary).
Usage:
OBPager is pretty straightforward in terms of usage. It correctly displays the windows of a virtual desktop, indicates which is the active desktop, and allows you to switch desktops by clicking on the dockapp.
The command line syntax for obpager is:
obpager [--activefont < fontname >] [--inactivefont < fontname >] [desktop-number]
If no desktop number is specified, an instance of obpager for each virtual desktop is automatically created.
Download (0.023MB)
Added: 2006-11-14 License: GPL (GNU General Public License) Price:
1077 downloads
BitWise Routing Server for Linux 1.7
allows you to accept BitWise connections to multiple computers behind a router. more>> The BitWise Routing Server allows you to accept BitWise connections to multiple computers behind a router. Typically, using a router, you would set up port forwarding on BitWises client port (4137), and specify a single destination IP. This is fine until multiple users behind a router all need to accept incoming connections.
As shown by the picture at right, the Routing Server allows individual users to register themselves with the Routing Server, and then the Routing Server accepts all incoming connections and directs those connections to the appropriate user.
The Routing Server requires that your physical router support port forwarding with a way to specify different external and internal ports (this is sometimes labeled "UPnP" by many common home routers).<<less
Download (1011KB)
Added: 2009-04-20 License: Freeware Price: Free
187 downloads
ROSInfo 1.13
ROSInfo is a simple tool for monitoring signal levels, traffic, and network latency of x86 machines. more>>
ROSInfo is a simple tool for monitoring signal levels, traffic, and network latency of x86 machines, RouterBoards, and other devices running Mikrotik RouterOS.
The project was designed to be used with Mikrotik RouterOS 2.9 and is being developed and tested on a large network with many Mikrotik routers.
Currently supported and tested are all versions of Mikrotik RouterOS 2.9.
<<lessThe project was designed to be used with Mikrotik RouterOS 2.9 and is being developed and tested on a large network with many Mikrotik routers.
Currently supported and tested are all versions of Mikrotik RouterOS 2.9.
Download (0.074MB)
Added: 2006-12-08 License: GPL (GNU General Public License) Price:
1081 downloads
Web Site Robot 2.4
Web Site Robot is an easy to use Web site builder with a blog tool. more>>
Web Site Robot is an easy to use Web site builder with a blog tool, shopping cart, and online photo album. It is free and does not require additional software, HTML, programming, or a hosting company.
It enables secure online payments with credit cards. There is virtually unlimited storage space for HTML, documents, blogs, photos, music, videos, or any multimedia content.
Enhancements:
- The Robot is now able to discover and inform UPnP routers about its presence and the need to have a NAT port available for its Web server.
- In most SOHO environments with UPnP enabled routers, manual configuration is not needed.
- The operator just installs, registers the Robot and the Web site is online effortlessly.
<<lessIt enables secure online payments with credit cards. There is virtually unlimited storage space for HTML, documents, blogs, photos, music, videos, or any multimedia content.
Enhancements:
- The Robot is now able to discover and inform UPnP routers about its presence and the need to have a NAT port available for its Web server.
- In most SOHO environments with UPnP enabled routers, manual configuration is not needed.
- The operator just installs, registers the Robot and the Web site is online effortlessly.
Download (26MB)
Added: 2005-09-13 License: Freeware Price:
3097 downloads
Stunner 0.0.5
Stunner is an RFC 3489 STUN server and client for Unix and Unix-line operating systems. more>>
Stunner is an RFC 3489 STUN server and client for Unix and Unix-line operating systems. Stunner aims to adhere closely to the RFC.
The STUN protocol is used to help clients who are located behind network-address translating (NAT) routers determine the sort of NAT being used. It is commonly used as part of Voice-over-IP (VoIP) systems.
<<lessThe STUN protocol is used to help clients who are located behind network-address translating (NAT) routers determine the sort of NAT being used. It is commonly used as part of Voice-over-IP (VoIP) systems.
Download (0.011MB)
Added: 2006-09-18 License: GPL (GNU General Public License) Price:
1134 downloads
WWW::Scraper::Monster 0.01
WWW::Scraper::Monster is a Perl module that scrapes Monster.com. more>>
WWW::Scraper::Monster is a Perl module that scrapes Monster.com.
SYNOPSIS
use WWW::Search;
my $oSearch = new WWW::Search(Monster);
my $sQuery = WWW::Search::escape_query("unix and (c++ or java)");
$oSearch->native_query($sQuery,
{st => CA,
tm => 14d});
while (my $res = $oSearch->next_result()) {
print $res->company . "t" . $res->title . "t" . $res->change_date
. "t" . $res->location . "t" . $res->url . "n";
}
This class is a Monster specialization of WWW::Search. It handles making and interpreting Monster searches at http://www.monster.com. Monster supports Boolean logic with "and"s "or"s. See http://jobsearch.monster.com/jobsearch_tips.asp for a full description of the query language.
The returned WWW::Scraper::Response objects contain url, title, company, location and change_date fields.
<<lessSYNOPSIS
use WWW::Search;
my $oSearch = new WWW::Search(Monster);
my $sQuery = WWW::Search::escape_query("unix and (c++ or java)");
$oSearch->native_query($sQuery,
{st => CA,
tm => 14d});
while (my $res = $oSearch->next_result()) {
print $res->company . "t" . $res->title . "t" . $res->change_date
. "t" . $res->location . "t" . $res->url . "n";
}
This class is a Monster specialization of WWW::Search. It handles making and interpreting Monster searches at http://www.monster.com. Monster supports Boolean logic with "and"s "or"s. See http://jobsearch.monster.com/jobsearch_tips.asp for a full description of the query language.
The returned WWW::Scraper::Response objects contain url, title, company, location and change_date fields.
Download (0.038MB)
Added: 2007-06-14 License: Perl Artistic License Price:
862 downloads
Gnome Control Center 2.19.6
Gnome Control Center is GNOMEs main interface for configuration of various aspects of your desktop. more>>
Gnome Control Center is GNOMEs main interface for configuration of various aspects of your desktop.
Enhancements:
about-me:
- Add a tooltip to the image button to make it accessible (Jens Granseuer)
appearance:
- Add option to add wallpapers via the command line (Jens Granseuer) (#456337)
- Use new GTK+ convenience API for icon view tooltips (Matthias Clasen)
(#455985)
- Bump all tooltips code to GTK 2.11.6 (Jens Granseuer)
- Improve color scheme matching (Jens Granseuer)
- When reading current settings from gconf, get the color scheme from the
GTK theme if necessary to allow matching against themes retrieved via
gnome-theme-info (Jens Granseuer)
- Implement saving of the cursor theme name in metathemes and add a
Default pointer option to the cursor theme list (Denis Washington)
- Simplify tooltip descriptions (Dennis Cranston) (#460111)
- Really unset the gconf key when reverting colors (Jens Granseuer)
- Implement drag-and-drop theme installation (Denis Washington)
- Remove workarounds for initialization problems in early versions of the
capplet (Jens Granseuer)
- Fix cell renderer state logic to not always be on (Jens Granseuer)
- Use cairo to draw the cell renderer selection (Thomas Wood)
- Show readable_name in cursor theme list instead of name (Denis Washington)
- Fix mnemonics and customize theme window title (Thomas Wood) (#461255)
- Fix theme installation (Thomas Wood)
- Update icon cache when installing icon themes (Thomas Wood) (#355486)
- Prevent some memory leaks (Thomas Wood)
- Add controls for applying suggested backgrounds and/or fonts from
metathemes (Denis Washington)
- Only show background/font suggestions if they havent already been
applied (Denis Washington)
- Cope with unset gconf keys and group gconf notifications (Jens Granseuer)
- Only create the custom theme entry when changes are made, and delete it
when the theme is saved (Jens Granseuer)
- Add %F to the exec line so external programs like epiphany can set the
background (Jens Granseuer) (#456337)
- Default to showing the background tab if wallpapers were given on the
command line (Jens Granseuer)
- Use our custom cell renderer for metathemes too, so the previews dont
get shaded (Jens Granseuer) (#461198)
default applications:
- Change custom command entries to be insensitive instead of
noneditable (Matthias Clasen) (#456308)
- Remove spurious desktop entries (Jens Granseuer) (#444787)
keyboard:
- Improved layout and sorting (Sergey Udaltsov) (#455353)
- Implement DND in the selected layouts list (Sergey Udaltsov) (#351936)
- Eliminate up/down buttons in the layout list (Sergey Udaltsov)
network:
- Also use new icon in the window title bar (Denis Washington)
settings daemon:
- Dont forget the Xft callback (Jens Granseuer) (#455992)
themus:
- Update to match theme callback signature (Jens Granseuer)
general:
- Fix crash when no cursor is specified in theme (Frederic Crozat) (#455952)
- General cleanup and leak-plugging (Jens Granseuer, Thomas Wood)
- Dont fail configuring if gstreamer is not available, simply skip the sound
capplet (Jens Granseuer) (#456957)
- Remove spurous AT desktop entries (Jens Granseuer) (#444787)
- Add support for custom theme names saved in metathemes (Denis Washington)
- Re-add basic support for cursor themes for X servers without the Xcursor
extension, like the one in Solaris (Denis Washington)
- When applying a metatheme, check wether to set/unser color scheme gconf
key (Jens Granseuer) (#421866)
- Fix notification of selection changed for GtkTreeView config support (Jens
Granseuer)
- Prevent cursor themes from being recognized as icon themes (Denis Washington)
- Read a cursor themess name from its index.theme file if it has one (Denis
Washington)
- Expand check for empty metatheme color scheme to include blank color scheme
strings (Thomas Wood)
- Add tooltip foreground and background colors to the list of recognized
symbolic colors (Thomas Wood)
updated translations:
- es (Jorge Gonzalez)
- et (Priit Laes)
- fi (Ilkka Tuohela)
- gl (Ignacio Casal Quinteiro)
- gu (Ankit Patel)
- hu (Gabor Kelemen)
- ja (Takeshi AIHANA)
- lt (Zygimantas Berucka)
- nb (Kjartan Maraas)
- nl (Vincent van Adrighem)
- sv (Daniel Nylander)
- th (Theppitak Karoonboonyanan)
- zh_CN (Funda Wang)
<<lessEnhancements:
about-me:
- Add a tooltip to the image button to make it accessible (Jens Granseuer)
appearance:
- Add option to add wallpapers via the command line (Jens Granseuer) (#456337)
- Use new GTK+ convenience API for icon view tooltips (Matthias Clasen)
(#455985)
- Bump all tooltips code to GTK 2.11.6 (Jens Granseuer)
- Improve color scheme matching (Jens Granseuer)
- When reading current settings from gconf, get the color scheme from the
GTK theme if necessary to allow matching against themes retrieved via
gnome-theme-info (Jens Granseuer)
- Implement saving of the cursor theme name in metathemes and add a
Default pointer option to the cursor theme list (Denis Washington)
- Simplify tooltip descriptions (Dennis Cranston) (#460111)
- Really unset the gconf key when reverting colors (Jens Granseuer)
- Implement drag-and-drop theme installation (Denis Washington)
- Remove workarounds for initialization problems in early versions of the
capplet (Jens Granseuer)
- Fix cell renderer state logic to not always be on (Jens Granseuer)
- Use cairo to draw the cell renderer selection (Thomas Wood)
- Show readable_name in cursor theme list instead of name (Denis Washington)
- Fix mnemonics and customize theme window title (Thomas Wood) (#461255)
- Fix theme installation (Thomas Wood)
- Update icon cache when installing icon themes (Thomas Wood) (#355486)
- Prevent some memory leaks (Thomas Wood)
- Add controls for applying suggested backgrounds and/or fonts from
metathemes (Denis Washington)
- Only show background/font suggestions if they havent already been
applied (Denis Washington)
- Cope with unset gconf keys and group gconf notifications (Jens Granseuer)
- Only create the custom theme entry when changes are made, and delete it
when the theme is saved (Jens Granseuer)
- Add %F to the exec line so external programs like epiphany can set the
background (Jens Granseuer) (#456337)
- Default to showing the background tab if wallpapers were given on the
command line (Jens Granseuer)
- Use our custom cell renderer for metathemes too, so the previews dont
get shaded (Jens Granseuer) (#461198)
default applications:
- Change custom command entries to be insensitive instead of
noneditable (Matthias Clasen) (#456308)
- Remove spurious desktop entries (Jens Granseuer) (#444787)
keyboard:
- Improved layout and sorting (Sergey Udaltsov) (#455353)
- Implement DND in the selected layouts list (Sergey Udaltsov) (#351936)
- Eliminate up/down buttons in the layout list (Sergey Udaltsov)
network:
- Also use new icon in the window title bar (Denis Washington)
settings daemon:
- Dont forget the Xft callback (Jens Granseuer) (#455992)
themus:
- Update to match theme callback signature (Jens Granseuer)
general:
- Fix crash when no cursor is specified in theme (Frederic Crozat) (#455952)
- General cleanup and leak-plugging (Jens Granseuer, Thomas Wood)
- Dont fail configuring if gstreamer is not available, simply skip the sound
capplet (Jens Granseuer) (#456957)
- Remove spurous AT desktop entries (Jens Granseuer) (#444787)
- Add support for custom theme names saved in metathemes (Denis Washington)
- Re-add basic support for cursor themes for X servers without the Xcursor
extension, like the one in Solaris (Denis Washington)
- When applying a metatheme, check wether to set/unser color scheme gconf
key (Jens Granseuer) (#421866)
- Fix notification of selection changed for GtkTreeView config support (Jens
Granseuer)
- Prevent cursor themes from being recognized as icon themes (Denis Washington)
- Read a cursor themess name from its index.theme file if it has one (Denis
Washington)
- Expand check for empty metatheme color scheme to include blank color scheme
strings (Thomas Wood)
- Add tooltip foreground and background colors to the list of recognized
symbolic colors (Thomas Wood)
updated translations:
- es (Jorge Gonzalez)
- et (Priit Laes)
- fi (Ilkka Tuohela)
- gl (Ignacio Casal Quinteiro)
- gu (Ankit Patel)
- hu (Gabor Kelemen)
- ja (Takeshi AIHANA)
- lt (Zygimantas Berucka)
- nb (Kjartan Maraas)
- nl (Vincent van Adrighem)
- sv (Daniel Nylander)
- th (Theppitak Karoonboonyanan)
- zh_CN (Funda Wang)
Download (3.3MB)
Added: 2007-08-01 License: LGPL (GNU Lesser General Public License) Price:
815 downloads
EtherPuppet 0.2
EtherPuppet will create a virtual interface (TUN/TAP) between two machines through a TCP connection. more>>
EtherPuppet will create a virtual interface (TUN/TAP) between two machines through a TCP connection.
Everything seen by the real interface will be seen by the virtual one.
Everything sent to the virtual interface will be emitted by the real one.
It has been designed because one often has a small machine as his Internet gateway, and sometimes want to run some big applications that need raw access to this interface, for sniffing (Ethereal, etc.) or for crafting packets that do not survive being reassembled, NATed, etc.
It can even run on Linux embedded routers such as the Linksys WRT54G.
Compiling:
$ gcc -o etherpuppet etherpuppet.c
<<lessEverything seen by the real interface will be seen by the virtual one.
Everything sent to the virtual interface will be emitted by the real one.
It has been designed because one often has a small machine as his Internet gateway, and sometimes want to run some big applications that need raw access to this interface, for sniffing (Ethereal, etc.) or for crafting packets that do not survive being reassembled, NATed, etc.
It can even run on Linux embedded routers such as the Linksys WRT54G.
Compiling:
$ gcc -o etherpuppet etherpuppet.c
Download (0.014MB)
Added: 2006-09-11 License: GPL (GNU General Public License) Price:
1141 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above routers wood search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
