revamp
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 29
Grafpup 2.00
Grafpup Linux is a desktop Linux operating system based closely on Puppy Linux. more>>
Grafpup Linux is a desktop Linux operating system based closely on Puppy Linux. Grafpups goal is to be as useful to graphic designers and other imaging professionals as possible while still remaining extremely small and fast. How small?
Grafpup is a live cd of only 72mb with current versions of Gimp, Cinepaint, Inkscape, and Scribus. You will be amazed at how much is in there for the size. You will also be amazed at how fast everything runs.
Running from the live cd, the entire operating system loads into ram, including all of the applications. This means that your programs start without any hesitation and respond instantly to your input. Unlike some live cds, however, you dont have to reconfigure every time you reboot.
Grafpup saves all of your settings into a file called pup101 on your hard drive. This file contains your entire home directory, plus any additional programs that you wish to install. Grafpup is also very user friendly, with wizards for doing most system tasks like connecting to the internet and installing to hard disk or usb drive.
There is also a powerful package management system, pupget, with a very extensive and ever increasing list of additional packages available for easy installation. An additional package installer, dotpup, offers single click installation of a long list of software. In other words this is much more than a garden variety live cd. It is capable of being your main operating system and extensible enough to satisfy just about anyone.
How is all of this accomplished? I wish I could take all of the credit but I really have to take my hat off to the developer of Puppy Linux, Barry Kauler. Puppy (and Grafpup) uses the squash filesystem method of compression to reduce the size of the cd image by about two thirds. Then, through the magic of unionfs the whole filesystem becomes writeable again.
For a full explanation please go to the Puppylinux website, www.puppylinux.org. Another aspect of the incredible size to utility ratio is the careful selection of applications that goes into Puppy and has made its way into Grafpup. Applications are chosen for speed and simplicity, avoiding bulky and wasteful code. Grafpup uses icewm as its default (and only) window manager.
KDE or Gnome arent even considered. Opera is used as the default browser and email client, instead of the common combination of Firefox and Thunderbird which would be half again as large. Though small, you will find that ROX-filer is one of the best filemanagers that you will ever use. It just plain works. I have further cut down in certain other areas in order to leave room for some serious heavy duty graphics applications.
Even though things are cut down, you will find that Grafpup is a fairly complete operating system and most tasks can be completed without the need for additional software. You will be able to browse the web, send and recieve email, write and print documents, organize your digital photos, and watch dvd movies and video off the internet.
You will also be able to burn cds and dvds, create impressive graphics and animations, put together professional looking web pages, and create press-ready brochures or other materials for print. And Im talking about the live cd without any additional software.
Visit the Grafpup and Puppy package repositories and you can unlock as much potential as any of the most popular Linux distros out there. There you will find such powerful software as OpenOffice and the Seamonkey internet suite. You can create 3d graphics using Blender, or even install and run a large selection of Windows software using Wine.
Try it and see for yourself. Since it is a live cd there is very little, if any, risk involved. I believe you will be pleasantly surprised at what can be done using such a tiny system.
Enhancements:
- Grafpup 2.00 (final) is officially on the mirrors. This release comes with some really bleeding edge features when compared with previous versions, such as a 2.6.20.2 kernel, revamped package management with dependency resolution, GIMP 2.3.14, Cinepaint 0.22 with the Ufraw plug-in, a brand new control panel, cdrkit replacing cdrtools, Openbox replacing IceWM, and a host of other changes. In addition to the light-weight Openbox desktop, you can also easily download and install both Xfce and KDE. The software repository has blown up to include over 1,100 titles (and counting).
<<lessGrafpup is a live cd of only 72mb with current versions of Gimp, Cinepaint, Inkscape, and Scribus. You will be amazed at how much is in there for the size. You will also be amazed at how fast everything runs.
Running from the live cd, the entire operating system loads into ram, including all of the applications. This means that your programs start without any hesitation and respond instantly to your input. Unlike some live cds, however, you dont have to reconfigure every time you reboot.
Grafpup saves all of your settings into a file called pup101 on your hard drive. This file contains your entire home directory, plus any additional programs that you wish to install. Grafpup is also very user friendly, with wizards for doing most system tasks like connecting to the internet and installing to hard disk or usb drive.
There is also a powerful package management system, pupget, with a very extensive and ever increasing list of additional packages available for easy installation. An additional package installer, dotpup, offers single click installation of a long list of software. In other words this is much more than a garden variety live cd. It is capable of being your main operating system and extensible enough to satisfy just about anyone.
How is all of this accomplished? I wish I could take all of the credit but I really have to take my hat off to the developer of Puppy Linux, Barry Kauler. Puppy (and Grafpup) uses the squash filesystem method of compression to reduce the size of the cd image by about two thirds. Then, through the magic of unionfs the whole filesystem becomes writeable again.
For a full explanation please go to the Puppylinux website, www.puppylinux.org. Another aspect of the incredible size to utility ratio is the careful selection of applications that goes into Puppy and has made its way into Grafpup. Applications are chosen for speed and simplicity, avoiding bulky and wasteful code. Grafpup uses icewm as its default (and only) window manager.
KDE or Gnome arent even considered. Opera is used as the default browser and email client, instead of the common combination of Firefox and Thunderbird which would be half again as large. Though small, you will find that ROX-filer is one of the best filemanagers that you will ever use. It just plain works. I have further cut down in certain other areas in order to leave room for some serious heavy duty graphics applications.
Even though things are cut down, you will find that Grafpup is a fairly complete operating system and most tasks can be completed without the need for additional software. You will be able to browse the web, send and recieve email, write and print documents, organize your digital photos, and watch dvd movies and video off the internet.
You will also be able to burn cds and dvds, create impressive graphics and animations, put together professional looking web pages, and create press-ready brochures or other materials for print. And Im talking about the live cd without any additional software.
Visit the Grafpup and Puppy package repositories and you can unlock as much potential as any of the most popular Linux distros out there. There you will find such powerful software as OpenOffice and the Seamonkey internet suite. You can create 3d graphics using Blender, or even install and run a large selection of Windows software using Wine.
Try it and see for yourself. Since it is a live cd there is very little, if any, risk involved. I believe you will be pleasantly surprised at what can be done using such a tiny system.
Enhancements:
- Grafpup 2.00 (final) is officially on the mirrors. This release comes with some really bleeding edge features when compared with previous versions, such as a 2.6.20.2 kernel, revamped package management with dependency resolution, GIMP 2.3.14, Cinepaint 0.22 with the Ufraw plug-in, a brand new control panel, cdrkit replacing cdrtools, Openbox replacing IceWM, and a host of other changes. In addition to the light-weight Openbox desktop, you can also easily download and install both Xfce and KDE. The software repository has blown up to include over 1,100 titles (and counting).
Download (106MB)
Added: 2007-06-03 License: GPL (GNU General Public License) Price:
912 downloads
oz2remind 0.2
oz2remind is a tool to convert OpenZaurus Opie calendar XML files to Remind format. more>>
oz2remind is a tool to convert OpenZaurus Opie calendar XML files to Remind format.
Its a small but useful Perl script to convert the datebook.xml file used by the calendar app in OpenZaurus Opie to Remind format.
About Remind:
Remind is a sophisticated calendar and alarm program. It includes the following features:
- A sophisticated scripting language and intelligent handling of exceptions and holidays.
- Plain-text, PostScript and HTML output.
- Timed reminders and pop-up alarms.
- A friendly graphical front-end for people who dont want to learn the scripting language.
- Facilities for both the Gregorian and Hebrew calendars.
- Support for 12 different languages.
About OpenZaurus:
The OpenZaurus project was created as an alternative Operating System for the Sharp Zaurus Personal Mobile Tool. The original purpose behind the project was to create a system (kernel + root filesystem) which was a bit closer to what the developer community specifically desired. The method by which this was accomplished was simply to use the Sharp ROM as a base and make alterations, bugfixes, additions and even removals, where necessary, to make the package more open.
Shortly after this, it was revamped completely. OpenZaurus was then a Debian based embedded distribution built from source, from the ground up. Given its debian roots, it is quite similar to other embedded Debian-based distributions, such as Familiar for the Ipaq. This means of doing things also facilitates an easy method for users to build their own custom system images.
Current Versions of OpenZaurus are built from the OpenEmbedded Build system, this was again a complete rebuild of the entire distribution from scratch.
<<lessIts a small but useful Perl script to convert the datebook.xml file used by the calendar app in OpenZaurus Opie to Remind format.
About Remind:
Remind is a sophisticated calendar and alarm program. It includes the following features:
- A sophisticated scripting language and intelligent handling of exceptions and holidays.
- Plain-text, PostScript and HTML output.
- Timed reminders and pop-up alarms.
- A friendly graphical front-end for people who dont want to learn the scripting language.
- Facilities for both the Gregorian and Hebrew calendars.
- Support for 12 different languages.
About OpenZaurus:
The OpenZaurus project was created as an alternative Operating System for the Sharp Zaurus Personal Mobile Tool. The original purpose behind the project was to create a system (kernel + root filesystem) which was a bit closer to what the developer community specifically desired. The method by which this was accomplished was simply to use the Sharp ROM as a base and make alterations, bugfixes, additions and even removals, where necessary, to make the package more open.
Shortly after this, it was revamped completely. OpenZaurus was then a Debian based embedded distribution built from source, from the ground up. Given its debian roots, it is quite similar to other embedded Debian-based distributions, such as Familiar for the Ipaq. This means of doing things also facilitates an easy method for users to build their own custom system images.
Current Versions of OpenZaurus are built from the OpenEmbedded Build system, this was again a complete rebuild of the entire distribution from scratch.
Download (0.003MB)
Added: 2006-05-07 License: GPL (GNU General Public License) Price:
1267 downloads
Pymp 1.0
Pymp project is a clean, flexible frontend to MPlayer written in Python. more>>
Pymp project is a clean, flexible frontend to MPlayer written in Python. It supports simple playlists, web streams, and anything else that MPlayer does. Pymp aims to blend in with your desktop environment, not stand out as many skinned players do.
Main features:
- Open files on the command line: pymp *.mp3
- Open locations: pymp http://foo.com dvd://1
- Drag and Drop files and folders to playlist
- M3U and PLS playlist format support
- Find files in playlist with ctrl+f
- Remote command execution:
pymp -remote pause
pymp -remote stop
pymp -remote play 12
pymp -remote current
pymp -remote seek 20
Enhancements:
- Major changes for this release include time output in the progress bar (since MPlayer finally supports it), the removal of the playlist tooltip hack (since Gtk+ 2.12 will address this), and a revamped About dialog.
- Pymp now also intelligently queues files from the command line, so that multiple Pymp instances are never started.
<<lessMain features:
- Open files on the command line: pymp *.mp3
- Open locations: pymp http://foo.com dvd://1
- Drag and Drop files and folders to playlist
- M3U and PLS playlist format support
- Find files in playlist with ctrl+f
- Remote command execution:
pymp -remote pause
pymp -remote stop
pymp -remote play 12
pymp -remote current
pymp -remote seek 20
Enhancements:
- Major changes for this release include time output in the progress bar (since MPlayer finally supports it), the removal of the playlist tooltip hack (since Gtk+ 2.12 will address this), and a revamped About dialog.
- Pymp now also intelligently queues files from the command line, so that multiple Pymp instances are never started.
Download (0.12MB)
Added: 2007-01-18 License: GPL (GNU General Public License) Price:
1010 downloads
Fire Gnome 19991219
Fire Gnome (aka gfirewall) is a GTK-based GUI for configuring a firewall. more>>
Fire Gnome (aka gfirewall) is a GTK-based GUI for configuring a firewall.
I am using mostly C in this code... but, I do like string and map from the stl C++ libraries so you will need libstdc++ to make it compile. I have, however, recently been exposed to glib BSTs. Although they are not as transparant as map is, I think I will convert the code to use GTree insteam.
Why? I wanted to make a tool to alter ipchains-save files. I think they are a useful way of storing ipchains configurations.
This is what I want to do for next version:
For now (items for v0.1.0)
Allow for adding and removing of rules in a chain.
Implement the statistics functions (with automated updates)
Write some hardcoded stock rules
Allow for macros in stock rules (as in MYIP or MYGATEWAY)
Allow for user additions to stock rules. Thanks to Shane Butler who suggested that I tie in with the Database of Masq Apps and especially with the Games List.
Improve on the display; Wallace Owen had an idea on displaying a colour coded tree based on chains and jumps not on the main chain they belong to.
Enhancements:
- thank you for your interest and support. I have been busy with life stuff and have not been able to put more effort into getting Fire Gnome finished. I have not abondoned the project but I just cannot see myself putting any more time into it till the mid summer. By that time the project will be revamped to work with iptables for Linux 2.4.x.
<<lessI am using mostly C in this code... but, I do like string and map from the stl C++ libraries so you will need libstdc++ to make it compile. I have, however, recently been exposed to glib BSTs. Although they are not as transparant as map is, I think I will convert the code to use GTree insteam.
Why? I wanted to make a tool to alter ipchains-save files. I think they are a useful way of storing ipchains configurations.
This is what I want to do for next version:
For now (items for v0.1.0)
Allow for adding and removing of rules in a chain.
Implement the statistics functions (with automated updates)
Write some hardcoded stock rules
Allow for macros in stock rules (as in MYIP or MYGATEWAY)
Allow for user additions to stock rules. Thanks to Shane Butler who suggested that I tie in with the Database of Masq Apps and especially with the Games List.
Improve on the display; Wallace Owen had an idea on displaying a colour coded tree based on chains and jumps not on the main chain they belong to.
Enhancements:
- thank you for your interest and support. I have been busy with life stuff and have not been able to put more effort into getting Fire Gnome finished. I have not abondoned the project but I just cannot see myself putting any more time into it till the mid summer. By that time the project will be revamped to work with iptables for Linux 2.4.x.
Download (1.0MB)
Added: 2006-07-12 License: GPL (GNU General Public License) Price:
1200 downloads
Interact 2.4
Interact project is an online learning and collaboration platform. more>>
Interact project is an online learning and collaboration platform.
Interact is an online learning and collaboration platform that was developed by the Christchurch College of Education.
It is a free alternative to the likes of WebCT and Blackboard, and was designed with the intention of making it easy for students and lecturers to interact online, and focuses on constructivist and Vygotskian views of teaching and learning.
Development Release for testing only - not recommended for live servers.
Enhancements:
- Major changes
- Lowercased all database table/column names to allow for better portability between linux/windows
- Major revamp of skins interface
- New default skin
- Improvements to journal/blog component
- New Chat component
- Fixed cross server scripting vulnerabilities
<<lessInteract is an online learning and collaboration platform that was developed by the Christchurch College of Education.
It is a free alternative to the likes of WebCT and Blackboard, and was designed with the intention of making it easy for students and lecturers to interact online, and focuses on constructivist and Vygotskian views of teaching and learning.
Development Release for testing only - not recommended for live servers.
Enhancements:
- Major changes
- Lowercased all database table/column names to allow for better portability between linux/windows
- Major revamp of skins interface
- New default skin
- Improvements to journal/blog component
- New Chat component
- Fixed cross server scripting vulnerabilities
Download (2.3MB)
Added: 2007-07-31 License: GPL (GNU General Public License) Price:
819 downloads
XAnim 2.80.1
XAnim project is a program for playing a wide variety of animation, audio and video formats on unix X11 machines. more>>
XAnim project is a program for playing a wide variety of animation, audio and video formats on unix X11 machines.
I attempt to reply to all the email messages I receive, however, I get quite a few with invalid return addresses. If you dont hear from me within a week, double check that your return address is correct.
XAnim X11 Support
XAnim supports the majority of the common X11 Visuals. It supports all depths that have a bpp of 1, 8, 16 and 32. Other bpps are non-standard(although they are legal). NOTE: that the depth indicates how many bits are used to specify the color of a pixel and the bpp indicates how many bits each pixel consumes in memory. For example, a depth 24 Visual usually has a 32 bpp uses 24 bits to specify the color and 8 bits of padding per pixel.
Since I optimize each video decompression routine(currently over sixty of them) for each bpp, its a lot of work when someone decides to use a "non-standard" bpp. Especially when the bpp doesnt have a correspondingly sized variable(like bytes for depth 8 or shorts for depth 16). This is why bpp 24 is not yet supported.
XAnim also supports X11 shared memory. This can greatly speed up the drawing of images on most X11 servers by eliminating the need for the X11 server to copy the image *before* writing the image to the display memory. NOTE: X11 shared memory isnt possible when you are using a remote display(ie: you are running on one machine and sending the display to another).
XAnim Audio Support
Unix doesnt have anything even remotely resembling an audio standard or API. This means separate and unique code must be written for each OS/machine combination that is to be supported.
Below is a list of the currently support platforms. If you have a platform that isnt currently supported and you would like to help write the code for it, let me know and I can provide you with some assistance, etc.
- Linux x86 platforms.
- NetBSD x86 platforms.
- BSDI x86 platforms.
- FreeBSD x86 platforms.
- SGI workstations(Indy, Indigo, etc).
- DEC workstations running MMS(Multimedia Services).
- Sun Solaris/SunOS Sparc/68K/x86 workstations.
- HP workstation running HPs Aserver.
- HP workstation direct audio device.
- Sony NEWS 5000 series workstations.
- QNX 4.2 x86 platforms.
- NEC EWS workstations.
- IBM AIX 4.1 workstations.
- Any machine running AudioFile(AF).
- Any machine running Net Audio Server(NAS).
Some time this year I plan on revamping the audio device section of XAnim to allow multiple audio devices to be compiled in at once. For example if you have a Solaris Sparc platform, you could then compile in support for the native audio device and NAS at the same time. That way you could use the same xanim executable depending on whether the machine youre on is running NAS or not.
The reason I bring this up is because I suspect I will probably break things left and right for a while and since I dont have access to the majority of these platforms, I wont be able to test them out before releasing. In any case, when the time comes, Ill give plenty of warning and will leave the old release around.
<<lessI attempt to reply to all the email messages I receive, however, I get quite a few with invalid return addresses. If you dont hear from me within a week, double check that your return address is correct.
XAnim X11 Support
XAnim supports the majority of the common X11 Visuals. It supports all depths that have a bpp of 1, 8, 16 and 32. Other bpps are non-standard(although they are legal). NOTE: that the depth indicates how many bits are used to specify the color of a pixel and the bpp indicates how many bits each pixel consumes in memory. For example, a depth 24 Visual usually has a 32 bpp uses 24 bits to specify the color and 8 bits of padding per pixel.
Since I optimize each video decompression routine(currently over sixty of them) for each bpp, its a lot of work when someone decides to use a "non-standard" bpp. Especially when the bpp doesnt have a correspondingly sized variable(like bytes for depth 8 or shorts for depth 16). This is why bpp 24 is not yet supported.
XAnim also supports X11 shared memory. This can greatly speed up the drawing of images on most X11 servers by eliminating the need for the X11 server to copy the image *before* writing the image to the display memory. NOTE: X11 shared memory isnt possible when you are using a remote display(ie: you are running on one machine and sending the display to another).
XAnim Audio Support
Unix doesnt have anything even remotely resembling an audio standard or API. This means separate and unique code must be written for each OS/machine combination that is to be supported.
Below is a list of the currently support platforms. If you have a platform that isnt currently supported and you would like to help write the code for it, let me know and I can provide you with some assistance, etc.
- Linux x86 platforms.
- NetBSD x86 platforms.
- BSDI x86 platforms.
- FreeBSD x86 platforms.
- SGI workstations(Indy, Indigo, etc).
- DEC workstations running MMS(Multimedia Services).
- Sun Solaris/SunOS Sparc/68K/x86 workstations.
- HP workstation running HPs Aserver.
- HP workstation direct audio device.
- Sony NEWS 5000 series workstations.
- QNX 4.2 x86 platforms.
- NEC EWS workstations.
- IBM AIX 4.1 workstations.
- Any machine running AudioFile(AF).
- Any machine running Net Audio Server(NAS).
Some time this year I plan on revamping the audio device section of XAnim to allow multiple audio devices to be compiled in at once. For example if you have a Solaris Sparc platform, you could then compile in support for the native audio device and NAS at the same time. That way you could use the same xanim executable depending on whether the machine youre on is running NAS or not.
The reason I bring this up is because I suspect I will probably break things left and right for a while and since I dont have access to the majority of these platforms, I wont be able to test them out before releasing. In any case, when the time comes, Ill give plenty of warning and will leave the old release around.
Download (0.43MB)
Added: 2006-11-17 License: Free for non-commercial use Price:
1080 downloads
KDE Network Mapper 0.2.0
KNetmap is a network discovery, scanning, and probing tool for KDE. more>>
KDE Network Mapper is a network discovery, probing, and scanning tool. It is a KDE GUI for nmap.
Individual hosts or entire subnets can be scanned simultaneously, and the results are shown in the interface as queries finish, so the user neednt wait for the entire scan to finish.
Main features:
- Save to/Load from simple XML format.
- NMap Scanning.
- NMap XML Import.
Enhancements:
- Removed KDE 3.1 support...seriously, upgrade.
- Migrated to UIC for the prefs, more UIC coming soon.
- Refactored the host info page.
- We have graphics now!
- Near full revamp of nmap code, new parsing, scanning, and presentation.
- The automake code is less braindead now.
- Stability has increased overall, as well as usefullness.
- Seriously, soo many changes, if you want the details, than diff -Naur it.
<<lessIndividual hosts or entire subnets can be scanned simultaneously, and the results are shown in the interface as queries finish, so the user neednt wait for the entire scan to finish.
Main features:
- Save to/Load from simple XML format.
- NMap Scanning.
- NMap XML Import.
Enhancements:
- Removed KDE 3.1 support...seriously, upgrade.
- Migrated to UIC for the prefs, more UIC coming soon.
- Refactored the host info page.
- We have graphics now!
- Near full revamp of nmap code, new parsing, scanning, and presentation.
- The automake code is less braindead now.
- Stability has increased overall, as well as usefullness.
- Seriously, soo many changes, if you want the details, than diff -Naur it.
Download (1.0MB)
Added: 2005-09-06 License: GPL (GNU General Public License) Price:
1512 downloads
CD-Rchive2 2.0.3
CD-Rchive2 is a complete revamp of the popular but now aged CD-Rchive program. more>>
CD-Rchive2 is a complete revamp of the popular but now aged CD-Rchive program. It is intended to be used with cdrecord-ProDVD, cdda2wav, and mkisofs for the production of data and music CDs and data DVDs.
Built in tools allow cloning of a complete CD or DVD and writing copies. A Boot Wizard will guide you through steps required to make a bootable CD or DVD, write the code, and compile a binary menu program which runs with isolinux.
Enhancements:
- Functionality was added when ripping tracks from CD to automatically convert to .mp3 instead of .wav via a checkbox on the .wav tab page.
- This requires lame to be installed.
- A problem of occassional incorrect audio device specification on single device machines such as laptops was fixed.
<<lessBuilt in tools allow cloning of a complete CD or DVD and writing copies. A Boot Wizard will guide you through steps required to make a bootable CD or DVD, write the code, and compile a binary menu program which runs with isolinux.
Enhancements:
- Functionality was added when ripping tracks from CD to automatically convert to .mp3 instead of .wav via a checkbox on the .wav tab page.
- This requires lame to be installed.
- A problem of occassional incorrect audio device specification on single device machines such as laptops was fixed.
Download (3.0MB)
Added: 2005-09-26 License: GPL (GNU General Public License) Price:
1490 downloads
Feedzeo 1.1 Beta
Feedzeo is a RSS/RDF/ATOM feed aggregator cum reader written in Java. more>>
Feedzeo is a RSS/RDF/ATOM feed aggregator cum reader written in Java. Feedzeo is an open source and free software licensed under GNU LGPL.
There are two parts to Feedzeo: a Server and a Client. The Server is the application you run on your desktop or any remote machine which has network connectivity. It runs in the background downloading the RSS/RDF/ATOM files and publishing it as html/data files.
The client is web-based - an AJAX based interface used to view the RSS/RDF/ATOM content in a web browser. It can be used to view or subscribe to feeds, change the style etc.
Enhancements:
- Fully revamped Web client (tree based interface)
- Support for OPML (v1.1) import
- Minor GUI enhancements
<<lessThere are two parts to Feedzeo: a Server and a Client. The Server is the application you run on your desktop or any remote machine which has network connectivity. It runs in the background downloading the RSS/RDF/ATOM files and publishing it as html/data files.
The client is web-based - an AJAX based interface used to view the RSS/RDF/ATOM content in a web browser. It can be used to view or subscribe to feeds, change the style etc.
Enhancements:
- Fully revamped Web client (tree based interface)
- Support for OPML (v1.1) import
- Minor GUI enhancements
Download (0.57MB)
Added: 2006-12-26 License: LGPL (GNU Lesser General Public License) Price:
1033 downloads
The Hacker Key Guide 4
The Hacker Key Guide allows hackers, both current and aspiring, to encode vital information about their traits. more>>
The Hacker Key Guide allows hackers, both current and aspiring, to encode vital information about their traits into a single line of text, generally useful for sig files.
The Hacker Key Guide is based in principle on the wonderful Geek Code by Robert Hayden, but is skewed further to the geek programming niche.
Enhancements:
- Category additions include "Cygwin" for Windows, "MMO" and "RTS" to games, and several new additions to the books section.
- Answers 2 and 3 in math were changed for those hackers still in secondary school.
- The Linux section was completely revamped and updated, and the user-specified (O)ther option was added to Linux and IDE/text editors.
- The politics section now uses the Political Compass website ratings.
<<lessThe Hacker Key Guide is based in principle on the wonderful Geek Code by Robert Hayden, but is skewed further to the geek programming niche.
Enhancements:
- Category additions include "Cygwin" for Windows, "MMO" and "RTS" to games, and several new additions to the books section.
- Answers 2 and 3 in math were changed for those hackers still in secondary school.
- The Linux section was completely revamped and updated, and the user-specified (O)ther option was added to Linux and IDE/text editors.
- The politics section now uses the Political Compass website ratings.
Download (MB)
Added: 2007-01-03 License: (FDL) GNU Free Documentation License Price:
1042 downloads
vines 2.0
vines is a small application which draws vines on your X or SunView screen. more>>
vines is a small application which draws vines on your X or SunView screen.
vines draws vines (wandering plants made up mostly of stems and leaves) on your X11 or SunView screen.
By default it draws in black and white, but color options (spring and fall) are provided.
The vines can grow across the top of your screen and down the side, down from the top of your screen until they reach the bottom, or start from the center and wander all over the screen forever.
Enhancements:
- added -z option (show version)
- added -F option (was described in README, but unimplemented!)
- added -x option (X11 synchronize)
- added -G option (growth rate)
- added -E option (edges, including bottom)
- added -P option (palette files, with samples in Vines/)
- beefed up -g option
- changed -h to -H for halt, added -h for help (like -?)
- revamped help
- various code cleanups
- various command line option and error message cleanups
- minor optimizations
- code now compiles cleanly (for X and linux, anyway)
- patched for ugly runtime bug on Dell/Linux 2.0.34/gcc 2.7.2
- added man page, CHANGES, MANIFEST, LEGALSTUFF
- added Imakefile, Makefile-noImake
- revamped README
- changed name to vines
- added sample leaf and stem template files (Sample.leaf, Sample.stem)
<<lessvines draws vines (wandering plants made up mostly of stems and leaves) on your X11 or SunView screen.
By default it draws in black and white, but color options (spring and fall) are provided.
The vines can grow across the top of your screen and down the side, down from the top of your screen until they reach the bottom, or start from the center and wander all over the screen forever.
Enhancements:
- added -z option (show version)
- added -F option (was described in README, but unimplemented!)
- added -x option (X11 synchronize)
- added -G option (growth rate)
- added -E option (edges, including bottom)
- added -P option (palette files, with samples in Vines/)
- beefed up -g option
- changed -h to -H for halt, added -h for help (like -?)
- revamped help
- various code cleanups
- various command line option and error message cleanups
- minor optimizations
- code now compiles cleanly (for X and linux, anyway)
- patched for ugly runtime bug on Dell/Linux 2.0.34/gcc 2.7.2
- added man page, CHANGES, MANIFEST, LEGALSTUFF
- added Imakefile, Makefile-noImake
- revamped README
- changed name to vines
- added sample leaf and stem template files (Sample.leaf, Sample.stem)
Download (0.032MB)
Added: 2006-09-29 License: Free To Use But Restricted Price:
1122 downloads
rbot 0.9.10
rbot is a ruby IRC bot. more>>
rbot is a ruby IRC bot. Think of him as a ruby bot framework with a highly modular design based around plugins. It is somekind of a infobot. See more RbotFeatures, or perhaps an ExampleSession.
Main features:
- Runtime configuration via irc chat
- User authentication and access levels for using different bot features
- Built in infobot-style keywords. See example session below.
- Support for underlying fact database (infobot fact files), which can be overridden or supplemented by runtime keyword controls
- Multi-language support - comes with english, dutch and german definitions so far - more translations welcome
- Powerful plugin architecture, comes with plugins for:
- DNS queries
- Babelfish translation
- Google searching
- Excuse generation
- Insult generation
- Karma
- Checking the weather
- Querying slashdot
- Doing Math
- Per-channel quote storage, searching and retrieval
- Reminders
- rot13 translation
- Check the spelling of a word
- Webserver Server: header examination
- RPG dice rolling
- larting people
- conversation stats
- more...
Enhancements:
- Many new and updated plugins, including one to poll RSS feeds.
- A first step towards a better auth system (total revamp due in 0.9.11).
- Improvements to network and server code, which should provide greater stability.
- A new message queueing mechanism with bit rate throttling.
- A new logging framework for debugging and tracing the activities of the bot.
- A new split-db registry system for better performance and transactional usage of bdb for resilience.
- More integration with Nickserv where available, including optional automatic ghost-killing.
<<lessMain features:
- Runtime configuration via irc chat
- User authentication and access levels for using different bot features
- Built in infobot-style keywords. See example session below.
- Support for underlying fact database (infobot fact files), which can be overridden or supplemented by runtime keyword controls
- Multi-language support - comes with english, dutch and german definitions so far - more translations welcome
- Powerful plugin architecture, comes with plugins for:
- DNS queries
- Babelfish translation
- Google searching
- Excuse generation
- Insult generation
- Karma
- Checking the weather
- Querying slashdot
- Doing Math
- Per-channel quote storage, searching and retrieval
- Reminders
- rot13 translation
- Check the spelling of a word
- Webserver Server: header examination
- RPG dice rolling
- larting people
- conversation stats
- more...
Enhancements:
- Many new and updated plugins, including one to poll RSS feeds.
- A first step towards a better auth system (total revamp due in 0.9.11).
- Improvements to network and server code, which should provide greater stability.
- A new message queueing mechanism with bit rate throttling.
- A new logging framework for debugging and tracing the activities of the bot.
- A new split-db registry system for better performance and transactional usage of bdb for resilience.
- More integration with Nickserv where available, including optional automatic ghost-killing.
Download (0.10MB)
Added: 2006-08-07 License: GPL (GNU General Public License) Price:
1176 downloads
Google Desktop for Linux 5.0
Search your hard drive for e-mail, files, and your Web and IM histories. more>> Instantly find your e-mail, files, media, Web history, and chats. By making your computer searchable, Google Desktop Search puts your information easily within your reach. It frees you from having to manually organize your files, e-mail, and Web pages youve viewed.
Google 5 revamps the sidebar interface and many gadgets, while adding a new dialog for adding gadgets. Also new are previews of search results and security alerts for suspicious Web links.<<less
Download (7.24MB)
Added: 2009-04-02 License: Freeware Price: Free
204 downloads
UMTSmon 0.6
UMTSmon is a tool to control and monitor a 3G (WCDMA, UMTS, HSDPA) card in a laptop. more>>
UMTSmon is a tool to control and monitor a 3G (WCDMA, UMTS, HSDPA) card in a laptop. UMTSmon software handles PIN codes, operator choice (roaming), sending/receiving SMS, and the setup of the connection.
Enhancements:
- This is probably the most stable release yet for all 100% supported cards.
- If you own a single port serial card (XU870, GC79, most Sierra Wireless), this release will finally work for you -- but dont try to do things with umtsmon while you are connected (like the SMS or info dialogs), or it will crash. It also has a new, revamped UI.
- Theres still one control that needs to be moved, but the new UI should work better for everyone.
- This release has a dialog at startup that will tell you if all settings are correct, and propose to change them if needed.
<<lessEnhancements:
- This is probably the most stable release yet for all 100% supported cards.
- If you own a single port serial card (XU870, GC79, most Sierra Wireless), this release will finally work for you -- but dont try to do things with umtsmon while you are connected (like the SMS or info dialogs), or it will crash. It also has a new, revamped UI.
- Theres still one control that needs to be moved, but the new UI should work better for everyone.
- This release has a dialog at startup that will tell you if all settings are correct, and propose to change them if needed.
Download (0.045MB)
Added: 2007-05-26 License: GPL (GNU General Public License) Price:
909 downloads
ArtistX 0.3
ArtistX is a comfortable way of trying multimedia GNU/Linux softwares without any installation. more>>
ArtistX is a comfortable way of trying multimedia GNU/Linux softwares without any installation. ArtistXs goal is to show multimedia creators that the world of GNU/Linux multimedia softwares is going further and further every day, sometimes faster than proprietary operating systems and softwares.
Since we know you have very limited time resources weve setup everything you need to test free multimedia softwares in a live cd/dvd which boots directly a complete GNU/Linux system without affecting your current installation (macs need virtualization to emulate a x86 computer): when you end your tests just reboot and ArtistX will be gone forever (except if you deserve it a second try...).
Software included in this site and in the live cd/dvd:
- Free 3D Engine and Development Software
- Free 3D Modelling and Animation Software
- Free Cluster Software
- Free Editor and Script Software
- Free Video Player Software
- Free Image and Picture Editing Software
- Free Render Queues Software
- Free Renderer Software
- Free Shader and GPU Tools
- Free CAD Software
- Free DMX light control Software
- Free DVD Ripping and Mastering Software
- Free Video Encoding and Decoding Software
- Free Video Editing Software
- Free Video Extra Software
- Free TV and Recording Software
- Free Video Streaming Software
- Free Fractals Software
- Free Vectorial and UML Software
- Free Optical Caracter Recognition (OCR) Software
- Free Image Synthesis Software
- Free Image and Picture Viewer Software
- Free Audio Synthesis and Editing Software
- Free Audio Streaming Software
- Free Audio Codec Software
- Free Audio Decoder Software
- Free Audio Encoder Software
- Free Audio Frameworks
- Free Radio Software
- Free Voice Recognition and Synthesis Software
- Free Font Software
- Free Audio Mixer Software
- Free Media Archives
Enhancements:
- All the ArtistX infrastructure and software were updated to the new Debian Live code.
- Software that is not packaged for Debian or not in the official archive (especially for video and 3D production) is included.
- The look and feel were revamped using suggestions from media professionals.
- KDE and GNOME applications now look nearly the same and dark, relaxing colors are used.
<<lessSince we know you have very limited time resources weve setup everything you need to test free multimedia softwares in a live cd/dvd which boots directly a complete GNU/Linux system without affecting your current installation (macs need virtualization to emulate a x86 computer): when you end your tests just reboot and ArtistX will be gone forever (except if you deserve it a second try...).
Software included in this site and in the live cd/dvd:
- Free 3D Engine and Development Software
- Free 3D Modelling and Animation Software
- Free Cluster Software
- Free Editor and Script Software
- Free Video Player Software
- Free Image and Picture Editing Software
- Free Render Queues Software
- Free Renderer Software
- Free Shader and GPU Tools
- Free CAD Software
- Free DMX light control Software
- Free DVD Ripping and Mastering Software
- Free Video Encoding and Decoding Software
- Free Video Editing Software
- Free Video Extra Software
- Free TV and Recording Software
- Free Video Streaming Software
- Free Fractals Software
- Free Vectorial and UML Software
- Free Optical Caracter Recognition (OCR) Software
- Free Image Synthesis Software
- Free Image and Picture Viewer Software
- Free Audio Synthesis and Editing Software
- Free Audio Streaming Software
- Free Audio Codec Software
- Free Audio Decoder Software
- Free Audio Encoder Software
- Free Audio Frameworks
- Free Radio Software
- Free Voice Recognition and Synthesis Software
- Free Font Software
- Free Audio Mixer Software
- Free Media Archives
Enhancements:
- All the ArtistX infrastructure and software were updated to the new Debian Live code.
- Software that is not packaged for Debian or not in the official archive (especially for video and 3D production) is included.
- The look and feel were revamped using suggestions from media professionals.
- KDE and GNOME applications now look nearly the same and dark, relaxing colors are used.
Download (2100MB)
Added: 2007-04-12 License: GPL (GNU General Public License) Price:
944 downloads
Secleted [ 0 ] software to compare
- Page: 1 of 2
- 1
- 2
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above revamp search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
