Free red line recovery software for linux

Beyond the Red Line project is a stand-alone total conversion for the award-winning Freespace 2 released by Volition and Interplay for the PC. It is based on the popular new tv-show Battlestar Galactica. No, not the one from the 70s.
Will I need Freespace 2 to play it?
No, Beyond the Red Line is a stand-alone conversion and will not require Freespace 2. All you need for playing will be included in the download.
Is it free?
Absolutely. The game is made by fans for the fans, no profit is being made from any part of the project. Although we could use some pizzas and coke to keep our mortal bodies running.
That about covers it... a BSG total conversion of FS2 that has just released a demo version. it plays really well and looks amazing. a must for any BSG fan.
Enhancements:
- This demo contains spoilers for the second season of BSG, so if you havent seen that season yet you should pass on this game for now.

Make CD-ROM Recovery makes a bootable (El Torito) disaster recovery image (CDrec.iso), including backups of the linux system to the same CD-ROM (or CD-RW) if space permits, or to a multi-volume CD-ROM set. Otherwise, the backups can be stored on another local disk, NFS disk or (remote) tape.

After a disaster (disk crash or system intrusion) the system can be booted from the CD-ROM and one can restore the complete system as it was (at the time mkCDrec was run) with the command /etc/recovery/start-restore.sh

Disk cloning (clone-dsk.sh script) allows one to restore a disk to another disk (the destination disk does not have to be of the same size as it calculates the partition layout itself). A thrid script, restore-fs.sh, will restore only one filesystem to a partition of your choice, and the user can choose with which filesystem the partition has to be formatted.

Linux 2.2.x, 2.4.x and 2.6.x kernels are supported, and if size of the kernel is not too big a boot floppy can be made, otherwise a 2.88 Mb boot floppy will be emulated on CD-ROM.

MkCDrec supports ext2 , ext3, minix, xfs , jfs, reiserfs file systems, LVM and software RAID (multiple devices). Each file system is backed up as a compressed tar archive (including the tar log). The compress program used is the users choice (compress, gzip, bzip2, lzop,...)

But there is more: msdos, fat, vfat and ntfs mounted partitions are recognized and are saved as compressed dumps (on CD, tape, etc.)
The user has the possibility to encrypt all backups with openssl if desired (see the Config.sh configuration file for more information).

To restore your system completely just boot from the first CD-ROM made by mkCDrec and type "/etc/recovery/start-restore.sh " to restore everything from CD. Automatic Disaster Recovery and One Button Disaster Recovery are supported by mkCDrec too.
With the clone-dsk.sh script one can restore selective a disk or partitions to another free disk.

mkCDrec supports IDE (inclusive ATA), SCSI disks, hardware RAID based disks (e.g. Compaq SMART2 Disk Array), LVM and software RAID. With an El-Torito CD-ROM you can boot from an IDE or SCSI based CD-ROM drive on IA32/64, powermac and x86_64 GNU/Linux based computer systems only.

The gzip Recovery Toolkit attempts to automate the recovery of data from corrupted gzip files (including tarballs) through a program called gzrecover. gzip Recovery Toolkit package is still very experimental at this point.
99% of "corrupted" gzip archives are caused by transferring the file via FTP in ASCII mode instead of binary mode. Please re-transfer the file in the correct mode first before attempting to recover from a file you believe is corrupted.
This program is provided AS IS with absolutely NO WARRANTY. It is not guaranteed to recover anything from your file, nor is what it does recover guaranteed to be good data. The bigger your file, the more likely that something will be extracted from it. Also keep in mind that this program gets faked out and is likely to "recover" some bad data. Everything should be manually verified.
Usage:
Run gzrecover on a corrupted .gz file. Anything that can be read from the file will be written to a file with the same name, but with a .recovered appended (any .gz is stripped). You can override this with the -o option.
To get a verbose readout of exactly where gzrecover is finding bad bytes, use the -v option to enable verbose mode. This will probably overflow your screen with text so best to redirect output to a file.
Once gzrecover has finished, you will need to manually verify any data recovered as it is quite likely that our output file is corrupt and has some garbage data in it. If your archive is a tarball, read on.
For tarballs, the tar program will choke because GNU tar cannot handle errors in the file format. Fortunately, GNU cpio (tested at version 2.5 or higher) handles corrupted files out of the box.
Heres an example:
$ ls *.gz
my-corrupted-backup.tar.gz
$ gzrecover my-corrupted-backup.tar.gz
$ ls *.recovered
my-corrupted-backup.tar.recovered
$ cpio -F my-corrupted-backup.tar.recovered -i -v
If you have a previous release, please note that the patches to GNU tar have been discontinued. They were only marginally successful at best and GNU cpio does what is needed out of the box and does it far better.
Enhancements:
- Documentation updates, including a man page, plus code cleanup to better enable inclusion in GNU/Linux packages and eliminate compilation warnings.

Kaboot Linux Operating system aims to provide an operating system which you can take anywhere and has all your favourite programs on.
Kaboot operating system is avaliable as a Live CD or Live USB you can take with you anywhere.
A number of different versions are avaliable, two optimised for size or speed, one for functionality, and one science based.
All containing a host of useful programs able to boot virtually any computer (meeting the minimum requirements) from CD and
USB.Kaboot is still in active development and if you find a bug or fix, you can let me know in the forums.
Enhancements:
- A network bug was fixed.
- A few debugging utilities were added.
- Hotplugging was implemented.

Command Line calculator "CLC" is the calculator that can calculate direct at the Linux console.

Extract the CLCC file to /usr/bin you might need to login as root or equvalent account, to be able to access it whenever you need it.

Then just write CLCC 67+89 and the answer will be presented to you directly.

CLCC calculates from left to right with no exceptions. CLC also have some extra parameters that is sent to CLC using backslash parameters.

CLCC r2 10/3 this will round the result to 2 decimals you can use 1 to 9 if you want to round the sum of.

the r parameter can also be combined with the other parameters but it must be added first like this

CLCC r3c 10/3 - to get 10 diveded with 3 rounded down to 3 decimals.

CLCC is tested with Ubuntu 6.10 and Puppy OS 2.13 but should work with any Linux version in console mode.

The program is developed using Hotbasic for Linux and is Freeware, hope you find it useful, send and email if you have any questions.

Hotbasic is a basic language that compiles into assembler direct, no interpeter that slows down the code, just pure assembler.

So if you want assembler in Linux but doesnt want to code in nasm, HotBasic is the compiler for you.

slsnif is a serial line sniffer. It listens to the specified serial port and logs all data coming through it. slsnif works transparently for both the device connected to the serial port and the controlling software for this device. It operates by opening a pseudo tty (pty) and linking it to the actual serial port.
slsnif operates by opening a pty and linking it to the serial port. These are following parameters / options:
1. Serial port to open (required).
2. Name of the file to direct output to (optional, defaults to stdout).
3. Desired baudrate (optional, defaults to 9600 baud).
4. Timestamp On/Off (optional, defaults to Off).
5. Print ascii values in hex On/Off (optional, defaults to Off)
6. Print number of bytes transmitted On/Off (optional, defaults to Off).
7. Optional colors for timestamp, number of bytes transmitted and normal output.
8. Lock port On/Off (optional, defaults to On).
9. Use Unix98 ptys instead of BSD ptys (optional, defaults to BSD style).
10. Second serial port to open. If specified, this port will be used instead of a pty, thus providing an ability to log data between two serial ports.
Enhancements:
- Added ability to resynchronize ports at any time by sending a SIGUSR1 signal to slsnif. Useful for debugging applications that change port parameters mid-way, after starting the transmission. One example is pppd daemon, which sets initial parameters in the chat script, and changes them later, after chat script terminates.
- Added ability to use SYSV (Unix98) ptys instead of BSD ones (see -u and --unix98 parameters). This option can also be turned on/off from rc-file.

A tool to take that corrupted Netscape Address Book and get your information out of it. This is a tool to take that corrupted Netscape Address Book and get your information out of it. After the third time my book got corrupted, I gave up trying to fix it by hand and wrote this program. This program attempts to get as much information out of the address book as is possible. But as with all programs of this type, it will always need to change to keep track of the different ways in which the address book can be corrupted. It can output .csv (Comma Separated Values) or .ldi (LDAP Date Interchange Format) files.Dont output .csv files, you will lose all mailing list information.
Enhancements:
- Major bugfixes with handling indexes
- Major bugfixes with handling edits
- Added LDIF support
- Added support for mailling lists