Free recreate software for linux

aggregate is a tool for aggregating CIDR networks. Input is read from stdin and output is written to stdout. It undestands IPv4 networks represented as network/prefix, network/netmask and start_address - end_addres. It is able to read input in any one of these formats and output in the same or a different format.
It is also able to limit the maximum and minimum prefix length that will be output. This can be used to filter, for instance ignoring all networks with a prefix longer than 24 bits. That is all networks, smaller than a traditional Class C.
The `configure shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile in each directory of the package. It may also create one or more `.h files containing system-dependent definitions. Finally, it creates a shell script `config.status that
you can run in the future to recreate the current configuration, a file `config.cache that saves the results of its tests to speed up reconfiguring, and a file `config.log containing compiler output (useful mainly for debugging `configure).
If you need to do unusual things to compile the package, please try to figure out how `configure could check whether to do them, and mail diffs or instructions to the address given in the `README so they can be considered for the next release. If at some point `config.cache contains results you dont want to keep, you may remove or edit it.
The file `configure.in is used to create `configure by a program called `autoconf. You only need `configure.in if you want to change it or regenerate `configure using a newer version of `autoconf.
Enhancements:
- Out by one error in aggregation of ranges (again )

ZZT is a game creation system created by Epic Megagames Tim Sweeny in 1990. The official release included 6 worlds, including the shareware world The Town of ZZT. It also included a built-in game editor, allowing for the creation of new games. Check out Z2 for more information about the original ZZT.
DreamZZT is an attempt to recreate the ZZT engine using more modern technology. DreamZZT project is currently available for Linux, Mac OS X, and Microsoft Windows. Due to several techncial issues, Dreamcast builds are currently unavailable.
Main features:
Some of the highlights of DreamZZT include:
- Animated water
- Custom font
- Debug console
- Load / save support
- Music and sound effects
- New torch effect
- ZZT-OOP interpreter
The following ZZT enemys are currently supported:
- Lions
- Tigers
- Bears
- Sharks
- Ruffians
Enhancements:
- New features include an online leaderboard
- on-the-fly board compression
- an integrated editor
- new application and document icons
- digitized drum samples, and centipedes.

Kicker Pager provides a desktop overview of your KDE virtual desktops. It aims to provide a more fully featured pager for the default Kicker panel.

The `configure shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile in each directory of the package.

It may also create one or more `.h files containing system-dependent definitions.

Finally, it creates a shell script `config.status that you can run in the future to recreate the current configuration, a file `config.cache that saves the results of its tests to speed up reconfiguring, and a file `config.log containing compiler output (useful mainly for debugging `configure).

If you need to do unusual things to compile the package, please try to figure out how `configure could check whether to do them, and mail diffs or instructions to the address given in the `README so they can be considered for the next release.

If at some point `config.cache contains results you dont want to keep, you may remove or edit it.

The file `configure.in is used to create `configure by a program called `autoconf. You only need `configure.in if you want to change it or regenerate `configure using a newer version of `autoconf.

The simplest way to compile this package is:

1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system.

If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute
`configure itself.

Running `configure takes a while. While running, it prints some messages telling which features it is checking for.

2. Type `make to compile the package.

3. Type `make install to install the programs and any data files and documentation.

4. You can remove the program binaries and object files from the source code directory by typing `make clean.

Sencap is a simple ENCAP software manager. Encapping is a method of installing software from source tarballs into private trees (bin, lib, man, share) and symlinking them to the system tree (e.g. /usr/local).

Uninstallation of encapped software is quick, reliable and easy. Encapping is best used to augment the default package manager, not to replace it.

Installation

These are generic installation instructions.

The `configure shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile in each directory of the package. It may also create one or more `.h files containing system-dependent definitions.

Finally, it creates a shell script `config.status that you can run in the future to recreate the current configuration, a file `config.cache that saves the results of its tests to speed up reconfiguring, and a file `config.log containing compiler output (useful mainly for debugging `configure).

If you need to do unusual things to compile the package, please try to figure out how `configure could check whether to do them, and mail diffs or instructions to the address given in the `README so they can be considered for the next release. If at some point `config.cache contains results you dont want to keep, you may remove or edit it.

The file `configure.in is used to create `configure by a program called `autoconf. You only need `configure.in if you want to change it or regenerate `configure using a newer version of `autoconf.

The simplest way to compile this package is:

1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system. If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute
`configure itself.

Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.

2. Type `make to compile the package.

3. Optionally, type `make check to run any self-tests that come with the package.

4. Type `make install to install the programs and any data files and documentation.

5. You can remove the program binaries and object files from the source code directory by typing `make clean. To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean. There is
also a `make maintainer-clean target, but that is intended mainly for the packages developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.

Lock keys Applet is a GNOME-applet, that shows the status of the caps-, num- and scroll-lock keys of your keyboard.
This isnt especially usefull for normal keyboards, as they got leds for that. But some keyboards (especially wireless keyboards) dont have. One more feature of the applet is that it saves the status of the lock-keys and restores it, when starting GNOME.
Installation:
The `configure shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile in each directory of the package.
It may also create one or more `.h files containing system-dependent definitions.
Finally, it creates a shell script `config.status that you can run in the future to recreate the current configuration, a file `config.cache that saves the results of its tests to speed up reconfiguring, and a file `config.log containing compiler output (useful mainly for debugging `configure).
If you need to do unusual things to compile the package, please try to figure out how `configure could check whether to do them, and mail diffs or instructions to the address given in the `README so they can be considered for the next release.
If at some point `config.cache contains results you dont want to keep, you may remove or edit it.
The file `configure.in is used to create `configure by a program called `autoconf. You only need `configure.in if you want to change it or regenerate `configure using a newer version of `autoconf.
The simplest way to compile this package is:
1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system.
If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute `configure itself.
Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.
2. Type `make to compile the package.
3. Optionally, type `make check to run any self-tests that come with the package.
4. Type `make install to install the programs and any data files and documentation.
5. You can remove the program binaries and object files from the source code directory by typing `make clean. To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean.
There is also a `make maintainer-clean target, but that is intended mainly for the packages developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
Enhancements:
- (almost) completly renamed everything to lock-keys-applet

libstree is a generic suffix tree implementation, written in C. libstree library can handle arbitrary data structures as elements of a string. Unlike most demo implementations, it is thus not limited to simple ASCII character strings.
Suffix tree generation in libstree is highly efficient and implemented using the algorithm by Ukkonen, which means that libstree builds suffix trees in time linear to the length of the strings (assuming that string element comparisons can be done in O(1)).
libstree can handle multiple strings per suffix tree, including dynamic insertion and removal of strings. It provides various means of obtaining information about nodes in the tree, such as depth-first and breadth-first iteration, leaves iteration, and bottom-up iteration.
libstree provides implementations of longest-common-substring and longest-repeated-substring algorithms, as examples of how to build complex algorithms using the suffix tree primitives.
Installation:
The `configure shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile in each directory of the package.
It may also create one or more `.h files containing system-dependent definitions. Finally, it creates a shell script `config.status that you can run in the future to recreate the current configuration, and a file `config.log containing compiler output (useful mainly for debugging `configure).
It can also use an optional file (typically called `config.cache and enabled with `--cache-file=config.cache or simply `-C) that saves the results of its tests to speed up reconfiguring. (Caching is disabled by default to prevent problems with accidental use of stale cache files.)
If you need to do unusual things to compile the package, please try to figure out how `configure could check whether to do them, and mail diffs or instructions to the address given in the `README so they can be considered for the next release.
If you are using the cache, and at some point `config.cache contains results you dont want to keep, you may remove or edit it.
The file `configure.ac (or `configure.in) is used to create `configure by a program called `autoconf. You only need `configure.ac if you want to change it or regenerate `configure using a newer version of `autoconf.
The simplest way to compile this package is:
1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system. If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute
`configure itself.
Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.
2. Type `make to compile the package.
3. Optionally, type `make check to run any self-tests that come with the package.
4. Type `make install to install the programs and any data files and documentation.
5. You can remove the program binaries and object files from the source code directory by typing `make clean. To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean.
There is also a `make maintainer-clean target, but that is intended mainly for the packages developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
Enhancements:
- LCS can now be run repeatedly on a single unmodified tree without problems.
- A memory leak in lst_stree_clear() has been fixed.

libiriverdb was created to maintain the database of metadata on iRiver H300 and H100 series Jukeboxes.
It consists of a shared library along with a small example utility to demonstrate how it works. libiriverdb is envisaged that the library is used to add support for iRiver devices to the various audio applications available.
Installation:
The `configure shell script attempts to guess correct values for various system-dependent variables used during compilation.
It uses those values to create a `Makefile in each directory of the package. It may also create one or more `.h files containing system-dependent definitions.
Finally, it creates a shell script `config.status that you can run in the future to recreate the current configuration, and a file `config.log containing compiler output (useful mainly for debugging `configure).
It can also use an optional file (typically called `config.cache and enabled with `--cache-file=config.cache or simply `-C) that saves the results of its tests to speed up reconfiguring. (Caching is disabled by default to prevent problems with accidental use of stale cache files.)
If you need to do unusual things to compile the package, please try to figure out how `configure could check whether to do them, and mail diffs or instructions to the address given in the `README so they can be considered for the next release.
If you are using the cache, and at some point `config.cache contains results you dont want to keep, you may remove or edit it.
The file `configure.ac (or `configure.in) is used to create `configure by a program called `autoconf. You only need `configure.ac if you want to change it or regenerate `configure using a newer version of `autoconf.
The simplest way to compile this package is:
1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system.
If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute `configure itself.
Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.
2. Type `make to compile the package.
3. Optionally, type `make check to run any self-tests that come with the package.
4. Type `make install to install the programs and any data files and documentation.
5. You can remove the program binaries and object files from the source code directory by typing `make clean.
To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean. There is also a `make maintainer-clean target, but that is intended mainly for the packages developers.
If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
Enhancements:
- This release fixes a double-free memory error, tweaks the MP3 genre parsing, and stops using deprecated D-Bus API calls.