Free recovery from mormonism software for linux

The gzip Recovery Toolkit attempts to automate the recovery of data from corrupted gzip files (including tarballs) through a program called gzrecover. gzip Recovery Toolkit package is still very experimental at this point.
99% of "corrupted" gzip archives are caused by transferring the file via FTP in ASCII mode instead of binary mode. Please re-transfer the file in the correct mode first before attempting to recover from a file you believe is corrupted.
This program is provided AS IS with absolutely NO WARRANTY. It is not guaranteed to recover anything from your file, nor is what it does recover guaranteed to be good data. The bigger your file, the more likely that something will be extracted from it. Also keep in mind that this program gets faked out and is likely to "recover" some bad data. Everything should be manually verified.
Usage:
Run gzrecover on a corrupted .gz file. Anything that can be read from the file will be written to a file with the same name, but with a .recovered appended (any .gz is stripped). You can override this with the -o option.
To get a verbose readout of exactly where gzrecover is finding bad bytes, use the -v option to enable verbose mode. This will probably overflow your screen with text so best to redirect output to a file.
Once gzrecover has finished, you will need to manually verify any data recovered as it is quite likely that our output file is corrupt and has some garbage data in it. If your archive is a tarball, read on.
For tarballs, the tar program will choke because GNU tar cannot handle errors in the file format. Fortunately, GNU cpio (tested at version 2.5 or higher) handles corrupted files out of the box.
Heres an example:
$ ls *.gz
my-corrupted-backup.tar.gz
$ gzrecover my-corrupted-backup.tar.gz
$ ls *.recovered
my-corrupted-backup.tar.recovered
$ cpio -F my-corrupted-backup.tar.recovered -i -v
If you have a previous release, please note that the patches to GNU tar have been discontinued. They were only marginally successful at best and GNU cpio does what is needed out of the box and does it far better.
Enhancements:
- Documentation updates, including a man page, plus code cleanup to better enable inclusion in GNU/Linux packages and eliminate compilation warnings.

Cmos password recovery tools decrypts password stored in cmos used to access BIOS SETUP.
Works with the following BIOSes:
- ACER/IBM BIOS
- AMI BIOS
- AMI WinBIOS 2.5
- Award 4.5x/4.6x/6.0
- Compaq (1992)
- Compaq (New version)
- IBM (PS/2, Activa, Thinkpad)
- Packard Bell
- Phoenix 1.00.09.AC0 (1994), a486 1.03, 1.04, 1.10 A03, 4.05 rev 1.02.943, 4.06 rev 1.13.1107
- Phoenix 4 release 6 (User)
- Gateway Solo - Phoenix 4.0 release 6
- Toshiba
- Zenith AMI
With CmosPwd, you can also backup, restore and erase/kill cmos.
AWARD 4.50 have a backdoor, a generic password : AWARD_SW SOYO motherboard have "SY_MB" as master password for Award 4.51. CmosPwd give equivalent passwords for Award BIOS, not original one.
CmosPwd works and compiles under:
- Dos-Win9x,
- Windows NT/W2K/XP/2003,
- Linux,
- FreeBSD and NetBSD.
Enhancements:
- This version adds support for the VAIO EEPROM and Samsung P25 CMOS.

Kaboot Linux Operating system aims to provide an operating system which you can take anywhere and has all your favourite programs on.
Kaboot operating system is avaliable as a Live CD or Live USB you can take with you anywhere.
A number of different versions are avaliable, two optimised for size or speed, one for functionality, and one science based.
All containing a host of useful programs able to boot virtually any computer (meeting the minimum requirements) from CD and
USB.Kaboot is still in active development and if you find a bug or fix, you can let me know in the forums.
Enhancements:
- A network bug was fixed.
- A few debugging utilities were added.
- Hotplugging was implemented.

Relax and Recover (abbreviated rear) is a highly modular disaster recovery framework for GNU/Linux based systems.
The disaster recovery information (and maybe the backups) can be stored via the network, local on hard disks or USB devices, DVD/CD-R, tape, etc. The result is also a bootable image that is capable of booting via PXE, DVD/CD and tape (OBDR).
Main features:
- Focus on Disaster Recovery
- Modular concept
- For Linux and other Unix-like operations systems
- No external dependancies - use only standard software supplied with the distribution
- encryption (optional) - openssl ?
- Linux: kernel > 2.6 supported (no kernel 2.2/2.4 support !)
- User friendly - minimal output, use log file for error messages and details
The aim is to make rear as least demanding as possible, it will require only the applications neccessary to fulfill the job rear is configured for. All other applications will be copied to the rescue system if they are present.
Enhancements:
- Added SELinux suppport for NETFS Did restore tests with NETFS - see video 2006-08-31 GSS
- Added NETFS support BACKUP=NETFS 2006-08-30 GSS
- finally fixed bug in mkrescue-functions.sh about c0d0p 0 (DEVwP=1)
- Added RHEL ES/AS support 2006-07-21 GD
- start the NFS/CIFS tar backup-restore cyclus
- added support for Software RAID

Automated Linux From Scratch (ALFS) is a project that creates the generic framework for an extendable system builder and package installer.

Why would I want to use ALFS?

After having gone through the LFS and BLFS books more than 2 or 3 times, you will quickly appreciate the ability to automate the task of compiling the software you want for your systems.

What can I do with ALFS?

The goal of ALFS is to automate the process of creating an LFS system. It seeks to make the process of building LFS easier and more efficient while still providing flexibility by granting the user total control and insight into the compilation and management of his LFS build.

How is ALFS implemented?

nALFS

The first ALFS implementation was nALFS by Neven Has. nALFS is a small program written in C. It first parses an XML profile that contains information concerning the LFS build process into a series of internal commands. It can then execute these at your discretion, thus automating the compilation of LFS.

jhalfs

Currently, the official implementation is jhalfs. Originally created by Jeremy Huntwork, but since developed and maintained by Manuel Canales Esparcia and George Boudreau, jhalfs has become a light-weight, practical method of automating an LFS build. jhalfs is a Bash shell script that makes use of Subversion and xsltproc to first download the XML sources of the Linux From Scratch book and then extract any necessary commands, placing them into executable shell scripts. If you do not already have the necessary source packages in place on your system jhalfs can fetch them. Finally, jhalfs generates a Makefile which will control the execution of the shell scripts, allowing for recovery if the build should encounter an error. Since jhalfs extracts its commands to run directly from the LFS book, there are no profiles to edit or maintain.

Note: The 2.2 version of jhalfs has been released. A tarball can been downloaded from http://www.linuxfromscratch.org/alfs/downloads/jhalfs/stable/.

alfs

There are many in-depth features that have been requested for future ALFS implementations. Because of this, development has been slated for an entirely new build tool which will be called alfs. To see a list of features that will appear in alfs, please read our Software Requirements Specification. If you wish to help develop this new tool, please subscribe to the alfs-discuss mailing list and leave a note there explaining your desire to help.

nEW uNIFIED mEMORY aCCESS (or numa for short) is a file recovery tool for the ext3/ext2 file system. It recovers deleted GIF files of less than 48kb.
Enhancements:
- This release also recovers MP3, PDF, PNG, HTML, and Java files.

Quicktime for Linux lets you read and write Quicktime movies using several codecs. There are many Quicktime libraries for Linux; this one emphasizes reliability and accuracy while not stressing economy.
Also included are frontends to several of the codecs which dont require Quicktime encapsulation, header dump, chunk extraction, and recovery tools.
Enhancements:
- Selectively caching GOP frames to speed up reverse playback. Library upgrades for x264 and ffmpeg.

Reliable Response Notification provides guaranteed delivery of critical messages to a wide range of devices. The project guarantees that every emergency will have one, and only one, person responding and taking charge of the recovery.
For integrated services, like some network monitors, help-desk packages, and security suites, Reliable Response Notification allows the user to update records via their mobile devices. It is available as either a standalone server or as a hosted service.
Enhancements:
- The product supports three types of groups: broadcast, escalation and on-call.
- Many devices are supported, including email, SMS, text-to-speech, Jabber, GTalk, SameTime IM, and alphanumeric pagers.
- Integrations for a number of packages are available.
- There is an easy system to add new integrations as needed.