recovery console
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 881
gzip Recovery Toolkit 0.5
gzip Recovery Toolkit attempts to automate the recovery of data from corrupted gzip files (including tarballs) through a program more>>
The gzip Recovery Toolkit attempts to automate the recovery of data from corrupted gzip files (including tarballs) through a program called gzrecover. gzip Recovery Toolkit package is still very experimental at this point.
99% of "corrupted" gzip archives are caused by transferring the file via FTP in ASCII mode instead of binary mode. Please re-transfer the file in the correct mode first before attempting to recover from a file you believe is corrupted.
This program is provided AS IS with absolutely NO WARRANTY. It is not guaranteed to recover anything from your file, nor is what it does recover guaranteed to be good data. The bigger your file, the more likely that something will be extracted from it. Also keep in mind that this program gets faked out and is likely to "recover" some bad data. Everything should be manually verified.
Usage:
Run gzrecover on a corrupted .gz file. Anything that can be read from the file will be written to a file with the same name, but with a .recovered appended (any .gz is stripped). You can override this with the -o option.
To get a verbose readout of exactly where gzrecover is finding bad bytes, use the -v option to enable verbose mode. This will probably overflow your screen with text so best to redirect output to a file.
Once gzrecover has finished, you will need to manually verify any data recovered as it is quite likely that our output file is corrupt and has some garbage data in it. If your archive is a tarball, read on.
For tarballs, the tar program will choke because GNU tar cannot handle errors in the file format. Fortunately, GNU cpio (tested at version 2.5 or higher) handles corrupted files out of the box.
Heres an example:
$ ls *.gz
my-corrupted-backup.tar.gz
$ gzrecover my-corrupted-backup.tar.gz
$ ls *.recovered
my-corrupted-backup.tar.recovered
$ cpio -F my-corrupted-backup.tar.recovered -i -v
If you have a previous release, please note that the patches to GNU tar have been discontinued. They were only marginally successful at best and GNU cpio does what is needed out of the box and does it far better.
Enhancements:
- Documentation updates, including a man page, plus code cleanup to better enable inclusion in GNU/Linux packages and eliminate compilation warnings.
<<less99% of "corrupted" gzip archives are caused by transferring the file via FTP in ASCII mode instead of binary mode. Please re-transfer the file in the correct mode first before attempting to recover from a file you believe is corrupted.
This program is provided AS IS with absolutely NO WARRANTY. It is not guaranteed to recover anything from your file, nor is what it does recover guaranteed to be good data. The bigger your file, the more likely that something will be extracted from it. Also keep in mind that this program gets faked out and is likely to "recover" some bad data. Everything should be manually verified.
Usage:
Run gzrecover on a corrupted .gz file. Anything that can be read from the file will be written to a file with the same name, but with a .recovered appended (any .gz is stripped). You can override this with the -o option.
To get a verbose readout of exactly where gzrecover is finding bad bytes, use the -v option to enable verbose mode. This will probably overflow your screen with text so best to redirect output to a file.
Once gzrecover has finished, you will need to manually verify any data recovered as it is quite likely that our output file is corrupt and has some garbage data in it. If your archive is a tarball, read on.
For tarballs, the tar program will choke because GNU tar cannot handle errors in the file format. Fortunately, GNU cpio (tested at version 2.5 or higher) handles corrupted files out of the box.
Heres an example:
$ ls *.gz
my-corrupted-backup.tar.gz
$ gzrecover my-corrupted-backup.tar.gz
$ ls *.recovered
my-corrupted-backup.tar.recovered
$ cpio -F my-corrupted-backup.tar.recovered -i -v
If you have a previous release, please note that the patches to GNU tar have been discontinued. They were only marginally successful at best and GNU cpio does what is needed out of the box and does it far better.
Enhancements:
- Documentation updates, including a man page, plus code cleanup to better enable inclusion in GNU/Linux packages and eliminate compilation warnings.
Download (0.005MB)
Added: 2006-08-29 License: zlib/libpng License Price:
1170 downloads
Pacman for Console 1.2
Pacman for Console is a pacman game which can be played on a text-based console without using X. more>>
Pacman for Console is a pacman game which can be played on a text-based console without using X.
Installation:
make
make install (as root)
Uninstall:
make uninstall
Enhancements:
- A simple level editor was added.
- Error messages on GCC 2.96 were fixed.
- An introduction screen was added.
- Invincibility is deactivated once a level is complete.
<<lessInstallation:
make
make install (as root)
Uninstall:
make uninstall
Enhancements:
- A simple level editor was added.
- Error messages on GCC 2.96 were fixed.
- An introduction screen was added.
- Invincibility is deactivated once a level is complete.
Download (0.011MB)
Added: 2006-12-20 License: Freely Distributable Price:
1045 downloads
Mantaray Console 2.0
Mantaray Console is a distributed, peer-to-peer, server-less communication & messaging solution for JAVA (JMS), C++ and .NET app more>>
Mantaray Console is a distributed, peer-to-peer, server-less communication & messaging solution for JAVA (JMS), C++ and .NET app. Offers guaranteed delivery, security and transactions. It supports TCP, SSL & HTTP protocols.
Basic Installation Instructions
-------------------------------
1. Extract the MantaRay file under a directory of your choice.
From now on, this directory will be called MANTA_HOME.
2. Set the VM argument.
This argument should hold the path (full/relative) to the MantaRay configuration file.
The default name of the MantaRay configuration file is default_config.xml, and it is
located in config directory.
To set the argument add the following text in the VM execution command:
-DmantaConfig=
Example:
java -DmantaConfig=c:/mantaray1.9/default_config.xml MyApp
For further information on how to set the mantaConfig argument, see the MantaRay User Guide.
3. Optional: Set a name for the MantaRay domain.
The domain name is the name of the group to which the peer will be related.
Setting this parameter prevents collisions between peers that dont share the group.
To change the domain name, set the value of the tag MY-PEER.DOMAIN in the MantaRay
configuration file.
For further information about the domain parameter, see the MantaRay User Guide.
4. Optional: Set MantaRay peer name in the configuration file of MantaRay.
Each MantaRay peer needs to have a unique name. To change the peer name, set the
value of the tag MY-PEER.NAME in the MantaRay configuration file.
By default, MantaRay sets the peer name according to the following format:
m
Example:
Local resolved IP: 192.168.1.44
Free port (in port range): 6600
The name of the MantaRay peer: m192.168.1.446600
For further information about the peer name parameter, see the MantaRay User Guide.
5. Optional: Change the mulicast IP address and multicast port.
These parameters are used when one enables the MantaRay Auto Discovery plugin (default).
Changing this parameter for each MantaRay peer in the same domain assures that all
the peers in the same domain are discovered, and that peers that dont belong to that
domain will not be discovered and will not interfere.
<<lessBasic Installation Instructions
-------------------------------
1. Extract the MantaRay file under a directory of your choice.
From now on, this directory will be called MANTA_HOME.
2. Set the VM argument.
This argument should hold the path (full/relative) to the MantaRay configuration file.
The default name of the MantaRay configuration file is default_config.xml, and it is
located in config directory.
To set the argument add the following text in the VM execution command:
-DmantaConfig=
Example:
java -DmantaConfig=c:/mantaray1.9/default_config.xml MyApp
For further information on how to set the mantaConfig argument, see the MantaRay User Guide.
3. Optional: Set a name for the MantaRay domain.
The domain name is the name of the group to which the peer will be related.
Setting this parameter prevents collisions between peers that dont share the group.
To change the domain name, set the value of the tag MY-PEER.DOMAIN in the MantaRay
configuration file.
For further information about the domain parameter, see the MantaRay User Guide.
4. Optional: Set MantaRay peer name in the configuration file of MantaRay.
Each MantaRay peer needs to have a unique name. To change the peer name, set the
value of the tag MY-PEER.NAME in the MantaRay configuration file.
By default, MantaRay sets the peer name according to the following format:
m
Example:
Local resolved IP: 192.168.1.44
Free port (in port range): 6600
The name of the MantaRay peer: m192.168.1.446600
For further information about the peer name parameter, see the MantaRay User Guide.
5. Optional: Change the mulicast IP address and multicast port.
These parameters are used when one enables the MantaRay Auto Discovery plugin (default).
Changing this parameter for each MantaRay peer in the same domain assures that all
the peers in the same domain are discovered, and that peers that dont belong to that
domain will not be discovered and will not interfere.
Download (2.1MB)
Added: 2006-06-15 License: MPL (Mozilla Public License) Price:
1228 downloads
Open Java Console 1.6
Open Java Console is an extension which provides the ability to open the Java Console in Firefox. more>>
Open Java Console is an extension which provides the ability to open the Java Console in Firefox.
This extension provides an option on the Tools menu that opens the Java Console, and a toolbar button in the JavaScript Console that also allows the console to be opened. The extension also adds the keystroke Ctrl+Shift+J to spawn the console from the keyboard, from either a browser window or the JavaScript Console.
New features in 1.0 include the addition of two preferences:
A preference for logging a message to the JavaScript Console whenever the Java Console is triggered
A preference for showing any exceptions generated by the browser when starting the Java Console
Mozilla 1.X has this feature, but Firefox does not, making access to the console difficult unless this extension is used.
When the Console^2 extension is installed, the Ctrl+Shift+J keystroke will trigger the Error Console instead of the Java Console from a browser window. Ctrl+Shift+J will still work from the Error Console.
The following languages have been added to the 1.6 release: Hungarian and Dutch.
<<lessThis extension provides an option on the Tools menu that opens the Java Console, and a toolbar button in the JavaScript Console that also allows the console to be opened. The extension also adds the keystroke Ctrl+Shift+J to spawn the console from the keyboard, from either a browser window or the JavaScript Console.
New features in 1.0 include the addition of two preferences:
A preference for logging a message to the JavaScript Console whenever the Java Console is triggered
A preference for showing any exceptions generated by the browser when starting the Java Console
Mozilla 1.X has this feature, but Firefox does not, making access to the console difficult unless this extension is used.
When the Console^2 extension is installed, the Ctrl+Shift+J keystroke will trigger the Error Console instead of the Java Console from a browser window. Ctrl+Shift+J will still work from the Error Console.
The following languages have been added to the 1.6 release: Hungarian and Dutch.
Download (0.029MB)
Added: 2007-04-28 License: MPL (Mozilla Public License) Price:
1006 downloads
Jconsole 1.6
Jconsole is a JMX console for JBoss that provides a pre-built Web client for the JBoss application server. more>>
Jconsole is a JMX console for JBoss that provides a pre-built Web client for the JBoss application server.
It deploys the JMX features of JBoss.
Enhancements:
- Bugfixes and codebase updates were done.
<<lessIt deploys the JMX features of JBoss.
Enhancements:
- Bugfixes and codebase updates were done.
Download (0.19MB)
Added: 2006-06-22 License: GPL (GNU General Public License) Price:
749 downloads
Cmos password recovery tools 4.8
Cmos password recovery tools decrypts password stored in cmos used to access BIOS SETUP. more>>
Cmos password recovery tools decrypts password stored in cmos used to access BIOS SETUP.
Works with the following BIOSes:
- ACER/IBM BIOS
- AMI BIOS
- AMI WinBIOS 2.5
- Award 4.5x/4.6x/6.0
- Compaq (1992)
- Compaq (New version)
- IBM (PS/2, Activa, Thinkpad)
- Packard Bell
- Phoenix 1.00.09.AC0 (1994), a486 1.03, 1.04, 1.10 A03, 4.05 rev 1.02.943, 4.06 rev 1.13.1107
- Phoenix 4 release 6 (User)
- Gateway Solo - Phoenix 4.0 release 6
- Toshiba
- Zenith AMI
With CmosPwd, you can also backup, restore and erase/kill cmos.
AWARD 4.50 have a backdoor, a generic password : AWARD_SW SOYO motherboard have "SY_MB" as master password for Award 4.51. CmosPwd give equivalent passwords for Award BIOS, not original one.
CmosPwd works and compiles under:
- Dos-Win9x,
- Windows NT/W2K/XP/2003,
- Linux,
- FreeBSD and NetBSD.
Enhancements:
- This version adds support for the VAIO EEPROM and Samsung P25 CMOS.
<<lessWorks with the following BIOSes:
- ACER/IBM BIOS
- AMI BIOS
- AMI WinBIOS 2.5
- Award 4.5x/4.6x/6.0
- Compaq (1992)
- Compaq (New version)
- IBM (PS/2, Activa, Thinkpad)
- Packard Bell
- Phoenix 1.00.09.AC0 (1994), a486 1.03, 1.04, 1.10 A03, 4.05 rev 1.02.943, 4.06 rev 1.13.1107
- Phoenix 4 release 6 (User)
- Gateway Solo - Phoenix 4.0 release 6
- Toshiba
- Zenith AMI
With CmosPwd, you can also backup, restore and erase/kill cmos.
AWARD 4.50 have a backdoor, a generic password : AWARD_SW SOYO motherboard have "SY_MB" as master password for Award 4.51. CmosPwd give equivalent passwords for Award BIOS, not original one.
CmosPwd works and compiles under:
- Dos-Win9x,
- Windows NT/W2K/XP/2003,
- Linux,
- FreeBSD and NetBSD.
Enhancements:
- This version adds support for the VAIO EEPROM and Samsung P25 CMOS.
Download (0.034MB)
Added: 2006-03-24 License: GPL (GNU General Public License) Price:
1040 downloads
Internet DJ Console 0.7.0
Internet DJ console is a graphical shoutcast/icecast client that runs under GTK+ and the JACK audio connection kit. more>>
Internet DJ console is a graphical shoutcast and icecast client that runs under GTK+ and the JACK audio connection kit. In short, its an Internet radio app for making a live radio show.
Features include two main media players with a crossfader, a jingle player, microphone signal processing (compressor and noise gate), IRC track announcements with X-Chat, an automatic stream shut-off timer, MP3 or Ogg streaming at various bit rates, aux input for connecting any audio app that is compatible with JACK, and various audio level meters.
Enhancements:
- A new, more powerful streaming architecture has been implemented with multiple streams possible, greater control over quality settings, ability to change the bitrate live on air, and the ability to stream from a prerecorded file with the metadata preserved.
- The MP3=UTF8 option has been removed, and CPU load is now reduced when the microphone is off.
<<lessFeatures include two main media players with a crossfader, a jingle player, microphone signal processing (compressor and noise gate), IRC track announcements with X-Chat, an automatic stream shut-off timer, MP3 or Ogg streaming at various bit rates, aux input for connecting any audio app that is compatible with JACK, and various audio level meters.
Enhancements:
- A new, more powerful streaming architecture has been implemented with multiple streams possible, greater control over quality settings, ability to change the bitrate live on air, and the ability to stream from a prerecorded file with the metadata preserved.
- The MP3=UTF8 option has been removed, and CPU load is now reduced when the microphone is off.
Download (0.59MB)
Added: 2007-08-11 License: GPL (GNU General Public License) Price:
830 downloads
Other version of Internet DJ Console
Internet DJ Console is a program that I started writing in March of 2005 after discovering the ... The result isLicense:Freeware
Virtual Console init 2.0.1
Virtual Console init is an /sbin/init clone for virtual consoles. more>>
Virtual Console init is an /sbin/init clone for virtual consoles. It is very easy to set up and use because it has no configuration files.
It is very small and has builtin getty, login, klogd, and slogd. Virtual Console init is suitable for embedded systems and home Linux boxes.
This is a new kind of "init" that only works for the virtual console, so dont try it to login from a serial line. The idea is having a very simple init for home Linux systems (although it could work on other systems as well, who knows...), allowing for a simpler and cleaner configuration. It is useful too in embedded systems or tiny boot disks (maybe as a complement for "busybox"). In other words: it works for me, I use it and Im releasing it in the hope of it being useful for others.
The binary itself doesnt accept parameters, so lets go directly to the behaviour... It must be run by "root" and have PID 1, so dont try to run it yourself, it wont work... You should install it under "/sbin/init", and the kernel will run it automatically at boot.
Take into account that this "init" has both the "getty" and "login" parts built-in, not as separate binaries. This means that if you have a server or another binary which needs "/bin/login", it probably WONT WORK. The sysklog system (kernel logger and system logger, "klogd" and "slogd") are built-in, too. You dont need sysklogd or equivalent, unless you want some feature of them... In that case, you can disable the builtin system.
Enhancements:
- vcinit is now licensed under the GPLv2 only, and not necessarily any later version of the GPL.
<<lessIt is very small and has builtin getty, login, klogd, and slogd. Virtual Console init is suitable for embedded systems and home Linux boxes.
This is a new kind of "init" that only works for the virtual console, so dont try it to login from a serial line. The idea is having a very simple init for home Linux systems (although it could work on other systems as well, who knows...), allowing for a simpler and cleaner configuration. It is useful too in embedded systems or tiny boot disks (maybe as a complement for "busybox"). In other words: it works for me, I use it and Im releasing it in the hope of it being useful for others.
The binary itself doesnt accept parameters, so lets go directly to the behaviour... It must be run by "root" and have PID 1, so dont try to run it yourself, it wont work... You should install it under "/sbin/init", and the kernel will run it automatically at boot.
Take into account that this "init" has both the "getty" and "login" parts built-in, not as separate binaries. This means that if you have a server or another binary which needs "/bin/login", it probably WONT WORK. The sysklog system (kernel logger and system logger, "klogd" and "slogd") are built-in, too. You dont need sysklogd or equivalent, unless you want some feature of them... In that case, you can disable the builtin system.
Enhancements:
- vcinit is now licensed under the GPLv2 only, and not necessarily any later version of the GPL.
Download (0.040MB)
Added: 2006-09-25 License: GPL (GNU General Public License) Price:
1131 downloads
Quiet Console Town 0.7
Quiet Console Town is a console RPG city simulator. more>>
Quiet Console Town project is a console RPG city simulator.
Console RPGs have you visiting towns all the time, but Quiet Console Town puts you in the place of the mayor of a budding new city. Build shops, attract adventurers, hope villains overlook you: all the aspects of a console RPG town are yours.
Welcome to your everyday ordinary quiet console town. By the looks of your deceased friend there, youll probably want to stay a night at the Inn. Yes, those puncture wounds and missing organs certainly seem fatal, but all he needs is a good nights sleep and then (somehow) hell be good as new. In the meantime, might I direct you to our armor shop?
A bit of plate inbetween you and the monster might help you stay healthy! I see your thief seems anxious - theres some shady characters near the magic shop she might want to meet up with. Finally, once youre all done, perhaps you could look into the matter of our haunted mine...?
Quiet Console Town is a turn-based console RPG city simulator. You, as mayor, build the kind of RPG town youve always wanted heroes to visit. Buildings range from the simple Inn to the intricate dungeons beneath your mighty Citadel.
People can be as good as the most pious do-gooder, or evil as the most black-hearted villain. Make your city a bulwark against the forces of darkness, or a haven to shady characters round the world!
<<lessConsole RPGs have you visiting towns all the time, but Quiet Console Town puts you in the place of the mayor of a budding new city. Build shops, attract adventurers, hope villains overlook you: all the aspects of a console RPG town are yours.
Welcome to your everyday ordinary quiet console town. By the looks of your deceased friend there, youll probably want to stay a night at the Inn. Yes, those puncture wounds and missing organs certainly seem fatal, but all he needs is a good nights sleep and then (somehow) hell be good as new. In the meantime, might I direct you to our armor shop?
A bit of plate inbetween you and the monster might help you stay healthy! I see your thief seems anxious - theres some shady characters near the magic shop she might want to meet up with. Finally, once youre all done, perhaps you could look into the matter of our haunted mine...?
Quiet Console Town is a turn-based console RPG city simulator. You, as mayor, build the kind of RPG town youve always wanted heroes to visit. Buildings range from the simple Inn to the intricate dungeons beneath your mighty Citadel.
People can be as good as the most pious do-gooder, or evil as the most black-hearted villain. Make your city a bulwark against the forces of darkness, or a haven to shady characters round the world!
Download (MB)
Added: 2007-01-12 License: GPL (GNU General Public License) Price:
1019 downloads
Kaboot Recovery 0.1.1.1
Kaboot Linux Operating system aims to provide an operating system which you can take anywhere. more>>
Kaboot Linux Operating system aims to provide an operating system which you can take anywhere and has all your favourite programs on.
Kaboot operating system is avaliable as a Live CD or Live USB you can take with you anywhere.
A number of different versions are avaliable, two optimised for size or speed, one for functionality, and one science based.
All containing a host of useful programs able to boot virtually any computer (meeting the minimum requirements) from CD and
USB.Kaboot is still in active development and if you find a bug or fix, you can let me know in the forums.
Enhancements:
- A network bug was fixed.
- A few debugging utilities were added.
- Hotplugging was implemented.
<<lessKaboot operating system is avaliable as a Live CD or Live USB you can take with you anywhere.
A number of different versions are avaliable, two optimised for size or speed, one for functionality, and one science based.
All containing a host of useful programs able to boot virtually any computer (meeting the minimum requirements) from CD and
USB.Kaboot is still in active development and if you find a bug or fix, you can let me know in the forums.
Enhancements:
- A network bug was fixed.
- A few debugging utilities were added.
- Hotplugging was implemented.
Download (87.2MB)
Added: 2005-12-12 License: GPL (GNU General Public License) Price:
1414 downloads
Games::Console 0.04
Games::Console Perl module provide a 2D quake style in-game console. more>>
Games::Console Perl module provide a 2D quake style in-game console.
SYNOPSIS
use Games::Console;
my $console = Games::Console->new(
font => $font_object,
background_color => [ 1,1,0],
background_alpha => 0.4,
text_color => [ 1,1,1 ],
text_alpha => 1,
speed => 50, # in percent per second
height => 50, # fully opened, in percent of screen
width => 100, # fully opened, in percent of screen
backbuffer_size => 100, # keep so many messages
prompt => >,
cursor => _,
);
$console->screen_width($width);
$console->screen_height($height);
$console->toggle($current_time);
$console->message(Hello there!);
$console->input(a);
This package provides you with a quake-style console for your games. The console gathers messages and lets you scroll trough them. It also can display a command line.
This package is just a base class setting up everything, but doesnt actually render anything.
See Games::Console::SDL and Games::Console::OpenGL for subclasses that implement the actual rendering to the screen via SDL and OpenGL, respectively.
<<lessSYNOPSIS
use Games::Console;
my $console = Games::Console->new(
font => $font_object,
background_color => [ 1,1,0],
background_alpha => 0.4,
text_color => [ 1,1,1 ],
text_alpha => 1,
speed => 50, # in percent per second
height => 50, # fully opened, in percent of screen
width => 100, # fully opened, in percent of screen
backbuffer_size => 100, # keep so many messages
prompt => >,
cursor => _,
);
$console->screen_width($width);
$console->screen_height($height);
$console->toggle($current_time);
$console->message(Hello there!);
$console->input(a);
This package provides you with a quake-style console for your games. The console gathers messages and lets you scroll trough them. It also can display a command line.
This package is just a base class setting up everything, but doesnt actually render anything.
See Games::Console::SDL and Games::Console::OpenGL for subclasses that implement the actual rendering to the screen via SDL and OpenGL, respectively.
Download (0.021MB)
Added: 2007-07-25 License: Perl Artistic License Price:
822 downloads
Make CD-ROM Recovery 0.9.7
Make CD-ROM Recovery is a disaster recovery CD-ROM maker. more>>
Make CD-ROM Recovery makes a bootable (El Torito) disaster recovery image (CDrec.iso), including backups of the linux system to the same CD-ROM (or CD-RW) if space permits, or to a multi-volume CD-ROM set. Otherwise, the backups can be stored on another local disk, NFS disk or (remote) tape.
After a disaster (disk crash or system intrusion) the system can be booted from the CD-ROM and one can restore the complete system as it was (at the time mkCDrec was run) with the command /etc/recovery/start-restore.sh
Disk cloning (clone-dsk.sh script) allows one to restore a disk to another disk (the destination disk does not have to be of the same size as it calculates the partition layout itself). A thrid script, restore-fs.sh, will restore only one filesystem to a partition of your choice, and the user can choose with which filesystem the partition has to be formatted.
Linux 2.2.x, 2.4.x and 2.6.x kernels are supported, and if size of the kernel is not too big a boot floppy can be made, otherwise a 2.88 Mb boot floppy will be emulated on CD-ROM.
MkCDrec supports ext2 , ext3, minix, xfs , jfs, reiserfs file systems, LVM and software RAID (multiple devices). Each file system is backed up as a compressed tar archive (including the tar log). The compress program used is the users choice (compress, gzip, bzip2, lzop,...)
But there is more: msdos, fat, vfat and ntfs mounted partitions are recognized and are saved as compressed dumps (on CD, tape, etc.)
The user has the possibility to encrypt all backups with openssl if desired (see the Config.sh configuration file for more information).
To restore your system completely just boot from the first CD-ROM made by mkCDrec and type "/etc/recovery/start-restore.sh " to restore everything from CD. Automatic Disaster Recovery and One Button Disaster Recovery are supported by mkCDrec too.
With the clone-dsk.sh script one can restore selective a disk or partitions to another free disk.
mkCDrec supports IDE (inclusive ATA), SCSI disks, hardware RAID based disks (e.g. Compaq SMART2 Disk Array), LVM and software RAID. With an El-Torito CD-ROM you can boot from an IDE or SCSI based CD-ROM drive on IA32/64, powermac and x86_64 GNU/Linux based computer systems only.
<<lessAfter a disaster (disk crash or system intrusion) the system can be booted from the CD-ROM and one can restore the complete system as it was (at the time mkCDrec was run) with the command /etc/recovery/start-restore.sh
Disk cloning (clone-dsk.sh script) allows one to restore a disk to another disk (the destination disk does not have to be of the same size as it calculates the partition layout itself). A thrid script, restore-fs.sh, will restore only one filesystem to a partition of your choice, and the user can choose with which filesystem the partition has to be formatted.
Linux 2.2.x, 2.4.x and 2.6.x kernels are supported, and if size of the kernel is not too big a boot floppy can be made, otherwise a 2.88 Mb boot floppy will be emulated on CD-ROM.
MkCDrec supports ext2 , ext3, minix, xfs , jfs, reiserfs file systems, LVM and software RAID (multiple devices). Each file system is backed up as a compressed tar archive (including the tar log). The compress program used is the users choice (compress, gzip, bzip2, lzop,...)
But there is more: msdos, fat, vfat and ntfs mounted partitions are recognized and are saved as compressed dumps (on CD, tape, etc.)
The user has the possibility to encrypt all backups with openssl if desired (see the Config.sh configuration file for more information).
To restore your system completely just boot from the first CD-ROM made by mkCDrec and type "/etc/recovery/start-restore.sh " to restore everything from CD. Automatic Disaster Recovery and One Button Disaster Recovery are supported by mkCDrec too.
With the clone-dsk.sh script one can restore selective a disk or partitions to another free disk.
mkCDrec supports IDE (inclusive ATA), SCSI disks, hardware RAID based disks (e.g. Compaq SMART2 Disk Array), LVM and software RAID. With an El-Torito CD-ROM you can boot from an IDE or SCSI based CD-ROM drive on IA32/64, powermac and x86_64 GNU/Linux based computer systems only.
Download (0.76MB)
Added: 2007-06-19 License: GPL (GNU General Public License) Price:
867 downloads
Poisson Media Recovery 0.03
Poisson Media Recovery project can be used to retrieve slightly damaged files from CD-ROM media. more>>
Poisson Media Recovery project can be used to retrieve slightly damaged files from CD-ROM media.
It sequentially mounts and umounts the device, and on each mount it tries to read as many new 512 byte sectors as possible.
I was able to use this tool to save some files from old CDs.
<<lessIt sequentially mounts and umounts the device, and on each mount it tries to read as many new 512 byte sectors as possible.
I was able to use this tool to save some files from old CDs.
Download (0.002MB)
Added: 2007-08-22 License: Public Domain Price:
797 downloads
Raw Socket Constructor 2.1a
Raw Socket Constructor provides a tool for sending packets from the console. more>>
Raw Socket Constructor provides a tool for sending packets from the console.
Raw Socket Constructor is a tool that uses the Libsock library to create arbitrary TCP, ICMP, UDP, TCP6, ICMP6, or UDP6 packets.
<<lessRaw Socket Constructor is a tool that uses the Libsock library to create arbitrary TCP, ICMP, UDP, TCP6, ICMP6, or UDP6 packets.
Download (0.008MB)
Added: 2007-03-22 License: GPL (GNU General Public License) Price:
950 downloads
Crash Recovery Kit for Linux 2.6.11.10
Crash Recovery Kit for Linux is a Linux distribution for system recovery. more>>
Crash Recovery for Linux sounds a bit superfluous. Linux is regarded as one of todays most stable Operating Systems. In the case of some hardware failure like a broken disk it can however be handy.
Of course your machine doesnt have to have linux installed to make use of the CRK kit. There are several uses and purposes for the CRK to be used. To name a few :
- recovery of a trashed LILO boot record. How many times does it happen that some person installs windows 98/95 after he/she installed linux? Well in that case windows 9X just overwrites the MBR record and linux wont be able to boot anymore.
- backup over the network in the form of tar.gz tarballs. Both FAT16, FAT32, ext2 and all filesystems which Linux supports in a read/write fashion can be taken care of. The strong part of the CRK is when a disk is replaced or repartitioning is being done. The CRK boots a complete mini linux with networking where all possible hardware which is inside the Linux kernel is available.
- Testing hardware of new intel based machines.
- Detecting versions and types of hardware. The Linux kernel holds a large database of hardware supported. Booting a linux kernel doesnt only resolve if the hardware is ok, it also show its specs. This can be handy if one wants to check-out an old/new PC which is for sale.
- Recovery of a misconfigured or hacked Linux system. Well that can happen. /etc/fstab can be wrong or the root password is unknown etc.
- make a tape backup of a disk which cant be booted anymore.
The CRK is based on RedHat Linux. I have always used RedHat systems, thats why. When my system needed maintenance the rescue floppy image which RedHat supplies didnt fullfill my needs.
Thats why i created the CRK. Lately i use Mandrake. How and why the CRK was created read the short history. The CRK is licensed under the GNU Public License (GPL).
<<lessOf course your machine doesnt have to have linux installed to make use of the CRK kit. There are several uses and purposes for the CRK to be used. To name a few :
- recovery of a trashed LILO boot record. How many times does it happen that some person installs windows 98/95 after he/she installed linux? Well in that case windows 9X just overwrites the MBR record and linux wont be able to boot anymore.
- backup over the network in the form of tar.gz tarballs. Both FAT16, FAT32, ext2 and all filesystems which Linux supports in a read/write fashion can be taken care of. The strong part of the CRK is when a disk is replaced or repartitioning is being done. The CRK boots a complete mini linux with networking where all possible hardware which is inside the Linux kernel is available.
- Testing hardware of new intel based machines.
- Detecting versions and types of hardware. The Linux kernel holds a large database of hardware supported. Booting a linux kernel doesnt only resolve if the hardware is ok, it also show its specs. This can be handy if one wants to check-out an old/new PC which is for sale.
- Recovery of a misconfigured or hacked Linux system. Well that can happen. /etc/fstab can be wrong or the root password is unknown etc.
- make a tape backup of a disk which cant be booted anymore.
The CRK is based on RedHat Linux. I have always used RedHat systems, thats why. When my system needed maintenance the rescue floppy image which RedHat supplies didnt fullfill my needs.
Thats why i created the CRK. Lately i use Mandrake. How and why the CRK was created read the short history. The CRK is licensed under the GNU Public License (GPL).
Download (38.1MB)
Added: 2005-10-14 License: GPL (GNU General Public License) Price:
1479 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above recovery console search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
