rar archiver 7 zip
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 1570
Scam-Archiver 0.1
Scam-Archiver copies all mail going through your mail server to a mailbox. more>>
Scam-Archiver project copies all mail going through your mail server to a mailbox. This feature is useful for archiving email.
NOTICE
Scam-archiver should only be used if its features is in full compliance with local laws and regulations regarding electronic communication and email.
Installation
Please read the INSTALL and README files for more information.
Prerequisites
You should have sendmail version 8.12.x or higher installed. Sendmail should have been built with MILTER support enabled.
You should have the milter library and development kit installed
Build
1. Extract the scam-archiver tarball
2. Change the current directory to the one where the scam-archiver source code was extracted.
3. If you are using FreeBSD, OpenBSD or NetBSD, rename the Makefile.bsd file to Makefile
If you are using a Linux distribution, rename the Makefile.linux file to Makefile
4. Type make and press Enter to compile scam-archiver
Install
1. Copy the scam-archiver file created above to the appropriate location (/usr/local/sbin for example)
2. Generate a new sendmail configuration (sendmail.cf) with the following additional settings:
INPUT_MAIL_FILTER(`scam-archiver, `S=unix:/var/spool/scam/scam-archiver.sock, F=T, T=S:240s;R:240s;E:5m)dnl
3. Create a user (scamarchiver for example) which will be used to run the milter
4. Create the /var/spool/scam directory
5. Verify that the user created in step 3 has read-write access to the /var/spool/scam directory
Using Scam-archiver
Startup
1. Start scam-archiver milter as a daemon scam-archiver -p unix:/var/spool/scam/scam-archiver.sock -u scamarchiver -D
4. Restart sendmail if you have generated a new sendmail configuration when installing scam-archiver
Shutdown
Type the following command to stop scam-archiver kill -USR1 `cat /var/spool/scam/scam-archiver.pid`
Configuration
The configuration file used is /etc/mail/scam.conf.
The following entry defines the email address where all mail is archived.
AchiverAddr=scam@example.com
<<lessNOTICE
Scam-archiver should only be used if its features is in full compliance with local laws and regulations regarding electronic communication and email.
Installation
Please read the INSTALL and README files for more information.
Prerequisites
You should have sendmail version 8.12.x or higher installed. Sendmail should have been built with MILTER support enabled.
You should have the milter library and development kit installed
Build
1. Extract the scam-archiver tarball
2. Change the current directory to the one where the scam-archiver source code was extracted.
3. If you are using FreeBSD, OpenBSD or NetBSD, rename the Makefile.bsd file to Makefile
If you are using a Linux distribution, rename the Makefile.linux file to Makefile
4. Type make and press Enter to compile scam-archiver
Install
1. Copy the scam-archiver file created above to the appropriate location (/usr/local/sbin for example)
2. Generate a new sendmail configuration (sendmail.cf) with the following additional settings:
INPUT_MAIL_FILTER(`scam-archiver, `S=unix:/var/spool/scam/scam-archiver.sock, F=T, T=S:240s;R:240s;E:5m)dnl
3. Create a user (scamarchiver for example) which will be used to run the milter
4. Create the /var/spool/scam directory
5. Verify that the user created in step 3 has read-write access to the /var/spool/scam directory
Using Scam-archiver
Startup
1. Start scam-archiver milter as a daemon scam-archiver -p unix:/var/spool/scam/scam-archiver.sock -u scamarchiver -D
4. Restart sendmail if you have generated a new sendmail configuration when installing scam-archiver
Shutdown
Type the following command to stop scam-archiver kill -USR1 `cat /var/spool/scam/scam-archiver.pid`
Configuration
The configuration file used is /etc/mail/scam.conf.
The following entry defines the email address where all mail is archived.
AchiverAddr=scam@example.com
Download (0.006MB)
Added: 2007-02-20 License: GPL (GNU General Public License) Price:
977 downloads
Archive::Zip 1.20
Archive::Zip is a Perl module which provides an interface to ZIP archive files. more>>
Archive::Zip is a Perl module which provides an interface to ZIP archive files.
SYNOPSIS
# Create a Zip file
use Archive::Zip qw( :ERROR_CODES :CONSTANTS );
my $zip = Archive::Zip->new();
# Add a directory
my $dir_member = $zip->addDirectory( dirname/ );
# Add a file from a string with compression
my $string_member = $zip->addString( This is a test, stringMember.txt );
$string_member->desiredCompressionMethod( COMPRESSION_DEFLATED );
# Add a file from disk
my $file_member = $zip->addFile( xyz.pl, AnotherName.pl );
# Save the Zip file
unless ( $zip->writeToFileNamed(someZip.zip) == AZ_OK ) {
die write error;
}
# Read a Zip file
my $somezip = Archive::Zip->new();
unless ( $somezip->read( someZip.zip ) == AZ_OK ) {
die read error;
}
# Change the compression type for a file in the Zip
my $member = $somezip->memberNamed( stringMember.txt );
$member->desiredCompressionMethod( COMPRESSION_STORED );
unless ( $zip->writeToFileNamed( someOtherZip.zip ) == AZ_OK ) {
die write error;
}
The Archive::Zip module allows a Perl program to create, manipulate, read, and write Zip archive files.
Zip archives can be created, or you can read from existing zip files.
Once created, they can be written to files, streams, or strings. Members can be added, removed, extracted, replaced, rearranged, and enumerated. They can also be renamed or have their dates, comments, or other attributes queried or modified. Their data can be compressed or uncompressed as needed.
Members can be created from members in existing Zip files, or from existing directories, files, or strings.
This module uses the Compress::Zlib library to read and write the compressed streams inside the files.
<<lessSYNOPSIS
# Create a Zip file
use Archive::Zip qw( :ERROR_CODES :CONSTANTS );
my $zip = Archive::Zip->new();
# Add a directory
my $dir_member = $zip->addDirectory( dirname/ );
# Add a file from a string with compression
my $string_member = $zip->addString( This is a test, stringMember.txt );
$string_member->desiredCompressionMethod( COMPRESSION_DEFLATED );
# Add a file from disk
my $file_member = $zip->addFile( xyz.pl, AnotherName.pl );
# Save the Zip file
unless ( $zip->writeToFileNamed(someZip.zip) == AZ_OK ) {
die write error;
}
# Read a Zip file
my $somezip = Archive::Zip->new();
unless ( $somezip->read( someZip.zip ) == AZ_OK ) {
die read error;
}
# Change the compression type for a file in the Zip
my $member = $somezip->memberNamed( stringMember.txt );
$member->desiredCompressionMethod( COMPRESSION_STORED );
unless ( $zip->writeToFileNamed( someOtherZip.zip ) == AZ_OK ) {
die write error;
}
The Archive::Zip module allows a Perl program to create, manipulate, read, and write Zip archive files.
Zip archives can be created, or you can read from existing zip files.
Once created, they can be written to files, streams, or strings. Members can be added, removed, extracted, replaced, rearranged, and enumerated. They can also be renamed or have their dates, comments, or other attributes queried or modified. Their data can be compressed or uncompressed as needed.
Members can be created from members in existing Zip files, or from existing directories, files, or strings.
This module uses the Compress::Zlib library to read and write the compressed streams inside the files.
Download (0.17MB)
Added: 2007-07-03 License: Perl Artistic License Price:
852 downloads
Yahoo Group Archiver 1.8
Yahoo! Group Archiver is a command line utility to interact with Yahoo! Groups. more>>
Yahoo Group Archiver project is a collection of scripts to interact with Yahoo Groups and download various sections of each group to your local workspace.
Currently the following scripts are being actively supported:
- yahoogroup-messages
- yahoogroup-files
- yahoogroup-photos
- yahoogroup-members
Main features:
yahoogroup-messages
- Downloads all the messages from a group in the order in which they were received.
- Note: Yahoo has user based and group based limits on the number of messages you can download
yahoogroup-files
- Downloads all the content from the Files section in a group maintaining the heirarchy as present on the website
- Note: Yahoo has user based and group based limits on the number of files you can download
yahoogroup-photos
- Downloads all the content from the Photos section in a group maintaining the heirarchy as present on the website
- Note: Yahoo has user based and group based limits on the number of images you can download
yahoogroup-members
- Extract the members list and output it as a tab separated data.
- Note: MS Excel users may read this data by redirecting it to a file with a extension .xls
Enhancements:
- Yahoo! has made HTTPS-based login mandatory, and the script has been updated with the new Yahoo! Group HTML layout.
<<lessCurrently the following scripts are being actively supported:
- yahoogroup-messages
- yahoogroup-files
- yahoogroup-photos
- yahoogroup-members
Main features:
yahoogroup-messages
- Downloads all the messages from a group in the order in which they were received.
- Note: Yahoo has user based and group based limits on the number of messages you can download
yahoogroup-files
- Downloads all the content from the Files section in a group maintaining the heirarchy as present on the website
- Note: Yahoo has user based and group based limits on the number of files you can download
yahoogroup-photos
- Downloads all the content from the Photos section in a group maintaining the heirarchy as present on the website
- Note: Yahoo has user based and group based limits on the number of images you can download
yahoogroup-members
- Extract the members list and output it as a tab separated data.
- Note: MS Excel users may read this data by redirecting it to a file with a extension .xls
Enhancements:
- Yahoo! has made HTTPS-based login mandatory, and the script has been updated with the new Yahoo! Group HTML layout.
Download (0.012MB)
Added: 2007-02-01 License: GPL (GNU General Public License) Price:
1000 downloads
Xarchiver 0.4.6
Xarchiver is a GTK2 only frontend to rar,zip,tar,bzip and gzip. more>>
Xarchiver is a GTK2 only frontend to rar, zip, tar, bzip and gzip.
Xarchiver is a gtk+2 ONLY frontend to zip,rar,tar,bzip2 and gzip. Future releases will support 7zip and distro based packages (rpm,deb).
Xarchiver allows you to create,add, extract and delete files in the above formats.
<<lessXarchiver is a gtk+2 ONLY frontend to zip,rar,tar,bzip2 and gzip. Future releases will support 7zip and distro based packages (rpm,deb).
Xarchiver allows you to create,add, extract and delete files in the above formats.
Download (0.37MB)
Added: 2006-11-28 License: GPL (GNU General Public License) Price:
1079 downloads
Archive::Rar 1.9
Archive::Rar is a interface with the rar command. more>>
Archive::Rar is a interface with the rar command.
SYNOPSIS
use Archive::Rar;
my $rar =new Archive::Rar();
$rar->Add(
-size => $size_of_parts,
-archive => $archive_filename,
-files => @list_of_files,
);
This is a module for the handling of rar archives.
Locates the rar command (from PATH or from regedit for Win32) and encapsulate it to create, extract and list rar archives.
At the moment these methods are implemented:
new()
Returns a new Rar object. You can pass defaults options.
Add(%options)
Add file to an archive.
Extract(%options)
Extract the contains of an archive.
List(%options)
Fill the list variable of the object whith the index of an archive.
OPTIONS
-archive
Archive filename.
-files
List of files to add. You can use a scalar value or an array reference.
-quiet
No output for the rar command if True.
-sfx
Create self-extracting archive.
-size
Size of the parts in bytes.
-verbose
Level of verbosity.
<<lessSYNOPSIS
use Archive::Rar;
my $rar =new Archive::Rar();
$rar->Add(
-size => $size_of_parts,
-archive => $archive_filename,
-files => @list_of_files,
);
This is a module for the handling of rar archives.
Locates the rar command (from PATH or from regedit for Win32) and encapsulate it to create, extract and list rar archives.
At the moment these methods are implemented:
new()
Returns a new Rar object. You can pass defaults options.
Add(%options)
Add file to an archive.
Extract(%options)
Extract the contains of an archive.
List(%options)
Fill the list variable of the object whith the index of an archive.
OPTIONS
-archive
Archive filename.
-files
List of files to add. You can use a scalar value or an array reference.
-quiet
No output for the rar command if True.
-sfx
Create self-extracting archive.
-size
Size of the parts in bytes.
-verbose
Level of verbosity.
Download (0.008MB)
Added: 2006-06-28 License: Perl Artistic License Price:
1252 downloads
KDar - the KDE Disk archiver 2.0.7
K Disk archiver (KDar) is a KDE GUI-based backup and archiving program. more>> <<less
Download (1.7MB)
Added: 2005-09-30 License: GPL (GNU General Public License) Price:
1490 downloads
Document Archiver 1.0.1
Document Archiver allows automatic archiving of documents. more>>
Document Archiver allows automatic archiving of documents.
The Document Archiver is a standalone Java application which should be scheduled to run nightly to facilitate the automatic archiving of documents in the KnowledgeTree DMS.
The programs checks if any documents are due to be archived, based on the Date or Utilisation criteria set in the web application (e.g. archive after 2 months, or archive 15 days after the last download).
<<lessThe Document Archiver is a standalone Java application which should be scheduled to run nightly to facilitate the automatic archiving of documents in the KnowledgeTree DMS.
The programs checks if any documents are due to be archived, based on the Date or Utilisation criteria set in the web application (e.g. archive after 2 months, or archive 15 days after the last download).
Download (0.54MB)
Added: 2007-02-07 License: Other/Proprietary License Price:
989 downloads
psArchive 0.1.2
psArchive is a PHP 5 extension designed to provide an easy to use interface for manipulating all the most common archives. more>>
psArchive is a PHP 5 extension designed to provide an easy to use interface for manipulating all the most common archive files used in Web projects at high speeds and workloads.
psArchive is especially designed for Web applications that need to understand, to produce, or even edit archives in order to function.
Main features:
Supports archive *editing*! You can add, remove, rename and copy files, you can change file contents, attributes and modification time, you can create new files and directories, *all* right inside the archive before output.
Supports the following archive formats:
- 1. ZIP (single volumes);
- 2. TAR (tarball tape archive);
- 3. GZ (Gzip compressed format);
- 4. BZ, BZ2 (Bzip/Bzip2 compressed format);
- 5. TAR.GZ, TGZ (Gzipped Tarball);
- 6. TAR.BZ2, TAR.BZ, TBZ2, TBZ (Bzipped Tarball);
- 7. Other formats can be supported on demand, such as RAR or ACE support (since these formats are uncommon in web environments we decided not to include them in order to keep the extension size as small as possible);
Configurable buffer storage for optimized and threadsafe memory handling:
- 1. In raw memory (for optimized speed);
- 2. In compressed memory (normal operation);
- 3. On disk (for optimized memory consumption);
Provides 2 functions for extremely fast in memory data compression / decompression using LZF algorithm. These functions correctly compress / decompress data blocks far greater than 1024 bytes;
<<lesspsArchive is especially designed for Web applications that need to understand, to produce, or even edit archives in order to function.
Main features:
Supports archive *editing*! You can add, remove, rename and copy files, you can change file contents, attributes and modification time, you can create new files and directories, *all* right inside the archive before output.
Supports the following archive formats:
- 1. ZIP (single volumes);
- 2. TAR (tarball tape archive);
- 3. GZ (Gzip compressed format);
- 4. BZ, BZ2 (Bzip/Bzip2 compressed format);
- 5. TAR.GZ, TGZ (Gzipped Tarball);
- 6. TAR.BZ2, TAR.BZ, TBZ2, TBZ (Bzipped Tarball);
- 7. Other formats can be supported on demand, such as RAR or ACE support (since these formats are uncommon in web environments we decided not to include them in order to keep the extension size as small as possible);
Configurable buffer storage for optimized and threadsafe memory handling:
- 1. In raw memory (for optimized speed);
- 2. In compressed memory (normal operation);
- 3. On disk (for optimized memory consumption);
Provides 2 functions for extremely fast in memory data compression / decompression using LZF algorithm. These functions correctly compress / decompress data blocks far greater than 1024 bytes;
Download (0.56MB)
Added: 2006-07-14 License: LGPL (GNU Lesser General Public License) Price:
1198 downloads
XArchive 0.2.8-6
XArchive is a generic front-end that uses external wrappers around command line archiving tools. more>>
XArchive is a generic front end for archives that uses external wrappers around the command line tools. XArchive checks its wrapper directory when it starts, consulting each wrapper found to see what file types are supported.
Thus, a new archive format can easily be supported by just writing a wrapper for it and dropping it in the wrappers directory.
Currently there are bash shell wrappers for: rar, tar, zip, and ace
(ace supported using unace, so only reading and extracting available).
These can easily be copied and modified to have xarchive support other command line tools and file types without having to touch xarchive at all.
Enhancements:
- This version supports adding files to an archive using Drag n Drog, and has a few GUI clean ups.
<<lessThus, a new archive format can easily be supported by just writing a wrapper for it and dropping it in the wrappers directory.
Currently there are bash shell wrappers for: rar, tar, zip, and ace
(ace supported using unace, so only reading and extracting available).
These can easily be copied and modified to have xarchive support other command line tools and file types without having to touch xarchive at all.
Enhancements:
- This version supports adding files to an archive using Drag n Drog, and has a few GUI clean ups.
Download (0.052MB)
Added: 2006-02-27 License: GPL (GNU General Public License) Price:
1339 downloads
Archive::Builder 1.06
Archive::Builder is a file generation and archiving framework. more>>
Archive::Builder is a file generation and archiving framework.
SYNOPSIS
# Make a builder with one section, and some files
my $Builder = Archive::Builder->new;
my $Section = $Builder->new_section( html );
$Section->add_file( one.html, string, qq~
Hello World!
~ );
$Section->add_file( two.html, file, ./source/file.html );
$Section->add_file( three.html, Custom::function, @args );
# Generate and save to disk
$Builder->save( ./somewhere );
# Create an zip file from it and save it.
my $Archive = $Builder->archive( zip ).
$Archive->save( foo.zip );
# Create a tar.gz file of just one section
my $Tar = $Section->archive( tar.gz );
Perl is often used for applications that generate large numbers of files, and Archive::Builder is designed to assist in these sorts of tasks.
It provides a framework for defining a set of files, and how they will be generated, and a series of methods for turning them into an Archive of varying types, or saving directly to disk.
<<lessSYNOPSIS
# Make a builder with one section, and some files
my $Builder = Archive::Builder->new;
my $Section = $Builder->new_section( html );
$Section->add_file( one.html, string, qq~
Hello World!
~ );
$Section->add_file( two.html, file, ./source/file.html );
$Section->add_file( three.html, Custom::function, @args );
# Generate and save to disk
$Builder->save( ./somewhere );
# Create an zip file from it and save it.
my $Archive = $Builder->archive( zip ).
$Archive->save( foo.zip );
# Create a tar.gz file of just one section
my $Tar = $Section->archive( tar.gz );
Perl is often used for applications that generate large numbers of files, and Archive::Builder is designed to assist in these sorts of tasks.
It provides a framework for defining a set of files, and how they will be generated, and a series of methods for turning them into an Archive of varying types, or saving directly to disk.
Download (0.050MB)
Added: 2006-06-28 License: Perl Artistic License Price:
1213 downloads
archivemail 0.7.0
archivemail is an archiver and compressor for old email messages. more>>
archivemail is a tool written in Python for archiving and compressing old email in mailboxes. archivemail can move messages older than the specified number of days to a separate mbox format mailbox that is compressed with gzip, or optionally just delete old email.
Maybe some of your mailboxes are quite large (eg, over 10,000 messages) and they are taking a while to load in your mail reader. Perhaps they are taking up too much space on your disk. Archiving old messages to a separate, compressed mailbox will mean:
1. Your mail reader will get a huge performance boost loading and reading your mail.
2. You will be taking up less disk space, since old mail will be compressed. (Mail usually compresses quite nicely.)
3. You wont be confronted with semi-obsolete mail all the time.
If you would prefer to just delete old email rather than archive it, archivemail can do that too.
Main features:
- Support for archiving IMAP, mbox, MH and maildir format mailboxes.
- You can configure the amount of days before mail is considered old -- with the default being 180 days.
- Messages that are flagged important are not archived or deleted unless you specify the --include-flagged option.
- Optionally warn about duplicate Message-IDs in a mailbox.
- You can specify an option so that unread mail is never archived.
- Allows you to store the compressed archive mailboxes in a directory of your choice, with an extension of your choice.
- Support for deleting old mail rather than archiving it.
- Optional ability to archive messages older than an absolute date with the --date option.
- Ability to only archive messages over a certain byte size.
<<lessMaybe some of your mailboxes are quite large (eg, over 10,000 messages) and they are taking a while to load in your mail reader. Perhaps they are taking up too much space on your disk. Archiving old messages to a separate, compressed mailbox will mean:
1. Your mail reader will get a huge performance boost loading and reading your mail.
2. You will be taking up less disk space, since old mail will be compressed. (Mail usually compresses quite nicely.)
3. You wont be confronted with semi-obsolete mail all the time.
If you would prefer to just delete old email rather than archive it, archivemail can do that too.
Main features:
- Support for archiving IMAP, mbox, MH and maildir format mailboxes.
- You can configure the amount of days before mail is considered old -- with the default being 180 days.
- Messages that are flagged important are not archived or deleted unless you specify the --include-flagged option.
- Optionally warn about duplicate Message-IDs in a mailbox.
- You can specify an option so that unread mail is never archived.
- Allows you to store the compressed archive mailboxes in a directory of your choice, with an extension of your choice.
- Support for deleting old mail rather than archiving it.
- Optional ability to archive messages older than an absolute date with the --date option.
- Ability to only archive messages over a certain byte size.
Download (0.035MB)
Added: 2006-11-05 License: GPL (GNU General Public License) Price:
1084 downloads
Archive::SelfExtract 1.3
Archive::SelfExtract is a Perl module to bundle compressed archives with Perl code. more>>
Archive::SelfExtract is a Perl module to bundle compressed archives with Perl code.
SYNOPSIS
use Archive::SelfExtract;
# writes output script to STDOUT
Archive::SelfExtract::createExtractor( "perlcode.pl", "somefiles.zip" );
# with various options:
Archive::SelfExtract::createExtractor( "perlcode.pl", "somefiles.zip",
perlbin => "/opt/perl58/bin/perl",
output_fh => $someFileHandle,
);
See also the command line tool, mkselfextract.
Archive::SelfExtract allows you create Perl programs out of compressed zip archives. Given a piece of code and an archive, it creates a single file which, when run, unpacks the archive and then runs the code.
This module provides a function for creating a self-extractor script, a function to unpack the archive, and utility functions for wrapped programs
<<lessSYNOPSIS
use Archive::SelfExtract;
# writes output script to STDOUT
Archive::SelfExtract::createExtractor( "perlcode.pl", "somefiles.zip" );
# with various options:
Archive::SelfExtract::createExtractor( "perlcode.pl", "somefiles.zip",
perlbin => "/opt/perl58/bin/perl",
output_fh => $someFileHandle,
);
See also the command line tool, mkselfextract.
Archive::SelfExtract allows you create Perl programs out of compressed zip archives. Given a piece of code and an archive, it creates a single file which, when run, unpacks the archive and then runs the code.
This module provides a function for creating a self-extractor script, a function to unpack the archive, and utility functions for wrapped programs
Download (0.006MB)
Added: 2007-06-21 License: Perl Artistic License Price:
859 downloads
Archive::Any::Create 0.02
Archive::Any::Create is an abstract API to create archives (tar.gz and zip). more>>
Archive::Any::Create is an abstract API to create archives (tar.gz and zip).
SYNOPSIS
use Archive::Any::Create;
my $archive = Archive::Any::Create->new;
$archive->container(foo); # top-level directory
$archive->add_file(bar.txt, $data); # foo/bar.txt
$archive->add_file(bar/baz.txt, $data); # foo/bar/baz.txt
$archive->write_file(foo.tar.gz);
$archive->write_file(foo.zip);
$archive->write_filehandle(*STDOUT, tar.gz);
Archive::Any::Create is a wrapper module to create tar/tar.gz/zip files with a single easy-to-use API.
<<lessSYNOPSIS
use Archive::Any::Create;
my $archive = Archive::Any::Create->new;
$archive->container(foo); # top-level directory
$archive->add_file(bar.txt, $data); # foo/bar.txt
$archive->add_file(bar/baz.txt, $data); # foo/bar/baz.txt
$archive->write_file(foo.tar.gz);
$archive->write_file(foo.zip);
$archive->write_filehandle(*STDOUT, tar.gz);
Archive::Any::Create is a wrapper module to create tar/tar.gz/zip files with a single easy-to-use API.
Download (0.003MB)
Added: 2006-06-28 License: Perl Artistic License Price:
1214 downloads
Apache Ant 1.7.0
Apache Ant is a Java based build tool, similar to make, but with better support for the cross platform issues. more>>
Apache Ant is a Java based build tool, similar to make, but with better support for the cross platform issues involved with developing Java applications.
Apache Ant is the build tool of choice for all Java projects at Apache and many other Open Source Java projects.
Enhancements:
- A resource framework was introduced.
- Some of the core ant tasks such as copy are now able to process not only file system resources but also zip entries, tar entries, and paths.
- Resource collections group resources, and can be further combined with operators such as union and intersection.
- This version starts outsourcing of optional tasks to Antlibs.
- The .NET antlib replaces the .NET optional tasks.
- Support for the version control system Subversion is also provided as an antlib.
- A large number of bugs were fixed.
- Some initial support for Java6 features was added.
<<lessApache Ant is the build tool of choice for all Java projects at Apache and many other Open Source Java projects.
Enhancements:
- A resource framework was introduced.
- Some of the core ant tasks such as copy are now able to process not only file system resources but also zip entries, tar entries, and paths.
- Resource collections group resources, and can be further combined with operators such as union and intersection.
- This version starts outsourcing of optional tasks to Antlibs.
- The .NET antlib replaces the .NET optional tasks.
- Support for the version control system Subversion is also provided as an antlib.
- A large number of bugs were fixed.
- Some initial support for Java6 features was added.
Download (8.5MB)
Added: 2006-12-20 License: The Apache License 2.0 Price:
719 downloads
cbviewer 0.7
cbviewer is a viewer for comic book archives in .zip, .rar, .cbz, and .cbr formats. more>>
cbviewer is a viewer for comic book archives in .zip, .rar, .cbz, and .cbr formats.
<<less Download (0.51MB)
Added: 2006-11-23 License: GPL (GNU General Public License) Price:
1101 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above rar archiver 7 zip search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
