puppy linux wireless
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 5408
Puppy Linux 4.2.1
Puppy Linux provides you with a perfect and very useful evolutionary operating system which is based on GNU Linux. more>>
Puppy Linux 4.2.1 provides you with a perfect and very useful evolutionary operating system which is based on GNU Linux. Whats different here is that Puppy is extraordinarily small, yet quite full featured. Puppy Linux can boot into a 64MB ramdisk, and that's it, the whole caboodle runs in RAM. Unlike live CD distributions that have to keep pulling stuff off the CD, Puppy in its entirety loads into RAM. This means that all applications start in the blink of an eye and respond to user input instantly.
Major Features:
- Puppy Linux has the ability to boot off a flash card or any USB memory device (flash-Puppy), CDROM (live-Puppy), Zip disk or LS/120/240 Superdisk (zippy-Puppy), floppy disks (floppy-Puppy), internal hard drive (hard-Puppy).
- Puppy occupies about 50-60M on my USB Flash drive, CDROM, or whatever is the storage media.
- When Puppy boots, everything uncompressed into a RAM area that we call a "ramdisk". The live-CD will bootup on systems with only 32M RAM, but the more RAM you have the more Puppy is able to keep files permanently in ramdisk hence more speed. A PC with 128M RAM is the recommended minimum.
- Note that Puppy will automatically use a swap partition if it exists. When booting from a USB Flash device, Puppy tries to load all the Flash files into physical RAM, but if there is not enough RAM then Puppy is able to copy the excess to a swap partition if it exists. This eliminates writes to the Flash memory during a session, greatly extending its life span.
- You may need to have a swap partition to run Firefox or Mozilla on PCs with less than 64M RAM. Certainly, for a PC with only 32M RAM, a swap partition is necessary to run most of the large GUI applications.
Enhancements:
- CUPS-1.3.10 regressed from 1.4b2 to resolve ongoing issues with CUPS printing.
- Fixed printing from Geany, Leafpad and Gnumeric using CUPS-1.3.10
- Abiword-2.6.3 with 2.6.6 plugins has been patched for improved .doc & .docx support (Liberation ttf fonts required for some documents)
- Pwidgets updated to 2.0.8
- Pcrypt updated to 17 May 2009 release and now requires Ccrypt to function. Bcrypt has been dropped in consequence.
- Ccrypt-1.7 added as dependency for Pcrypt
- MIME-types updated in Rox-2.6.1
- Patches for gtk+ Xinput and b43 broadcom network driver
- Pmusic updated to 0.6.4
- Pschedule updated to 0.7
- Plus previously issued patches for nbtscan, mountcifs, jwm-tray, xsane, network wizard (now at April 4 release), mtpaint-snapshot, gtk+2.12.1-Xinput-fix and pcp (Puppy control panel).
Added: 2009-05-22 License: GPL Price: FREE
1 downloads
Other version of Puppy Linux
Puppy Linux is an evolutionary operating system, based on GNU Linux. Puppy Linux 2.17.1 - Barry ... Puppy Linux is an evolutionary operating system, based on GNU Linux. Whats different here isLicense:GPL (GNU General Public License)
Linux Wireless LAN Project 0.2.3
The goal of the Linux WLAN project is to develop a complete, standards based, wireless LAN system. more>>
The goal of the Linux WLAN project is to develop a complete, standards based, wireless LAN system using the GNU/Linux operating system.
The linux-wlan package is a linux device driver and subsystem package that is intended to provide the full range of IEEE 802.11 MAC management capabilities for use in user-mode utilities and scripts. The package currently supports the Intersil 802.11b Prism2, Prism2.5, and Prism3 reference designs for PCMCIA, PCI, and USB.
The package includes support for PLX9052 based PCI to PCMCIA adapter
with a few different PCMCIA cards.
<<lessThe linux-wlan package is a linux device driver and subsystem package that is intended to provide the full range of IEEE 802.11 MAC management capabilities for use in user-mode utilities and scripts. The package currently supports the Intersil 802.11b Prism2, Prism2.5, and Prism3 reference designs for PCMCIA, PCI, and USB.
The package includes support for PLX9052 based PCI to PCMCIA adapter
with a few different PCMCIA cards.
Download (0.53MB)
Added: 2006-06-27 License: GPL (GNU General Public License) Price:
1256 downloads
Powered by Linux
Powered by Linux is a KDM theme created after a wallpaper of the same name. more>>
Powered by Linux is a KDM theme created after a wallpaper of the same name. It was tested on KDE 3.5.6.
<<less Download (0.70MB)
Added: 2007-03-16 License: GPL (GNU General Public License) Price:
953 downloads
PerSeO Linux 0.1
PerSeO Linux is a operating system of the CeSeNA group. more>>
PerSeO is the official, Knoppix-based Linux distribution of the CeSeNA group. The version currently under development is v0.1 beta Live Professional, which will be accessible from both the command line and a remote administration interface.
Main features:
- KDE 3.2: the famous user-friendly graphical interface
- Network Tools: several network-related applications (e.g. nmap, ethereal, wireless tools etc.)
- Messenger software: could be useful
- Commonly used servers: Samba, Apache, DHCP, etc.
- IENA: an innovative, security-oriented software (a PerSeO exclusive) created by Marco Ramilli
- RoboAdmin: an original tool for securing remote administration based on IRC protocol (a PerSeO exclusive) created by Marco Ramilli
- SpamAssassin: the best anti-spam tool
- ClamAV: a powerful and open-source antivirus software
<<lessMain features:
- KDE 3.2: the famous user-friendly graphical interface
- Network Tools: several network-related applications (e.g. nmap, ethereal, wireless tools etc.)
- Messenger software: could be useful
- Commonly used servers: Samba, Apache, DHCP, etc.
- IENA: an innovative, security-oriented software (a PerSeO exclusive) created by Marco Ramilli
- RoboAdmin: an original tool for securing remote administration based on IRC protocol (a PerSeO exclusive) created by Marco Ramilli
- SpamAssassin: the best anti-spam tool
- ClamAV: a powerful and open-source antivirus software
Download (630MB)
Added: 2006-01-30 License: GPL (GNU General Public License) Price:
1362 downloads
Voyage Linux 0.1
Voyage Linux is a Debian sarge-based distro (voyage) built from scratch. more>>
Voyage Linux is a Debian sarge-based distro (voyage) built from scratch. It is best run on a x86-based embedded platform such as Soekris 45xx/48xx and WRAP boards.
Main features:
- based on Debian Sarge r3.1
- 2.6.8.1 kernel
- prism54, hostap, madwifi, ipw2100, rt2400 drivers
- hostapd, wpa_supplicant from sarge
ToDo:
- improving installation scripts to allow different flavour for building customized distro
- scripts for setting up network configuration
- more wireless drivers (ipw2200, rt2500, etc.)
- further reducing in size
- light-weighted web server (thttpd + php) for system configuration
- bootable CD with voyage installer, pxeboot support
- more software features, like zebra/quagga, OpenVPN, FreeSWAN, traffic shaping/QoS, Asterisk/VoIP, etc.
<<lessMain features:
- based on Debian Sarge r3.1
- 2.6.8.1 kernel
- prism54, hostap, madwifi, ipw2100, rt2400 drivers
- hostapd, wpa_supplicant from sarge
ToDo:
- improving installation scripts to allow different flavour for building customized distro
- scripts for setting up network configuration
- more wireless drivers (ipw2200, rt2500, etc.)
- further reducing in size
- light-weighted web server (thttpd + php) for system configuration
- bootable CD with voyage installer, pxeboot support
- more software features, like zebra/quagga, OpenVPN, FreeSWAN, traffic shaping/QoS, Asterisk/VoIP, etc.
Download (52.5MB)
Added: 2005-10-17 License: GPL (GNU General Public License) Price:
1472 downloads
Xpress Linux 1.0
Xpress Linux is a Kubuntu-based distribution developed with a goal of making Linux more accessible to Windows users. more>>
Xpress Linux is a Kubuntu-based distribution developed with a goal of making Linux more accessible to Windows users.
The new theme looks very nice its very brushed and modern looking, its just small things that really impress me, like how when I scroll over to the close button it fades silently into red.
The programs it comes with are very standard but nice nonetheless I really appreciate the Wireless Assistant LAN manager, it works flawlessly. Also I had direct access to all my files on a Windows PC easy through Konqueror, unfortunately we are not finished with the wine setup so the programs didnt work off the bat but you had to install them (Note: this should be fixed in the final version).
There is still no installer, but that will be there soon. So everything is on schedule and expect the November 30th release date (maybe even earlier!)
<<lessThe new theme looks very nice its very brushed and modern looking, its just small things that really impress me, like how when I scroll over to the close button it fades silently into red.
The programs it comes with are very standard but nice nonetheless I really appreciate the Wireless Assistant LAN manager, it works flawlessly. Also I had direct access to all my files on a Windows PC easy through Konqueror, unfortunately we are not finished with the wine setup so the programs didnt work off the bat but you had to install them (Note: this should be fixed in the final version).
There is still no installer, but that will be there soon. So everything is on schedule and expect the November 30th release date (maybe even earlier!)
Download (695.8MB)
Added: 2007-01-06 License: GPL (GNU General Public License) Price:
642 downloads
Pyramid Linux PXE Live CD 12-18-06
Pyramid is binary linux distro for use on embedded platforms. more>>
Pyramid Linux Projects mission is to build and maintain a high quality, rock solid, entirely open source operating system for wireless networking applications.
Pyramid is binary linux distro for use on embedded platforms. It is primarily focused on wireless applications however people have found many great uses for it. We primarily develop and test Pyramid for Metrix Boxes, but it works well on other x86 based hardware as well. Check the WorkingHardware page for more info or add to it if you find hardware not listed that works with Pyramid.
Pyramid is currently maintained by a few people at Metrix Communication. We are open to bringing more people on board the Pyramid team to move the OS further. We always accept patches and contributions for review. We ship Pyramid on our wireless products, which was the main motivation behind its creation. However we believe in making Pyramid as flexible as possible so it will work on as many x86 embedded platforms as possible. We build Pyramid for ourselves and the community regardless of whose hardware they choose to run it on.
<<lessPyramid is binary linux distro for use on embedded platforms. It is primarily focused on wireless applications however people have found many great uses for it. We primarily develop and test Pyramid for Metrix Boxes, but it works well on other x86 based hardware as well. Check the WorkingHardware page for more info or add to it if you find hardware not listed that works with Pyramid.
Pyramid is currently maintained by a few people at Metrix Communication. We are open to bringing more people on board the Pyramid team to move the OS further. We always accept patches and contributions for review. We ship Pyramid on our wireless products, which was the main motivation behind its creation. However we believe in making Pyramid as flexible as possible so it will work on as many x86 embedded platforms as possible. We build Pyramid for ourselves and the community regardless of whose hardware they choose to run it on.
Download (696.8MB)
Added: 2006-12-26 License: GPL (GNU General Public License) Price:
1052 downloads
Wireless Tools 27
The Wireless Tools is a set of tools allowing to manipulate the Linux Wireless Extensions. more>>
The Linux Wireless Extension and the Wireless Tools are an Open Source project sponsored by Hewlett Packard (through my contribution) since 1996, and build with the contribution of many Linux users all over the world.
The Wireless Extension (WE) is a generic API allowing a driver to expose to the user space configuration and statistics specific to common Wireless LANs. The beauty of it is that a single set of tool can support all the variations of Wireless LANs, regardless of their type (as long as the driver support Wireless Extension).
Another advantage is these parameters may be changed on the fly without restarting the driver (or Linux).
The Wireless Tools (WT) is a set of tools allowing to manipulate the Wireless Extensions. They use a textual interface and are rather crude, but aim to support the full Wireless Extension. There are many other tools you can use with Wireless Extensions, however Wireless Tools is the reference implementation.
iwconfig manipulate the basic wireless parameters
iwlist allow to initiate scanning and list frequencies, bit-rates, encryption keys...
iwspy allow to get per node link quality
iwpriv allow to manipulate the Wireless Extensions specific to a driver (private)
ifrename allow to name interfaces based on various static criteria
Most Linux distributions also have integrated Wireless Extensions support in their networking initialisation scripts, for easier boot-time configuration of wireless interfaces. They also include Wireless Tools as part of their standard packages.
Wireless configuration can also be done using the Hotplug scripts and distribution specific support, this enable the proper support of any removable wireless interface (Pcmcia, CardBus, USB...).
Any versions of the Pcmcia package offer the possibility to do wireless configuration of Pcmcia and Cardbus card through thefile wireless.opts. This allow to fully integrate wireless settings in the Pcmcia scheme mechansism. However, this method is now deprecated in favor of distribution specific methods.
Please note that the Wireless Tools (starting with version 19) supports fully IEEE 802.11 parameters and devices, support older style of devices and most proprietary protocols, and are prepared to handle HiperLan as well. More recent versions of course adds more 802.11 support.
But, unfortunately not all drivers support all these features...
<<lessThe Wireless Extension (WE) is a generic API allowing a driver to expose to the user space configuration and statistics specific to common Wireless LANs. The beauty of it is that a single set of tool can support all the variations of Wireless LANs, regardless of their type (as long as the driver support Wireless Extension).
Another advantage is these parameters may be changed on the fly without restarting the driver (or Linux).
The Wireless Tools (WT) is a set of tools allowing to manipulate the Wireless Extensions. They use a textual interface and are rather crude, but aim to support the full Wireless Extension. There are many other tools you can use with Wireless Extensions, however Wireless Tools is the reference implementation.
iwconfig manipulate the basic wireless parameters
iwlist allow to initiate scanning and list frequencies, bit-rates, encryption keys...
iwspy allow to get per node link quality
iwpriv allow to manipulate the Wireless Extensions specific to a driver (private)
ifrename allow to name interfaces based on various static criteria
Most Linux distributions also have integrated Wireless Extensions support in their networking initialisation scripts, for easier boot-time configuration of wireless interfaces. They also include Wireless Tools as part of their standard packages.
Wireless configuration can also be done using the Hotplug scripts and distribution specific support, this enable the proper support of any removable wireless interface (Pcmcia, CardBus, USB...).
Any versions of the Pcmcia package offer the possibility to do wireless configuration of Pcmcia and Cardbus card through thefile wireless.opts. This allow to fully integrate wireless settings in the Pcmcia scheme mechansism. However, this method is now deprecated in favor of distribution specific methods.
Please note that the Wireless Tools (starting with version 19) supports fully IEEE 802.11 parameters and devices, support older style of devices and most proprietary protocols, and are prepared to handle HiperLan as well. More recent versions of course adds more 802.11 support.
But, unfortunately not all drivers support all these features...
Download (0.18MB)
Added: 2005-10-18 License: GPL (GNU General Public License) Price:
1540 downloads
Gnome Wireless PC Lock 0.2
Gnome Wireless PC Lock is a Gnome applet that locks your desktop when you walk away from your desk. more>>
Gnome Wireless PC Lock is a Gnome applet that locks your desktop when you walk away from your desk.
A small gnome program that locks your desktop when you walk away from your desk. It is tested with a Sitecom cn-129 Wireless PC Lock.
<<lessA small gnome program that locks your desktop when you walk away from your desk. It is tested with a Sitecom cn-129 Wireless PC Lock.
Download (0.011MB)
Added: 2006-10-10 License: GPL (GNU General Public License) Price:
1120 downloads
MURIX Linux 2.6.19
MURIX Linux is a distribution based on LinuxFromScratch for building bootable CD-ROMs. more>>
MURIX Linux is a distribution based on LinuxFromScratch for building bootable CD-ROMs.
Since you build it from source, MURIX should function on almost any hardware.
<<lessSince you build it from source, MURIX should function on almost any hardware.
Download (26.6MB)
Added: 2007-01-01 License: GPL (GNU General Public License) Price:
1027 downloads
ProMEPIS Linux 2005.b04
ProMEPIS Linux is a Linux OS based on Debian that can be run from your CD drive without installation. more>>
ProMEPIS Linux is a linux distribution based on Debian that can be run from your CD drive without installation.
Where it shines is its easy, 100% "point and click" installation, and automatic detection of not only "normal" computer hardware but also popular webcams, the latest wireless network cards, "Winmodems" that usually work only with Windows, digital cameras, scanners, and other devices.
The difference between SimplyMEPIS and ProMEPIS is that SimplyMEPIS will continue to be a freely available desktop MEPIS bootable CD and ProMEPIS will designate an upcoming multi-CD packaged version of MEPIS.
<<lessWhere it shines is its easy, 100% "point and click" installation, and automatic detection of not only "normal" computer hardware but also popular webcams, the latest wireless network cards, "Winmodems" that usually work only with Windows, digital cameras, scanners, and other devices.
The difference between SimplyMEPIS and ProMEPIS is that SimplyMEPIS will continue to be a freely available desktop MEPIS bootable CD and ProMEPIS will designate an upcoming multi-CD packaged version of MEPIS.
Download (696.8MB)
Added: 2006-03-01 License: Freeware Price:
756 downloads
Wireless Applet 1.0
Wireless Applet is a gnome-panel applet that shows up the status of your wireless card. more>>
Wireless Applet is a gnome-panel applet that shows up the status of your wireless card.
This applet used to be in the default Gnome releases before it was replaced around v2.10 or so. Some users prefer it over the new one, so we decided to post it here for easy access to it.
<<lessThis applet used to be in the default Gnome releases before it was replaced around v2.10 or so. Some users prefer it over the new one, so we decided to post it here for easy access to it.
Download (0.090MB)
Added: 2006-07-10 License: GPL (GNU General Public License) Price:
1210 downloads
Phrealon Linux 0.96
Phrealon Linux is a bootable Linux CD for imaging workstations. more>>
Phrealon is a bootable linux CD based on Slackware Linux 8.0 (now 9.0)designed to allow the easy imaging of multiple workstations.
It utilizes the udpcast set of Linux tools to accomplish this.
<<lessIt utilizes the udpcast set of Linux tools to accomplish this.
Download (34.4MB)
Added: 2005-04-04 License: GPL (GNU General Public License) Price:
1665 downloads
Apples Icons for Linux -
9 freeware icons of Apples products. more>> This is one of the Dirceu Veiga's products. This contains 9 freeware icons of Apples products.
Its content includes variations of Cinema Display, eMac and iMac<<less
Download (195KB)
Added: 2009-04-11 License: Freeware Price: Free
198 downloads
wireless-applet 0.0.2
wireless-applet is an applet for the GNOME Panel displaying available wireless networks. more>>
wireless-applet is an GNOME Panel applet displaying available wireless networks with the ability to add a listed network to the system configuration easily.
Brings the comfort of NetworkManager to wpa_supplicant users. Supports WEP, WPA-PSK, and open wireless networks.
<<lessBrings the comfort of NetworkManager to wpa_supplicant users. Supports WEP, WPA-PSK, and open wireless networks.
Download (0.072MB)
Added: 2006-01-19 License: GPL (GNU General Public License) Price:
1394 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above puppy linux wireless search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
