Free puppy linux usb software for linux

Berry Linux is a bootable CD Linux with automatic hardware detection and support for many graphics cards, sound cards, SCSI and USB devices and other peripherals.
Berry Linux can be used as a Linux demo, educational CD or as a rescue system. It is not necessary to install anything on a hard disk, although this option is also available (it needs 1.2GB of hard disk space). Berry Linux is based on Red Hat Linux and Knoppix.
Main features:
- Support for Kernel-2.6. ALSA, ACPI, selinux.
- Overlay Filesystem Support.
- Berry Linux is not necessary to install. (Root partition is in the ramdisc using initrd, all commands are operated by being transfered from CD-ROM)
- Install without parting patitions on Windows to use install.bat. (Using cloop/loopback device)
- Its possible to install Berry Linux on hard disk. (Use Berry Linux Installer or Copy under /BERRY/, and set up LILO)
- Berry Linux can boot from USB-HDD/memory.
- Berry Linux uses WHIZ, a very sharp Kana-Kanji conversion system. (WHIZ Project)
- Automatically recognizes USB storage, and show icons.
- Berry Linux uses free Japanese True Type Fonts.
- Berry Linux uses bootsplash when booting.
- Berry Linux uses DHCP to connect the Network. (If youd like to use PPPoE, you should setting up it on the Terminal)
- Its possible to save personal setting.
- Red Hat Fedora compatible.
- Using new technologies.
- You can listen to mp3 using XMMS, and play DVD/DivX using MPlayer and XINE.
- You can edit files of Microsoft Word, Excel by OpenOffice.
Berry Linux Minis Features:
- Minimum Linux enviroment is available by using Berry Linux Mini.
- Its file size is very small. (148.0MB)
- Its light. Because of the Window Manager is Fluxbox.
- You can enjoy comfortable Linux enviroment.

MURIX Linux is a distribution based on LinuxFromScratch for building bootable CD-ROMs.

Since you build it from source, MURIX should function on almost any hardware.

Phrealon is a bootable linux CD based on Slackware Linux 8.0 (now 9.0)designed to allow the easy imaging of multiple workstations.

It utilizes the udpcast set of Linux tools to accomplish this.

BG-Rescue Linux is a Busybox and uClibc-based rescue system with kernel 2.4.26 which supports the NTFS 2.1.6b driver. It is loaded either from two floppy disks or from one 2.8MB El Torito CD. The system runs entirely in RAM.
BG-Rescue Linux supports a wide range of hardware and filesystems, and can serve as a full backup/restore system for MS Windows systems that use FAT12, FAT16, or FAT32. It also includes bzip2, cabextract, cmdftp, cramfs, dosfstools, e2fsprogs, gpart, lilo, loadlin, lphdisk, mdadm, ms-sys, ntfsprogs, pcmcia-cardmgr, progsreiserfs, reiserfsck, smbclient, syslinux, umsdos-utils, and zip. There is support for automatically loading the F-Prot antivirus program from CD-ROM.
Supported Hardware:
Block Devices:
- IDE/ATAPI Disk/CD-Rom/Floppy/Tape Support
- Normal Floppy Disk Support
- Compaq SMART2 / Smart Array 5xxx
- Mylex DAC960/DAC1100 PCI Raid Controller
- Software RAID-0/1/4/5/Linear and LVM Support
- Loopback device
- Compressed Loop Image (cloop)
- USB Mass Storage support (with PocketBoy patch)
Network Devices:
- 3c509/3c529 (MCA)/3c579 "Etherlink III"
- 3c590/3c900 series (592/595/597) "Vortex/Boomerang"
- AMD LANCE and PCnet (AT1500, NE2100)
- AMD PCnet32 PCI Ethernet
- DECchip Tulip (dc21x4x) PCI
- EtherExpressPro/100 (eepro100, original Becker driver)
- Myson MTD 8xx PCI Ethernet
- NE2000 / NE1000 ISA-Cards (e.g. RealTek RTL-8019)
- NE2000 PCI and clones (e.g. RealTek RTL-8029)
- nForce Ethernet
- PLIP - Parallel Link cable
- RealTek RTL-8139 C+ PCI Fast Ethernet
- RealTek RTL-8139 PCI Fast Ethernet with old 8129/8130 and uncommon RTL-8139 rev. K
- SIS 900/7016 PCI Fast Ethernet
- TI ThunderLAN
- VIA Rhine
- Winbond W89c840 Ethernet
- TCP/IP-Networking
- USB Network Devices:
- ASIX AX88172 based ethernet device
- CATC NetMate based ethernet
- Communication Class Ethernet device
- KLSI KL5USB101 based ethernet
- Pegasus/Pegasus-II based ethernet
- Realtek RTL8150 based ethernet device
- USB-to-USB Networking Cables, Linux PDAs
- PCMCIA Network Devices:
- PCMCIA NE2000-Clones
- PCMCIA serial device
- Xircom 16-bit PCMCIA support
USB-Support:
- Host Controller Drivers: EHCI HCD (USB 2.0), OHCI, UHCI
- Preliminary USB Device Filesystem
- HIDBP Keyboard (basic)
- USB Mass Storage support (with PocketBoy patch)
- USB Network Devices (see above)
Console:
- VGA Text console
- VESA VGA graphics console 8bit
BUS / Ports:
- PCI / ISA Bus
- PCMCIA / Cardbus (network devices: see above)
- Serial port (standard / generic)
- Parallel Port
- Parallel Printer
- Keyboard support (generic / USB)
- Advanced Power Management BIOS Support
- Plug and Play Support / ISAPNP Support

USB Pen Drive Linux is portable Linux compilation that is based purely on Debian Linux. The project can be installed to a portable hard drive, USB flash pen drive or even an ipod or other portable device.

USB Linux installation enables you to install a portable Linux operating system on a flash drive no larger than your thumb. This portable Linux version can then be run from any computer that can boot from a flash device.

This process allows you to bring your operating system, desktop, applications, files, e-mail, personal settings, favorites and more with you. It’s like having your own personal operating system you can carry in your pocket. On this site, we provide many simplified portable Linux flash drive tutorials.