puppy linux 2.17.1
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 5226
Puppy Linux 2.17.1
Puppy Linux is an evolutionary operating system, based on GNU Linux. more>>
Puppy Linux is an evolutionary operating system, based on GNU Linux. Whats different here is that Puppy is extraordinarily small, yet quite full featured. Puppy Linux can boot into a 64MB ramdisk, and thats it, the whole caboodle runs in RAM.
Unlike live CD distributions that have to keep pulling stuff off the CD, Puppy in its entirety loads into RAM. This means that all applications start in the blink of an eye and respond to user input instantly.
Puppy Linux has the ability to boot off a flash card or any USB memory device (flash-Puppy), CDROM (live-Puppy), Zip disk or LS/120/240 Superdisk (zippy-Puppy), floppy disks (floppy-Puppy), internal hard drive (hard-Puppy).
Puppy occupies about 50-60M on my USB Flash drive, CDROM, or whatever is the storage media.
When Puppy boots, everything uncompresses into a RAM area that we call a "ramdisk". The live-CD will bootup on systems with only 32M RAM, but the more RAM you have the more Puppy is able to keep files permanently in ramdisk hence more speed. A PC with 128M RAM is the recommended minimum.
Note that Puppy will automatically use a swap partition if it exists. When booting from a USB Flash device, Puppy tries to load all the Flash files into physical RAM, but if there is not enough RAM then Puppy is able to copy the excess to a swap partition if it exists. This eliminates writes to the Flash memory during a session, greatly extending its life span.
You may need to have a swap partition to run Firefox or Mozilla on PCs with less than 64M RAM. Certainly, for a PC with only 32M RAM, a swap partition is necessary to run most of the large GUI applications.
<<lessUnlike live CD distributions that have to keep pulling stuff off the CD, Puppy in its entirety loads into RAM. This means that all applications start in the blink of an eye and respond to user input instantly.
Puppy Linux has the ability to boot off a flash card or any USB memory device (flash-Puppy), CDROM (live-Puppy), Zip disk or LS/120/240 Superdisk (zippy-Puppy), floppy disks (floppy-Puppy), internal hard drive (hard-Puppy).
Puppy occupies about 50-60M on my USB Flash drive, CDROM, or whatever is the storage media.
When Puppy boots, everything uncompresses into a RAM area that we call a "ramdisk". The live-CD will bootup on systems with only 32M RAM, but the more RAM you have the more Puppy is able to keep files permanently in ramdisk hence more speed. A PC with 128M RAM is the recommended minimum.
Note that Puppy will automatically use a swap partition if it exists. When booting from a USB Flash device, Puppy tries to load all the Flash files into physical RAM, but if there is not enough RAM then Puppy is able to copy the excess to a swap partition if it exists. This eliminates writes to the Flash memory during a session, greatly extending its life span.
You may need to have a swap partition to run Firefox or Mozilla on PCs with less than 64M RAM. Certainly, for a PC with only 32M RAM, a swap partition is necessary to run most of the large GUI applications.
Download (93.2MB)
Added: 2007-08-05 License: GPL (GNU General Public License) Price:
525 downloads
Other version of Puppy Linux
Puppy Linux provides you with a perfect and very useful evolutionary operating system which is ... Puppy Linux can boot into a 64MB ramdisk, and that's it, the whole caboodle runs in RAM. UnlikePrice: FREE
License:GPL
License:GPL
MURIX Linux 2.6.19
MURIX Linux is a distribution based on LinuxFromScratch for building bootable CD-ROMs. more>>
MURIX Linux is a distribution based on LinuxFromScratch for building bootable CD-ROMs.
Since you build it from source, MURIX should function on almost any hardware.
<<lessSince you build it from source, MURIX should function on almost any hardware.
Download (26.6MB)
Added: 2007-01-01 License: GPL (GNU General Public License) Price:
1027 downloads
PLD Linux 2.0
PLD Linux is a Polish Linux distribution. more>>
PLD Linux is operating system, which can be applied on Your computer. Huge amount of packages available, makes that everyone should find something useful.
The distribution is being developed in Poland by Poles however, we would like users from all around the world to use it.
The PLD Linux Team has released the first official stable version on November, 22, 2002.
<<lessThe distribution is being developed in Poland by Poles however, we would like users from all around the world to use it.
The PLD Linux Team has released the first official stable version on November, 22, 2002.
Download (693MB)
Added: 2007-04-27 License: GPL (GNU General Public License) Price:
913 downloads
Icepack Linux 2.75
Icepack linux is an independent Linux distribution built from scratch. more>>
Icepack linux is an independent Linux distribution built from scratch. Our objective is to offer you a user-friendly full-featured operating system, pre-configured, well structured and easy to work with, and filled with the latest stable versions of great Linux applications.
You dont need a profound Linux knowledge to install and use Icepack - our install manager guides you safely through the installation process, and the desktops and menus are self-explanatory!
<<lessYou dont need a profound Linux knowledge to install and use Icepack - our install manager guides you safely through the installation process, and the desktops and menus are self-explanatory!
Download (574MB)
Added: 2005-04-06 License: GPL (GNU General Public License) Price:
1668 downloads
ULTILEX 2.1.0
ULTILEX brings users a versatile Live CD Linux distribution which contains other Live Linux distributions, such as Slax, Finnix, Puppy or DSL more>>
ULTILEX 2.1.0 brings users a versatile Live CD Linux distribution which contains other Live Linux distributions, such as Slax, Finnix, Puppy or DSL. You can boot ULTILEX from CD/DVD, as well as from USB device.
<<lessWhen you boot, the first thing you see is a beautiful startup screen where you can choose which Live Linux distribution to run. The current version of ULTILEX is 2.1.0 and it "wraps" the following Live Linux distributions:
- Slax 6.0.9
- Finnix 92.1
- System Rescue CD 1.1.6
- Puppy Linux 4.1.2
- Damn Small Linux 4.1.10
To install on USB flash device, follow these steps (applied from Slax):
- Copy all files and folders from the CD to the root folder of your USB flash device.
- Execute "/boot/bootinst.sh" (for Linux), or " oot ootinst.bat" (for Windows).
- Thats all. You are ready to boot ULTILEX from your USB flash device!
- One very interesting feature of ULTILEX is that you can easily install it on USB flash device and save the changes youve made during the live session on it.
- You can modify files and even install/remove modules and all your changes are saved on the USB flash.
Enhancements:
- "System Rescue CD" is updated to version 1.1.6
- Some minor bugs are fixed.
Added: 2009-04-01 License: GPL Price: FREE
1 downloads
QEMU-Puppy 2.15-1
QEMU-Puppy is an OS and a set of applications on a USB memory stick. more>>
QEMU-Puppy is an OS and a set of applications on a USB memory stick. QEMU-Puppy can be booted natively, or on top of an other, already installed, OS. Just borrow a PC, boot your own environment and return the PC unaffected.
Once upon a time, I realized that having your data on a USB memory stick wasnt exactly what I wanted. I wanted more. Carrying your files is nice. Carrying your applications as well would be even better. What the heck, carrying your OS and even your own machine on your memory stick would be the best!
If you have your files on your memory stick, you can take any machine and access those files. Being able to handle the files, depends on the installed software. If you dont want to depend on the installed software, you can put your own software on the memory stick as well. But most of the software needs to be installed, which is not easy, or possible, or desirable, or allowed on a lot of machines. You dont want to pollute a machine you borrowed... Having a complete OS at hand, including applications and files would take away these constraints. Just put everything on a USB memory stick and boot from it.
A bootable USB memory stick has some disadvantages as well. First of all, not every PC is able to boot from USB. Second, if the machine does boot from USB, not all hardware is detected or configured properly, since the hardware "changes" every day. Third, booting from USB "locks" the machine: Its either the natively installed OS or your OS, not both at the same time.
To get rid of these disadvantages, you can carry your own machine as well, not just your files, your applications and your OS. You can do this by buying a laptop. But its expensive, a physical burden and risky. The USB memory stick is cheap, light and easier to protect. A virtual machine , like QEMU, is cheap, light and easy to protect as well. With such a virtual machine, we are able to boot our OS on top of the natively installed OS. Now we have two OSs running concurrently on one machine!
ALT-TAB is enough to hide your machine and get back to work...
The tricky part is trying to have the OS on your USB memory stick to be able to boot natively, as well as in a virtual machine. But it can be done. And thats what this document is all about...
<<lessOnce upon a time, I realized that having your data on a USB memory stick wasnt exactly what I wanted. I wanted more. Carrying your files is nice. Carrying your applications as well would be even better. What the heck, carrying your OS and even your own machine on your memory stick would be the best!
If you have your files on your memory stick, you can take any machine and access those files. Being able to handle the files, depends on the installed software. If you dont want to depend on the installed software, you can put your own software on the memory stick as well. But most of the software needs to be installed, which is not easy, or possible, or desirable, or allowed on a lot of machines. You dont want to pollute a machine you borrowed... Having a complete OS at hand, including applications and files would take away these constraints. Just put everything on a USB memory stick and boot from it.
A bootable USB memory stick has some disadvantages as well. First of all, not every PC is able to boot from USB. Second, if the machine does boot from USB, not all hardware is detected or configured properly, since the hardware "changes" every day. Third, booting from USB "locks" the machine: Its either the natively installed OS or your OS, not both at the same time.
To get rid of these disadvantages, you can carry your own machine as well, not just your files, your applications and your OS. You can do this by buying a laptop. But its expensive, a physical burden and risky. The USB memory stick is cheap, light and easier to protect. A virtual machine , like QEMU, is cheap, light and easy to protect as well. With such a virtual machine, we are able to boot our OS on top of the natively installed OS. Now we have two OSs running concurrently on one machine!
ALT-TAB is enough to hide your machine and get back to work...
The tricky part is trying to have the OS on your USB memory stick to be able to boot natively, as well as in a virtual machine. But it can be done. And thats what this document is all about...
Download (93MB)
Added: 2007-04-14 License: GPL (GNU General Public License) Price:
570 downloads
Afick for Linux 2.11-1
Afick is a security tool, very close from the well known tripwire. more>> Afick is a security tool, very close from the well known tripwire. It allows to monitor the changes on your files systems, and so can detect intrusions.<<less
Download (602KB)
Added: 2009-04-09 License: Freeware Price: Free
197 downloads
Kwort Linux 2.2
Kwort Linux is an free operating system. more>>
Kwort Linux is an free operating system. Based on slackware, it provides a solid, simple and stable base system.
Kworts desktop and applications are completely based on the gtk2 toolkit. It uses the Xfce desktop as default with some modifications.
At the moment Kwort provides its own tools for retrieving packages from our mirrors called kpkg.
<<lessKworts desktop and applications are completely based on the gtk2 toolkit. It uses the Xfce desktop as default with some modifications.
At the moment Kwort provides its own tools for retrieving packages from our mirrors called kpkg.
Download (485.3MB)
Added: 2007-03-15 License: GPL (GNU General Public License) Price:
961 downloads
DesktopSecure for LInux 2.00.01
Panda DesktopSecure for Linux is the ideal solution for companies with Linux distributions installed on their workstations more>> Panda DesktopSecure for Linux is the ideal solution for companies with Linux distributions installed on their workstations. It is designed to respond to the specific protection demands of desktop and laptop computers running this operating system.<<less
Download (72.00MB)
Added: 2009-04-12 License: Others Price: NA
201 downloads
Tiny Box for Linux 2.2
Tiny Box is a free Direct Connect server for Linux. more>> Tiny Box is a free Direct Connect server completely written in lua code and based on the Lua AIO Distribution.<<less
Download (4.19MB)
Added: 2009-04-11 License: Freeware Price: Free
195 downloads
Hot Copy (hcp) for Linux 3.1.0
Snapshots of any Linux Block Device Hot Copy creates an instant point-in-time of any block device while the system is running without interrupting applications. Consistent Point-in-Time Snapshots Hot more>> <<less
Download (3074kb)
Added: 2009-04-10 License: Freeware Price:
197 downloads
iPod nano for Linux 1.0
Five icons inspired in the look of Apples iPod nano for use in desktops more>> Five icons inspired in the look of Apples iPod nano for use in desktops, websites and blogs.<<less
Download (128KB)
Added: 2009-04-28 License: Freeware Price:
185 downloads
Trinacria Linux 2.0
Trinacria Linux is a new Italian distribution based on KNOPPIX. more>>
Trinacria Linux is a new Italian distribution based on KNOPPIX.
Trinacria Linuxs primary target markets are the Italian office users and Linux beginners.
<<lessTrinacria Linuxs primary target markets are the Italian office users and Linux beginners.
Download (683.9MB)
Added: 2006-10-10 License: GPL (GNU General Public License) Price:
1114 downloads
HSweep For Linux 1.0.70
HSweep is a small program more>> Are you looking for a way to extract an e-mail address or a web address from documents like web pages and/or other text based documents? Yeah! Then this application is what you need.<<less
Download (106KB)
Added: 2009-04-28 License: Freeware Price: Free
181 downloads
Shadow For Linux 2.0.25
This application is a powerful data encoder/decoder more>> This application is a powerful data encoder/decoder that has the possibility to encode/decode everything and anything that fits on/in your Hard Disk Drive. You can encode texts, pictures, movies, music, applications ... so on.<<less
Download (115KB)
Added: 2009-04-24 License: Freeware Price: Free
184 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above puppy linux 2.17.1 search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
