Free pocket pc software software for linux

Dispatch Software is a software that saves time, money and increase your customer satisfaction. 100% free online, web-based dispatch software makes it easy to keep track of your vehicles.
Easily view what each vehicle will be doing each day. Export the daily schedule to a printable spreadsheet file for your driver to take on the road. View all units on one page for faster scheduling.
Dispatch drivers can view schedules ahead of time for better planning and time management.
Installation:
-copy all files to your web host
-use phpmyadmin or your mysql interface to run site.sql against your database.
-open site.xml and edit the database section with your database details.
-go to index.php and login with username of admin with a password of test.
-be sure to change the passwords for the admin and regular user.
Setup the site.xml file with your database settings as follows.
< database type="mysql" >
< server >database server address< /server >
< login >database login< /login >
< password >database password< /password >
< default >mysql database name< /default >
< /database >
Add this to your .htaccess file to prevent viewing of the xml config file.
< Files ~ ".xml" >
Order allow,deny
Deny from all
Satisfy All
< /Files >
Enhancements:
- A bug in the main library file for the dispatching system was fixed.

Pocket PC System Controller is a client-server package that will allow you to use your pocket pc as a remote controller for your desktop by sending voice commands.

Installation:

This is the server part of the software which you can install on a linux system.
See the INSTALL file in the ppc-system-controller-linux directory for more information.

Pocket Linux is an almost minimal, one floppy linux system designed to quickly convert PC workstation into secure linux-based workstation using ssh to connect to remote host (other networking clients are also supported).
It supports bootp for determining host IP and other network parameters (theres also manual configuration possible, but bootp is recommended).
In addition to workstations equipped with a network card (ethernet or arcnet), you can also use Pocket Linux on a PC equipped with a modem. Modem is automatically detected and then PPP connection is made.
The idea came up some time in 1996 or so. The distribution then was not perfect, but still it shown it was a great idea. It wasnt maintained for about year or so, until I took it up again in the early January 1998. After a complete rebuild Pocket Linux 2.00 was released. It soon gained a huge number of happy users, whose ideas helped its development.
The aim is to provide a small and efficient workstation that autoconfigures as much as possible and lets securely use the network from almost everywhere.
Current version is a nice attempt and future ones will enhance the automation and support for various network equipment and protocols, becoming a total solution. Future plans also include side projects like one floppy router.
In order to understand some of the config options its useful to know something about operations that are done during bootup (in order to automatically configure the network). These are, in order (the later attempts are made if the earlier ones dont set-up the network):
- attempt to setup the network using BOOTP
- attempt to reuse previous manual configuration
- modem detection
- attempt to setup modem conection
Most of the config options switches these operations on and off.
Main menu
You can choose the following network configuration commands from the main menu (only the ones that make sense in the present context are displayed):
- Options - allows setting few binary parameters controlling automatic network configuration and modem handling.
- BOOTP query - attempts to configure network (ethernet or arcnet) using BOOTP. Normally its automatically done during bootup, but this can be switched off.
- Manual configuration - allows manual setting of network configuration parameters (ethernet or arcnet).
- Detect modem - detects serial port the modem is on and its parameters (transfer rate, initialization commands).
- Dial PPP using predefined configuration - creates modem connection (PPP) using one of (up to ten) remembered configurations. By default only TPSA (0202122) configuration is remembered.
- Dial PPP using new configuration - creates new PPP configuration and sets up a modem connection using the newly created config.
- Disconnect PPP - disconnects modem connection.
- Mount /usr via NFS - mounts remote /usr filesystem via NFS. It will be automatically mounted during each Pocket Linux bootup if its turned on in configuration options.
- Exit - Do not config the network - exits the program without configuring the network.
Configuration options
There are following options available:
- Probe network with BOOTP - switches automatic BOOTP probing during bootup on and off. On by default.
- Reuse manual network configs - if on, an attempt is made to restore network configuration during bootup. Netconf remembers 10 most recent manual configurations along with network cards MAC addresses. If cards MAC address matches one of the remembered ones, assigned configuration is used. On by default.
- Automatically setup PPP - switches automatic attempt to create modem connection during bootup on and off. Its made with the first config on PPP configs list. On by default.
- Reuse modem configuration - if on, modem detection is not performed during bootup - instead most recently used modem configuration is used. Off by default.
- Pulse dialing - switches dialing mode used for modem connections between tone dialing (DTMF) and pulse dialing. Default is off (that is tone dialing).
- Automount disk partitions - switches on and off automatical disk partitions mounting (ext2 and vfat filesystems) and swap partition activation during bootup. On by default.
- Add swap file if low memory - switches on and off automatical swap file creation during bootup. Swap file is created if, and only if, theres less than 16 MB memory available (including potentially activated swap partitions) and theres a disk partition on which it could be created available. On by default.
- Automount NFS /usr - switches on and off /usr filestem mounting via NFS during bootup. NFS path to the filestem must be set using "Mount /usr filesystem via NFS" command in main menu. Off by default.
Manual network card configuration
You can enter network configuration parameters in this window:
- This machines IP - enter IP number for this computer here
- Network mask - enter netmask here. If omitted, mask will be calculated based on IP (which will not necessarily be right).
- Broadcast address - enter network broadcast address here. If omitted broadcast address will be calculated based on IP (not mask! - which will not necessarily be right).
- Default gateway - enter IP address of default network gateway (router) here.
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
PPP configuration
You can enter modem connection configuration parameters in this window:
- Config name - config name (used in existing configuration selection menu).
- Phone number - phone number to dial (eg. 0w202122 for TPSA access modems).
- Username - username to send to remote server
- Password - password to send to remote server
- Nameserver IP(s) - enter one or more (separated by spaces) name servers IP addresses here. Can be omitted, but then domain names couldnt be used.
- Default domain(s) - you can enter one or more (separated by spaces) domain names to search host if incomplete domain names will be used. Its optional.
Because of permanent configuration that is kept on the floppy you should remember to:
- dont write protect the floppy
- dont remove the floppy from the drive (at least during network configuration)
Enhancements:
- bugfixes in netconf reuse code
- disk partitions automounting, swap partitions autoactivating
- automatic swap file creation
- extended support for NFS mountable /usr
- PS/2 mouse support
- new startup logo

Software::Packager is a common software packaging interface.

SYNOPSIS

use Software::Packager;
my $packager = new Software::Packager();
$packager->version(1.2.3.4.5.6);
$packager->package_name("Somename");
$packager->program_name(Software Packager);
$packager->description("This is the description.");
$packager->short_description("This is a short description.");
$packager->output_dir("/home/software/packages");
$packager->category("Applications");
$packager->architecture("sparc");

my %object_data = (
SOURCE => /source/file1,
TYPE => file,
DESTINATION => /usr/local/file1,
USER => joe,
GROUP => staff,
MODE => 0750,
);
$packager->add_item(%object_data);

my $version = $packager->version();
my $name = $packager->package_name();
my $program_name = $packager->program_name();
my $description = $packager->description();
my $description = $packager->short_description();
my $output_directory = $packager->output_dir();
my $category = $packager->category();
my $arch = $packager->architecture();

The Software Packager module is designed to provide a common interface for packaging software on any platform. This module does not do the packaging of the software but is merely a wraper around the various software packaging tools already provided with various operating systems.

This module provides the base API and sets default values common to the various software packaging methods.

KPoker project is a Video Poker game.
KPoker is a KDE-compilant clone of those highly addictive pocket video poker games which are sometimes called "Videopoker".
Enhancements:
- added two player game
- fixed some and added many bugs

Software::Packager::Svr4 is the Software::Packager extension for System VR4 packages.

SYNOPSIS

use Software::Packager;
my $packager = new Software::Packager(svr4);

This module is used to create software packages in a format suitable for installation with pkgadd.

FUNCTIONS

new()

This method creates and returns a new Software::Packager::SVR4 object.

add_item()

$packager->add_item(%object_data);

Adds a new object (file, link, etc) to the package.

package()

$packager->package();

Create the package.

info

This method returns a hash that is filled with the necessary information for a pkginfo file that conforms to the SYSV format.

package_name()

Define the package name.

program_name()

This is used to specify the full package name.

The program name must be less that 256 charaters.

For more details see the pkginfo(4) man page.

architecture()

The architecture must be a comma seperated list of alphanumeric tokens that indicate the architecture associated with the package.

The maximum length of a token is 16 charaters.

A token should be in the format "instruction set"."platform group" where:

instruction set is in the format of `uname -p`

platform group is in the format of `uname -m`

If the architecture is not set then the current instruction set is used.

For more details see the pkginfo(4) man page.

version()

This method is used to check the format of the version and return it in the format required for SVR4.

The version must be 256 charaters or less.

The first charater cannot be a left parenthesis.

The recommended format is an arbitrary string of numbers in Dewey-decimal format. For more datails see the pkginfo(4) man page.

install_dir()

$packager->install_dir(/usr/local);
my $base_dir = $packager->install_dir;

This method sets the base directory for the software to be installed. The installation directory must start with a "/".

compatible_version()

$packager->compatible_version(/some/path/file);
or
$packager->compatible_version($compver_stored_in_string);

my $compatible_version = $packager->compatible_version();

This method sets the compatible versions file for the software to be installed.

space()

$packager->space(/some/path/file);
or
$packager->space($space_data_stored_in_string);

my $space = $packager->space();

This method sets the space file for the software to be installed.
request_script()

$packager->request_script(/some/path/file);
or
$packager->request_script($request_script_stored_in_string);
my $request_script = $packager->request_script();

This method sets the space file for the software to be installed.

eTcl is a "batteries-included", thread-enabled Tcl/Tk runtime, available as a single standalone executable. eTcl includes several popular extensions (Sqlite, Thread, Zlib, ...), together with a Tcl wrapper for the Pixane image processing library.
Installation:
Just copy executable wherever you want on your device (memory or storage card), and launch it.
- Unobstrusive executable. No registry to set, no external dependencies.
- Standalone executable. Tcl and Tk scripts packed into executable (using VFS). Optimized startup time.
New Tcl user experience on PocketPC
- Optimized for XScale devices
- Faster Arc/Chord/Pie emulation, improved for ARM architecture without FPU
- Efficient WSAAsyncSelect() emulation. Sockets, and fileevents on sockets, should be fully functionnal (in both client and server modes)
- Support for native menu
- Improved native look and feel.
- Windows Mobile specific extension: manage SIP, change (X) button action (closing Correct handling of mouse (actually touchscreen) events
- Support for intercepting hotkeys (calendar, notes, etc...)
- New porting approach, based on very minor changes to generic Win32 port (and no changes to generic part of Tcl/Tk distrib).
- Patch to Tcl or Tk distribution is only few kilobytes large, everything else has been moved into a minimal emulation library. This should allow us to keep synced with future Tcl/Tk release.
- Easy build process. Nothing but Evc4 and a native Tcl interpreter required to build binaries for all target architectures supported by Evc (Cygwin, external libraries, etc... not required)
- Works fine into Microsoft Pocket PC 2003 Emulator. Debugging code made easier
Included native extensions:
- Pixane: script your image transformation, support for reading and writing several popular image formats (PNG, JPEG), support for TrueType fonts
- Sqlite 3: a self-contained, embeddable, zero-configuration SQL database engine
- Zlib: native deflate/inflate support
- Zipfs: easily Mount your ZIP files into Tcl Virtual Filesystem
Included Pure Tcl extensions:
- EvoTcl: A very large set of tcl utilities (OOP, Database, HTML/XML parsing, ...). See http://www.evolane.com/software/evotcl/
Enhancements:
- This release focuses on performance optimization (especially for WinCE) and code stabilization.
- It adds support for reading tclkits, together with an automatic tclkit to eTcl kit converter.
- It embeds up-to-date versions of several built-in packages, such as sqlite 3.4.1, libpng 1.2.18, and tile and tkhtml3 CVS snapshots.
- Tile has been moved into the normal version.
- The Mac OS X bundle declares associations so eTcl kits can be launched directly from the Finder.
- Binaries for linux-powerpc have been made compatible with Linux on Playstation 3.

EntityTable provides software that enhances/fixes JTable.
Each table row corresponds to a data Object in a List.
Main features:
- column hiding
- locking
- panning
- row scrolling
- row sorting
- intuitive focus behaviour
- optional virtual rows and columns
- Java 1.4 support