Free parallels workstation review software for linux

Parallel Port Make project is a tool to build FreeBSD ports in parallel to fully take advantage of modern multi-core and processor machines.

Default: pportmake.py --clean -- cleanup --install -job=2 [port1] [portn]

Example: pportmake.py irc/irssi irc/epic

Advanced: pportmake.py -rSvD -j 10 irc/irssi

-h --help Show this help usage message
-c --clean Clean port before compiling
-C --cleanup Clean port after compiling
-d --deinstall Deinstall ports, implied by reinstall
-f --force Force a port and all dependancies to be installed
-G --noconfig Dont recursively configure options
-i --install Install port (default)
-j n --jobs=n Number of threads to use, 1 or 2 per CPU core
is recommended
Default is 2
-O args --options=foo List of arguments to pass to make.
E.g. -O -DX11=yes -DFOO
-r --reinstall Reinstall port and ALL dependancies
-S --maxspeed Try and speed up by maximising CPU usuage.
This may break some ports, use with caution
-w --noclean Dont make clean before compiling
-W --nocleanup Dont make clean after compiling
-v --verbose Be extra verbose
-V --version Show version information
-D --debug Show some debugging info
-P --pretend Dont actually alter the ports

NOTES: It is currently only safe to run 1 copy of this and not have other ports compiling simultaneously

Parallel Network Scanner provides a fast network services scanner.
pnscan is a scanner for TCP network services. It uses multithreading to increase its speed.
pnscan tries to be smart as to how many threads to start - it will dynamically start only as many as is needed to make progress in the scan - up to a maximum either as specified with the "-n" command line option, or 8 minus the maximum number of available file descriptors (pnscan tries to increase
it to the max limit automatically) - or any internal limit on the system (Linux normally only allows 256 threads).
Host ranges can be specified both as a CIDR - network name or IP address / mask bit length and as a range. When using CIDR notation - the first and last address is ignored (normally used for broadcasts)
Some examples:
192.168.0.0/24
192.160.0.1:192.160.0.254
arpanet/8
USAGE - EXAMPLES
# Scan network 192.168.0.0/24 for SSH daemons on port 22
pnscan 192.168.0.0/24 22
pnscan 192.168.0.1:192.168.0.254 ssh
# Scan hosts 192.168.10.34 ... 98 for IDENT servers, max 8 threads
pnscan -n8 -w"VERSION" 192.168.10.34:192.168.10.98 113
# Scan host 127.0.0.1 for WWW servers on all ports
pnscan -w"HEAD / HTTP/1.0rnrn" -r"Server:" 192.168.0.32 1:65525
pnscan -w"HEAD / HTTP/1.0rnrn" -r"Server:" localhost 1:65525
# Send binary data and expect the binary sequence FF 00 FF on port 145.
pnscan -W"05 5A 37" -R"FF 00 FF" 192.168.0.32 145
# Scan for Roxen servers and print the whole Server-line
pnscan -l -w"HEAD / HTTP/1.0rnrn" -r"Roxen" localhost 1:65525
# Scan for pidentd servers and try to locate the version
pnscan -w"VERSION" 192.160.0.0/24 113
# Scan network arpanet/24 for daytime servers and sort them IP-numerically
pnscan arpanet/10 daytime | ipsort
# Read host (&port) lines from stdin and scan the selected hosts for SSH
echo 192.160.10.11 ssh | pnscan -v
echo 192.160.10.12 | pnscan 22
Enhancements:
- pnscan.sgml Added the other options implemented in pnscan.c.
- pnscan.c: Modified the threads startup code to dynamically only start as many threads as is needed.

Parallel::ForkManager is a simple parallel processing fork manager.

SYNOPSIS

use Parallel::ForkManager;

$pm = new Parallel::ForkManager($MAX_PROCESSES);

foreach $data (@all_data) {
# Forks and returns the pid for the child:
my $pid = $pm->start and next;

... do some work with $data in the child process ...

$pm->finish; # Terminates the child process
}

This module is intended for use in operations that can be done in parallel where the number of processes to be forked off should be limited. Typical use is a downloader which will be retrieving hundreds/thousands of files.

Parallel MPI BZIP2 is a parallel implementation of the bzip2 block-sorting file compressor that uses MPI and achieves significant speedup on cluster machines.

The output of this version is fully compatible with bzip2 v1.0.2 or newer (ie: anything compressed with mpibzip2 can be decompressed with bzip2). MPIBZIP2 should work on any system that has a pthreads compatible C++ compiler (such as gcc). It has been tested on: Linux and Solaris.

NOTE: If you are looking for a parallel BZIP2 that works on multi-processor/muti-core/SMP machines, you should check out PBZIP2 which was designed for a multi-threaded shared-memory architecture.

Usage:

Run mpibzip2 for the help listing.
==================================================================
Usage: mpibzip2 [-1 .. -9] [-b#cdfktvV] < filename > < filename2 > < filenameN >

-b#: where # is the file block size in 100k (default 9 = 900k)
-c : output to standard out (stdout)
-d : decompress file
-f : force, overwrite existing output file
-k : keep input file, dont delete
-t : test compressed file integrity
-v : verbose mode
-V : display version info for mpibzip2 then exit
-1 .. -9 : set BWT block size to 100k .. 900k (default 900k)

Example: mpibzip2 -b15k myfile.tar
Example: mpibzip2 -v -5 myfile.tar second*.txt
Example: mpibzip2 -d myfile.tar.bz2

DS1624 parallel port thermometer is a simple driver for a thermometer device based on DS1624 and connected to the computer via one of the parallel ports.
The hardware board is inspired by a project by Christophe G.
Enhancements:
- A parallel port to I2C converter schematic was added.
- The project page was cleaned up.

F-Prot Antivirus security software package has various components that help keep your system secure from viruses, backdoors, trojans and other malicious programs. The project includes the RealTime Protector, a memory-resident monitoring utility that observes all files accessed on your system, a Scheduler where you can set the Scanner to make automatic scans or updates on your system at any time and an Updater to manage all signature updates.
For home users using the Linux open-source operating system, we offer F-Prot Antivirus for Linux Workstations. F-Prot Antivirus for Linux Workstations utilizes the renowned F-Prot Antivirus scanning engine for primary scan but has in addition to that a system of internal heuristics devised to search for unknown viruses
F-Prot Antivirus for Linux was especially developed to effectively eradicate viruses threatening workstations running Linux. It provides full protection against macro viruses and other forms of malicious software - including Trojans.
Main features:
- Scans for over 191534 known viruses and their variants
- Ability to perform scheduled scans when used with the cron utility
- Scans hard drives, CD-ROMS, diskettes, network drives, directories and specific files
- Scans for images of boot sector viruses, macro viruses and Trojan Horses
F-Prot Antivirus for Linux Workstations is FREE for use by personal users on personal workstations

Black Orion Network is an update and system management platform for among others Black Orions redhat-compatible Enterprise Linux Distributions. Black Orion Enterprise Linux software distributions are offered to you by the open source community as free software.

A program is free software if users are free to redistribute copies, either with or without modifications, either gratis or charging a fee for distribution, to anyone anywhere. Being free to do these things means (among other things) that you do not have to ask or pay for permission. Please feel free to make and redistribute as many copies of Black Orion Enterprise Linux as you like.

How It Works:

1. Obtain Black Orion Enterprise Linux

Obtain one of Black Orions redhat-compatible Enterprise Linux Distributions from the downloads section.

2. Burn cd images

Burn the downloaded iso images on to a cd.

3. Register yourself as a Black Orion Network Member

Register yourself as a member in the Black Orion Network section.

4. Install Black Orion on a computer

Read the manuals for the various installation options. The system can also be installed as a rhel4 virtual machine.

5. Connect your system to the Black Orion Network

Connect your system to the Black Orion Network with the up2date client installed on your system. You can find up2date by right-clicking the Black Orion Network Alert Icon on your desktop. Connect your system with your member name and password (see 3).