Free output express software for linux

Sys::OutPut is a Perl module to help make output easier.

SYNOPSIS

usage Sys::OutPut;

talk $fmtstr [, @args];

out $fmtstr [, @args];

put $fmtstr [, @args];

err $fmtstr [, @args];

debug $fmtstr [, @args];

$Sys::OutPut::quiet = $::quiet;

$Sys::OutPut::debug = $::debug;

These subroutines will make generating output to STDOUT and STDERR easier.

All of the routines treat the $fmtstr argument as a printf format string, with @args as the format string arguments.

The talk routine generates output to STDERR only if the variable $Sys::OutPut::quiet is non-null and non-zero.

The out routine generates output to STDOUT, with a newline appended to , if it is not already terminated with one.

The put routine generates output to STDOUT, without any additional trailing newline.

The err routine generates output to STDERR, with a newline appended if needed.

The debug routine generates output to STDERR only if the variable

$Sys::OutPut::debug is non-null and non-zero, which is also returned as the result.

This allows for convenient usages such as in the following example:

sub foo {
...
return if debug "Stopping now.";
...
next if debug "Skipping further processing";
...
}

If not defined by the user, the $Sys::OutPut::quiet and $Sys::OutPut::debug variables are initialized from their corresponding main variables $::quiet and $::debug, respectively, unless they are already defined.

XML::Output is a Perl module for writing simple XML documents.

SYNOPSIS

use XML::Output;

open(FH,>file.xml);
my $xo = new XML::Output({fh => *FH});
$xo->open(tagname, {attrname => attrval});
$xo->pcdata(element content);
$xo->close();
close(FH);

ABSTRACT

XML::Output is a Perl module for writing simple XML documents

XML::Output is a Perl module for writing simple XML document. The following methods are provided.

new
$xo = new XML::Output;
Constructs a new XML::Output object.

open
$xo->open(tagname, {attrname => attrval});
Open an element with specified name (and optional attributes)

close
$xo->close;
Close an element

empty
$xo->empty(tagname, {attrname => attrval});
Insert an empty element with specified name (and optional attributes)

pcdata
$xo->pcdata(element content);
Insert text

comment
$xo->comment(comment text);
Insert a comment

xmlstr
print $xo->xmlstr;
Get a string representation of the constructed document

This project is to produce drivers for the Logitech Quickam Express that will run popular linux software, such as video for linux.

This site hosts the Linux driver for the QuickCam Express and other QuickCam-related and QuickCam-compatible USB web cameras. The original work was done by Georg Acher and was known as qce-ga; Jean-Frederic Clere took that driver and created the first Video4Linux (V4L) driver, enabling popular V4L applications such as Xawtv to display pictures from the webcam. Since then, a group of developers around the world have evolved the driver into its current state, adding support for new cameras and chipsets as they have become available. In the process, the driver became known as qc-usb to reflect the fact that it supports a wide variety of USB-attached QuickCam cameras, not just the QuickCam Express.

The qc-usb driver supports the following webcams:

Dexxa Webcam
Labtec Webcam (old model)
LegoCam
Logitech QuickCam Express (old model)
Logitech QuickCam Notebook (some models)
Logitech QuickCam Web

Generally, any USB camera with a USB vendor ID of 0x46d and a USB product ID of 0x840, 0x850, or 0x870 (so, 0x46d:0x840, for example), should work. You can see the USB ID using operating system utilities such as lsusb in Linux.

acoc is a regular-expression based colour formatter for programs that display output on the command-line. It works as a wrapper around the target program, executing it and capturing the stdout stream. Optionally, stderr can be redirected to stdout, so that it, too, can be manipulated. acoc then applies matching rules to patterns in the output and applies colours to those matches.

Ever wondered why the output of your favourite UNIX/Linux commands is still displayed in black-and-white after all these years?

Ever had to search back through your scroll-buffer in search of gcc errors and salient information to tell you what went wrong with your programs execution?

acoc is a regular expression based colour formatter for programs that display output on the command-line. It works as a wrapper around the target program, executing it and capturing the stdout stream. Optionally, stderr can be redirected to stdout, so that it, too, can be manipulated.

acoc then applies matching rules to patterns in the output and applies colour sets to those matches. A picture is worth a thousand words, so look at the sample screenshots in the next section.

Configuration

The configuration files used by the program are /usr/local/etc/acoc.conf, /etc/acoc.conf and ~/acoc.conf. One or more of these must exist. A sample /etc/acoc.conf is supplied with some example matching rules.

Blank lines and those that begin with a # are ignored.

A program configuration stanza is introduced as follows:

[program_spec]

The square brackets are mandatory literal characters. Alternatively, the @ symbol may be used, to allow [ and ] to retain their usual semantics in program specs comprising a regular expression:

@program_spec@

program_spec is defined as one or more instances of the following component, separated by a comma:

invocation[/flags]

where invocation consists of the programs name (not including its directory path component) plus any initial arguments.

Alternatively, invocation may be a regular expression, which can be used to match multiple programs and/or command-line arguments in arbitrary order. Regular expressions are automatically anchored to the beginning of the command line.

flags, if present, is separated from invocation by a slash and consists of one or more of the following characters:

a
continue to attempt to find matching patterns after the first match has been found. By default, acoc will stop processing a line and display it after the first match has been found.
e
redirect the target programs stderr to stdout, allowing it, too, to be matched by rules
p
allocate a pseudo-terminal in which to run the target program

Some programs, such as ls(1), behave differently when their stdout is not connected to a tty. Use of this option will fool the target program into believing it is outputting to a tty, rather than a pipe to acoc.

Use of this flag requires Masahiro Tomitas Ruby/TPty library to be installed. Otherwise, the flag is silently ignored.

Note that the pseudo-terminal communication enabled by this flag is one-way only, from the target program to acoc. It is thus not possible to use acoc in combination with interactive programs, such as the interactive Ruby interpreter (irb).
t
apply colour formatting even if stdout is not a tty. By default, formatting is not applied if the output stream is not attached to a terminal.

Heres an example of a line that introduces a configuration stanza:

[rpm/ae,rpmbuild/ae]

which says to apply the following rules to the rpm and rpmbuild commands, attempt to apply all matching rules, and also apply those rules to the programs stderr stream.

Another example:

[ls/p]

This says to allocate a pseudo-terminal to ls(1), fooling it into believing that its output is being sent to a regular terminal instead of a pipe to acoc.

With this flag, the effect will be this:

$ ls
file1 file2 file3 file4 file5 file6

Without it, ls will detect that its stdout is connected to a pipe and behave accordingly:

$ ls
file1
file2
file3
file4
file5
file6

A third example:

[diff/t,rcsdiff/t,cvs diff/t,p4 diff/t]

This says that the rules that follow should be applied to all invocations of diff(1) and rcsdiff(1), as well as those invocations of cvs(1) and p4 that are followed by the argument diff.

Additionally, colouring should be applied even when stdout is not connected to a tty, so that the colours still show up when the output is displayed in a pager such as more(1) or less(1).

Yet another example:

/ps -.*(e.*f|f.*e)/

In this example, the ps(1) command will be matched, as long as the e and f options are both passed in either order.

An alternative way to write the above spec is:

@ps -.*[ef].*[ef]@

There are two things to note in this alternative:

1. @ has been used to delimit the spec, because [ and ] are required for the character lists in the regular expression.
2. While this form is less specific (in that it allows matches against duplicated command line options), it makes for considerably shorter specs if one wishes to test for the inclusion of a set of more than 2 or 3 command line flags. In the original form, one must manually list all of the possible permutations, which is equal to x! (factorial). For 3 command line flags, this is 6 permutations; for 4, it is 24, etc.

Heres one more example:

[tcpdump/r]

If this were placed in ~/.acoc.conf, it would remove any matching rules that had been installed for the diff command by either /etc/acoc.conf or /usr/local/etc/acoc.conf.

After defining the program name and operational flags, matching rules can be defined. These take the following form:

/regex/[flags] colour_spec

where regex is a Ruby-compatible regular expression. The delimiting / characters can be any character, as long as that character is not present in the regular expression itself. flags, if present, consists of one or more characters from the following list:

g
find every match on the line, not just the first. When using this flag, regex should not include parentheses.

colour_spec is defined as a comma-separated list of one or more colour_groups, which are defined as a plus-separated (+) list of one or more of the following:

* black
* blink
* blue
* bold
* clear
* concealed
* cyan
* dark
* green
* italic
* magenta
* negative
* on_black
* on_blue
* on_cyan
* on_green
* on_magenta
* on_red
* on_white
* on_yellow
* rapid_blink
* red
* reset
* strikethrough
* underline
* underscore
* white
* yellow

Examples of a colour_group are white+bold, black+on_white, etc. A complete colour_spec might look like this:

red+bold,white,yellow+bold,black+on_green

Except when using the g flag, each component of the regex that you wish to colour should be placed in parentheses. Text outside parentheses will be used for matching, but will not be coloured.

For example, examine the following:

/^(d+)foos*(w+)/

This will match a line that starts with more or one digits, followed by the string foo and any amount of white space, followed by one or more word characters. However, only the initial group of digits and the group of word characters will be coloured. The string foo and the white space that follows it will be used for matching, but will not be coloured.

Separated from the regex by white space is the colour_spec. Usually, you will include in this as many colours (separated by commas) as you have parenthesised expressions in the regex. However, its also permissible to have fewer. If, for example, you have three parenthesised expressions in the regex, but only two colours listed in the colour_spec, then the second colour will be used for colouring both the second and third matches.

If you have more colours listed in the colour_spec than there are parenthesised expressions in the regex, the surplus colours are ignored.

When using the g flag to perform a global match on the line, you may list as many colours as you want. The same rules apply here. If there are more matches than colours, the remaining matches will be coloured using the last colour listed. Surplus colours are ignored.

phpautotest is a tool for conducting automated regression tests on PHP-driven Web sites. Variable values as well as HTTP output can be tested.

HTTP output is tested using regular expressions.