Free operating system software software for linux

J Operating System is primarily intended for programmers.
Target Users:
- Hobbiests--You used to buy computers to do programming. They didnt do much else. Windows doesnt even come with a compiler, which is ironic since Bill Gates wrote BASIC. The "J" operating system is primarily intended for programmers. Ive attempted to lower the bar, so amateurs can contribute. I hope to recreate the dynamic environment that used to exist when the Commodore 64 was around and everyone was creating odd-ball software.
- Researchers--Im sure many lab researchers still use DOS because they have to interact with hardware, which is difficult with Windows.
Main features:
- No security! You can access all ports, memory and disk blocks to your hearts content. When youre working with your own computer, security just gets in the way and makes things slow--I hate anti-virus and anti-spyware because they just slow things down. When you know you dont have a risk, have no secrets and do regular back-ups, who needs security?
- Uniformity
- There is no virtual memory and everyone is on the same address-map. You can easily communicate between tasks, passing addresses. Addresses start at a base of zero and, essentually, segment registers are not used.
- There is basically one language to learn called "C+" which is a little more than "C", but less than "C++". You dont need to learn a scripting langauge because everything uses this syntax.
- There is an extension of ASCII called "J" rich text which allows colors, links, graphics and various widgets in your documents. This format is used in source code, documents, help, menus, etc.
- Support for compressed, encrypted and contiguous files.
- FAT32, FAT12 and ISO9660 filesystems.
- Blazing-fast compiler which can recompile everything in 5 seconds. It doesnt optimize.
- All source code is included and its still around a Meg.
Hardware:
- PS/2 mouse and keyboard
- VGA graphics
- Some hard drives. Must be on the primary or secondary IDE controller and support LBA28. Drives of 120Gig are the limit.
- Some CD-ROM/DVD drives, including burning.
- Some floppies. Just 1.44Meg and not all types.
- No USB support yet
- No network support yet
- ASCII printers on the parallel port are supported.

Inferno is a compact operating system designed for building distributed and networked systems on a wide variety of devices and platforms.
Inferno was originally developed at Bell Labs (the research division of Lucent Technologies).
Inferno Operating System is a well-designed, economical operating system particularly suitable for use in networked devices such as advanced telephones, hand-held devices, TV set-top boxes, and many other embedded applications.
Inferno can run in native mode on an embedded system or in emulation mode under many different operating systems. Inferno has many features in common with Plan 9.
Cross-Platform Portability
Inferno can run as a user application on top of an existing operating system or as a stand alone operating system. Most of the popular operating systems and processor architectures are supported:
Host Operating Systems:
- Windows NT/2000/XP
- Irix
- Linux
- MacOS X
- FreeBSD
- Solaris
- Plan 9
Supported Architectures:
- Intel x86 (386 & higher)
- Intel XScale
- IBM PowerPC
- ARM StrongARM (ARM & Thumb)
- Sun SPARC
Inferno also runs as a plug-in under Internet Explorer version 4 and higher. Each Inferno system presents an identical environment to the applications, irrespective of the underlying host OS or architecture, allowing the developer to work with a truly homogeneous environment across multiple different platforms.
Portable Applications
Inferno applications are written in Limbo, a modern, safe, modular, concurrent programming language with C-like syntax. It is more powerful than C but considerably easier to understand and debug than C++ or Java. Limbo code is compiled into architecture independent byte code which is then interpreted (or compiled on the fly) on the target processor. This means that any Inferno application will run identically on all Inferno platforms.
Transparent Resources
Inferno offers complete transparency of resources and data using a simple but powerful namespace system. By representing resources as files and having one standard communication protocol, resources such as data stores, services and external devices can easily be shared between Inferno systems. A resource interface may be imported to the local system and used by the applications without them knowing, or needing to know, whether it is local or remote.
Security
High level security is an important part of the Inferno system. By using one standard protocol for all network communication, security can be focused on one point and provided at a system level. Inferno offers full support for authenticated, encrypted connections using a certificate based user identification scheme and variety of algorithms including:
- IDEA, 56 bit DES, 40, 128 and 256 bit RC4 encryption algorithms
- MD4, MD5 and SHA secure hash algorithms
A Complete Solution
Inferno is not only an operating system, it is also a complete development environment, providing all the tools necessary for creating, testing and debugging the applications that run within it.
- Acme IDE: includes editor, shell, advanced pattern matching tools & more
- Fast Compiler: with full syntax and compile time type checking
- Graphical Debugger: with full stack trace for currently executing threads
- Powerful Shell: with sophisticated scripting capabilities
- UNIX like commands: including bind, grep, gzip, mount, ps, tar, yacc...
Enhancements:
- New licence terms (a `dual licence scheme allowing use as Free Software)
- Styx revision based on 9P2000, and consequent changes to Sys
- Authentication changes
- Improved colour graphics support, including compositing
- Scalable fonts using Freetype
- Revamped Tk implementation
- Window management moved out of Tk to a separate window manager in Limbo
- Limbo: exception handling and fixed-point
- Limbo: other possible changes
- Dis VM changes
- More commands and library modules
- Better network service configuration
- /net/dns served by host and native DNS resolver
- Hosted kernels configured from a parts list as for native kernels
- Signed modules
- Internet Explorer plug-in revised and in source form
- Expanded documentation

Amiga Research Operating System (AROS) is a portable and free desktop operating system aiming at being compatible with AmigaOS 3.1, while improving on it in many areas. The source code is available under an open source license, which allows anyone to freely improve upon it.

Goals

The goals of the AROS project is it to create an OS which:

1. Is as compatible as possible with AmigaOS 3.1.
2. Can be ported to different kinds of hardware architectures and processors, such as x86, PowerPC, Alpha, Sparc, HPPA and other.
3. Should be binary compatible on Amiga and source compatible on any other hardware.
4. Can run as a standalone version which boots directly from hard disk and as an emulation which opens a window on an existing OS to develop software and run Amiga and native applications at the same time.
5. Improves upon the functionality of AmigaOS.

To reach this goal, we use a number of techniques. First of all, we make heavy use of the Internet. You can participate in our project even if you can write only one single OS function. The most current version of the source is accessible 24 hours per day and patches can be merged into it at any time. A small database with open tasks makes sure work is not duplicated.

History

Some time back in the year 1993, the situation for the Amiga looked somewhat worse than usual and some Amiga fans got together and discussed what should be done to increase the acceptance of our beloved machine. Immediately the main reason for the missing success of the Amiga became clear: it was propagation, or rather the lack thereof. The Amiga should get a more widespread basis to make it more attractive for everyone to use and to develop for. So plans were made to reach this goal. One of the plans was to fix the bugs of the AmigaOS, another was to make it an modern operating system. The AOS project was born.

But exactly what was a bug? And how should the bugs be fixed? What are the features a so-called modern OS must have? And how should they be implemented into the AmigaOS?

Two years later, people were still arguing about this and not even one line of code had been written (or at least no one had ever seen that code). Discussions were still of the pattern where someone stated that "we must have ..." and someone answered "read the old mails" or "this is impossible to do, because ..." which was shortly followed by "youre wrong because ..." and so on.

In the winter of 1995, Aaron Digulla got fed up with this situation and posted an RFC (request for comments) to the AOS mailing list in which I asked what the minimal common ground might be. Several options were given and the conclusion was that almost everyone would like to see an open OS which is compatible to AmigaOS 3.1 (kickstart 40.68) on which further discussions could be based upon to see what is possible and what is not.

So the work began and AROS was born.

KIWI Image System provides a complete operating system image solution for Linux supported hardware platforms as well as for virtualisation systems like Xen Qemu or VMware. The KIWI architecture was designed as a two level system. The first stage, based on a valid software package source, creates a so called physical extend according to the provided image description. The second stage creates from a required physical extend an operating system image. The result of the second stage is called a logical extend or short an image.
A normal installation process is starting from a given installation source and installs single pieces of software until the system is complete. During this process there may be manual user intervention required. However an operating system image represents an already completed installation encapsulated as a file and optionally includes the configuration for a specific task. Such an operating system starts working as soon as the image has been brought to a system storage device no matter if this is a volatile or non volatile storage. The process of creating an image takes place without user interaction.
This means all requirements of the encapsulated system has to be fulfilled before the image is created. According to this the so called image description tree stores all the information needed to create an image.
Main features:
- Distribution independent
- Support for virtualisation systems like Xen
- Support for deploying images over the network
- Support for VMware / Qemu images
- Support for USB-Stick systems
- Support for LiveCD/DVD systems
- Centralized image description based on XML
- Prebuild boot images for SUSE systems
- Prebuild PXE configuration usable with kiwi netboot images
- SUSE Linux on a 128MB flash card.. yes thats possible

Habitat from System Garden is a performance monitor of applications and operating system with the ability to track availability and service level. System Garden Habitats design goals are to be of modest size, flexible and ubiquitous.

The core of habitat provides a mechanism for collecting, storing and distributing data. Out of the box are many useful system collectors, known as probes.

Additionally, there is an API available to extend the collector (known as clockwork) with plug-ins, which allows data to be pulled from applications. Another API and a command line interface lets applications and scripts of all types push information into the collection system.

Myah is an Operating System based on the Linux kernel. Myah is a "Live CD", so no installation is required. Myah Linux Operating System runs right off the CD, putting whatever system files it needs into RAM only.
You simply start up your PC with the Myah CD. Once youre done with Myah, simply restart your PC. The CD will eject automatically and all will be exactly as it was before.
Our goal is to bring you the best free Operating System and to inform PC owners they dont have to spend their money on Windows or OS X. There is something better, and its free. Whenever we improve Myah or Linux in general those updates will be free.
There are many Linux-based Live CDs our there. So weve made sure Myah is different by including the programs youre going to use on a daily basis. To Windows users the unfamiliar Linux program names can be confusing. So weve changed the menus to make sense. For instance Kopete, a Linux instant messenger service, is simply called Messenger.
Programs have been added to the task bar for quick and easy access. Also: the user isnt hassled for any information during startup. Myah boots up completely on its own. It starts in the main administrative account called Root.
The user has full rights. And since Myah runs right off the CD you cant break it.This whole website is committed to bringing people the best of Linux and its software, so we advertise many other Linux Operating Systems. As a plus for people who cant leave Windows (tm), we offer the Live CD. And its all free for everyone to use. So please: dont waste your money.
Main features:
- Its just as easy as putting the Myah CD in your computer and rebooting. Everything is automatic, detecting your hardware, even your internet connection. All this is done without making any permenet changes to your computer. At anytime just reboot the computer, and your normal system is back.
- Myah uses the KDE destop, that comes with a great set of utilities. Control Center you have the power to tune the system as you like. K3b is Myahs CD burning programs. K3b is powerful easy to use program.
- Myah lets you breeze though the Internet with Firefox. And if you have ever wanted to try creating you own Websites NVU is included. NVU makes it possible to create professional looking Webpages, without knowing html. Just point and click.
- If office software is a must, Open Office has every thing you need. While working is nice to have something to listed to. Realplayer can handle radio stations form Shoutcast, or even let you check out there latest videos online.
- Myahs messanger Kopete will let you stay connected to with anyone, no matter what service they might use. And for all those photos Gimp is a complete solution. Myah comes Jam packed with many other programs, all in a simple and easy to use menu. Just click the penguin and begin.
Enhancements:
- Myah OS 3 Tech Demo 2 is now available. This is still a development release but it should be fairly stable and have a well rounded selection of applications. It should mirror what the Xfce version of 3.0 will look like. There are still three objectives that need to be met before 3.0 stable: firstly, to get the system well tested to weed out any bugs or setting changes, secondly, to work on Myahs package management system, and finally, there is still no actual installer. Both binary packages and source packages will be made available and since the bulk of the system has been completed, development should come much faster from now on.

Kate OS is a multitasking operating system, which brings all that is necessary for: programmers, webmasters, administrators and home users. The most important Kate OS features are high efficiency, safety, reliability and low system requirements.
Kate OS contains full support for generally used multimedia. Kate OS is a perfect combination of Linux power and utility. The complexity of installed software makes using the system comfortable, immediately after the installation process. Looking for a perfect solution for the experienced UNIX user? Kate OS is perhaps the best one.
Kate OS combines advantages of all these system types. The installation and configuration process of Kate OS is not as simple as in desktop distributions, but the stability and efficiency are incomparably higher.
The new version contains many improvements and modifications over Kate 1.0. The system has been reconstructed from the ground up and is no longer based on Slackware. Kate OS became much more comprehensive, now it contains greater set of programs and libraries.
Applications, which have been added to simplify your work, are:
- Leafpad- simple, but very functional text editor, similar to Notepad;
- Abiword- advanced text editor;
- Firefox- well-known internet browser;
- Thunderbird- mail client;
- GNU Gadu 2- program working with Gadu-Gadu and Tlen.pl;
Desktop Enviroment- Xfce 4.2 adds some fresh impressions and possibly will satisfy each user. System also contains Aspell and Ispell dictionaries. Kate 2.0 has an extended system of packages, TGZex, which has been adapted for remote actualization.
Kate 2 uses up-to-date sound system ALSA, the older solution OSS is not supported any more. The packages in TGZex standard are adjusted to remote system updating, wich will be available soon- their possibilities have completely replaced the sysupdate tool.
System supports the solution called "supermount", which frees the user from manually mounting and unmounting removable media. To enable this option, you should just uncomment proper lines in /etc/fstab.
And whats the most important thing? The system has acquired a new effectiveness through Kernels 2.6 infrastructure. Kate 2.0 ZYKLON is a perfect solution for desktop and server, you may enter the world of many recent technologies used in Linux. Reveal their power!
Kate Linux 2.3 requirements:
- i486
- 24 MB RAM
- 300 MB HD (For ROOT and SWAP)
- VGA card
- soundcard (optional)
- CDROM (bootable), floppy
Whats New in 2.3 Stable Release:
- We are proud to present the newest milestone release of Kate OS II series. Kate OS 2.3 brings 2.6.14.2 kernel with Reiser4 support, the newest glibc library, XFce 4.2.3.2 desktop environment and many other applications in current versions. We have modified system boot scripts so they present the boot sequence in a clear way. Another new addition in Kate OS is a hardware detection tool discovery, which detects and configures system hardware. ... Additionally, the DVD edition contains GNOME 2.12.1 and KDE 3.4.3 (optimized for i686 class processors).

Kwort Linux is an free operating system. Based on slackware, it provides a solid, simple and stable base system.

Kworts desktop and applications are completely based on the gtk2 toolkit. It uses the Xfce desktop as default with some modifications.

At the moment Kwort provides its own tools for retrieving packages from our mirrors called kpkg.