onesixtyone snmp scanner
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 347
onesixtyone SNMP scanner 0.3.2
onesixtyone is an efficient SNMP scanner which utilizes a sweep technique to achieve extreme performance. more>>
onesixtyone is an efficient SNMP scanner which utilizes a sweep technique to achieve extreme performance. The SNMP protocol is a stateless, datagram oriented protocol. An SNMP scanner is a program that sends SNMP requests to multiple IP addresses, trying different community strings and waiting for a reply. Unfortunately SNMP servers dont respond to requests with invalid community strings and the underlying UDP protocol does not reliably report closed UDP ports. This means that no response from the probed IP address can mean either of the following:
machine unreachable
SNMP server not running
invalid community string
the response datagram has not yet arrived
The approach taken by most SNMP scanners is to send the request, wait for n seconds and assume that the community string is invalid. If only 1 of every hundred scanned IP addresses responds to the SNMP request, the scanner will spend 99*n seconds waiting for replies that will never come.
Thats why traditional SNMP scanners are very inefficient.
onesixtyone takes a different approach to SNMP scanning. It takes advantage of the fact that SNMP is a connectionless protocol and sends all SNMP requests as fast as it can. Then the scanner waits for responses to come back and logs them, in a fashion similar to Nmap ping sweeps. By default onesixtyone waits for 10 milliseconds between sending packets, which is adequate for 100Mbs switched networks. The user can adjust this value via the -w command line option. If set to 0, the scanner will send packets as fast as the kernel would accept them, which may lead to packet drop.
Running onesixtyone on a class B network (switched 100Mbs with 1Gbs backbone) with -w 10 gives us a performance of 3 seconds per class C, with no dropped packets. All 65536 IP addresses were scanned in less than 13 minutes.
onesixtyone sends a request for the system.sysDescr.0 value, which is present on almost all SNMP enabled devices. This returned value gives us a description of the system software running on the device. Here is an excert of a log file:
192.168.120.92 [1234] HP ETHERNET MULTI-ENVIRONMENT,ROM A.05.03,JETDIRECT,JD24,EEPROM A.05.05
130.160.108.146 [public] Hardware: x86 Family 15 Model 0 Stepping 10 AT/AT
COMPATIBLE - Software: Windows 2000 Version 5.0 (Build 2195 Uniprocessor Free)
192.168.112.64 [public] Power Macintosh, hardware type 406; MacOS 9.0; OpenTransport 2.5.2
192.168.104.254 [public] Novell NetWare 4.11 August 22, 1996
192.168.112.83 [public] Macintosh Quadra 650, System Software 7.1
192.168.244.210 [public] RICOH Aficio 850 / RICOH Network Printer D model
192.168.240.39 [public] Cisco Systems WS-C5000
192.168.244.103 [public] HPJ3210A AdvanceStack 10BT Switching Hub Management Module, ROM A.01.02, EEPROM A.01.01, HW A.01.00
Enhancements:
- fixed version number and added a Makefile
<<lessmachine unreachable
SNMP server not running
invalid community string
the response datagram has not yet arrived
The approach taken by most SNMP scanners is to send the request, wait for n seconds and assume that the community string is invalid. If only 1 of every hundred scanned IP addresses responds to the SNMP request, the scanner will spend 99*n seconds waiting for replies that will never come.
Thats why traditional SNMP scanners are very inefficient.
onesixtyone takes a different approach to SNMP scanning. It takes advantage of the fact that SNMP is a connectionless protocol and sends all SNMP requests as fast as it can. Then the scanner waits for responses to come back and logs them, in a fashion similar to Nmap ping sweeps. By default onesixtyone waits for 10 milliseconds between sending packets, which is adequate for 100Mbs switched networks. The user can adjust this value via the -w command line option. If set to 0, the scanner will send packets as fast as the kernel would accept them, which may lead to packet drop.
Running onesixtyone on a class B network (switched 100Mbs with 1Gbs backbone) with -w 10 gives us a performance of 3 seconds per class C, with no dropped packets. All 65536 IP addresses were scanned in less than 13 minutes.
onesixtyone sends a request for the system.sysDescr.0 value, which is present on almost all SNMP enabled devices. This returned value gives us a description of the system software running on the device. Here is an excert of a log file:
192.168.120.92 [1234] HP ETHERNET MULTI-ENVIRONMENT,ROM A.05.03,JETDIRECT,JD24,EEPROM A.05.05
130.160.108.146 [public] Hardware: x86 Family 15 Model 0 Stepping 10 AT/AT
COMPATIBLE - Software: Windows 2000 Version 5.0 (Build 2195 Uniprocessor Free)
192.168.112.64 [public] Power Macintosh, hardware type 406; MacOS 9.0; OpenTransport 2.5.2
192.168.104.254 [public] Novell NetWare 4.11 August 22, 1996
192.168.112.83 [public] Macintosh Quadra 650, System Software 7.1
192.168.244.210 [public] RICOH Aficio 850 / RICOH Network Printer D model
192.168.240.39 [public] Cisco Systems WS-C5000
192.168.244.103 [public] HPJ3210A AdvanceStack 10BT Switching Hub Management Module, ROM A.01.02, EEPROM A.01.01, HW A.01.00
Enhancements:
- fixed version number and added a Makefile
Download (0.007MB)
Added: 2006-07-03 License: GPL (GNU General Public License) Price:
1215 downloads
Adeos Filesystem Security Scanner 1.0
Adeos (named after the obscure Roman goddess of modesty) is an automated filesystem security scanner. more>>
Adeos (named after the obscure Roman goddess of modesty) is an automated filesystem security scanner. It recursively walks all mounted filesystems on the local system and attempts to identify common security concerns such as SUID and world-writeable files.
The output is available as text or html, with either output type formatted in either report or list style. Text is written to stdout and is redirected to a file, while HTML is written to a file named results.html in the local directory.
Adeos should compile and run on almost any UNIX-type system. It has been tested on Sun Solaris and Linux 2.x.
Adeos must be run from a non-priveleged user account on the system. Since a priveleged account, such as root has much greater priveleges than a standard user, the results would be meaningless.
Adeos supports three scan modes: normal, verbose, and paranoid. A brief description of what each looks for is below.
normal: Set-User-ID (SUID) files, Set-Group-ID (SGID) files, world-writeable files, and world-writeable directories. (Default mode)
verbose: Everything that a Normal scan looks for, "Sticky" files, unreadable directories, and inaccessible files.
paranoid: Everything Normal and Verbose scans look for, world-readable files, world-executable files, world-readable directories, and world-executable directories.
Adeos supports the following command-line options. Note that if you want to use multiple options you must specify each one individually.
-d Include dynamic directories (/dev /devices /proc /tmp) in the scan.
-h Place output in an HTML file named results.html
-r Format output as a collated report.
--help Display usage and help information.
A default Adeos run performs a Normal mode scan with list-formatted text output.
<<lessThe output is available as text or html, with either output type formatted in either report or list style. Text is written to stdout and is redirected to a file, while HTML is written to a file named results.html in the local directory.
Adeos should compile and run on almost any UNIX-type system. It has been tested on Sun Solaris and Linux 2.x.
Adeos must be run from a non-priveleged user account on the system. Since a priveleged account, such as root has much greater priveleges than a standard user, the results would be meaningless.
Adeos supports three scan modes: normal, verbose, and paranoid. A brief description of what each looks for is below.
normal: Set-User-ID (SUID) files, Set-Group-ID (SGID) files, world-writeable files, and world-writeable directories. (Default mode)
verbose: Everything that a Normal scan looks for, "Sticky" files, unreadable directories, and inaccessible files.
paranoid: Everything Normal and Verbose scans look for, world-readable files, world-executable files, world-readable directories, and world-executable directories.
Adeos supports the following command-line options. Note that if you want to use multiple options you must specify each one individually.
-d Include dynamic directories (/dev /devices /proc /tmp) in the scan.
-h Place output in an HTML file named results.html
-r Format output as a collated report.
--help Display usage and help information.
A default Adeos run performs a Normal mode scan with list-formatted text output.
Download (0.029MB)
Added: 2006-07-13 License: GPL (GNU General Public License) Price:
1200 downloads
Just Another Port Scanner 0.1
Just Another Port Scanner (JAPS) is an easy to use, bare-bones TCP port scanner. more>>
Just Another Port Scanner (JAPS) is an easy to use, bare-bones TCP port scanner. JAPS requires the GTK+ library to run. I created JAPS because I felt it would be a fun project and I wanted to learn GTK+ programming basics.
To compile an install JAPS just type make.
Todo
Add subnet scanning
Add progress bar
Display service name next to port number in results box
If you have any suggestions please contact me. 1
<<lessTo compile an install JAPS just type make.
Todo
Add subnet scanning
Add progress bar
Display service name next to port number in results box
If you have any suggestions please contact me. 1
Download (0.029MB)
Added: 2006-07-04 License: GPL (GNU General Public License) Price:
1210 downloads
Nmap::Scanner 0.9
Nmap::Scanner is a Perl module to perform and manipulate nmap scans using perl. more>>
Nmap::Scanner is a Perl module to perform and manipulate nmap scans using perl.
SYNOPSIS
Perl extension for performing nmap (www.insecure.org/nmap) scans.
use Nmap::Scanner;
# Batch scan method
my $scanner = new Nmap::Scanner;
$scanner->tcp_syn_scan();
$scanner->add_scan_port(1-1024);
$scanner->add_scan_port(8080);
$scanner->guess_os();
$scanner->max_rtt_timeout(200);
$scanner->add_target(some.host.out.there.com.org);
# $results is an instance of Nmap::Scanner::Backend::Results
my $results = $scanner->scan();
# Print the results out as an well-formatted XML document
print $results->as_xml();
# Event scan method using *new* easier way to set scan options.
my $scanner = new Nmap::Scanner;
$scanner->register_scan_started_event(&scan_started);
$scanner->register_port_found_event(&port_found);
$scanner->scan(-sS -p 1-1024 -O --max-rtt-timeout 200 somehost.org.net.it);
sub scan_started {
my $self = shift;
my $host = shift;
my $hostname = $host->name();
my $addresses = join(,, map {$_->address()} $host->addresses());
my $status = $host->status();
print "$hostname ($addresses) is $statusn";
}
sub port_found {
my $self = shift;
my $host = shift;
my $port = shift;
my $name = $host->name();
my $addresses = join(,, map {$_->addr()} $host->addresses());
print "On host $name ($addresses), found ",
$port->state()," port ",
join(/,$port->protocol(),$port->portid()),"n";
}
This set of modules provides perl class wrappers for the network mapper (nmap) scanning tool (see http://www.insecure.org/nmap/). Using these modules, a developer, network administrator, or other techie can create perl routines or classes which can be used to automate and integrate nmap scans elegantly into new and existing perl scripts.
If you dont have nmap installed, you will need to download it BEFORE you can use these modules. Get it from http://www.insecure.org/nmap/. You will need nmap 3.10+ installed to use all the features of this module.
<<lessSYNOPSIS
Perl extension for performing nmap (www.insecure.org/nmap) scans.
use Nmap::Scanner;
# Batch scan method
my $scanner = new Nmap::Scanner;
$scanner->tcp_syn_scan();
$scanner->add_scan_port(1-1024);
$scanner->add_scan_port(8080);
$scanner->guess_os();
$scanner->max_rtt_timeout(200);
$scanner->add_target(some.host.out.there.com.org);
# $results is an instance of Nmap::Scanner::Backend::Results
my $results = $scanner->scan();
# Print the results out as an well-formatted XML document
print $results->as_xml();
# Event scan method using *new* easier way to set scan options.
my $scanner = new Nmap::Scanner;
$scanner->register_scan_started_event(&scan_started);
$scanner->register_port_found_event(&port_found);
$scanner->scan(-sS -p 1-1024 -O --max-rtt-timeout 200 somehost.org.net.it);
sub scan_started {
my $self = shift;
my $host = shift;
my $hostname = $host->name();
my $addresses = join(,, map {$_->address()} $host->addresses());
my $status = $host->status();
print "$hostname ($addresses) is $statusn";
}
sub port_found {
my $self = shift;
my $host = shift;
my $port = shift;
my $name = $host->name();
my $addresses = join(,, map {$_->addr()} $host->addresses());
print "On host $name ($addresses), found ",
$port->state()," port ",
join(/,$port->protocol(),$port->portid()),"n";
}
This set of modules provides perl class wrappers for the network mapper (nmap) scanning tool (see http://www.insecure.org/nmap/). Using these modules, a developer, network administrator, or other techie can create perl routines or classes which can be used to automate and integrate nmap scans elegantly into new and existing perl scripts.
If you dont have nmap installed, you will need to download it BEFORE you can use these modules. Get it from http://www.insecure.org/nmap/. You will need nmap 3.10+ installed to use all the features of this module.
Download (0.066MB)
Added: 2007-04-11 License: Perl Artistic License Price:
943 downloads
OpenHPI SNMP Subagent 2.3.4
Open HPI SNMP Subagent is a Net-SNMP based subagent which exposes the HPI Interface via SNMP. more>>
OpenHPI is an open source project created with the intent of providing an implementation of the SA Forums Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers.
OpenHPI SNMP Subagent project includes resource modeling; access to and control over sensor, control, watchdog, and inventory data associated with resources; abstracted System Event Log interfaces; hardware events and alerts; and a managed hotswap interface.
OpenHPI provides a modular mechanism for adding new hardware and device support easily. Many plugins exist in the OpenHPI source tree to provide access to various types of hardware.
This includes, but is not limited to, IPMI based servers, Blade Center, and machines which export data via sysfs. For up to date status on these components, please check out the status page.
The OpenHPI project is always looking for more participants.
Enhancements:
- MIB files have been updated and are now installed properly.
- Patched to work with OpenHPI 2.6.
<<lessOpenHPI SNMP Subagent project includes resource modeling; access to and control over sensor, control, watchdog, and inventory data associated with resources; abstracted System Event Log interfaces; hardware events and alerts; and a managed hotswap interface.
OpenHPI provides a modular mechanism for adding new hardware and device support easily. Many plugins exist in the OpenHPI source tree to provide access to various types of hardware.
This includes, but is not limited to, IPMI based servers, Blade Center, and machines which export data via sysfs. For up to date status on these components, please check out the status page.
The OpenHPI project is always looking for more participants.
Enhancements:
- MIB files have been updated and are now installed properly.
- Patched to work with OpenHPI 2.6.
Download (0.82MB)
Added: 2006-09-23 License: BSD License Price:
1126 downloads
AntiVirus Scanner 3.2.1
AntiVirus Scanner is an anti-virus scanner for Endeavour Mark II that uses the ClamAV library (libclamav). more>>
AntiVirus Scanner is an anti-virus scanner for Endeavour Mark II that uses the ClamAV library (libclamav).
AntiVirus Scanner allows you to create a list of scan items for frequently scanned locations and features easy virus database updating, all in a simple GUI environment.
<<lessAntiVirus Scanner allows you to create a list of scan items for frequently scanned locations and features easy virus database updating, all in a simple GUI environment.
Download (0.50MB)
Added: 2007-08-02 License: GPL (GNU General Public License) Price:
843 downloads
Bind9 SNMP Subagent 1.7
The Bind9 SNMP Subagent provides indexed BIND 9 statistics via SNMP output. more>>
Bind9 SNMP Subagent provides indexed BIND 9 statistics via SNMP output. Data, query, and graph templates are provided for Cacti.
Enhancements:
- The duplicate %CFG variable (both in the library and script) has been removed.
- This release supports BIND 9 views.
- There are major documentation updates.
<<lessEnhancements:
- The duplicate %CFG variable (both in the library and script) has been removed.
- This release supports BIND 9 views.
- There are major documentation updates.
Download (0.023MB)
Added: 2007-08-23 License: GPL (GNU General Public License) Price:
510 downloads
Parallel Network Scanner 1.11
Parallel Network Scanner provides a fast network services scanner. more>>
Parallel Network Scanner provides a fast network services scanner.
pnscan is a scanner for TCP network services. It uses multithreading to increase its speed.
pnscan tries to be smart as to how many threads to start - it will dynamically start only as many as is needed to make progress in the scan - up to a maximum either as specified with the "-n" command line option, or 8 minus the maximum number of available file descriptors (pnscan tries to increase
it to the max limit automatically) - or any internal limit on the system (Linux normally only allows 256 threads).
Host ranges can be specified both as a CIDR - network name or IP address / mask bit length and as a range. When using CIDR notation - the first and last address is ignored (normally used for broadcasts)
Some examples:
192.168.0.0/24
192.160.0.1:192.160.0.254
arpanet/8
USAGE - EXAMPLES
# Scan network 192.168.0.0/24 for SSH daemons on port 22
pnscan 192.168.0.0/24 22
pnscan 192.168.0.1:192.168.0.254 ssh
# Scan hosts 192.168.10.34 ... 98 for IDENT servers, max 8 threads
pnscan -n8 -w"VERSION" 192.168.10.34:192.168.10.98 113
# Scan host 127.0.0.1 for WWW servers on all ports
pnscan -w"HEAD / HTTP/1.0rnrn" -r"Server:" 192.168.0.32 1:65525
pnscan -w"HEAD / HTTP/1.0rnrn" -r"Server:" localhost 1:65525
# Send binary data and expect the binary sequence FF 00 FF on port 145.
pnscan -W"05 5A 37" -R"FF 00 FF" 192.168.0.32 145
# Scan for Roxen servers and print the whole Server-line
pnscan -l -w"HEAD / HTTP/1.0rnrn" -r"Roxen" localhost 1:65525
# Scan for pidentd servers and try to locate the version
pnscan -w"VERSION" 192.160.0.0/24 113
# Scan network arpanet/24 for daytime servers and sort them IP-numerically
pnscan arpanet/10 daytime | ipsort
# Read host (&port) lines from stdin and scan the selected hosts for SSH
echo 192.160.10.11 ssh | pnscan -v
echo 192.160.10.12 | pnscan 22
Enhancements:
- pnscan.sgml Added the other options implemented in pnscan.c.
- pnscan.c: Modified the threads startup code to dynamically only start as many threads as is needed.
<<lesspnscan is a scanner for TCP network services. It uses multithreading to increase its speed.
pnscan tries to be smart as to how many threads to start - it will dynamically start only as many as is needed to make progress in the scan - up to a maximum either as specified with the "-n" command line option, or 8 minus the maximum number of available file descriptors (pnscan tries to increase
it to the max limit automatically) - or any internal limit on the system (Linux normally only allows 256 threads).
Host ranges can be specified both as a CIDR - network name or IP address / mask bit length and as a range. When using CIDR notation - the first and last address is ignored (normally used for broadcasts)
Some examples:
192.168.0.0/24
192.160.0.1:192.160.0.254
arpanet/8
USAGE - EXAMPLES
# Scan network 192.168.0.0/24 for SSH daemons on port 22
pnscan 192.168.0.0/24 22
pnscan 192.168.0.1:192.168.0.254 ssh
# Scan hosts 192.168.10.34 ... 98 for IDENT servers, max 8 threads
pnscan -n8 -w"VERSION" 192.168.10.34:192.168.10.98 113
# Scan host 127.0.0.1 for WWW servers on all ports
pnscan -w"HEAD / HTTP/1.0rnrn" -r"Server:" 192.168.0.32 1:65525
pnscan -w"HEAD / HTTP/1.0rnrn" -r"Server:" localhost 1:65525
# Send binary data and expect the binary sequence FF 00 FF on port 145.
pnscan -W"05 5A 37" -R"FF 00 FF" 192.168.0.32 145
# Scan for Roxen servers and print the whole Server-line
pnscan -l -w"HEAD / HTTP/1.0rnrn" -r"Roxen" localhost 1:65525
# Scan for pidentd servers and try to locate the version
pnscan -w"VERSION" 192.160.0.0/24 113
# Scan network arpanet/24 for daytime servers and sort them IP-numerically
pnscan arpanet/10 daytime | ipsort
# Read host (&port) lines from stdin and scan the selected hosts for SSH
echo 192.160.10.11 ssh | pnscan -v
echo 192.160.10.12 | pnscan 22
Enhancements:
- pnscan.sgml Added the other options implemented in pnscan.c.
- pnscan.c: Modified the threads startup code to dynamically only start as many threads as is needed.
Download (0.014MB)
Added: 2007-03-12 License: Freeware Price:
958 downloads
Port Scanner 2.1
Port Scanner provides a tool to check for open ports. more>>
Port Scanner provides a tool to check for open ports.
Port Scanner will try to connect on every port you define for a particular host. If a connection is made, it will try to read any data returned.
This product is intended for individuals to test their own equipment for weak security, and the author will take no responsibility if it is put to any other use.
Amazon sell many books on Security that will enhance your ability to keep your computer secure.
The Windows version has been withdrawn. Apologies for this, but it is too popular and uses my bandwidth up too quickly. If anyone want to host the binary for me, I will happily post a link here. It should also be possible to compile Version 2.1 for Windows.
Whats New in this release:
.(QT) Takes multiple port ranges.
.Minor bugfixes.
<<lessPort Scanner will try to connect on every port you define for a particular host. If a connection is made, it will try to read any data returned.
This product is intended for individuals to test their own equipment for weak security, and the author will take no responsibility if it is put to any other use.
Amazon sell many books on Security that will enhance your ability to keep your computer secure.
The Windows version has been withdrawn. Apologies for this, but it is too popular and uses my bandwidth up too quickly. If anyone want to host the binary for me, I will happily post a link here. It should also be possible to compile Version 2.1 for Windows.
Whats New in this release:
.(QT) Takes multiple port ranges.
.Minor bugfixes.
Download (0.013MB)
Added: 2007-02-22 License: GPL (GNU General Public License) Price:
991 downloads
Aegis Virus Scanner 2.0.0
Aegis is a virus scanner for Linux, Unix and Windows with a simple and intuitive user interface. more>>
Aegis project is a virus scanner for Linux, Unix and Windows with a simple and intuitive user interface.
Aegis supports scanning of subdirectories, hidden files and .zip and .tar archive files, and drag-and-drop of files from the Nautilus file browser, or your Gnome desktop. When a virus is detected you can choose to delete, quarantine or rename the file.
<<lessAegis supports scanning of subdirectories, hidden files and .zip and .tar archive files, and drag-and-drop of files from the Nautilus file browser, or your Gnome desktop. When a virus is detected you can choose to delete, quarantine or rename the file.
Download (0.021MB)
Added: 2006-09-20 License: GPL (GNU General Public License) Price:
1134 downloads
Viralator Proxy Virus Scanner 0.9.7
Viralator Proxy Virus Scanner is a Perl script that virus scans HTTP/FTP downloads request on a UNIX server. more>>
Viralator is a Perl script that virus scans HTTP/FTP downloads request on a UNIX server after passing through the Squid proxy server.
Even when I implemented virus protection for my network email server we still continued to get the odd virus. Most of the viruses came from people using free webmail accounts like Hotmail or Yahoo and downloading the infected attachments to their machines or through downloading junk.
Rather than block access to the users I decided to look at how we could better protect the network. I looked at a couple of different products both comercial and free but they were either too expensive or did not meet my needs.
That is how Viralator was born. Viralator Proxy Virus Scanner is licenced under the GPL.
Viralator should work in any UNIX system that uses Apache and Squid servers. We have reports about successful instalations on:
- RedHat Linux
- Mandrake Linux
- SuSe Linux
- e-Smith Linux
- Slackware Linux
- Conectiva Linux
- Debian Gnu Linux
Supported Redirectors:
- Squirm
- SquidGuard
- Jesred
Supported Virus Scanners
- AntiVir
- AVP
- RAV
- Inoculate
- Sophos Sweep
- McAfee
- Trend
- Clamav
- Bit Defender (free edition)
The original concept for Viralator came from the Viromat project. Without Viromat the Viralator project would not have had a starting point. We can also thank Ralph Meyer for badgering me into releasing the script under the GPL.
Enhancements:
- Parenthesis are included on the regular expression used to validate URLs.
- The character set checking step, which was not working before last patch released, has been fixed.
<<lessEven when I implemented virus protection for my network email server we still continued to get the odd virus. Most of the viruses came from people using free webmail accounts like Hotmail or Yahoo and downloading the infected attachments to their machines or through downloading junk.
Rather than block access to the users I decided to look at how we could better protect the network. I looked at a couple of different products both comercial and free but they were either too expensive or did not meet my needs.
That is how Viralator was born. Viralator Proxy Virus Scanner is licenced under the GPL.
Viralator should work in any UNIX system that uses Apache and Squid servers. We have reports about successful instalations on:
- RedHat Linux
- Mandrake Linux
- SuSe Linux
- e-Smith Linux
- Slackware Linux
- Conectiva Linux
- Debian Gnu Linux
Supported Redirectors:
- Squirm
- SquidGuard
- Jesred
Supported Virus Scanners
- AntiVir
- AVP
- RAV
- Inoculate
- Sophos Sweep
- McAfee
- Trend
- Clamav
- Bit Defender (free edition)
The original concept for Viralator came from the Viromat project. Without Viromat the Viralator project would not have had a starting point. We can also thank Ralph Meyer for badgering me into releasing the script under the GPL.
Enhancements:
- Parenthesis are included on the regular expression used to validate URLs.
- The character set checking step, which was not working before last patch released, has been fixed.
Download (0.029MB)
Added: 2006-06-16 License: GPL (GNU General Public License) Price:
1240 downloads
TCP port scanner 1.0.4
TCP port scanner is a network scanner for Linux. more>>
TCP port scanner is a network scanner for Linux.
Installation:
1. Install - become root and gunzip/tar tcpscan-X-Y-Z.tar.gz.
2. Type ./confugure , make
3. Type install
4. Enjoy and try type tcpscan localhost
5. To get help - run tcpscan without parametres.
Usage:
tcpscan [-f] [hostname || IP_address]
tcpscan [-f] [first_IP_address] [last_IP_address]
<<lessInstallation:
1. Install - become root and gunzip/tar tcpscan-X-Y-Z.tar.gz.
2. Type ./confugure , make
3. Type install
4. Enjoy and try type tcpscan localhost
5. To get help - run tcpscan without parametres.
Usage:
tcpscan [-f] [hostname || IP_address]
tcpscan [-f] [first_IP_address] [last_IP_address]
Download (0.060MB)
Added: 2006-04-14 License: GPL (GNU General Public License) Price:
1299 downloads
Net-SNMP 5.4.1
Net-SNMP provides tools and libraries relating to the Simple Network Management Protocol. more>>
Net-SNMP project provides tools and libraries relating to the Simple Network Management Protocol.
Installation:
The `configure shell script attempts to guess correct values for various system-dependent variables used during compilation.
It uses those values to create a `Makefile in each directory of the package. It may also create one or more `.h files containing system-dependent definitions.
Finally, it creates a shell script `config.status that you can run in the future to recreate the current configuration, a file `config.cache that saves the results of its tests to speed up
reconfiguring, and a file `config.log containing compiler output (useful mainly for debugging `configure).
If you need to do unusual things to compile the package, please try to figure out how `configure could check whether to do them, and mail diffs or instructions to the address given in the `README so they can be considered for the next release.
If at some point `config.cache contains results you dont want to keep, you may remove or edit it.
The file `configure.in is used to create `configure by a program called `autoconf. You only need `configure.in if you want to change it or regenerate `configure using a newer version of `autoconf.
The simplest way to compile this package is:
1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system.
If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute
`configure itself.
Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.
2. Type `make to compile the package.
3. Optionally, type `make check to run any self-tests that come with the package.
4. Type `make install to install the programs and any data files and documentation.
5. You can remove the program binaries and object files from the source code directory by typing `make clean. To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean.
There is also a `make maintainer-clean target, but that is intended mainly for the packages developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
Whats New in This Release:
snmplib:
- [BUG 1619827]: link libraries against needed external libraries
- [PATCH 1616912]: fix memory leak in UDP transport code
- [PATCH 1592706]: fix memory leak when cloning varbinds
- Change snmp_sess_add_ex to consistently close and delete the
transport argument on failure, earlier the liveness of the
transport argument was undecided.
snmpd:
- [BUG 1558823]: fix ipAddressTable memory leak
- [BUG 1596638]: fix memory leak in ipCidrRouteTable, inetCidrRouteTable
- [BUG 1611524]: fix tcp connection table file descriptor leak
- handle row deletion issues in dataset tables
- [BUG 1712988]: default and configurable maximum number of
varbinds returnable to a GETBULK request.
- [PATCH 1666737]: include ipv6 counts in
udpInDatagrams, udpNoPorts, udpInErrors, udpOutDatagrams
- [PATCH 1700157]: fixes ordering of exec tokens in the resulting mib tree
- [PATCH 1719253]: fix skipNFSInHostResources so it does not break on the
second walk of the table.
perl:
- link Perl modules against the exact set of libraries needed
- [BUG 1619827]: properly link against libperl when configured with
--enable-as-needed
- [PATCH 1725049]: fix bulkwalk in cases of non-repeater
build:
- update to libtool 1.5.24 (from 1.5.22)
python:
- [PATCH 1716114]: Let python build in the Net-SNMP source tree
MacOSX:
- [PATCH 1600522]: CPU Hardware Abstraction Layer (HAL)
implementation for mach/darwin
- IF-MIB rewrite now enabled by default
Win32:
- fix AES support
- [PATCH 1706344]: fix compilation with cygwin
IRIX:
- [PATCH 1709748]: Optimized IRIX cpu stats
AIX:
- Fix default shared library building instead of forcing static use
FreeBSD:
- [BUG 1633483]: Support CPU HAL on FreeBSD4.x
<<lessInstallation:
The `configure shell script attempts to guess correct values for various system-dependent variables used during compilation.
It uses those values to create a `Makefile in each directory of the package. It may also create one or more `.h files containing system-dependent definitions.
Finally, it creates a shell script `config.status that you can run in the future to recreate the current configuration, a file `config.cache that saves the results of its tests to speed up
reconfiguring, and a file `config.log containing compiler output (useful mainly for debugging `configure).
If you need to do unusual things to compile the package, please try to figure out how `configure could check whether to do them, and mail diffs or instructions to the address given in the `README so they can be considered for the next release.
If at some point `config.cache contains results you dont want to keep, you may remove or edit it.
The file `configure.in is used to create `configure by a program called `autoconf. You only need `configure.in if you want to change it or regenerate `configure using a newer version of `autoconf.
The simplest way to compile this package is:
1. `cd to the directory containing the packages source code and type `./configure to configure the package for your system.
If youre using `csh on an old version of System V, you might need to type `sh ./configure instead to prevent `csh from trying to execute
`configure itself.
Running `configure takes awhile. While running, it prints some messages telling which features it is checking for.
2. Type `make to compile the package.
3. Optionally, type `make check to run any self-tests that come with the package.
4. Type `make install to install the programs and any data files and documentation.
5. You can remove the program binaries and object files from the source code directory by typing `make clean. To also remove the files that `configure created (so you can compile the package for a different kind of computer), type `make distclean.
There is also a `make maintainer-clean target, but that is intended mainly for the packages developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
Whats New in This Release:
snmplib:
- [BUG 1619827]: link libraries against needed external libraries
- [PATCH 1616912]: fix memory leak in UDP transport code
- [PATCH 1592706]: fix memory leak when cloning varbinds
- Change snmp_sess_add_ex to consistently close and delete the
transport argument on failure, earlier the liveness of the
transport argument was undecided.
snmpd:
- [BUG 1558823]: fix ipAddressTable memory leak
- [BUG 1596638]: fix memory leak in ipCidrRouteTable, inetCidrRouteTable
- [BUG 1611524]: fix tcp connection table file descriptor leak
- handle row deletion issues in dataset tables
- [BUG 1712988]: default and configurable maximum number of
varbinds returnable to a GETBULK request.
- [PATCH 1666737]: include ipv6 counts in
udpInDatagrams, udpNoPorts, udpInErrors, udpOutDatagrams
- [PATCH 1700157]: fixes ordering of exec tokens in the resulting mib tree
- [PATCH 1719253]: fix skipNFSInHostResources so it does not break on the
second walk of the table.
perl:
- link Perl modules against the exact set of libraries needed
- [BUG 1619827]: properly link against libperl when configured with
--enable-as-needed
- [PATCH 1725049]: fix bulkwalk in cases of non-repeater
build:
- update to libtool 1.5.24 (from 1.5.22)
python:
- [PATCH 1716114]: Let python build in the Net-SNMP source tree
MacOSX:
- [PATCH 1600522]: CPU Hardware Abstraction Layer (HAL)
implementation for mach/darwin
- IF-MIB rewrite now enabled by default
Win32:
- fix AES support
- [PATCH 1706344]: fix compilation with cygwin
IRIX:
- [PATCH 1709748]: Optimized IRIX cpu stats
AIX:
- Fix default shared library building instead of forcing static use
FreeBSD:
- [BUG 1633483]: Support CPU HAL on FreeBSD4.x
Download (3.81MB)
Added: 2007-07-27 License: GPL (GNU General Public License) Price:
849 downloads
Westhawks Java SNMP stack 5.0
Westhawk SNMP is a lightweight SNMP stack in Java, with Java applet, application, and servlet examples. more>>
Westhawk SNMP is a lightweight SNMP stack in Java, with Java applet, application, and servlet examples.
The stack provides manager functionality for SNMPv1, SNMPv2c, and SNMPv3 (authentication and privacy).
Westhawks Java SNMP stack is capable of sending and receiving PDUs, but has limited agent functionality. The stack supports IPv6.
Enhancements:
- The stack is able to listen for incoming requests (and no longer for traps only).
- The stack is able to listen on multiple ports for requests and traps.
- Contexts (incoming and outgoing) can be bound to a local bind address.
- A separate package stubBrowser4_14.zip that contains a new and experimantal Stub Browser was released.
- Support for DateAndTime text convention was added to AsnOctets.
- A MultiSourcePdu that can do broadcast requests was added.
- Built-in support for IPv6 was added.
- Built-in support for "Reliable SNMP" was added.
<<lessThe stack provides manager functionality for SNMPv1, SNMPv2c, and SNMPv3 (authentication and privacy).
Westhawks Java SNMP stack is capable of sending and receiving PDUs, but has limited agent functionality. The stack supports IPv6.
Enhancements:
- The stack is able to listen for incoming requests (and no longer for traps only).
- The stack is able to listen on multiple ports for requests and traps.
- Contexts (incoming and outgoing) can be bound to a local bind address.
- A separate package stubBrowser4_14.zip that contains a new and experimantal Stub Browser was released.
- Support for DateAndTime text convention was added to AsnOctets.
- A MultiSourcePdu that can do broadcast requests was added.
- Built-in support for IPv6 was added.
- Built-in support for "Reliable SNMP" was added.
Download (1.9MB)
Added: 2006-03-29 License: Freeware Price:
1310 downloads
Package SNMP Subagent 1.0
Package SNMP Subagent provides indexed package information via SNMP output. more>>
Package SNMP Subagent provides indexed package information via SNMP output.
The Simple Network Management Protocol (SNMP) forms part of the internet protocol suite as defined by the Internet Engineering Task Force.
The protocol can support monitoring of network-attached devices for any conditions that warrant administrative attention.
The SNMP protocol is extensible by design. This is achieved through the notion of a management information base or MIB, which specifies the management data of a specific subsystem of an SNMP-enabled device, using a hierarchical namespace containing object identifiers, implemented via ASN.1.
The MIB hierarchy can be depicted as a tree with a nameless root, the levels of which are assigned by different organizations. This model permits management across all layers of the OSI reference model, extending into applications such as databases, email, and the J2EE reference model, as MIBs can be defined for all such area-specific information and operations
<<lessThe Simple Network Management Protocol (SNMP) forms part of the internet protocol suite as defined by the Internet Engineering Task Force.
The protocol can support monitoring of network-attached devices for any conditions that warrant administrative attention.
The SNMP protocol is extensible by design. This is achieved through the notion of a management information base or MIB, which specifies the management data of a specific subsystem of an SNMP-enabled device, using a hierarchical namespace containing object identifiers, implemented via ASN.1.
The MIB hierarchy can be depicted as a tree with a nameless root, the levels of which are assigned by different organizations. This model permits management across all layers of the OSI reference model, extending into applications such as databases, email, and the J2EE reference model, as MIBs can be defined for all such area-specific information and operations
Download (0.014MB)
Added: 2006-02-07 License: GPL (GNU General Public License) Price:
1359 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above onesixtyone snmp scanner search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
