Free not found software for linux

Not A Commander is yet another file manager modeled after the Norton Commander. Good integration with the command line is the primary goal.
This project is using the technology of Natural Stupidity for development: first get something working at all, then gradually improve it. My primary targets are the features that I personally would use. The features that I wont use anyway are not planned to be implemented at all (though if someone would contribute an implementation I would gladly accept it - as long as it does not break any of the things that I use).
Build
Run `make. That should build all the binary parts. The X11 headers are required for build. You may need to modify the Makefile for peculiarities of your particular system (directory names, libraries etc.).
Installation
Run `make install. By default the `nac binary is instaled into /usr/local/bin and the rest of files is installed into /usr/local/lib/nac (which is referred further as "the NAC directory").
These directory names can be changed in the Makefile. If the configuration file nac.sysrc was present in the NAC directory before installation, it will be moved into nac.sysrc.old.
Configuration
The default configuration of NAC can be changed with rc files. There are two rc files:
per system - nac.sysrc in the NAC directory per user - .nacrc in the users home directory
These files are common Tcl scripts that can be used to change the tunable values. NAC first sets the built-in values, then loads the system-wide rc file (if present), then loads the users rc file (if present). Thus the system-wide script can examine the built-in values and modify them was neccessary, and the users script can do the same thing with the result
of the system-wide script.
Be careful with the syntax, in case of an error in the rc scripts NAC wont start.
The list of the supported tunables and their values can be found at the top of tune.tcl. For now (the alpha phase of development) its expected to be quite liquid and change between snapshot releases. Probably some sort of versioning will be added after it stabilizes.
The sample system rc file included in a release contains only one setting - the name of font to use (most probably you dont have the font "koi9x16" which is the built-in default).
The default initial size of the window is defined by panel dimensions, variables named set panel:filespercolumn (number of rows in panels), panel:ncolumns (number of columns in panels), panel:columnwidth (width of a column in dots). The internal xterm is automatically resized to fit these dimensions. Alternative size in pixels or xterm characters can be
selected with command line options.
Enhancements:
- Various bugs were fixed and workarounds were included for bugs in glibc and Tk.

Darkbot is a very fast and small program written in C language which connects to IRC from an Unix or Windows operating system and automatically "talks" and responds to users questions.
Originally created by Jason Hamilton as an aid for help channels to answer repeated questions from its virtually unlimited database, it has became a very popular talking robot in a generic sense, being used all over IRC networks for different purposes and in 18 languages.
THe dfata can be dynamically added and changed but also can be changed offline, working in its database.
An extensive but easy-to-understand list of commands and features, including some channel operation functions and levels of protection, makes Darkbot a very flexible but somehow powerful and complex robot, with almost human conversations and reactions.
Enhancements:
- Removed an unneeded line in main.c, that was used to "hide" warnings on WIN32, which is a very bad idea.
- Changed check_dbtimers() so it ignores the CVS directory, which contains information for the CVS server. This fixes a situation that seems to have only presented itself in FreeBSD, where it thinks the CVS directory is a timer, and sends out random garble every few seconds.
- configure.ac and source/Makefile.am; very minor updates.
- Fixed randq, which I accidentally broke when adding the
- I switch. This also fixes some problems that turned upon FreeBSD.
- Fixed a warning that came up in permbans.c about mixing types when compiling on OS X. I changed %d on line 198 to %ud.
- configure now checks for clock_t.
- configure now automatically checks for snprintf, and uses a replacement if its not found.
- docs/INSTALL.txt is now INSTALL in the toplevel dir.
- Another thing for automake to stop complaining about.
- The original configure script is now located in the scripts directory, and is called "Setup".
- docs/contributors.txt is now called AUTHORS in the top level of the distribution. Another thing automake complains about. I also worked on the appearance of this file, hopefully it looks a little better now.
- README.txt in the toplevel is now called "README". Automake complains about this file also, if its not found.
- This file is now called ChangeLog, and has been moved to the toplevel distribution dir. The reason for this is that automake complains, if it cant find this file.
- configure now checks for the presence of windows.h, and defines WIN32, if its found. This removes the need to do "make win". Until I add the noconsole option again, you can run darkbot with no console by doing "./darkbot &" in your cygwin shell.
- The configure.ac file is not yet complete, and most of the definitions listed in config.h are not completely implemented into the code yet. If you have problems, please let me know, and these files will become completely implemented as demand is met.
- Included premade Makefiles and configure script.
- Added "make convertdb", which will compile the database conversion utility, which encrypts the passwords in your userlist.db file.
- I added a Makefile.am in the toplevel, and in the source directory. These files are used in conjunction with GNU Automake to produce a Makefile.
- Added Makefile.ams and configure.ac for autoconf/automake.

Nikto is an Open Source web server scanner which performs comprehensive tests against web servers for multiple items, including over 3200 potentially dangerous CGIs/files, versions on over 625 servers, and version specific problems on over 230 servers. Scan items and plugins are frequently updated and can be automatically updated (if desired).
Nikto is not designed as an overly stealthy tool. It will test a web server in the shortest timespan possible, and its fairly obvious in log files. However, there is support for LibWhiskers anti-IDS methods in case you want to give it a try (or test your IDS system).
Not every check is a security problem, though most are. There are some items that are "info only" type checks that look for items that may not have a security flaw, but the webmaster or security engineer may not know are present on the server. These items are usually marked appropriately in the information printed. There are also some checks for unknown items which have been seen scanned for in log files.
Main features:
- Uses rfps LibWhisker as a base for all network funtionality
- Main scan database in CSV format for easy updates
- Determines "OK" vs "NOT FOUND" responses for each server, if possible
- Determines CGI directories for each server, if possible
- Switch HTTP versions as needed so that the server understands requests properly
- SSL Support (Unix with OpenSSL or maybe Windows with ActiveStates Perl/NetSSL)
- Output to file in plain text, HTML or CSV
- Generic and "server type" specific checks
- Plugin support (standard PERL)
- Checks for outdated server software
- Proxy support (with authentication)
- Host authentication (Basic)
- Watches for "bogus" OK responses
- Attempts to perform educated guesses for Authentication realms
- Captures/prints any Cookies received
- Mutate mode to "go fishing" on web servers for odd items
- Builds Mutate checks based on robots.txt entries (if present)
- Scan multiple ports on a target to find web servers (can integrate nmap for speed, if available)
- Multiple IDS evasion techniques
- Users can add a custom scan database
- Supports automatic code/check updates (with web access)
- Multiple host/port scanning (scan list files)
- Username guessing plugin via the cgiwrap program and Apache ~user methods
Enhancements:
- Added -config option to specify a config file (from Pavel Kankovsky)
- Added enhanced content checking to reduce false positives (from Pavel Kankovsky)
- Added more explicit licensing to code/databases

LINGOT is a musical instrument tuner. LINGOT is easy to use, accurate, and highly configurable. Originally conceived to tune electric guitars, its configurability gives it a more general character. (Tuning another instruments has not been tested).
It looks like an analogic tuner, with a gauge indicating the relative shift to a certain note --found automatically as the closest note to the estimated frequency--, indicating that note and its frequency.
The note will be found automatically, since the program hasnt any manual function mode (indicating the note to tune manually), for mantaining its general purpose.
We recommend using the tuner in conjunction with a sound mixer for selecting the desired recording source and the signal recording levels.
Main features:
- Accurate.
- Easy to use. Just plug in your instrument and run tuner.
- Very configurable via GUI. Its possible to change any parameter while the program is running, without editing any file.
- It works in an automatic way. It isnt necessary specify the note to tune; the program guesses it.
- Its free software. It has GPL license.
- Tuning other instruments than guitars is possible. Since this program guesses the note you are playing, it can be used to tune a piano, a bass, a violin, etc.
Enhancements:
- Files have been reorganized to a more "GNU-like" structure.
- Multi-lingual support has been added.

No Brainer SMTPNo Brainer SMTP provides a config-free simple SMTP sender.
No Brainer SMTP (nbSMTP) is a simple SMTP client suitable to run in chroot jails, in embedded systems, laptops, or workstations.
No Brainer SMTP major features:
- Fix some error handling problems.
- Added smtp_last_message() to improve verbosity in case of errors.
- Uses strtok if strsep is not found.
- Added OSX module, refer to README.OSX in tarball.
- Fix memory leaks when using a combination of rc files and command line options.
- Respond to nbsmtp --help nbsmtp -h and nbsmtp --version with the expected behavior.
- Improve sending big mails or mails with attachments.
Main features:
- SSL/TLS and STARTTLS support
- SYSLOG logging support (using LOG_MAIL facility)
- SASL (LOGIN, PLAIN and CRAMMD5) support
- IPv6 support
- Configuration file support
- Sendmail compatibility
- Queue supportSSL/TLS and STARTTLS support
- SYSLOG logging support (using LOG_MAIL facility)
- SASL (LOGIN, PLAIN and CRAMMD5) support
- IPv6 support
- Configuration file support
- Sendmail compatibility
- Queue support

Include is a Perl module that allow you to use #defines from C header files.

SYNOPSIS

use Include qw(-I /some/path/of/mine);
use Include q< sys/types.h >;
use Include q< sys/types.h > "/[A-Z]/";

The Include module implements a method of using #define constants from C header files. It does this by putting an extra level of indirection on the use operator.

To enhance performance a cache scheme is used. When a new module is required the cache is checked first, if the package is not found then it will be generated from the C header files.

Include can be configured to place any generated packages into the cache automatically, for security reasons this is turned off by default.

There are three ways in which the use Include statement can be used.

use Include qw(-I /some/path/of/mine);

Will unshift the directory /some/path/of/mine onto the search path used so that subsequent searches for .h header files will search the given directories first.

use Include q< sys/types.h >;
use Include q< sys/types.h > "/[A-Z]/";

Both of these will define all the constants found in and any header files included by it. The first will export all of these into the calling package, but the second will only export defined macros that contain an unppercase character.

Subroutines

Under normal use the Include package is only used via the use/import interface. But there are some routines that are defined.

CacheOn

This subroutine will cause the Include module to save any generated packages into the cache.

Generate( @headers )

This subroutine will force the generation of the given header files, and any files included in them, reguardless of whether they are currently in the cache. If cache writing is turned on then the cache files will be overwritten.

Search( @dirs )

This subroutine will unshift the given directories onto the search path used for locating the header files.

NXscript is a collection of Python scripts for XChat, the popular IRC client. NXscript suite offer some features not found in XChat by default.

These features are meant to make communicating with your friends on IRC easier and more comfortable. In a way, this script is similiar to what NNscript is for mIRC.

Its features include an away notifier, ban protection, a BMPx announcer, a clone scanner, an IRC status reporter, a name finder, a Rhythmbox announcer, a slap script, and an XQF announcer.