newerth sep 2
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 6446
QGolf sep 2001
QGolf is a project that simulates the transmission of a signal on a rope. more>>
QGolf is a project that simulates the transmission of a signal on a rope.
QGolf was developed for radio amateurs to clarify the behaviour of a signal on an antenna.
It demonstrates the forces that act on a rope if you move one end of it: you can see how waves are reflected, how resonance occurs, and how multiple pulses coexist on the same rope.
Various parameters can be updated during the simulation.
<<lessQGolf was developed for radio amateurs to clarify the behaviour of a signal on an antenna.
It demonstrates the forces that act on a rope if you move one end of it: you can see how waves are reflected, how resonance occurs, and how multiple pulses coexist on the same rope.
Various parameters can be updated during the simulation.
Download (0.011MB)
Added: 2006-10-31 License: Free For Educational Use Price:
1088 downloads
Esprit 2.2
Esprit project is a Web-based learning management system, with an emphasis on collaborative work and strong pedagogical scenario more>>
Esprit project is a Web-based learning management system, with an emphasis on collaborative work and strong pedagogical scenario.
<<less Download (1.9MB)
Added: 2007-03-26 License: GPL (GNU General Public License) Price:
943 downloads
Mbedthis AppWeb 2.2.2
Mbedthis AppWeb is the leading web server technology for embedding in devices and applications. more>>
Mbedthis AppWeb is the leading web server technology for embedding in devices and applications. It is an open source, feature rich, embedded web server that has been designed from the ground up with security in mind.
It is integrated directly into embedded systems and applications for simple and convenient deployment and with features such as server side Embedded JavaScript and Embedded Server Pages, AppWeb is in a league of its own when compared with other embedded web servers.
AppWeb is also highly efficient. It has a modular architecture that results in a very small memory footprint and minimal CPU requirements. Compared to other web servers, AppWeb consumes a fraction of the resources that other servers require.
It also offers superior security and provides the easiest way to create dynamic, web based user and management interfaces.
Top Uses for AppWeb
- Embedded Device Management
- Personal Web Servers
- Web enabling Enterprise Applications
- Create a CD of your web site including a local web server
- Diagnostic web based user interfaces for Applications
- Create offline web applications
Enhancements:
- This release migrates the development release to a stable designation.
- Major features over the previous 2.0.5 stable release include: upgraded support for the latest PHP, MatrixSSL, and OpenSSL; a native Debian/Ubuntu package; and FSH conformance.
- Builds have been optimized to be twice as fast. 64-bit support has been improved. configure is more flexible.
- There are fixes for ranged requests, single threaded operation, and putHandler.
- The build system has been reworked.
<<lessIt is integrated directly into embedded systems and applications for simple and convenient deployment and with features such as server side Embedded JavaScript and Embedded Server Pages, AppWeb is in a league of its own when compared with other embedded web servers.
AppWeb is also highly efficient. It has a modular architecture that results in a very small memory footprint and minimal CPU requirements. Compared to other web servers, AppWeb consumes a fraction of the resources that other servers require.
It also offers superior security and provides the easiest way to create dynamic, web based user and management interfaces.
Top Uses for AppWeb
- Embedded Device Management
- Personal Web Servers
- Web enabling Enterprise Applications
- Create a CD of your web site including a local web server
- Diagnostic web based user interfaces for Applications
- Create offline web applications
Enhancements:
- This release migrates the development release to a stable designation.
- Major features over the previous 2.0.5 stable release include: upgraded support for the latest PHP, MatrixSSL, and OpenSSL; a native Debian/Ubuntu package; and FSH conformance.
- Builds have been optimized to be twice as fast. 64-bit support has been improved. configure is more flexible.
- There are fixes for ranged requests, single threaded operation, and putHandler.
- The build system has been reworked.
Download (4.8MB)
Added: 2007-05-25 License: Other/Proprietary License with Source Price:
889 downloads
nbench 2.2.2
nbench is a byte CPU benchmark. more>>
The benchmark program takes less than 10 minutes to run (on most machines) and compares the system it is run on to two benchmark systems (a Dell Pentium 90 with 256 KB cache running MSDOS and an AMD K6/233 with 512 KB cache running Linux).
The archive contains the complete source, documentation, and a binary (Linux elf). The source has been successfully compiled on various operating systems, including SunOS, DEC Unix 4.0, DEC OSF1, HP-UX, DEC Ultrix, MS-DOS, and of course Linux.
This release is based on the Unix port of beta release 2 of BYTE Magazines BYTEmark benchmark program (previously known as BYTEs Native Mode Benchmarks). The port to Linux/Unix was done by Uwe F. Mayer.
Additional changes to the code were made to make the code work with egcs compiler and to make the software packagable. This is a CPU benchmark providing indexes for integer, floating, and memory performance. It is single-threaded and is not designed to measure the performance gain on multi-processor machines.
Running a "make" will create the binary if all goes well. It is called "nbench" and performs a suite of 10 tests and compares the results to a Dell Pentium 90 with 16 MB RAM and 256 KB L2 cache running MSDOS and compiling with the Watcom 10.0 C/C++ compiler.
If you define -DLINUX during compilation (the default) then you also get a comparison to an AMD K6/233 with 32 MB RAM and 512 KB L2-cache running Linux 2.0.32 and using a binary which was compiled with GNU gcc version 2.7.2.3 and GNU libc-5.4.38.
The algorithms were not changed from the source which was obtained from the BYTE web site at http://www.byte.com/bmark/bmark.htm on December 14, 1996. However, the source was modified to better work with 64-bit machines (in particular the random number generator was modified to always work with 32 bit, no matter what kind of hardware you run it on).
Furthermore, for some of the algorithms additional resettings of the data was added to increase the consistency across different hardware. Some extra debugging code was added, which has no impact on normal runs.
In case there is uneven system load due to other processes while this benchmark suite executes, it might take longer to run than on an unloaded system.
This is because the benchmark does some statistical analysis to make sure that the reported results are statistically significant, and an increased variation in individual runs requires more runs to achieve the required statistical confidence.
This is a single-threaded benchmark and is not designed to measure the performance gain on multi-processor machines.
<<lessThe archive contains the complete source, documentation, and a binary (Linux elf). The source has been successfully compiled on various operating systems, including SunOS, DEC Unix 4.0, DEC OSF1, HP-UX, DEC Ultrix, MS-DOS, and of course Linux.
This release is based on the Unix port of beta release 2 of BYTE Magazines BYTEmark benchmark program (previously known as BYTEs Native Mode Benchmarks). The port to Linux/Unix was done by Uwe F. Mayer.
Additional changes to the code were made to make the code work with egcs compiler and to make the software packagable. This is a CPU benchmark providing indexes for integer, floating, and memory performance. It is single-threaded and is not designed to measure the performance gain on multi-processor machines.
Running a "make" will create the binary if all goes well. It is called "nbench" and performs a suite of 10 tests and compares the results to a Dell Pentium 90 with 16 MB RAM and 256 KB L2 cache running MSDOS and compiling with the Watcom 10.0 C/C++ compiler.
If you define -DLINUX during compilation (the default) then you also get a comparison to an AMD K6/233 with 32 MB RAM and 512 KB L2-cache running Linux 2.0.32 and using a binary which was compiled with GNU gcc version 2.7.2.3 and GNU libc-5.4.38.
The algorithms were not changed from the source which was obtained from the BYTE web site at http://www.byte.com/bmark/bmark.htm on December 14, 1996. However, the source was modified to better work with 64-bit machines (in particular the random number generator was modified to always work with 32 bit, no matter what kind of hardware you run it on).
Furthermore, for some of the algorithms additional resettings of the data was added to increase the consistency across different hardware. Some extra debugging code was added, which has no impact on normal runs.
In case there is uneven system load due to other processes while this benchmark suite executes, it might take longer to run than on an unloaded system.
This is because the benchmark does some statistical analysis to make sure that the reported results are statistically significant, and an increased variation in individual runs requires more runs to achieve the required statistical confidence.
This is a single-threaded benchmark and is not designed to measure the performance gain on multi-processor machines.
Download (0.10MB)
Added: 2005-04-12 License: Freely Distributable Price:
927 downloads
Savage: The Battle for Newerth 2.00e
Savage: The Battle for Newerth SEP 2 for Linux is a patch for Savage game. more>>
Savage: The Battle for Newerth SEP 2 for Linux is a patch for Savage game.
Serverside Demos, with the possibility of multiple players watching the same replay on the same replay server at the same time!
Fixed ALL known bugs and exploits, including tons of non-public ones. Even more so than in the original SEP-2 release.
Improved clientside performance and loading speed, up to 25-50% each, depending on your configuration.
Lower pings, especially so on SEP-2 servers (only when on the field, to minimize bandwidth costs)
Enhancements:
- highly optimized rewritten network code
- two new Healer class units
- two new structures
- all new weapons effects
- new items
- new maps
- engine enhancements which increase frame rate by up to 40% on many computer systems
- numerous bug/exploit fixes
- new gameplay and balance tweaks
- introduces Demo Recording
<<lessServerside Demos, with the possibility of multiple players watching the same replay on the same replay server at the same time!
Fixed ALL known bugs and exploits, including tons of non-public ones. Even more so than in the original SEP-2 release.
Improved clientside performance and loading speed, up to 25-50% each, depending on your configuration.
Lower pings, especially so on SEP-2 servers (only when on the field, to minimize bandwidth costs)
Enhancements:
- highly optimized rewritten network code
- two new Healer class units
- two new structures
- all new weapons effects
- new items
- new maps
- engine enhancements which increase frame rate by up to 40% on many computer systems
- numerous bug/exploit fixes
- new gameplay and balance tweaks
- introduces Demo Recording
Download (315.4MB)
Added: 2006-09-19 License: Freeware Price:
2614 downloads
SilverStripe 2.0.2
SilverStripe is a Web application framework and content management system. more>> <<less
Download (1.2MB)
Added: 2007-07-27 License: BSD License Price:
824 downloads
GnoTime 2.2.2
GnoTime provides a to-do list organizer and project timer. more>>
GnoTime provides a to-do list organizer and project timer.
GnoTime is a to-do list tracker and project timer with a built-in invoice generator. It allows users to keep track of how much time they have spent working on particular tasks, maintain a diary of that work, and create invoices with task-specific billing fees and rates.
Main features:
- Multiple To-Do Lists that can be sorted by the priority/importance of the tasks in the list. The to-do items can be organized into categories, arranged in a hierarchical way. This makes it easy to maintain both business and personal items in the list, or handle many different projects, while keeping them separate from each other.
- A pair of Diary/Journal areas that can be used to keep long and detailed notes and diary entries. The project description area allows a multi-paragraph description or status to be typed in. The diary area allows day-to-day notes to be associated with a set of timestamps, so that one has a record of what one did on any given day.
- A Running Timer, with time totals, for each project/task. One starts the timer by clicking on a task: it will measure the amount of time that you are in front of the computer. If it detects that the keyboard/mouse are idle, it will stop the clock. If the clock stays stopped too long, it will nag you to start it up again. You can view time totals by day, week, month or year.
- A Billing Status dialog for each diary entry. You can mark any given diary entry as bill-able/non-bill-able, paid or pending, and set the billing rate. Each project can also be marked up with a set of project-planning information: planed start, end and due dates, hours to finish, percent-complete. This is in addition to assigning an urgency/importance to each project, as well as a status (completed/in-progress not-started/canceled).
- A half-dozen different HTML Reports that can slice and dice your lists. Theres a Journal report that shows all of the diary entries for one given project. Theres an Invoice report that summarizes the time spent on each entry, and computes a dollar amount for it. Theres a Status Report that prints the title of each project, together with the paragraph-long descriptions of each. Theres a ToDo report, which prints only the project title, the importance/urgency, and the completed/in-progress/not-started status. The Daily report summarizes the total time spent on a day-by-day basis, and lists each of the projects that were worked on in a given day. Each of these reports can be customized. And, because theyre HTML, you can even publish them as web pages. (Yes, Ive thought of using GnoTime as a weblog management/publishing tool).
Enhancements:
- Build against QOF version 0.6.0, if available.
- Fix issue where yelp doesnt display an entry for gnotime when browsing because it doesnt recognize the entry
- Fix sourceforge bug [ 799077 ] projects blanked when first time user tries to sort
- fix broken leap-year calculation, leading to bugs sourceforge bugs [ 983408 ] and [ 1114205 ]
- Fix crash due to hoverhelp timer popping after a report window is closed.
- Change activity report to display date/time in two distinct html table columns (prettier alignment)
- Bug fix: sourceforge bug report fixed [ 877193 ] toolbar wont go to/stay in text-only mode
- Bug fix: editing time brings up wrong report
- fedora .spec file is out of date and rpm cannot build rpm
- Fix bug involving copy of old gnotime files to a new machine on which gnotime has never been run before.
- Fix sourceforge bug [ 1276458 ] "Empty" appears in diary entry
- Apply sourceforge patch 1176719 Extensible fix for gtkhtml3 building
- Apply 1171394 Adds separate timeout for "No Project" dialog
- Apply sourceforge patch 085911 Add "-" value for status field
- Apply sourceforge patch 074658 Add wordwrapping to diary entry boxes
- Apply sourceforge patch 1074458 Fix a crash when invoking help
- Apply sourceforge patch 1038701 Fix to Activity item in popup menu
- Apply sourceforge patch 1027582 Build system update for qof inclusion
- Fix idle time so that it works with Linux 2.6 kernel /proc/interrupts
- use %e to see the estimated sizing of a project in the logfiles
- Apply new pt_BR translation from Goedson Teixeira Paixao
- Fix for Debian Bug #250776, change widget visibility in the edit interval dialog
<<lessGnoTime is a to-do list tracker and project timer with a built-in invoice generator. It allows users to keep track of how much time they have spent working on particular tasks, maintain a diary of that work, and create invoices with task-specific billing fees and rates.
Main features:
- Multiple To-Do Lists that can be sorted by the priority/importance of the tasks in the list. The to-do items can be organized into categories, arranged in a hierarchical way. This makes it easy to maintain both business and personal items in the list, or handle many different projects, while keeping them separate from each other.
- A pair of Diary/Journal areas that can be used to keep long and detailed notes and diary entries. The project description area allows a multi-paragraph description or status to be typed in. The diary area allows day-to-day notes to be associated with a set of timestamps, so that one has a record of what one did on any given day.
- A Running Timer, with time totals, for each project/task. One starts the timer by clicking on a task: it will measure the amount of time that you are in front of the computer. If it detects that the keyboard/mouse are idle, it will stop the clock. If the clock stays stopped too long, it will nag you to start it up again. You can view time totals by day, week, month or year.
- A Billing Status dialog for each diary entry. You can mark any given diary entry as bill-able/non-bill-able, paid or pending, and set the billing rate. Each project can also be marked up with a set of project-planning information: planed start, end and due dates, hours to finish, percent-complete. This is in addition to assigning an urgency/importance to each project, as well as a status (completed/in-progress not-started/canceled).
- A half-dozen different HTML Reports that can slice and dice your lists. Theres a Journal report that shows all of the diary entries for one given project. Theres an Invoice report that summarizes the time spent on each entry, and computes a dollar amount for it. Theres a Status Report that prints the title of each project, together with the paragraph-long descriptions of each. Theres a ToDo report, which prints only the project title, the importance/urgency, and the completed/in-progress/not-started status. The Daily report summarizes the total time spent on a day-by-day basis, and lists each of the projects that were worked on in a given day. Each of these reports can be customized. And, because theyre HTML, you can even publish them as web pages. (Yes, Ive thought of using GnoTime as a weblog management/publishing tool).
Enhancements:
- Build against QOF version 0.6.0, if available.
- Fix issue where yelp doesnt display an entry for gnotime when browsing because it doesnt recognize the entry
- Fix sourceforge bug [ 799077 ] projects blanked when first time user tries to sort
- fix broken leap-year calculation, leading to bugs sourceforge bugs [ 983408 ] and [ 1114205 ]
- Fix crash due to hoverhelp timer popping after a report window is closed.
- Change activity report to display date/time in two distinct html table columns (prettier alignment)
- Bug fix: sourceforge bug report fixed [ 877193 ] toolbar wont go to/stay in text-only mode
- Bug fix: editing time brings up wrong report
- fedora .spec file is out of date and rpm cannot build rpm
- Fix bug involving copy of old gnotime files to a new machine on which gnotime has never been run before.
- Fix sourceforge bug [ 1276458 ] "Empty" appears in diary entry
- Apply sourceforge patch 1176719 Extensible fix for gtkhtml3 building
- Apply 1171394 Adds separate timeout for "No Project" dialog
- Apply sourceforge patch 085911 Add "-" value for status field
- Apply sourceforge patch 074658 Add wordwrapping to diary entry boxes
- Apply sourceforge patch 1074458 Fix a crash when invoking help
- Apply sourceforge patch 1038701 Fix to Activity item in popup menu
- Apply sourceforge patch 1027582 Build system update for qof inclusion
- Fix idle time so that it works with Linux 2.6 kernel /proc/interrupts
- use %e to see the estimated sizing of a project in the logfiles
- Apply new pt_BR translation from Goedson Teixeira Paixao
- Fix for Debian Bug #250776, change widget visibility in the edit interval dialog
Download (1.3MB)
Added: 2007-02-14 License: GPL (GNU General Public License) Price:
983 downloads
Ignorance 2.2
Ignorance is a flexible, powerful content filtering plugin for Gaim. more>>
Ignorance is a content filtering plugin for Gaim. If you love Gaim for chat, but find yourself missing the filtering features of clients like zinc, then Ignorance is for you!
<<less Download (0.22MB)
Added: 2005-10-21 License: GPL (GNU General Public License) Price:
1463 downloads
PloneSelenium 1.2.2
PloneSelenium provides a product for web-based functional tests. more>>
PloneSelenium provides a product for web-based functional tests.
PloneSelenium is a Plone Product allowing developers to create TTW Selenium test suites with a single Python Script, in order to do browser-based functional testing of their site.
Once you have developped the tests with PloneSelenium, you can run them in batch mode in Zelenium.
Functional tests are exported from PloneSelenium to Zelenium, so you can profit from the Zelenium features.
Enhancements:
- Disjointed scripts names from action title and id
- Making it possible to start tests as anonymous when the test users were not yet created using a manager user.
<<lessPloneSelenium is a Plone Product allowing developers to create TTW Selenium test suites with a single Python Script, in order to do browser-based functional testing of their site.
Once you have developped the tests with PloneSelenium, you can run them in batch mode in Zelenium.
Functional tests are exported from PloneSelenium to Zelenium, so you can profit from the Zelenium features.
Enhancements:
- Disjointed scripts names from action title and id
- Making it possible to start tests as anonymous when the test users were not yet created using a manager user.
Download (0.11MB)
Added: 2007-02-12 License: GPL (GNU General Public License) Price:
986 downloads
Term::TUI 1.20
Term::TUI is a simple tool for building text-based user interfaces. more>>
Term::TUI is a simple tool for building text-based user interfaces.
SYNOPSIS
If TUI_Run is the only routine being used:
use Term::TUI;
$flag=&TUI_Run($command,%desc);
$version=&Term::TUI::TUI_Version;
If other TUI subroutines are used:
use Term::TUI qw(:all);
$flag=&TUI_Run($command,%desc);
&TUI_Out($message);
$flag=&TUI_Script(%desc,$script,$sep);
Many times, Ive wanted to quickly write a nice text-based user interface around a set of perl routines only to end up writing the full (though simple) parser and interface to make it nice enough, and friendly enough, to be usable.
This module creates a simple but powerful text based user interface around perl routines, adding such features as command line history, command line editing, and online help (command completion will also be implemented), while hiding all details of the interface from the programmer.
The interface is described in a simple hash which is passed to the TUI_Run command. This routine exits only when the user has exited the program (returning a flag signalling any special exit conditions).
<<lessSYNOPSIS
If TUI_Run is the only routine being used:
use Term::TUI;
$flag=&TUI_Run($command,%desc);
$version=&Term::TUI::TUI_Version;
If other TUI subroutines are used:
use Term::TUI qw(:all);
$flag=&TUI_Run($command,%desc);
&TUI_Out($message);
$flag=&TUI_Script(%desc,$script,$sep);
Many times, Ive wanted to quickly write a nice text-based user interface around a set of perl routines only to end up writing the full (though simple) parser and interface to make it nice enough, and friendly enough, to be usable.
This module creates a simple but powerful text based user interface around perl routines, adding such features as command line history, command line editing, and online help (command completion will also be implemented), while hiding all details of the interface from the programmer.
The interface is described in a simple hash which is passed to the TUI_Run command. This routine exits only when the user has exited the program (returning a flag signalling any special exit conditions).
Download (0.007MB)
Added: 2006-09-05 License: Perl Artistic License Price:
1144 downloads
PloneSearchBox 2.0.2
PloneSearchBox project is a portlet integrating different search engines. more>>
PloneSearchBox project is a portlet integrating different search engines.
PloneSearchBox is a compoment for Plone. It allows users to access quickly to a search tool. The Search can be done on the entire site, the current section of the site, or directly in search engine like google.
A tool is installed on the root site : portal_searchbox. Through the ZMI it allows to change what are the search engines proposed. In the textarea enter a search engine per line. This must be formated like folowed :
engine_name;engine_url?search=%(text)s
Dont forget the semi colon. %(text)s is the pattern that will be replaced by the ressearched text. If there are several pattern, text will be the label of the input box in the generated form.
If what is between the parantheses is different of text, it will be taken as label for the input field.
In the search_tool engines list, add commented line with #.
Enhancements:
- Make Installation work with Plone 2.1
- Zope Security added in portal_searchbox
- When engine list is empty, the list is really deleted.
<<lessPloneSearchBox is a compoment for Plone. It allows users to access quickly to a search tool. The Search can be done on the entire site, the current section of the site, or directly in search engine like google.
A tool is installed on the root site : portal_searchbox. Through the ZMI it allows to change what are the search engines proposed. In the textarea enter a search engine per line. This must be formated like folowed :
engine_name;engine_url?search=%(text)s
Dont forget the semi colon. %(text)s is the pattern that will be replaced by the ressearched text. If there are several pattern, text will be the label of the input box in the generated form.
If what is between the parantheses is different of text, it will be taken as label for the input field.
In the search_tool engines list, add commented line with #.
Enhancements:
- Make Installation work with Plone 2.1
- Zope Security added in portal_searchbox
- When engine list is empty, the list is really deleted.
Download (0.12MB)
Added: 2007-02-12 License: GPL (GNU General Public License) Price:
985 downloads
WordPress 2.2.2
WordPress is a state-of-the-art semantic personal publishing platform with a focus on aesthetics, web standards, and usability. more>> <<less
Download (0.64MB)
Added: 2007-08-07 License: GPL (GNU General Public License) Price:
1179 downloads
PloneChat 2.2.2
PloneChat project is a chat product for Plone. more>>
PloneChat project is a chat product for Plone.
This product is chat (interactive discussion tool) product for Zope/CMF/Plone.
<<lessThis product is chat (interactive discussion tool) product for Zope/CMF/Plone.
Download (0.13MB)
Added: 2007-02-09 License: GPL (GNU General Public License) Price:
987 downloads
easyNotes 0.2.2
easyNotes project is a Web-based multi-user notes management application. more>>
easyNotes project is a Web-based multi-user notes management application.
easyNotes is a Web application for managing notes within a large group of different users.
Main features:
General features
- Multiuser notes management
- simulated row level locking
- Organisation of notes with folders
- Access management
- User / Group management
- Rights management (depending on the great software phpGACL)
- Multiple skins / themes
- English / German
- for Mozilla / Firebird / IE
- PHPUnit Testing
Notes management
- Create new notes
- Search notes
- Filter notes by owner and / or group
Enhancements:
- There are some bugfixes.
- An initial plugin (calendar) has been added to show how easyApplications can be customized according to your needs.
<<lesseasyNotes is a Web application for managing notes within a large group of different users.
Main features:
General features
- Multiuser notes management
- simulated row level locking
- Organisation of notes with folders
- Access management
- User / Group management
- Rights management (depending on the great software phpGACL)
- Multiple skins / themes
- English / German
- for Mozilla / Firebird / IE
- PHPUnit Testing
Notes management
- Create new notes
- Search notes
- Filter notes by owner and / or group
Enhancements:
- There are some bugfixes.
- An initial plugin (calendar) has been added to show how easyApplications can be customized according to your needs.
Download (2.7MB)
Added: 2007-04-30 License: MPL (Mozilla Public License) Price:
909 downloads
Cafeterra 2.2.0
Cafeterra provides a message queue-based EAI tool. more>>
Cafeterra provides a message queue-based EAI tool.
Cafeterra is a message queue-based EAI project with a Web user interface for designing, processing, and monitoring inter-application data flows.
Supported connectors are based on an RDBMS, flat files (CSV, fixed length record, XML, HL7, HTML, etc.), LDAP, and SOAP, with others planned.
The main features are message tracking and archival, joining different connectors, an internal scheduler, and raising the flow on events.
Enhancements:
- Support of POP3 and IMAP
- Support of Perl Language in addition to SQL Language for Getmsg, SendMsg, SendMsgBis, AckMsg and GlobalAck
- Evaluate Perl script during design to see if there is any syntax error
- cgi/CafImport.pm : Sort objects; config filename extension handling; remove trailing r
- cgi/Context.pm : handle correctly copying procedure
- cgi/LContainer.pm : remove some trace
- cgi/MFlow.pm : more launch options;
- cgi/Scripts.pm : validate perl scripts (eval)
- cgi/Users.pm : bug when updating user the object attributes were not upadted
- cgi/EN/translate.pm : added some translation
- cgi/FR/translate.pm : idem
- connectors/cafProto.pm : die on open file failure
- connectors/cafpSMTP.pm : bug on attachment; replay_to and fake_to attributes default values
- connectors/refQry.pm : update of datatypeid
- install/Pg/InitSqlScript.pm : Added new protocols/drivers/datatypes/attributes (Mail/POP3/IMAP)
- install/Pg/conf.pm.tpl : Version changed
- install/Pg/d_attrdef.sql : New attributes for new protocols/drivers (Mail/POP3/IMAP)
- install/Pg/d_datatype.sql : New datatypes for new drivers (POP3/IMAP)
- install/Pg/d_driver.sql : New drivers (POP3/IMAP)
- install/Pg/d_protocol.sql : New protocol (Mail)
- install/Pg/index.pl.tpl : Invalidate last value of _currsubmenu
- mains/FlowRt.pm : infinite loop for backtraking when readind dependant messages; avoid die on startsession failure
- mains/FlowTls.pm : classVars misspelling; a query can be an perl script or a sql script
- mains/SFlowRt.pm : handling perl script and sql scripts for getmsg, sendmsg, etc ... in addition to sql script; handle correctly the delins method; LogRbsMessagr enhancement
- mains/SOAPHTTPWS.pm : removed some trace text
- mains/launch.pl : more launch options
- site/help/pageshelp.pm : image reference bug
- site/help/* : translation and orthograph
- site/models/mflowl.html : launch options
- tools/cafUtils.pm : parse mime date
- tools/mydiff.sh : new directories
- DBD/CafeterraDBD.pm : creation
- connectors/cafdPOP3.pm : creation
- connectors/cafdIMAP.pm : creation
<<lessCafeterra is a message queue-based EAI project with a Web user interface for designing, processing, and monitoring inter-application data flows.
Supported connectors are based on an RDBMS, flat files (CSV, fixed length record, XML, HL7, HTML, etc.), LDAP, and SOAP, with others planned.
The main features are message tracking and archival, joining different connectors, an internal scheduler, and raising the flow on events.
Enhancements:
- Support of POP3 and IMAP
- Support of Perl Language in addition to SQL Language for Getmsg, SendMsg, SendMsgBis, AckMsg and GlobalAck
- Evaluate Perl script during design to see if there is any syntax error
- cgi/CafImport.pm : Sort objects; config filename extension handling; remove trailing r
- cgi/Context.pm : handle correctly copying procedure
- cgi/LContainer.pm : remove some trace
- cgi/MFlow.pm : more launch options;
- cgi/Scripts.pm : validate perl scripts (eval)
- cgi/Users.pm : bug when updating user the object attributes were not upadted
- cgi/EN/translate.pm : added some translation
- cgi/FR/translate.pm : idem
- connectors/cafProto.pm : die on open file failure
- connectors/cafpSMTP.pm : bug on attachment; replay_to and fake_to attributes default values
- connectors/refQry.pm : update of datatypeid
- install/Pg/InitSqlScript.pm : Added new protocols/drivers/datatypes/attributes (Mail/POP3/IMAP)
- install/Pg/conf.pm.tpl : Version changed
- install/Pg/d_attrdef.sql : New attributes for new protocols/drivers (Mail/POP3/IMAP)
- install/Pg/d_datatype.sql : New datatypes for new drivers (POP3/IMAP)
- install/Pg/d_driver.sql : New drivers (POP3/IMAP)
- install/Pg/d_protocol.sql : New protocol (Mail)
- install/Pg/index.pl.tpl : Invalidate last value of _currsubmenu
- mains/FlowRt.pm : infinite loop for backtraking when readind dependant messages; avoid die on startsession failure
- mains/FlowTls.pm : classVars misspelling; a query can be an perl script or a sql script
- mains/SFlowRt.pm : handling perl script and sql scripts for getmsg, sendmsg, etc ... in addition to sql script; handle correctly the delins method; LogRbsMessagr enhancement
- mains/SOAPHTTPWS.pm : removed some trace text
- mains/launch.pl : more launch options
- site/help/pageshelp.pm : image reference bug
- site/help/* : translation and orthograph
- site/models/mflowl.html : launch options
- tools/cafUtils.pm : parse mime date
- tools/mydiff.sh : new directories
- DBD/CafeterraDBD.pm : creation
- connectors/cafdPOP3.pm : creation
- connectors/cafdIMAP.pm : creation
Download (0.73MB)
Added: 2007-02-19 License: LGPL (GNU Lesser General Public License) Price:
978 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above newerth sep 2 search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
