Free ds software for linux

VcsTools::DataSpec::HpTnd is a Hp Tnd custom data for HMS logs.

SYNOPSIS

use VcsTools::DataSpec::HpTnd qw($description readHook);
use VcsTools::LogParser ;

my $ds = new VcsTools::LogParser
(
readHook => &readHook,
description => $description
) ;

This class contains all the custom information needed to retrieve our data from our database using the generic VcsTools::LogParser class.

The $description hash ref defines the informations that are contained in the log of each version of the HMS file.
Needless to say this file is tailored for HP Tnd needs and HMS keywords. Nevertheless, it can be used as a template for other VCS systems and other needs.

Hardware::iButton is a Perl module that allows to talk to DalSemi iButtons via a DS2480 serial widget.

SYNOPSIS

use Hardware::iButton::Connection;
$c = new Hardware::iButton::Connection "/dev/ttyS0";
@b = $c->scan();
foreach $b (@b) {
print "family: ",$b->family(), "serial number: ", $b->serial(),"n";
print "id: ",$b->id(),"n"; # id = family . serial . crc
print "reg0: ",$b->readreg(0),"n";
}

This module talks to iButtons via the "active" serial interface (anything using the DS2480, including the DS1411k and the DS 9097U). It builds up a list of devices available, lets you read and write their registers, etc.

The connection object is an Hardware::iButton::Connection. The main user-visible purpose of it is to provide a list of Hardware::iButton::Device objects. These can be subclassed once their family codes are known to provide specialized methods unique to the capabilities of that device. Those devices will then be Hardware::iButton::Device::DS1920, etc.

iButtons and solder-mount Touch Memory devices are each identified with a unique 64-bit number. This is broken up into 8 bits of a "family code", which specifies the part number (and consequently the capabilities), then 48 bits of device ID (which Dallas insures is globally unique), then 8 bits of CRC. When you pass these IDs to and from this package, use hex strings like "0123456789ab".

DSLinux is a project that aims to port Linux to the Nintendo DS gaming console.
Important information:
root password for DSLinux builds since Jun 28 2005 is "uClinux" (case sensitive!)
Works on real hardware, use on emulators is not supported
Since Apr 28 2007, RAM build is integrated in the DLDI build.
Enhancements:
- Restored user/mc/src/vfs/mad.c
- Restored user/mc/src/vfs/mad.h
- Restored user/mc/src/intl/libintl.h
- D toolchain/patches/elf2flt-20051225.diff
- A toolchain/patches/elf2flt-20070723.diff
- U toolchain/Makefile
- U vendors/Nintendo/DLDI/config.uClibc
- U lib/uClibc++/Rules.mak
- U lib/uClibc++/extra/Configs/dslinux_config
- D lib/uClibc++/include/system_configuration.h
- U lib/uClibc++/Makefile
- U linux-2.6.x/arch/arm/kernel/ptrace.c
- U linux-2.6.x/arch/arm/mm/fault.c
- Updated to revision 1851.

B::CC is Perl compilers optimized C translation backend.

SYNOPSIS

perl -MO=CC[,OPTIONS] foo.pl

This compiler backend takes Perl source and generates C source code corresponding to the flow of your program. In other words, this backend is somewhat a "real" compiler in the sense that many people think about compilers. Note however that, currently, it is a very poor compiler in that although it generates (mostly, or at least sometimes) correct code, it performs relatively few optimisations. This will change as the compiler develops. The result is that running an executable compiled with this backend may start up more quickly than running the original Perl program (a feature shared by the C compiler backend--see B::C) and may also execute slightly faster. This is by no means a good optimising compiler--yet.

OPTIONS

If there are any non-option arguments, they are taken to be names of objects to be saved (probably doesnt work properly yet). Without extra arguments, it saves the main program.

-ofilename

Output to filename instead of STDOUT

-v

Verbose compilation (currently gives a few compilation statistics).

--

Force end of options

-uPackname

Force apparently unused subs from package Packname to be compiled. This allows programs to use eval "foo()" even when sub foo is never seen to be used at compile time. The down side is that any subs which really are never used also have code generated. This option is necessary, for example, if you have a signal handler foo which you initialise with $SIG{BAR} = "foo". A better fix, though, is just to change it to $SIG{BAR} = &foo. You can have multiple -u options. The compiler tries to figure out which packages may possibly have subs in which need compiling but the current version doesnt do it very well. In particular, it is confused by nested packages (i.e. of the form A::B) where package A does not contain any subs.

-mModulename

Instead of generating source for a runnable executable, generate source for an XSUB module. The boot_Modulename function (which DynaLoader can look for) does the appropriate initialisation and runs the main part of the Perl source that is being compiled.

-D

Debug options (concatenated or separate flags like perl -D).

-Dr

Writes debugging output to STDERR just as its about to write to the programs runtime (otherwise writes debugging info as comments in its C output).

-DO

Outputs each OP as its compiled

-Ds

Outputs the contents of the shadow stack at each OP

-Dp

Outputs the contents of the shadow pad of lexicals as its loaded for each sub or the main program.

-Dq

Outputs the name of each fake PP function in the queue as its about to process it.

-Dl

Output the filename and line number of each original line of Perl code as its processed (pp_nextstate).

-Dt

Outputs timing information of compilation stages.

-f

Force optimisations on or off one at a time.

-ffreetmps-each-bblock

Delays FREETMPS from the end of each statement to the end of the each basic block.

-ffreetmps-each-loop

Delays FREETMPS from the end of each statement to the end of the group of basic blocks forming a loop. At most one of the freetmps-each-* options can be used.

-fomit-taint

Omits generating code for handling perls tainting mechanism.

-On

Optimisation level (n = 0, 1, 2, ...). -O means -O1. Currently, -O1 sets -ffreetmps-each-bblock and -O2 sets -ffreetmps-each-loop.

SlimServer on DiskStation is an add-on package to the Synology DiskStation family of PowerPC based NAS devices providing the environment to run SlimDevices SlimServer on it.

This project integrates into the DS administrative Web interface and comes with various user-friendly tools and scripts to maintain the installation.

It supports all currently official features of Slimserver, such as Asian character display and on-the-fly transcoding of various music file formats. Popular third party plugins are supported as well.

Deepest Sender is a client that will allow you to post to blogs from directly within Firefox. The project is primarily a LiveJournal client, although it supports Blogger (GData) and WordPress (metaWeblog) too, with support for more stuff to come.

Note that the actual Deepest Sender website will always have the most up to date version.

If DS wont load for you in Firefox 2, and youre using a non-US English version (ie. British English or whatever), you will need to download a spellcheck dictionary in order for it to work. Non US English builds dont come with dictionaries.

If DS keeps loading in Russian and youre running SeaMonkey, check the LiveJournal group, it has a guide to solving the problem.

Jhead is a command line driven utility for extracting digital camera settings from the Exif format files used by many digital cameras. It handles the various confusing ways these can be expressed, and displays them as F-stop, shutter speed, etc.
Jhead project is also able to reduce the size of digital camera JPEGs without loss of information, by deleting integral thumbnails that digital cameras put into the Exif header. If you need to add Exif support to a program, this is a simple program to cut and paste from. Many projects, including PHP, have reused code from this utility.
Things jhead can extract from an Exif jpeg file:
- Integral low-res Exif thumbnail
- Shutter speed
- Camera F-stop number
- Flash used (yes/no)
- Distance camera was focused at
- Focal length and calculate 35 mm equivalent focal length
- Image resolution
- Time and date picture was taken
- Camera make and model
Things jhead can modify in an exif jpeg file:
- Up-right images according to rotation tag using jpegtran
- Set or relative adjust internal exif timestamps
- Re-name or date stamp fils according to exif timestamp
- Transfer exif headers between images
- Edit jpeg comments
- Delete exif or comment sections from jpeg images
Enhancements:
- The "-mkexif" option to create a new minimal EXIF section in an existing image was added.
- The "-ds" and "-dsft" options to manipulate the EXIF date and time were added.
- Image and thumbnail rotation flag handling was fixed.