disk drives
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 1672
Puppy Linux 4.2.1
Puppy Linux provides you with a perfect and very useful evolutionary operating system which is based on GNU Linux. more>>
Puppy Linux 4.2.1 provides you with a perfect and very useful evolutionary operating system which is based on GNU Linux. Whats different here is that Puppy is extraordinarily small, yet quite full featured. Puppy Linux can boot into a 64MB ramdisk, and that's it, the whole caboodle runs in RAM. Unlike live CD distributions that have to keep pulling stuff off the CD, Puppy in its entirety loads into RAM. This means that all applications start in the blink of an eye and respond to user input instantly.
Major Features:
- Puppy Linux has the ability to boot off a flash card or any USB memory device (flash-Puppy), CDROM (live-Puppy), Zip disk or LS/120/240 Superdisk (zippy-Puppy), floppy disks (floppy-Puppy), internal hard drive (hard-Puppy).
- Puppy occupies about 50-60M on my USB Flash drive, CDROM, or whatever is the storage media.
- When Puppy boots, everything uncompressed into a RAM area that we call a "ramdisk". The live-CD will bootup on systems with only 32M RAM, but the more RAM you have the more Puppy is able to keep files permanently in ramdisk hence more speed. A PC with 128M RAM is the recommended minimum.
- Note that Puppy will automatically use a swap partition if it exists. When booting from a USB Flash device, Puppy tries to load all the Flash files into physical RAM, but if there is not enough RAM then Puppy is able to copy the excess to a swap partition if it exists. This eliminates writes to the Flash memory during a session, greatly extending its life span.
- You may need to have a swap partition to run Firefox or Mozilla on PCs with less than 64M RAM. Certainly, for a PC with only 32M RAM, a swap partition is necessary to run most of the large GUI applications.
Enhancements:
- CUPS-1.3.10 regressed from 1.4b2 to resolve ongoing issues with CUPS printing.
- Fixed printing from Geany, Leafpad and Gnumeric using CUPS-1.3.10
- Abiword-2.6.3 with 2.6.6 plugins has been patched for improved .doc & .docx support (Liberation ttf fonts required for some documents)
- Pwidgets updated to 2.0.8
- Pcrypt updated to 17 May 2009 release and now requires Ccrypt to function. Bcrypt has been dropped in consequence.
- Ccrypt-1.7 added as dependency for Pcrypt
- MIME-types updated in Rox-2.6.1
- Patches for gtk+ Xinput and b43 broadcom network driver
- Pmusic updated to 0.6.4
- Pschedule updated to 0.7
- Plus previously issued patches for nbtscan, mountcifs, jwm-tray, xsane, network wizard (now at April 4 release), mtpaint-snapshot, gtk+2.12.1-Xinput-fix and pcp (Puppy control panel).
Added: 2009-05-22 License: GPL Price: FREE
1 downloads
Other version of Puppy Linux
to boot off a flash card or any USB memory device (flash-Puppy), CDROM (live-Puppy), Zip disk or ... /120/240 Superdisk (zippy-Puppy), floppy disks (floppy-Puppy), internal hard drive (hardLicense:GPL (GNU General Public License)
Shadow For Linux 2.0.25
This application is a powerful data encoder/decoder more>> This application is a powerful data encoder/decoder that has the possibility to encode/decode everything and anything that fits on/in your Hard Disk Drive. You can encode texts, pictures, movies, music, applications ... so on.<<less
Download (115KB)
Added: 2009-04-24 License: Freeware Price: Free
184 downloads
Faust For Linux 1.0.75
This application is a powerful data encoder/decoder more>> This application is a powerful data encoder/decoder that has the possibility to encode/decode everything and anything that fits on/in your Hard Disk Drive. You can encode texts, pictures, movies, music, applications ... so on. that has the possibility to encode/decode everything and anything that fits on/in your Hard Disk Drive. You can encode texts, pictures, movies, music, applications ... so on.<<less
Download (122KB)
Added: 2009-04-23 License: Freeware Price: Free
185 downloads
FREE CompuSec PC Security Suite - Linux 4.18.1
Protects PC: Pre-boot authentication, encrypts full HDD, file, floppy &USB drive more>> FREE CompuSec is a suite of security solutions designed to completely protect desktops and notebooks. This software is a full version without any limitations and it is not a demo. The security functions that can be found in FREE CompuSec are listed below. Pre-boot Access Control requires you to enter your userID and password before the system will boot up.
Once authentication is completed, FREE CompuSec will automatically log you into the windows environment and provide a screen saver lock as well. Full Hard Disk Encryption using AES as the standard algorithm to keep your data safe. The intelligent program ensures fast encryption speeds that will minimize any effect on performance. A file encryption function is also included allowing users to secure exchange files via FTP, email attachements etc. Encryption of Floppy Disk and removable media (e.g USB thumb drives or HDD, firewire HDD etc) allows users to secure their data between their CompuSec protected PCs. Encryption of Server Files & Subdirectories - SafeLan, allows users to store and share encrypted files in a network. FREE CompuSec can be deployed as single user installation or centrally managed. With central management, the security definitions such as, password lifetime, encryption keys and user access rights can be defined centrally.
FREE CompuSec is Free from CE-Infosys. Other versions feature the use of e-Identity (a smart card or USB token) or Biometric fingerprint scanner that will complement your password and store your digital certificates, providing strong two-factor authentication and access control. FREE CompuSec can be upgraded at any time. A FREE CompuSec Window version can be downloaded @ http://www.ce-infosys.com/CeiNews_FreeCompuSec.asp
There is even Free CompuSec support at http://groups.yahoo.com/group/CompuSec<<less
Download (13.70MB)
Added: 2009-04-14 License: Freeware Price: Free
195 downloads
cdrtools 2.01.01a34
cdrtools is a tool to create disk-at-once and track-at-once CDs. more>>
cdrtools (formerly cdrecord) creates home-burned CDs with a CDR/CDRW recorder. It works as a burn engine for several applications.
cdrtools supports CD recorders from many different vendors; all SCSI-3/mmc- and ATAPI/mmc-compliant drives should also work.
Supported features include IDE/ATAPI, parallel port, and SCSI drives, audio CDs, data CDs, and mixed CDs, full multi-session support, CDRWs (rewritable), TAO, DAO, RAW, and human-readable error messages.
cdrtools includes remote SCSI support and can access local or remote CD writers.
Enhancements:
- A +-1 size realloc() problem was fixed in TOC handling for cdda2wav.
- A workaround was added for a double free problem in mkisofs, introduced with multi-extent file support, that caused it to dump core on Cygwin.
<<lesscdrtools supports CD recorders from many different vendors; all SCSI-3/mmc- and ATAPI/mmc-compliant drives should also work.
Supported features include IDE/ATAPI, parallel port, and SCSI drives, audio CDs, data CDs, and mixed CDs, full multi-session support, CDRWs (rewritable), TAO, DAO, RAW, and human-readable error messages.
cdrtools includes remote SCSI support and can access local or remote CD writers.
Enhancements:
- A +-1 size realloc() problem was fixed in TOC handling for cdda2wav.
- A workaround was added for a double free problem in mkisofs, introduced with multi-extent file support, that caused it to dump core on Cygwin.
Download (1.9MB)
Added: 2007-08-21 License: GPL (GNU General Public License) Price:
817 downloads
Ghost for Linux 0.23
Ghost for Linux is a hard disk and partition imaging and cloning tool similar to Norton Ghost. more>>
Ghost for Linux project is a hard disk and partition imaging and cloning tool similar to "Norton Ghost" and by Symantec.
The created images are optionally compressed, and they can be stored on a local hard drive or transferred to an anonymous FTP server.
A drive can be cloned using the "ClicknClone" function. g4l supports file splitting if the local filesystem does not support writing files >2GB. The included kernel supports ATA, serial-ATA, and SCSI drives.
Common network cards are supported. It is packaged as a bootable CD image with an ncurses GUI for easy use.
Enhancements:
- This release adds new kernels and syslinux, plus other support program options.
- It adds ntfs-3g to support writing to ntfs partitions for the local backup images and adds ntfsclone backups to local drives or partitions.
- Users can now copy the files from the CD image to a flash drive that has been made bootable, and it will then work from flash.
<<lessThe created images are optionally compressed, and they can be stored on a local hard drive or transferred to an anonymous FTP server.
A drive can be cloned using the "ClicknClone" function. g4l supports file splitting if the local filesystem does not support writing files >2GB. The included kernel supports ATA, serial-ATA, and SCSI drives.
Common network cards are supported. It is packaged as a bootable CD image with an ncurses GUI for easy use.
Enhancements:
- This release adds new kernels and syslinux, plus other support program options.
- It adds ntfs-3g to support writing to ntfs partitions for the local backup images and adds ntfsclone backups to local drives or partitions.
- Users can now copy the files from the CD image to a flash drive that has been made bootable, and it will then work from flash.
Download (32MB)
Added: 2007-08-17 License: GPL (GNU General Public License) Price:
586 downloads
Apple Disk Transfer ProDOS 1.0.2
Apple Disk Transfer ProDOS transfers diskettes and logical disk images between Apple ][-era computers and the modern world. more>>
Apple Disk Transfer ProDOS (or ADTPro for short) transfers diskettes and logical disk images between Apple ][-era computers and the modern world. If youre familiar with the original ADT, ADTPro extends ADTs reach by working with more logical disk formats, drive types, communications devices, and host operating systems.
Main features:
- Compatibility with any device ProDOS can read
- Compatibility with any Apple ][ (or clone) computer with 64k memory
- Compatibility with many logical disk image formats: .DSK, .PO, .NIB, 2IMG
- Server compatibility with original ADT client program
- Server compatibility with Windows, Mac OSX, Linux, and probably Solaris
- Ability to bootstrap an Apple ][ from bare metal over serial or cassette ports
- Ability to send floppies in "batch" mode without having to name each one
Server
The server program runs on a computer capable of running Java. Depending on how you want to connect to your Apple, you might also need a serial port and cables, an Uthernet card for your apple, or a couple of audio patch cables. The server offers a compact user interface that shows what communications are taking place between the host and the Apple ][.
The servers primary role is to send and receive disk images as requested from the client. But if you have recently acquired an Apple and a disk drive, and you have no software for it - youre in a bit of a tricky situation if you want to move software from the Internet all the way to your shiny new Apple. ADTPros server can help get you get bootstrapped.
Client
The client side runs on the Apple ][. It handles most of the user interaction. When choosing disks/volumes to transfer, anything that ProDOS can see is fair game. Transferring data occurs with a 20k buffer on the Apple, so all transfers are broken up into 20k chunks. A progress indicator shows how far it is into the current chunk, as well as a running count of the total progress.
Enhancements:
- This release has been enhanced with Jean-Marc Boutillon (Deckard)s FASTDSK fast Disk II reading routines.
- This results in a speed boost of 25%-33% for Disk II to host transfers.
- Bootstrapping operations have been reduced, as there is no longer a dependency on ProDOS BASIC.
<<lessMain features:
- Compatibility with any device ProDOS can read
- Compatibility with any Apple ][ (or clone) computer with 64k memory
- Compatibility with many logical disk image formats: .DSK, .PO, .NIB, 2IMG
- Server compatibility with original ADT client program
- Server compatibility with Windows, Mac OSX, Linux, and probably Solaris
- Ability to bootstrap an Apple ][ from bare metal over serial or cassette ports
- Ability to send floppies in "batch" mode without having to name each one
Server
The server program runs on a computer capable of running Java. Depending on how you want to connect to your Apple, you might also need a serial port and cables, an Uthernet card for your apple, or a couple of audio patch cables. The server offers a compact user interface that shows what communications are taking place between the host and the Apple ][.
The servers primary role is to send and receive disk images as requested from the client. But if you have recently acquired an Apple and a disk drive, and you have no software for it - youre in a bit of a tricky situation if you want to move software from the Internet all the way to your shiny new Apple. ADTPros server can help get you get bootstrapped.
Client
The client side runs on the Apple ][. It handles most of the user interaction. When choosing disks/volumes to transfer, anything that ProDOS can see is fair game. Transferring data occurs with a 20k buffer on the Apple, so all transfers are broken up into 20k chunks. A progress indicator shows how far it is into the current chunk, as well as a running count of the total progress.
Enhancements:
- This release has been enhanced with Jean-Marc Boutillon (Deckard)s FASTDSK fast Disk II reading routines.
- This results in a speed boost of 25%-33% for Disk II to host transfers.
- Bootstrapping operations have been reduced, as there is no longer a dependency on ProDOS BASIC.
Download (MB)
Added: 2007-08-13 License: GPL (GNU General Public License) Price:
816 downloads
Super Grub Disk 0.9598
Super Grub Disk is a bootable floppy or CDROM that is oriented towards system rescue. more>>
Super Grub Disk is a bootable floppy or CDROM that is oriented towards system rescue, specifically for repairing the booting process.
Super Grub Disk is simply a Grub Disk with a lot of useful menus.
It can activate partitions, boot partitions, boot MBRs, boot your former OS (Linux or another one) by loading menu.lst from your hard disk, automatically restore Grub on your MBR, swap hard disks in the BIOS, and boot from any available disk device.
Super Grub Disk project has multi-language support, and allows you to change the keyboard layout of your shell.
<<lessSuper Grub Disk is simply a Grub Disk with a lot of useful menus.
It can activate partitions, boot partitions, boot MBRs, boot your former OS (Linux or another one) by loading menu.lst from your hard disk, automatically restore Grub on your MBR, swap hard disks in the BIOS, and boot from any available disk device.
Super Grub Disk project has multi-language support, and allows you to change the keyboard layout of your shell.
Download (0.39MB)
Added: 2007-08-07 License: GPL (GNU General Public License) Price:
754 downloads
NCurses Disk Usage 1.3
NCurses Disk Usage provides a fast and easy interface to your harddrive. more>>
As the name already suggests, ncdu is an NCurses version of the famous old du unix command.
NCurses Disk Usage provides a fast and easy interface to your harddrive. Where is your disk space going? Why is your home directory that large? ncdu can answer those questions for you in just a matter of seconds!
<<lessNCurses Disk Usage provides a fast and easy interface to your harddrive. Where is your disk space going? Why is your home directory that large? ncdu can answer those questions for you in just a matter of seconds!
Download (0.089MB)
Added: 2007-08-06 License: MIT/X Consortium License Price:
813 downloads
Super Grub Disk Gparted System Rescue 001
Super Grub Disk is a bootable CDROM that is oriented towards system rescue, specifically for repairing the booting process. more>>
Super Grub Disk is a bootable floppy or CDROM that is oriented towards system rescue, specifically for repairing the booting process.
Super Grub Disk is simply a Grub Disk with a lot of useful menus. It can activate partitions, boot partitions, boot MBRs, boot your former OS (Linux or another one) by loading menu.lst from your hard disk, automatically restore Grub on your MBR, swap hard disks in the BIOS, and boot from any available disk device.
The ISO has multi-language support, and allows you to change the keyboard layout of your shell.
This version has Gpareted included.
<<lessSuper Grub Disk is simply a Grub Disk with a lot of useful menus. It can activate partitions, boot partitions, boot MBRs, boot your former OS (Linux or another one) by loading menu.lst from your hard disk, automatically restore Grub on your MBR, swap hard disks in the BIOS, and boot from any available disk device.
The ISO has multi-language support, and allows you to change the keyboard layout of your shell.
This version has Gpareted included.
Download (164.1MB)
Added: 2007-08-02 License: GPL (GNU General Public License) Price:
550 downloads
LibDsk 1.1.14
LibDsk is a library that attempts to create uniform functions for accessing floppy drives. more>>
LIBDSK is a library for accessing discs and disc image files. LibDsk is intended for use in:
- Emulator tools - converting between real floppy discs and disc images, as CPCTRANS / PCWTRANS do under DOS.
- Filesystem utilities - CPMTOOLS is configurable to use LIBDSK, thus allowing the use of CPMTOOLS on emulator .DSK images. To do this, install LIBDSK and then build CPMTOOLS, using "./configure --with-libdsk". For CPMTOOLS 1.9 or 2.0, you will also need to apply this patch.
- Emulators - it is possible to use LIBDSK as part of an emulators floppy controller emulation, thus giving the emulator transparent access to .DSK files or real discs.
LIBDSK has drivers for:
- Raw files (including /dev/fdn).
- .DSK files, as used in CPCEMU, JOYCE and other Sinclair/Amstrad emulators.
- MYZ80 hard drive image files.
- NanoWasp floppy image files.
- .CFI (Compressed Floppy Image) files, as created by FDCOPY.COM under DOS.
- The Linux floppy drive (supports CPC System and Data formats, which the standard "Raw file" driver does not).
- The Windows 3.x/95/98/ME/NT/2000 floppy drive.
- The DOS floppy drive (via the PC BIOS).
- CopyQM files (read-only)
- APRIDISK image files
- rcpmfs - a backend that makes a Unix/Windows directory appear to be a CP/M disc image.
- Another instance of LibDsk over a serial line.
Enhancements:
- Two new disc image formats (logical and teledisk) and one new disc geometry (TRDOS 640k) have been added.
<<less- Emulator tools - converting between real floppy discs and disc images, as CPCTRANS / PCWTRANS do under DOS.
- Filesystem utilities - CPMTOOLS is configurable to use LIBDSK, thus allowing the use of CPMTOOLS on emulator .DSK images. To do this, install LIBDSK and then build CPMTOOLS, using "./configure --with-libdsk". For CPMTOOLS 1.9 or 2.0, you will also need to apply this patch.
- Emulators - it is possible to use LIBDSK as part of an emulators floppy controller emulation, thus giving the emulator transparent access to .DSK files or real discs.
LIBDSK has drivers for:
- Raw files (including /dev/fdn).
- .DSK files, as used in CPCEMU, JOYCE and other Sinclair/Amstrad emulators.
- MYZ80 hard drive image files.
- NanoWasp floppy image files.
- .CFI (Compressed Floppy Image) files, as created by FDCOPY.COM under DOS.
- The Linux floppy drive (supports CPC System and Data formats, which the standard "Raw file" driver does not).
- The Windows 3.x/95/98/ME/NT/2000 floppy drive.
- The DOS floppy drive (via the PC BIOS).
- CopyQM files (read-only)
- APRIDISK image files
- rcpmfs - a backend that makes a Unix/Windows directory appear to be a CP/M disc image.
- Another instance of LibDsk over a serial line.
Enhancements:
- Two new disc image formats (logical and teledisk) and one new disc geometry (TRDOS 640k) have been added.
Download (0.75MB)
Added: 2007-07-28 License: GPL (GNU General Public License) Price:
822 downloads
GliBench SMP 0.5
GliBench is a Gui based benchmarking tool to check your computers CPU and hard disk performance. more>>
GliBench is a Gui based benchmarking tool to check your computers CPU and hard disk performance. The software is based on the benchmarks I developed for CliBench Mk III SMP a SMP enabled benchmark program for Win32.
There were several tries to port it to other architectures than Win32, but this was not that easy. So I decided to to a Linux port, based on the GTK toolkit with Gnome support, as Linux runs on almost every hardware around and GTK is quite easy to port to other OSs.
The CPU tests are all ported to ANSI C. They run fully multithreaded using posix threads. You can already use the program for benchmarking your hardware.
Enhancements:
- The application was completely rewritten for GTK+ 2.x and Glib 2.x.
- New stress tests and threaded I/O tests for benchmarking hard drives are available.
- Both console and GUI interfaces are available.
<<lessThere were several tries to port it to other architectures than Win32, but this was not that easy. So I decided to to a Linux port, based on the GTK toolkit with Gnome support, as Linux runs on almost every hardware around and GTK is quite easy to port to other OSs.
The CPU tests are all ported to ANSI C. They run fully multithreaded using posix threads. You can already use the program for benchmarking your hardware.
Enhancements:
- The application was completely rewritten for GTK+ 2.x and Glib 2.x.
- New stress tests and threaded I/O tests for benchmarking hard drives are available.
- Both console and GUI interfaces are available.
Download (0.092MB)
Added: 2007-07-18 License: GPL (GNU General Public License) Price:
829 downloads
Disk Manager 1.0.1
Disk manager is a simple filesystem configurator. more>>
Disk Manager project is a simple filesystem configurator that allow you to:
- Automaticly detect new partitions at startup.
- Fully manage configuration of filesystem.
- Enable/disable write support for NTFS (need ntfs-3g installed).
<<less- Automaticly detect new partitions at startup.
- Fully manage configuration of filesystem.
- Enable/disable write support for NTFS (need ntfs-3g installed).
Download (0.055MB)
Added: 2007-07-17 License: GPL (GNU General Public License) Price:
520 downloads
Atari800 2.0.3
Atari800 project is an Atari 8-bit computer and 5200 game system emulator for multiple platforms. more>>
Atari800 project is an Atari 8-bit computer and 5200 game system emulator for multiple platforms.
It runs on DOS, Windows, Amiga, Atari ST, Mac, and Linux/UNIX.
It includes support for Atari cartridge ROMs, popular Atari disk images files, running Atari binaries directly from the host system, and accessing the host filesystem from within the emulated Atari.
Main features:
- Atari 400, 800, 600 XL, 800XL, 130XE, 5200 Games System.
- 130XE compatible memory expansions: 320K, 576K, 1088K.
- Optional 4K RAM between 0xc000 and 0xcfff in 400/800 mode.
- Cycle-exact 6502 emulation, all unofficial instructions.
- Cycle-exact NMI interrupts, scanline-based POKEY interrupts.
- Cycle-exact ANTIC and GTIA emulation, all display modes.
- Player/Missile Graphics, exact priority control and collision detection.
- Exact POKEY registers (sound and random number generator).
- 8 disk drives, emulated at computer-to-drive communication and fast patched SIO levels.
- ATR, XFD, DCM, ATR.GZ and XFD.GZ disk images.
- Direct loading of Atari executable files and Atari BASIC programs.
- 42 cartridge types, raw and CART .
- Cassette recorder, raw and CAS images.
- Printer support.
- Files can be stored directly on your host computer via the H: device.
- Current emulation state can be saved in a state file.
- Sound support on Unix using "/dev/dsp".
- Stereo (two POKEYs) emulation.
- Joystick controller using numeric keypad.
- Real joystick support.
- Paddles, Atari touch tablet, Koala pad, light pen, light gun, ST/Amiga mouse, Atari trak-ball, joystick and Atari 5200 analog controller emulated using mouse.
- R-Time 8 emulation using host computer clock.
- Atari palette read from a file or calculated basing on user-defined parameters.
- Screen snapshots (normal and interlaced) to PCX and PNG files.
- Sound output may be written to WAV files.
- User interface on all versions supporting bitmapped graphics.
- R: device (the Atari850 serial ports) mapped to net or real serial port.
<<lessIt runs on DOS, Windows, Amiga, Atari ST, Mac, and Linux/UNIX.
It includes support for Atari cartridge ROMs, popular Atari disk images files, running Atari binaries directly from the host system, and accessing the host filesystem from within the emulated Atari.
Main features:
- Atari 400, 800, 600 XL, 800XL, 130XE, 5200 Games System.
- 130XE compatible memory expansions: 320K, 576K, 1088K.
- Optional 4K RAM between 0xc000 and 0xcfff in 400/800 mode.
- Cycle-exact 6502 emulation, all unofficial instructions.
- Cycle-exact NMI interrupts, scanline-based POKEY interrupts.
- Cycle-exact ANTIC and GTIA emulation, all display modes.
- Player/Missile Graphics, exact priority control and collision detection.
- Exact POKEY registers (sound and random number generator).
- 8 disk drives, emulated at computer-to-drive communication and fast patched SIO levels.
- ATR, XFD, DCM, ATR.GZ and XFD.GZ disk images.
- Direct loading of Atari executable files and Atari BASIC programs.
- 42 cartridge types, raw and CART .
- Cassette recorder, raw and CAS images.
- Printer support.
- Files can be stored directly on your host computer via the H: device.
- Current emulation state can be saved in a state file.
- Sound support on Unix using "/dev/dsp".
- Stereo (two POKEYs) emulation.
- Joystick controller using numeric keypad.
- Real joystick support.
- Paddles, Atari touch tablet, Koala pad, light pen, light gun, ST/Amiga mouse, Atari trak-ball, joystick and Atari 5200 analog controller emulated using mouse.
- R-Time 8 emulation using host computer clock.
- Atari palette read from a file or calculated basing on user-defined parameters.
- Screen snapshots (normal and interlaced) to PCX and PNG files.
- Sound output may be written to WAV files.
- User interface on all versions supporting bitmapped graphics.
- R: device (the Atari850 serial ports) mapped to net or real serial port.
Download (0.95MB)
Added: 2007-07-13 License: GPL (GNU General Public License) Price:
835 downloads
Download (0.98MB)
Added: 2007-07-01 License: GPL (GNU General Public License) Price:
849 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above disk drives search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
