Free cd image software for linux

Ark Linux Live is a Live CD edition of Ark Linux. Ark Linux is a beginner-friendly Linux distribution meant primarily for desktop use.
The Ark Linux team is pleased to announce the release of a first version of Ark Linux Live, a Live CD version of the Ark Linux operating system.
Ark Linux Live is designed to be as close to the "normal" version of Ark Linux as possible - and is built from the same source code.
There are a couple of known problems with this CD image, most notably non-English languages are not working in non-KDE applications, and the kernel spews some [harmless but dangerous looking] error messages at bootup. These (and other bugs that will possibly show up) will be fixed before the release of Ark Linux Live 2006.1.
The primary uses of a Live CD are:
- Recovering a normal system after a big hardware or software failure (Ark Linux will launch a special live CD for this purpose later, with more recovery tools and fewer other tools)
- Checking the system out without any risk
- Showing others what Linux is like, on their own hardware
- Taking your favorite operating system with you - e.g. to get on the net with Linux even if youre on vacation and the only internet cafe in town is a Microsoft shop
While it is possible to use Ark Linux Live as your primary operating system, that is not recommended - use Ark Linux Home instead.
Ark Linux is a Linux distribution designed especially for desktop use, primarily for people without prior Linux experience. Ark Linuxs main goal is ease of use, and the inclusion of many tools end users will need.
Ark Linux is fully Open Source and Free Software, meaning, basically, you can freely redistribute it in both modified and unmodified form.
Enhancements:
- The Ark Linux team is pleased to announce the immediate availability of Ark Linux 2007.1, the latest version of its multi-purpose desktop operating system. Ark Linux can be used for office/school work, desktop publishing, graphics, multimedia entertainment/editing, gaming, software development, and more.
Ark Linux is very adaptable and responsive to the users needs without being overly complicated and/or bloated or difficult to install (all a basic installation takes is 3 mouse clicks). For a more customized install, use the expert mode, which makes it possible to manually set up the partitions you wish to install Ark Linux into.
There have been many more changes since the 2006.1 release - all components have been updated to current versions. For example, Ark Linux 2007.1 includes the KDE 3.5.7 desktop, the OpenOffice.org 2.2.1 office suite and the Amarok music player 1.4.7. It also includes the latest underlying technologies such as Linux kernel 2.6.22.3, glibc 2.6.1, and has been built completely with gcc 4.2.1, resulting in a faster system and quicker response times.
A new and better integrated version of the wine Windows emulator makes it possible to run more Windows applications on Linux than before.
In addition to this, hardware detection has been improved, many new drivers are included, support for encrypted wireless networks has been improved and many additional applications and games have been added to the software repository.
We also have good news for developers and OEMs: The Ark Linux build system has been extended to allow customized builds of both Ark Linux and Ark Linux Live including your packages of choice - making it easier than ever to build your own Linux distribution. All details on the new build system can be found at http://wiki.arklinux.org/index.php/Customized_Ark_Linux_CDs-.
Ark Linux 2007.1 and various add-on CDs can be downloaded at http://www.arklinux.org/. Free live support is available using the web chat at http://www.arklinux.org/content/en/Live+Support

Partition Image application is a Linux/UNIX utility which saves partitions in many formats (see below) to an image file.
The image file can be compressed in the GZIP/BZIP2 formats to save disk space, and split into multiple files to be copied on removable floppies (ZIP for example); partitions can be saved across the network since version 0.6.0.
Partition Image will only copy data from the used portions of the partition. For speed and efficiency, free blocks are not written to the image file.
This is unlike the dd command, which also copies empty blocks. Partition Image also works for large, very full partitions. For example, a full 1 GB partition can be compressed with gzip down to 400MB.
This is very useful to save partitions to an image in some cases:
- First you can restore your linux partition if there is a problem (virus, file system errors, manipulation error) . When you have a problem, you just have to restore the partition, and after 10 minutes, you have the original partition. You can write the image to a CD-R if you dont want the image to use hard-disk space.
- This utility can be used to install many identical PCs. For example, if you buy 50 PCs, with the same hardware, and you want to install the same linux systems on all 50 PCs, you will save a lot of time. Indeed, you just have to install on the first PC and create an image from it. For the 49 others, you can use the image file and Partition Images restore function.

SLAX is a small bootable CD containing the Linux operating system. SLAX distirbution runs Linux directly from the CD (or USB) without installing.
The Live CD described here is based on the Slackware Linux distribution and is downloadable from this website as an ISO image.
The primary goal of SLAX is to provide a wide collection of useful software while keeping the cds image small enough to be written to a 185 MB CD-R(W) medium (small 8 cm CD). SLAX boots directly from the CD or USB devices and it provides a full featured Linux operating system.
All your available partitions and data storage devices (CD-ROM, USB storage devices, etc.) should be recognized at boot and should be mounted to /mnt/xx. As an example, "disc0part1" may be assigned to the first partition on your primary hard drive, "disc1part1" for your USB storage device, or "cdrom0" for your CD-ROM drive. SLAX will never write anything to the mounted devices. Mounting is safe and does not change the data.
After booting, you should be able to login as a "root", with the password "toor"; both without quotes, of course.
When logged in, you have many options. At the shell prompt, you may start Midnight Commander (type "mc" to the console), play some music from your hard drive (type "play /mnt/path/file.mp3"), adjust your audio volume (type "alsamixer"), configure IP address (type "netconfig") or browse web pages with the text-based browser (type "lynx http://url").
To start the graphical environment included with SLAX, type "gui" (for graphical user interface). It will attempt to autoconfigure your graphics card, monitor, keyboard and mice, and if successful it will run an X session with KDE. Im pretty sure that you will know how to get around at this point. :-) Use "guisafe" instead of "gui" for safe-mode (VESA framebuffer) without autodetection.
In the unfortunate case your mouse doesnt work, try to move it for a few seconds to see if it will be autodetected. If it isnt, shut down Xwindow (press Ctrl+Alt+Backspace) and start it again. If this wont help then you are using something I have not included in the autoconfiguration process (COM2 mouse?). If you are comfortable with bash, or you atleast understand how to make your favorite mouse function under Linux, try to modify the symbolic link /dev/mouse manually.
If you dont like the autoconfigured screen resolution, refresh rate, or the K Desktop Environment, start "gui" with some additional options. Try for example "gui 800x600 60", where 800x600 is the desired screen resolution and 60 is the desired refresh rate. Fluxbox is one of the other window managers included and may be called with "guifast" or "gui fluxbox". In any event, type "gui --help" for more information.
All scripts and source code are available and can be used to build your own Live CD.
SLAX is available as an ISO image of the CD. It fits on small 8cm CD-R(W). Burn it with your favorite cd-writing software and then boot from the CD.
You might want to check your BIOS to assure its set to boot the CD prior the disc.
SLAX CD contains:
- Linux Kernel 2.4.28-pre4 with SATA support
- X.org 6.8.1
- KDE 3.3.1
- KOffice 1.3.3
- KDE games
- MPlayer 1.0pre5 with KPlayer
- kopete ICQ/AIM/Y!/IRC
- midnight commander
- rdesktop (rscp in KDE)
- hotplug support
- cdrtools
- k3b burning GUI for KDE
- mutt email client
- wget
- and much more...

SystemRescueCd is a Linux system available from a bootable CDROM that provides an easy way to perform administrative tasks on your computer, such as creating and editing the partitions of the hard disk or backing up data.
System Rescue CD contains a lot of system utilities (such as parted, partimage, and fstools), and basic programs (such as editors, midnight commander, and network tools).
It also includes QtParted, a Partition Magic clone that makes editing partitons easy with its Qt graphical user interface. This CDROM aims to be very easy to use and accessible to everybody.
Main features:
- GNU Parted is the best tool for editing your disk partitions under linux
- QtParted is a Partition Magic clone for Linux.
- Partimage is a Ghost/Drive-image clone for Linux
- File systems tools (e2fsprogs, reiserfsprogs, xfsprogs, jfsutils, ntfsprogs, dosfstools): they allow you to format, resize, debug an existing partition of your hard disk
- Sfdisk allows you to backup and restore your partition table

Games::Go::SGF2misc::SVG is a Perl package to simplify SGF game rendering using Image::LibrSVG.

SYNOPSIS

use Games::Go::SGF2misc::SVG;

my $image = new Games::Go::SGF2misc::SVG(imagesize => 3in,
boardsize => 19,
gobanColor=> white );

$image->drawGoban();

$image->placeStone(b,cd);
$image->placeStone(w,[4,2]);
$image->placeStone(b,db);
$image->placeStone(w,dc);
$image->placeStone(b,cc);
$image->placeStone(w,eb);
$image->placeStone(b,cb);

$image->addCircle(cb,1);

$image->save($filename); # As a .svg
$image->export($filename); # As a .png

Mozvert image is a Firefox extension that uses convert from ImageMagick for saving images to its preferred formats.

It adds the entry "Convert Image As..." after "Save Image As..." with 8 predefined formats: PNG, JPG, GIF, XPM, TIFF, BMP, PS (PostScript), XBM, ICO.