Free network deepscan.exe software for linux

network jack is an Internet troubleshooting and information gathering tool. It provides a Web interface to several common command-line tools, including ping, traceroute, dig, and whois, as well as a subnet mask and CIDR block calculator.
Current Modules which you can find in the application:
Pinger
- Ping a host on the internet (currently only IPv4)
Tracer
- Traceroute to a host on the internet from the web server (currently only IPv4)
Digger
- Do a DNS Dig of a hostname or IP address (for reverse lookups)
Drooler
- block list lookup (aka RBL query, blackhole lookup)
Whoser
- lookup for domain names and IP addresses / blocks
Netter
- Mask / CIDR calculator
Linker
- Front" page for the tools, provides spot for links
Main features:
- It is intended to be easy to add new modules
- Seperates html code into its own file so can be customized without modifying the program files

Parallel Network Scanner provides a fast network services scanner.
pnscan is a scanner for TCP network services. It uses multithreading to increase its speed.
pnscan tries to be smart as to how many threads to start - it will dynamically start only as many as is needed to make progress in the scan - up to a maximum either as specified with the "-n" command line option, or 8 minus the maximum number of available file descriptors (pnscan tries to increase
it to the max limit automatically) - or any internal limit on the system (Linux normally only allows 256 threads).
Host ranges can be specified both as a CIDR - network name or IP address / mask bit length and as a range. When using CIDR notation - the first and last address is ignored (normally used for broadcasts)
Some examples:
192.168.0.0/24
192.160.0.1:192.160.0.254
arpanet/8
USAGE - EXAMPLES
# Scan network 192.168.0.0/24 for SSH daemons on port 22
pnscan 192.168.0.0/24 22
pnscan 192.168.0.1:192.168.0.254 ssh
# Scan hosts 192.168.10.34 ... 98 for IDENT servers, max 8 threads
pnscan -n8 -w"VERSION" 192.168.10.34:192.168.10.98 113
# Scan host 127.0.0.1 for WWW servers on all ports
pnscan -w"HEAD / HTTP/1.0rnrn" -r"Server:" 192.168.0.32 1:65525
pnscan -w"HEAD / HTTP/1.0rnrn" -r"Server:" localhost 1:65525
# Send binary data and expect the binary sequence FF 00 FF on port 145.
pnscan -W"05 5A 37" -R"FF 00 FF" 192.168.0.32 145
# Scan for Roxen servers and print the whole Server-line
pnscan -l -w"HEAD / HTTP/1.0rnrn" -r"Roxen" localhost 1:65525
# Scan for pidentd servers and try to locate the version
pnscan -w"VERSION" 192.160.0.0/24 113
# Scan network arpanet/24 for daytime servers and sort them IP-numerically
pnscan arpanet/10 daytime | ipsort
# Read host (&port) lines from stdin and scan the selected hosts for SSH
echo 192.160.10.11 ssh | pnscan -v
echo 192.160.10.12 | pnscan 22
Enhancements:
- pnscan.sgml Added the other options implemented in pnscan.c.
- pnscan.c: Modified the threads startup code to dynamically only start as many threads as is needed.

Java Network Stack provides a Java library for research oriented network programming.

Java Network Stack is a library used by the DIMES project to create new internet measurements. It provides a clean API for packet manipulation, send, receive, filter, and analysis. It is a unification of raw socket capabilities, MAC level networkingm, and IPv6 capabilities.

Network Pipemeter is a tool for measuring available bandwidth between hosts. nepim is also useful to generate network traffic for testing purposes.
nepim operates in client/server mode, is able to handle multiple parallel traffic streams, reports periodic partial statistics along the testing, and supports IPv6.
nepim has been tested under Linux, Solaris and FreeBSD, though it should work under other platforms as well. If you manage to build nepim for different systems, please send the patch.
- nepim is useful to assess the throughput at the transport layer (TCP or UDP) as seen by applications.
- nepim runs single-threaded and should impose very light burden on your CPU. Unless, of course, your testing hosts have relatively high network bandwidth compared to low CPU power.
- One single server can service multiple clients simultaneously.
- As of nepim 0.11, one single client can interact simultaneously with multiple servers. For instance, suppose you want to test, from a single client, two remote servers, one located at 10.0.0.1,2000 and another at 192.168.0.1,3000:
- nepim -c 10.0.0.1,2000/192.168.0.1,3000
- The server listens to both TCP and UDP sockets. The client by default uses TCP sockets. Use the "-u" client option to switch the client operation to UDP.
- By default, only the server sends traffic towards the client. Use the "-s" client option to reverse the behavior, then only the client will send traffic. Use the "-d" client option to make both client and server to send traffic.
- Use the "-r" client option to establish an upper bit rate limit. Without a rate limiting option, nepim sends as fast as possible. See also "-R" below. Please notice the rate is specified in bps (bits per seconds); for instance, the following example states a rate limit of 100,000 bps (100 Kbps):
- nepim -c 10.0.0.1 -r 100000
- Use the "-R" client option to establish an upper "packet" rate limit (outbound rate limit for transport layer segments). Without a rate limiting option, nepim sends as fast as possible. If both "-r" and "-R" are given, nepim limits the sending rate at the lower of those bounds.
- Use the "-n" client option to run multiple parallel traffic streams.
- Use the "-b" server option to make the server to listen on specific local addresses.
- Use the "-6" option to disable IPv6 support.
Enhancements:
- Support for randomizing the UDP destination address/port has been added in order to put stress on routers with on-demand (dynamic) forwarding table caches.

Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS hardware. Network UPS Tools uses a layered approach to connect all of the parts.
Drivers are provided for a wide assortment of equipment. They understand the specific language of each UPS and map it back to a compatibility layer.
This means both an expensive "smart" protocol UPS and a simple "power strip" model can be handled transparently.
This information is cached by the network server upsd, which then answers queries from the clients. upsd contains a number of access control features to limit the abilities of the clients. Only authorized hosts may monitor or control your UPS hardware if you wish.
Since the notion of monitoring over the network is built into the software, you can hang many systems off one large UPS and they will all shut down together.
Clients such as upsmon check on the status of the hardware and do things when necessary. The most important task is shutting down the operating system cleanly before the UPS runs out of power.
Other programs are also provided to log UPS status regularly, monitor status through your web browser, and more.
Enhancements:
- HAL support. IPv6 support.
- Support for many new devices.
- Many driver improvements.
- This release uses automake.

Network Traffic Analyzer analyzes the network traffic on multiple network devices and creates HTML statistics with some network usage graphs. Sometimes it is good to know, how the network is used, how many bytes were received and how many bytes were sent.Therefore, here is Network Traffic Analyzer, which creates simple network usage statistics.


Such statistics can tell you, how good your network connection really is (who cares about what Internet provider say, when was the network down, which time is the best time for downloading large packages of data etc. etc. Or with this software you can just better imagine, how many traffic can your home computer generate.