Free navicat crack software for linux

aircrack is a 802.11 sniffer and WEP/WPA key cracker.
It consists of: airodump (an 802.11 packet capture program), aireplay (an 802.11 packet injection program), aircrack (static WEP and WPA-PSK cracking), and airdecap (decrypts WEP/WPA capture files).
Enhancements:
- airodump: show probing clients as "not associated"
- airodump: dont substract the noise level unless madwifi
- airodump: fixed channel hopping with old orinoco
- airmon.sh: added detection of the zd1211 driver

EverCrack project is a cryptanalysis engine. The overall design goal is to systematically break down complex ciphers into their simplex components for cryptanalysis (by the kernel).
The kernel consists of an algebraic design (comparison and reduction) for breaking uniliteral, monoalphabetic ciphers instantaneously.
Currently, it can break a 4000-word cipher in milliseconds. EverCrack currently has multi-language support for the user interface and cracking encryption in other language dictionaries (English, German, French, Spanish, Italian, Swedish, Dutch, and Portuguese).
Enhancements:
- The dictionary set has been changed to lists of words by exact pattern.
- This reduces the search space completely and increases the speed by approximately 30%.
- Older dictionaries will not work with this release.

loadwatch project allows a single child process to run only when the load on a machine is within certain bounds. When the machines load passes the high load mark, then the child process is stopped.

The process is only restarted when the machines load drops below the low load mark. The load is checked at a user definable interval. loadwatch is distributed under the GNU GPL.

Usage:

loadwatch [-d < time>] [-h < load>] [-l < load>] [-n < copies] [-p < pid>] [-- < command>]
-d < int> load sampling interval (10 seconds)
-h < float> high load mark (1.25)
-l < float> low load mark (0.25)
-n < copies> number of children to fork (1)
-u < filename> file that will be used to externally control a
loadwatch process.
-p < pid> pid of process to control (loadwatch will actually
send signals to the group containing this pid)
NOTE: -p and < command> are mutually exclusive, but one has to be
specified.

Example:

loadwatch -d 10 -h 1.25 -l .25 -- ./rc5des

which means: check the load every 10 seconds, stop rc5des when the load is
greater than 1.25 and restart rc5des when the load drops to .25.

lw-ctl < filename> < cmd>
< filename> is the control file, this corresponds to a unix domain
socket.
< cmd> is the command to send to the loadwatch process.
RUN -> put loadwatch into RUN mode, that is the child process
runs regardless of the load.
STOP -> put loadwatch into STOP mode, that is, the child
process will not run regardless of the load.
WATCH -> WATCH mode, the normal load watching mode.

Example:

lw-ctl ./fooey RUN

Causes the loadwatch process (if it was started with "-u ./fooey") to go
into RUN mode. you could put lw-ctl in a cron job that runs in the
morning to put the job in STOP mode and then again in the evening to put
the job back into WATCH mode.

The children which loadwatch forks are all part of the same process group.
loadwatch stops and starts the processes by signalling the process
group with SIGSTOP and SIGCONT respectively.

Send suggestions and bug reports to . if you do anything
interesting with loadwatch, let me know. i use it for controlling the
distributed.net clients, but i figure itd be good to control thinks like
crack as well.

crackblock is a daemon that monitors your /var/log/secure for brute-force password crack attempts and ssh login failures.

The rpm should install on any rpm based system and requires iptables, tail, PERL, and PERLs syslog features. All of which are probably already installed on your system.

Password Cracking Library allows you to write own password cracking software.
Main features:
- powerful dictionary attack with word modifiers
- brute force (with or without known chars) attack
- misspelled password recovery, and more
Enhancements:
- Any (european) language and encoding support
- User-defined charsets
- New modifiers, including user-defined conversion tables
- Timing and benchmarking functions
- Any password length

Tournament Pool and Bracket Tracker is a Java Servlet based generic game tournament pool bracket tracking application suitable especially for the NCAA basketball championship tournament.
Features include bracket entering, multiple scoring systems, multiple users, groups, pools, etc.
Tournament Pool and Bracket Tracker contains everything you need to run a tournament pool.
It supports small groups or organizations who wish to provide an NCAA basketball tournament pool without a lot of administrative work in registering users or in calculating up-to-date results and possibilities.
Though it was built with the NCAA "March Madness" tournaments in mind, it should be able to handle other sport tournament pools that use straight forward brackets.
As an administrator, you will first log into the system like any other user. Any user can create a group and aministrate their own pool. A group is a set of players that play together in any number of pools.
Pool adminstrators can choose from many different scoring systems. Scoring systems can be set up dynamically in the database. When you set up a group, you have a choice. Either you can tell the users about the pool, and have them register, then notify you. You would then add the users to the group manually. This keeps membership totally within your control.
However, you can also create an invitation code. Youll then have an link to the system with that invitation code embedded. You can send this link to your users. When they click the link and login (with a possible detour through registration), they will be automatically added to your group.
They can then create their bracket and add it to a pool without your direct involvement. You do risk that the email gets circulated to others and people you dont intend to enter your group do.
Players can create as many brackets as they like, name them, leave them unfinished, come back to them later, etc. Players can add a bracket to a pool once the bracket is finished either from the bracket interface page or from the pool interface page.
Once a tournament is underway, users can keep track of their progress as the administrator for a tournament updates the results of games. Tournaments results are updated by the administrator with the same interface players use to enter their brackets.
Players are prevented from editing their brackets once it has been added to a pool that has a tournament underway. Tournament administrators can delegate the duty of keeping game results up to date to others if they arent going to be around for some of the games via a simple interface.
This allows players to come into the system regularly during the tournament and check their results and the standings much quicker than your typical spreadsheet based systems. If something is updated wrong, the players will keep you honest. The results show current, remaining, and maximum available points.
Any user can inspect the other players brackets in the pool. The brackets are presented with good picks in the green and bad picks in the red.
Version restrictions:
- Right now, all of the bracket, tournament, and teams setup is done via SQL scripts. I typically am working on the scripts the night they are announced. The priority list for the user interface work so far has been first to make the player experience nice, second to make the in-tournament administration nice, and only third to make the tournament setup nice. Hopefully by the time March 2006 rolls around this third area will be improved.
- At this point the bracket system wont handle highest seed meets lowest seed type of brackets. Unfortunately, this rules out using this system for the NFL Playoffs for the time being. Ive been working on this, but it is hard nut to crack.
Installation:
- Install MySQL and Tomcat
- Put the tournament.war file in the tomcat webapps folder.
- To get the database ready, run the following commands from the mysql.exe tool in the following order:
. [path]configdb.sql
. [path]configncaa.sql
. [path]configncaa-teams.sql
. [path]configncaa-2004.sql (optional)
. [path]configacc.sql (optional)
. [path]configacc-2005.sql (optional)
. [path]configncaa-2005.sql
You need to grant privileges in mysql as well:
GRANT ALL PRIViLEGES ON *.* TO testuser@localhost
IDENTIFIED BY testpw WITH GRANT OPTION;
Make some tweaks to the [tomcat home]/conf/web.xml file. Uncomment the following:
< !-- The invoker servlet -->
< servlet>
< servlet-name>invoker
< servlet-class>
org.apache.catalina.servlets.InvokerServlet
< /servlet-class>
< init-param>
< param-name>debug
< param-value>0
< /init-param>
< load-on-startup>2
< /servlet>
and
< !-- The mapping for the invoker servlet -->
< servlet-mapping>
< servlet-name>invoker
< url-pattern>/servlet/*
< /servlet-mapping>
This enables the autoinvoker servlet, which maps from URLs to class names which happen to be J2EE servlet classes. Some people consider this a security risk, which is why it is disabled by default. Ive never had an issue so long as I know all of the servlet classes I have in the system. This can be changed. If you consider it an issue, let me know via a feature request.
- Start MySQL and Tomcat
- Go to http://localhost:8080/tournament/
Enhancements:
- This release adds many new options for the tournament pool administrator.
- You can do tie breakers, not show the players brackets to each other until the tournament starts, limit the number of brackets per player, and run a pool starting later in a tournament, such as starting at the Sweet 16.
- There is also a new interface for setting the start date and time of the tournament, sorting enhancements, the ability to edit pool settings, ranking the brackets of a running pool, and players may reset their passwords.

Ophcrack is a Windows password cracker based on rainbow tables. It is a very efficient implementation of rainbow tables done by the inventors of the method.
The project comes with a GTK+ Graphical User Interface and runs on Windows, Mac OS X (Intel CPU) as well as on Linux.
Main features:
- Runs on Windows, Linux and Mac OS X (intel).
- Cracks LM and NTLM hashes.
- Free tables available for alphanumeric LM hashes.
- Loads hashes from local SAM, remote SAM.
- Loads hashes from encrypted SAM recovered from a Windows partition.
The ophcrack LiveCD contains a full linux system (SLAX), ophcrack for linux and rainbow tables for alphanumerical passwords.
The liveCD cracks passwords automatically, no installation necessary, no admin passwort necessary (as long as you can boot from cd).
Enhancements:
- Vista support with the latest version of ophcrack (2.3.4)
- Easier to changes tables

This is a fast and simple, yet hard to crack encryption program. It uses XOR encryption with variable key, based on the password that user inputs to the program, it rumbles bits in the bytes, etc.

The newer versions have an extra 7bit coding, so that it is usable inside the XML (it is to be used inside the QtBaza in the next release), and that doubles the size of the file. The program is written using ANSI C and should run on all OSs that have a C compiler (UNIXes, Windows, MacOS, VMS, ...).