Free mrtg ping probe 2.2.0 software for linux

mrtg-ping-probe project monitors round trip time and packet loss to another host. Still on my TODO list: add own min/max/avg rtt calculation, add perl ping module, add rping and rsh support...
mrtg-ping-probe is a ping probe for MRTG 2.x. It is used to monitor the round trip time and packet loss to networked devices. MRTG uses its output to generate graphs visualizing minimum and maximum round trip times or packet loss.
mrtg-ping-probe depends on the following software being installed on your system: perl (at least version 5.6.1), mrtg (I use version 2.8.8, though any mrtg 2.x version should work), and a ping program that displays a summary of the round trip times upon termination or timeout.
mrtg-ping-probe runs on AIX, BSD/OS 2.1, FreeBSD/2.2.x, IRIX/6.2, Linux, Mac OS X (Darwin 5.4), NetBSD, OpenBSD, OS/2, OSF1 V3.2, Solaris 1.1.2 (SunOS 4.1.4), Solaris 2.5.1 (SunOS 5.5.1), Solaris 7 (SunOS 5.7), Solaris 8 (SunOS 5.8), Solaris 9 (SunOS 5.9), HP-UX 9, Windows 98, and Windows 2000 (english, french, portugesee, and spanish locales).
If you install the Windows ping program that comes with Windows 98, Windows 2000, or WinSock 2.x, mrtg-ping-probe will also run on Windows 95 and Windows 4.0.
Support for additional systems is usually easy to add, as described in the file INSTALL.
Act responsible: do not use mrtg-ping-probe to ping devices without the owners permission. Just imagine 10,000 people would decide to ping your hosts ... mrtg-ping-probe is meant to be used within your network to get round trip time performance figures for your network.
Usage: mrtg-ping-probe [-hsvV] [-d deadtime] [-k count] [-l length] [-o ping_options] [-p [factor*]{min|max|avg|loss|integer}/[factor*]{min|max|avg|loss|integer}] [-r [rsh:][user@]host[:osname]] [-t timeout] host
Enhancements:
- new platforms supported: italian Windows 2000 locale.
- bugfixes: on Windows actually return deadtime when we lost all packets, not 0. the ping child process should actually be killed now on Unix platforms.
- changes: ***** Possible Incompatability ***** raised minimum required perl version to 5.6.1. lots of typos fixed.

mrtg-ntap-probe can probe for Network Appliance NetCache caching appliance and NetApp Filer.

mrtg-ntap-probe retrieves the disk and file (inode) utilization by volume or quota tree name, so you do not need to find the right OID, which might change over time as you add and/or remove volumes and quota trees.

You need a recent release of mrtg 2.x, perl 5.003 or better, a NetApp NetCache appliance with NetCache release 5.1 or better and/or a Network Appliance Filer running Data Ontap 6.0 or better.

If you have a Network Appliance service contract and access to their software tools library on now.netapp.com, you should also take a look at their mrtg-filer and mrtg-netcache packages!

MRTG-eth-probe provides a probe for the Multi Router Traffic Grapher, generating statistics for network devices that do not support the SNMP protocol. It reads interface stats from /proc/net/dev (or some other file you configure), and generates an output readable for MRTG by parsing the file.
Since the starting of this project MRTG-eth-probe has been downloaded more than 1700 times (as of 2001-11-04). Thanks for this go first of all to Freshmeat for accepting the project and for redirecting so much people to my sourceforge projectpage Additional thanks go to Michael Feger for sending me a patch to 1.5.2 which makes up the most important changes of this release.
Enhancements:
- bugfix: missing dot

pingmon is a small PING monitor, it just pings a server 5 times and displays the results.

Dont really know how usefull it will be to anyone, but here it is!

Change the .theme file to change the labels and the servers... ill try to do some sort of "click to change" thing later.

MRTG::Parse is a Perl extension for parsing and utilizing the logfiles generated by the famous MRTG Tool.

SYNOPSIS

use strict;
use MRTG::Parse;

my $mrtg_logfile = "/var/www/htdocs/mrtg/eth0.log";
my $period = "day";
my $desired_unit = "GB";

my ($traffic_incoming, $traffic_outgoing, $traffic_sum) = mrtg_parse($mrtg_logfile, $period, $desired_unit);

print "Incoming Traffic: $traffic_incomingn";
print "Outgoing Traffic: $traffic_outgoingn";
print "= Sum $traffic_sumn";

This perl extension enables its users to parse and utilize the logfiles that are generated by the famous MRTG (Multi Router Traffic Grapher) tool.

mrtg_parse() takes three argument:

1st: filename of the mrtg logfile
2nd: time period to genereate the output for
valid values are:
- individual time periods like: 20040821-20050130 (ISO 8601)
- static values: day, month, year
3rd: the desired unit (optional)
valid values are:
- B, KB, MB, GB, TB
- if missing mrtg_parse will chose an adequate one for you
mrtg_parse() returns three values:

1st: Incoming traffic
2nd: Outgoing traffic
3rd: Sum of incoming and outgoing

GEOS is a complete C++ implementation of the functions and predicates defined in the OpenGIS "Simple Features for SQL" specification.
GEOS library includes high quality implementations of all the important spatial relationships and operations, robust versions of all functions in the dimensionally extended 9 intersection predicate model, implementations of the operators, Buffer(), Union(), and Intersection(), and all other SFSQL functions including Area(), Length(), Centroid(), etc.
IMPORTANT: GEOS 2.0.0 is not compatible with PostGIS 0.8 or lower. Do not upgrade to GEOS 2.0.0 unless you also upgrade your version of PostGIS at the same time to PostGIS 0.9 or greater.
Enhancements:
- Performance was improved in OverlayOp::insertUniqueEdge(), which improves intersection, union, and buffer.
- Memory management and allocation/deallocation were improved.
- Higher dimension support was implemented for some operations.
- WKB input/output was added.
- A new stable C API was added.

MRTG short from Multi Router Traffic Grapher is a tool to monitor the traffic load on network-links.
Routers are only the beginning. MRTG is being used to graph all sorts of network devices as well as everything else from weather data to vending machines.
MRTG is written in perl and works on Unix/Linux as well as Windows and even Netware systems.
Enhancements:
- SNMVv3 handling was improved.
- Support for SNMPv2/3 devices WITHOUT HC counters was added.
- Indexmaker parsing was made more robust.
- Netware support was updated.