mp3 encoder windows
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 861
LAME MP3 Encoder 3.98.2
Today, LAME is considered the best MP3 encoder at mid-high bitrates and at VBR. more>> LAME development started around mid-1998. Mike Cheng started it as a patch against the 8hz-MP3 encoder sources. After some quality concerns raised by others, he decided to start from scratch based on the dist10 sources. His goal was only to speed up the dist10 sources, and leave its quality untouched. That branch (a patch against the reference sources) became Lame 2.0, and only on Lame 3.81 did we replaced of all dist10 code, making LAME no more only a patch.
The project quickly became a team project. Mike Cheng eventually left leadership and started working on tooLame, an MP2 encoder. Mark Taylor became leader and started pursuing increased quality in addition to better speed. He can be considered the initiator of the LAME project in its current form. He released version 3.0 featuring gpsycho, a new psychoacoustic model he developed.
In early 2003 Mark left project leadership, and since then the project has been lead through the cooperation of the active developers (currently 4 individuals).
Today, LAME is considered the best MP3 encoder at mid-high bitrates and at VBR, mostly thanks to the dedicated work of its developers and the open source licensing model that allowed the project to tap into engineering resources from all around the world. Both quality and speed improvements are still happening, probably making LAME the only MP3 encoder still being actively developed.<<less
Download (1.27MB)
Added: 2009-04-08 License: Freeware Price:
198 downloads
Other version of LAME MP3 Encoder
Today, LAME is considered the best MP3 encoder at mid-high bitrates and at ... Today, LAME is considered the best MP3 encoder at mid-high bitrates and at VBR, mostly thanksLicense:Freeware
KmPg2 MPEG2 Encoder 1.96
KmPg2 is a user friendly MPEG2 encoding wizard that allows the user to create high quality DVD compatible MPEG2 streams. more>>
KmPg2 is a very simple to use MPEG2 encoding wizard that allows the user to create high quality DVD compatible MPEG2 streams, without requiring any technical knowledge.
Creating high quality MPEG2 streams involves a lot more than simply feeding the input video to mpeg2enc/transcode/mencoder/etc.
The input video needs to be carefully prepared by pulling it through a chain of stream processing tools like low-pass filters, color correction filters, static and dynamic chroma and luma noise filters, scalers, and so on.
This processing chain needs to be tuned in such a way that all irrelevant data (like noise) is removed before the video enters the encoder. KmPg2 uses the video processing / encoding tools from the MJPEGTools project to achieve this.
KmPg2 features a profiler that enables the user to interactively create custom pre-processing pipelines that are optimised for a specific type of video material. These preprocessing pipelines (profiles) can be stored and used with the actual encoding wizard.
For example, you could create a profile that is designed especially for restoring a single aging VHS tape, or you could create a profile tuned for your digital camcorder and re-use it for every new recording that needs to be encoded.
At this moment KmPg2 accepts only one format of input video: Raw Sony DV video streams. This is the video format that most people use nowadays for high quality video processing and editing. Support for using AVI files for input is expected in future versions.
Main features:
- Produces DVD compliant MPEG2 streams
- Seperate chroma/luma noise filtering
- Low-Pass filtering support
- Contrast/Brightness/Saturation correction
- White balance correction
- Special black-and-white mode
- Crop image to Widescreen (16:9) or Panavision (2.35:1)
- Output conforms to Rec.601 specifications
- Both constant bitrate and variable bitrate encoding
- Unsharp masking
- Supports progressive and interlaced source material
- Support for removing overscan area
- Provides feedback to user about average/peak bitrates
- Show output on screen while encoding
- Generate encoding shell scripts
- Generate quick preview-encodings of parts of source video
<<lessCreating high quality MPEG2 streams involves a lot more than simply feeding the input video to mpeg2enc/transcode/mencoder/etc.
The input video needs to be carefully prepared by pulling it through a chain of stream processing tools like low-pass filters, color correction filters, static and dynamic chroma and luma noise filters, scalers, and so on.
This processing chain needs to be tuned in such a way that all irrelevant data (like noise) is removed before the video enters the encoder. KmPg2 uses the video processing / encoding tools from the MJPEGTools project to achieve this.
KmPg2 features a profiler that enables the user to interactively create custom pre-processing pipelines that are optimised for a specific type of video material. These preprocessing pipelines (profiles) can be stored and used with the actual encoding wizard.
For example, you could create a profile that is designed especially for restoring a single aging VHS tape, or you could create a profile tuned for your digital camcorder and re-use it for every new recording that needs to be encoded.
At this moment KmPg2 accepts only one format of input video: Raw Sony DV video streams. This is the video format that most people use nowadays for high quality video processing and editing. Support for using AVI files for input is expected in future versions.
Main features:
- Produces DVD compliant MPEG2 streams
- Seperate chroma/luma noise filtering
- Low-Pass filtering support
- Contrast/Brightness/Saturation correction
- White balance correction
- Special black-and-white mode
- Crop image to Widescreen (16:9) or Panavision (2.35:1)
- Output conforms to Rec.601 specifications
- Both constant bitrate and variable bitrate encoding
- Unsharp masking
- Supports progressive and interlaced source material
- Support for removing overscan area
- Provides feedback to user about average/peak bitrates
- Show output on screen while encoding
- Generate encoding shell scripts
- Generate quick preview-encodings of parts of source video
Download (0.068MB)
Added: 2006-06-11 License: GPL (GNU General Public License) Price:
1250 downloads
mp3CONVERT 0.2
mp3CONVERT is a Kommander wizard for easy encoding mp3 songs. more>>
mp3CONVERT is a Kommander wizard for easy encoding mp3 songs. For example, when you need get your favourite album, which has 100mb to the cell phone with 40mb memory.
<<less Download (0.10MB)
Added: 2007-03-23 License: GPL (GNU General Public License) Price:
562 downloads
iPod Video Encoder 1.0.2
iPod Video Encoder is a command line tool for convenient encoding of video files for use on iPod video. more>>
iPod Video Encoder is a command line tool for convenient encoding of video files for use on iPod video. iPod Video Encoder project uses the ffmpeg tool for the actual encoding.
It features recursive encoding of all files in a directory, and generating a podcast.xml file for convenient use in iTunes.
It can be used in a cron job that periodically checks directories for new files and encodes them without user intervention.
Main features:
- Encoding of single files
- Optional specification of a/v bitrates
- Recursively encode all files in a directory
- Generating a podcast.xml for convenient use in iTunes
Options:
--version show programs version number and exit
-h, --help show this help message and exit
-R, --recursive Process directories recusively
-f, --force Force re-encode existing iPod videos
-t, --test Only encode first 10 seconds, to produce test videos
-e EXTENSIONS, --extensions=EXTENSIONS
Comma separated list of input extensions. Default: avi
-i IPODEXT, --ipodext=IPODEXT
iPod extension. Default: .ipod.mp4
-b VIDEO_RATE, --video-rate=VIDEO_RATE
Video bit rate, in kbps (default: 1024)
-a AUDIO_RATE, --audio-rate=AUDIO_RATE
Audio bit rate, in kbps (128)
-W WIDTH, --width=WIDTH
Video width, in pixels (default: 320)
-H HEIGHT, --height=HEIGHT
Video height, in pixels (default: 240)
-P, --pretend Do not really encode, just print out the ffmpeg
commands which would be executed
-v, --verbose Enable verbose output
Podcast options:
-p, --podcast Generate a podcast.xml file for each directory.
--podcast-documentroot=PODCAST_DOCUMENTROOT
Podcast document root; eg. /var/data/Movies/
--podcast-baseurl=PODCAST_BASEURL
Podcast base URL; eg. http://localhost/
Enhancements:
- Only uses the -e option for processing directories.
- The default ipod extension is now _ipod.mp4 for Windows compatibility.
- The README file has been extended with information on the .ipod-encoder settings file.
- The program no longer crashes when HOME is not set on Windows.
- --width and --height parameters have been added.
<<lessIt features recursive encoding of all files in a directory, and generating a podcast.xml file for convenient use in iTunes.
It can be used in a cron job that periodically checks directories for new files and encodes them without user intervention.
Main features:
- Encoding of single files
- Optional specification of a/v bitrates
- Recursively encode all files in a directory
- Generating a podcast.xml for convenient use in iTunes
Options:
--version show programs version number and exit
-h, --help show this help message and exit
-R, --recursive Process directories recusively
-f, --force Force re-encode existing iPod videos
-t, --test Only encode first 10 seconds, to produce test videos
-e EXTENSIONS, --extensions=EXTENSIONS
Comma separated list of input extensions. Default: avi
-i IPODEXT, --ipodext=IPODEXT
iPod extension. Default: .ipod.mp4
-b VIDEO_RATE, --video-rate=VIDEO_RATE
Video bit rate, in kbps (default: 1024)
-a AUDIO_RATE, --audio-rate=AUDIO_RATE
Audio bit rate, in kbps (128)
-W WIDTH, --width=WIDTH
Video width, in pixels (default: 320)
-H HEIGHT, --height=HEIGHT
Video height, in pixels (default: 240)
-P, --pretend Do not really encode, just print out the ffmpeg
commands which would be executed
-v, --verbose Enable verbose output
Podcast options:
-p, --podcast Generate a podcast.xml file for each directory.
--podcast-documentroot=PODCAST_DOCUMENTROOT
Podcast document root; eg. /var/data/Movies/
--podcast-baseurl=PODCAST_BASEURL
Podcast base URL; eg. http://localhost/
Enhancements:
- Only uses the -e option for processing directories.
- The default ipod extension is now _ipod.mp4 for Windows compatibility.
- The README file has been extended with information on the .ipod-encoder settings file.
- The program no longer crashes when HOME is not set on Windows.
- --width and --height parameters have been added.
Download (0.010MB)
Added: 2006-01-20 License: GPL (GNU General Public License) Price:
1379 downloads
MP3 renamer 2006 0.62
Mp3 renamer 2006 by MiKe is a shell script for Linux. more>>
Mp3 renamer 2006 by MiKe is a shell script for Linux. MP3 renamer goes by the Unix name of rename-mp3. It looks at MP3 files in a Directory and, using id3v2, will rename all the mp3 files in a nice format according to the id3 tags rename-mp3 will look at both v1 and v2 id3 tags, and will make the output file in a Title-Album-Artist.mp3 format.
It saves time, and not only will it read the id3 tags, but in the event that the MP3 file has no id3 tags, you will be given 4 options
1)abort 2)skip 3)rename 4)write id3 tags, and you are asked what you would like the id3 tag artist, track name and album to be.
This is great if you want the track to be easy to view and yet you still like having a library of music that is all tagged nicely!
Enhancements:
- New stuff: The INSTALLER now works, whereas before it wouldnt copy...
<<lessIt saves time, and not only will it read the id3 tags, but in the event that the MP3 file has no id3 tags, you will be given 4 options
1)abort 2)skip 3)rename 4)write id3 tags, and you are asked what you would like the id3 tag artist, track name and album to be.
This is great if you want the track to be easy to view and yet you still like having a library of music that is all tagged nicely!
Enhancements:
- New stuff: The INSTALLER now works, whereas before it wouldnt copy...
Download (0.005MB)
Added: 2006-03-22 License: Other/Proprietary License with Source Price:
1317 downloads
Versatile Encoder 0.8p2
Versatile Encoder allows you to encode your own videos into good quality mpeg4 or h264. more>>
Versatile Encoder allows you to encode your own videos into good quality mpeg4 or h264. The input can be a sequence of files (as generated by blender), a file (if you want to recompress something) or a DVD/VCD (if you need to backup some movie).
This piece of software tries to guess good defaults and to help the user in his choices. It works at least under Windows and Linux, the coding platform is Linux.
It should work without a hassle under all BSD variants and probably under MacOSX too, report me if you get it working somewhere else.
<<lessThis piece of software tries to guess good defaults and to help the user in his choices. It works at least under Windows and Linux, the coding platform is Linux.
It should work without a hassle under all BSD variants and probably under MacOSX too, report me if you get it working somewhere else.
Download (0.092MB)
Added: 2006-07-10 License: BSD License Price:
1207 downloads
mp3 CUE cutter 0.4.0
mp3 CUE cutter cuts MP3 files according to a .cue file. more>>
mp3cue cuts an input MP3 file according to the information stored in a .cue file (for example multiple tracks of DJ mix), and writes the output to multiple MP3 files.
poc is a mp3 and ogg streamer supporting following protocols:
HTTP (mp3 and ogg)
RTP (RFC 2250) (mp3 only)
RTP (RFC 3119) (mp3 only)
homegrown FEC protocol (mp3 only)
It should work under any POSIX platform, and does not require any additional library. You need a C99 compiler though.
poc is still beta software, ipv6 and ogg support was not tested extensively.
poc includes mp3cue, a mp3 CUE cutter, and mp3cut, a mp3 command-line editing tool.
<<lesspoc is a mp3 and ogg streamer supporting following protocols:
HTTP (mp3 and ogg)
RTP (RFC 2250) (mp3 only)
RTP (RFC 3119) (mp3 only)
homegrown FEC protocol (mp3 only)
It should work under any POSIX platform, and does not require any additional library. You need a C99 compiler though.
poc is still beta software, ipv6 and ogg support was not tested extensively.
poc includes mp3cue, a mp3 CUE cutter, and mp3cut, a mp3 command-line editing tool.
Download (0.094MB)
Added: 2005-09-28 License: Freely Distributable Price:
979 downloads
web mp3 player for xmms 1.0
web mp3 player for xmms is a simple Web MP3 player based on XMMS and XMMS-Shell. more>>
web mp3 player for xmms is a simple Web MP3 player based on XMMS and XMMS-Shell.
The project is useful if you have a Linux server attached to your stereo/home theater and you want to play MP3s easily via a Web interface.
A little playlist support is included. Important note: it is totally insecure, and should only by used in a limited environment.
<<lessThe project is useful if you have a Linux server attached to your stereo/home theater and you want to play MP3s easily via a Web interface.
A little playlist support is included. Important note: it is totally insecure, and should only by used in a limited environment.
Download (0.005MB)
Added: 2007-05-11 License: GPL (GNU General Public License) Price:
913 downloads
MP3c 0.31
MP3c is a special program for converting audio-cds to mp3/ogg-format. more>>
MP3c is a special program for converting audio-cds to ogg/mp3-format. It is a frontend for every grab-program and mp3-encoder. Nearly every program should be supported. MP3c has two different run-modes: An interactive mode with a menu-enviroment (based on curses-lib), which can used on textconsoles as well under X11, and a batchmode, which allows automatic encoding of cds inside shellscripts (eg at night within cronjobs).
There are two different possibilities for encoding (depends on your ripper and encoder): Non-Fly encoding, where an audio-track is first grabbed from cds and then encoded, and On-Fly encoding, where grabbing and encoding is one step. Normally you should refer to Non-Fly encoding, since your cdrom-drive hasnt to work all the time, and some encoder produces a "click" at the beginning of mp3/ogg-files if On-Fly encoding is used. The only disadvantage of Non-Fly encoding is, that there is a temp-file, which can grow up to 50-100 MB sometimes.
Information about songtitle on your cds are received with help of CDDB database. In contrast to other programs, an CDDB-entry is detailed analyzed to find every information even for sampler-cds.
Creation of filenames is userdefined. You can use pattern to constitute the appearance of your mp3-files individually. Furthermore you can decide how spaces within filenames should be handled (you can allow them, convert them to underscores "_" or just kill them).
Interessting is the possibility of shellscript creation, which contains all functionality for encoding your cds. You can start these scripts as daemon-processes or run them at night inside a cronjob.
Recommended programs for the use of MP3c are: CDparanoia as audio-cd grabber, Encoder as MP3-encoder and MP3info for creating MP3-ID-tags. For OGG use oggenc. If you need, you can download these programs here, or a complete package with these programs inside. Furthermore you can download runable binaries, but only for glibc 2.1 (linux i386) at the moment. If you like to create RPMs and/or binaries for other systems and libraries, please send these to me, so that I can put it on my page.
Enhancements:
- Switched to CDDB protocol level 5 to support detection and saving of year and genre information.
<<lessThere are two different possibilities for encoding (depends on your ripper and encoder): Non-Fly encoding, where an audio-track is first grabbed from cds and then encoded, and On-Fly encoding, where grabbing and encoding is one step. Normally you should refer to Non-Fly encoding, since your cdrom-drive hasnt to work all the time, and some encoder produces a "click" at the beginning of mp3/ogg-files if On-Fly encoding is used. The only disadvantage of Non-Fly encoding is, that there is a temp-file, which can grow up to 50-100 MB sometimes.
Information about songtitle on your cds are received with help of CDDB database. In contrast to other programs, an CDDB-entry is detailed analyzed to find every information even for sampler-cds.
Creation of filenames is userdefined. You can use pattern to constitute the appearance of your mp3-files individually. Furthermore you can decide how spaces within filenames should be handled (you can allow them, convert them to underscores "_" or just kill them).
Interessting is the possibility of shellscript creation, which contains all functionality for encoding your cds. You can start these scripts as daemon-processes or run them at night inside a cronjob.
Recommended programs for the use of MP3c are: CDparanoia as audio-cd grabber, Encoder as MP3-encoder and MP3info for creating MP3-ID-tags. For OGG use oggenc. If you need, you can download these programs here, or a complete package with these programs inside. Furthermore you can download runable binaries, but only for glibc 2.1 (linux i386) at the moment. If you like to create RPMs and/or binaries for other systems and libraries, please send these to me, so that I can put it on my page.
Enhancements:
- Switched to CDDB protocol level 5 to support detection and saving of year and genre information.
Download (0.20MB)
Added: 2006-07-30 License: GPL (GNU General Public License) Price:
1184 downloads
MP3::Find::Base 0.06
MP3::Find::Base is a base class for MP3::Find backends. more>>
MP3::Find::Base is a base class for MP3::Find backends.
SYNOPSIS
package MyFinder;
use base MP3::Find::Base;
sub search {
my $self = shift;
my ($query, $dirs, $sort, $options) = @_;
# do something to find and sort the mp3s...
my @results = do_something(...);
return @results;
}
package main;
my $finder = MyFinder->new;
# see MP3::Find for details about %options
print "$_n" foreach $finder->find_mp3s(%options);
This is the base class for the classes that actually do the searching and sorting for MP3::Find.
<<lessSYNOPSIS
package MyFinder;
use base MP3::Find::Base;
sub search {
my $self = shift;
my ($query, $dirs, $sort, $options) = @_;
# do something to find and sort the mp3s...
my @results = do_something(...);
return @results;
}
package main;
my $finder = MyFinder->new;
# see MP3::Find for details about %options
print "$_n" foreach $finder->find_mp3s(%options);
This is the base class for the classes that actually do the searching and sorting for MP3::Find.
Download (0.029MB)
Added: 2006-11-08 License: Perl Artistic License Price:
1080 downloads
MP3 Diags 0.99.05.029
MP3 Diags offers you a powerful GUI-based application which lets end-users identify issues with their MP3 files, fix some of the issues and make other changes, like adding track information. more>> <<less
Added: 2009-07-26 License: GPL Price: FREE
downloads
MP3::Daemon 0.63
MP3::Daemon is a daemon that possesses mpg123. more>>
MP3::Daemon is a daemon that possesses mpg123.
SYNOPSIS
MP3::Daemon is meant to be subclassed -- not used directly.
package MP3::Daemon::Simple;
use strict;
use vars qw(@ISA);
use MP3::Daemon;
@ISA = qw(MP3::Daemon);
Other perl scripts would use MP3::Daemon::Simple like this:
my $socket_path = "/tmp/mp3d_socket";
# start up a daemon
MP3::Daemon::Simple->spawn($socket_path);
# get a socket thats good for one request to the daemon
my $client = MP3::Daemon::Simple->client($socket_path);
print $client @command;
<<lessSYNOPSIS
MP3::Daemon is meant to be subclassed -- not used directly.
package MP3::Daemon::Simple;
use strict;
use vars qw(@ISA);
use MP3::Daemon;
@ISA = qw(MP3::Daemon);
Other perl scripts would use MP3::Daemon::Simple like this:
my $socket_path = "/tmp/mp3d_socket";
# start up a daemon
MP3::Daemon::Simple->spawn($socket_path);
# get a socket thats good for one request to the daemon
my $client = MP3::Daemon::Simple->client($socket_path);
print $client @command;
Download (0.025MB)
Added: 2006-11-08 License: Perl Artistic License Price:
1084 downloads
PicoStreamer 2.2
PicoStreamer is a complete server for live audio/video streaming. more>>
PicoStreamer is a complete server for live audio/video streaming. It can stream MP3, AAC, and video live using Flash FLV. PicoStreamer does not require any Flash server. It only needs a Web server with Perl and PHP. It requires neither expensive dedicated servers nor compilation on the target machine.
A source client (for Win32) is included. A management/playing framework written in PHP makes PicoStreamer simple to use. The PicoIcy component acts as a local shoutcast server emulator, so you can use your preferred shoutcast source client to stream or stream Flash format directly from the Web.
Enhancements:
- Added live flash audio/video streaming support.
- Added Flash encoder.
- Added Flash player also for mp3.
- Added Brasilian (PT) language.
- Added dynamic playlist chooser.
- Added content-length managing.
- PicoIcy now in tray-bar.
- Fixed list blocking on weird chars.
- Removed php ctype_digits dependence.
- Removed perl html::entitites dependence.
- Fixed many minor bugs.
<<lessA source client (for Win32) is included. A management/playing framework written in PHP makes PicoStreamer simple to use. The PicoIcy component acts as a local shoutcast server emulator, so you can use your preferred shoutcast source client to stream or stream Flash format directly from the Web.
Enhancements:
- Added live flash audio/video streaming support.
- Added Flash encoder.
- Added Flash player also for mp3.
- Added Brasilian (PT) language.
- Added dynamic playlist chooser.
- Added content-length managing.
- PicoIcy now in tray-bar.
- Fixed list blocking on weird chars.
- Removed php ctype_digits dependence.
- Removed perl html::entitites dependence.
- Fixed many minor bugs.
Download (0.33MB)
Added: 2006-12-26 License: GPL (GNU General Public License) Price:
1135 downloads
Lien Mp3 Player 0.6.2b
Lien Mp3 Player is an MP3/Audio CD player with high quality sound output. more>>
Lien Mp3 Player is a mp3 and audio cd player for GNU Linux console.
All you need is a Pentium 90 or faster computer (you can do mono output if you have slower computer), GNU Library 2.0 or above and ncurses 5.
The project was improved many many times by recommendation of users. Now it is even better than the one I have plan to do in the first place.
Main features:
- Fast Mp3 Decoding
- Excellent quality sound playback
- File Menu for easier file selection
- Playlist support
- Playlist Randomizing
- Fast Forward, Back To Beginning, Previous Song and Next Song key
- Endless Looping
- Play Audio CD Track
Enhancements:
- Makefile enhancements.
<<lessAll you need is a Pentium 90 or faster computer (you can do mono output if you have slower computer), GNU Library 2.0 or above and ncurses 5.
The project was improved many many times by recommendation of users. Now it is even better than the one I have plan to do in the first place.
Main features:
- Fast Mp3 Decoding
- Excellent quality sound playback
- File Menu for easier file selection
- Playlist support
- Playlist Randomizing
- Fast Forward, Back To Beginning, Previous Song and Next Song key
- Endless Looping
- Play Audio CD Track
Enhancements:
- Makefile enhancements.
Download (0.11MB)
Added: 2007-07-24 License: GPL (GNU General Public License) Price:
831 downloads
mpegrec 1.0
mpegrec is a FREE, Open Source command-line tool for recording audio on Windows and Linux. more>>
mpegrec is a FREE, Open Source command-line tool for recording audio on Windows and Linux. It may be used to record direct-to-disk WAV files, and MP3 files. MP3 encoding requires an external MP3 encoder such as the lame encoder. Other encoders can be used with minimal changes to the source code.
Unlike other WAV recorders available online, mpegrec is free -- even on Windows. (MP3 encoding may require a licensed encoder.) The command-line inteface is easy to use -- easy enough you will not miss a silly GUI. If you have an audio card capable of hardware-mpeg encoding, mpegrec for Windows can utilize the cards features for direct-to-disk MP3 recording.
NOTE: mpegrec on Linux is slightly dated and may require porting to newer kernels. If you port mpegrec feel free to share it in accordance with the GNU GPL license. If you can make the package small enough, I will consider posting it here.
To install wavrec and mpegrec simply type make at the shell:
make
To install wavrec and a sym-link for mpegrec type make install:
make install
<<lessUnlike other WAV recorders available online, mpegrec is free -- even on Windows. (MP3 encoding may require a licensed encoder.) The command-line inteface is easy to use -- easy enough you will not miss a silly GUI. If you have an audio card capable of hardware-mpeg encoding, mpegrec for Windows can utilize the cards features for direct-to-disk MP3 recording.
NOTE: mpegrec on Linux is slightly dated and may require porting to newer kernels. If you port mpegrec feel free to share it in accordance with the GNU GPL license. If you can make the package small enough, I will consider posting it here.
To install wavrec and mpegrec simply type make at the shell:
make
To install wavrec and a sym-link for mpegrec type make install:
make install
Download (0.042MB)
Added: 2006-07-18 License: GPL (GNU General Public License) Price:
1194 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above mp3 encoder windows search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
