message queuing
Sponsored Links
Sponsored Links
Secleted [ 0 ] software to compare
Results 1 - 15 of about 2577
X Message Daemon 0.6.5
X Message Daemon is used to overlay graphical information messages on your X display. more>>
X Message Daemon is used to overlay graphical information messages on your X display.
You can choose parameters such as color, font, icon, and duration.
It also has a frontend Perl daemon and client.
Installing:
# ./configure
# make
# make install
then edit /usr/local/share/Xmsgd/etc/msgmaild.conf and change the configuration to your preferences.
Basic Usage:
- tailing your /var/log/messages :
# tail -f /var/log/messages | msgclient.pl &
<<lessYou can choose parameters such as color, font, icon, and duration.
It also has a frontend Perl daemon and client.
Installing:
# ./configure
# make
# make install
then edit /usr/local/share/Xmsgd/etc/msgmaild.conf and change the configuration to your preferences.
Basic Usage:
- tailing your /var/log/messages :
# tail -f /var/log/messages | msgclient.pl &
Download (MB)
Added: 2006-09-26 License: GPL (GNU General Public License) Price:
1124 downloads
Secure Messaging 1.0
Secure Messaging is a Web-based, alternative mail system for sending and receiving messages. more>>
Secure Messaging is a Web-based, alternative mail system for sending and receiving messages.
Use secure messaging to send and receive messages from a alternative web-based mail system. Using the secure messaging system no actual mail is transmitted through any 3rd party servers.
Only an optional message notice is sent to the recepient, the user needs to visit the site in order to read the message.
Normal SMTP mail can hit multiple servers and can possibly be read, stored, or changed anywhere within the process.
Setup secure messaging on an SSL enabled website to enhance the privacy even more.
<<lessUse secure messaging to send and receive messages from a alternative web-based mail system. Using the secure messaging system no actual mail is transmitted through any 3rd party servers.
Only an optional message notice is sent to the recepient, the user needs to visit the site in order to read the message.
Normal SMTP mail can hit multiple servers and can possibly be read, stored, or changed anywhere within the process.
Setup secure messaging on an SSL enabled website to enhance the privacy even more.
Download (0.15MB)
Added: 2005-10-20 License: GPL (GNU General Public License) Price:
1466 downloads
Wily::Message 0.02
Wily::Message is a Perl extension to handle Wily Messages. more>>
Wily::Message is a Perl extension to handle Wily Messages.
SYNOPSIS
use Wily::Message;
use Wily::Connect;
# opens a file in wily and exits when the window is destroyed
my $win_id;
my $ws = Wily::Connect::connect();
my $wm = Wily::Message->new(Wily::Message::WMnew, 0, 0, 0, 1,
/tmp/file_to_edit);
$ws->syswrite($wm->flatten());
my $buffer = ;
until (Wily::Message::complete_message($buffer)) {
$ws->sysread($buffer, 1024, length($buffer));
}
$buffer = $wm->from_string($buffer);
if ($wm->{type} == Wily::Message::WRerror) {
die "Error WMnew: $wm->{s}n";
} elsif ($wm->{type} == Wily::Message::WRnew) {
$win_id = $wm->{window_id};
$wm = Wily::Message->new(Wily::Message::WMattach, $win_id, 0, 0,
Wily::Message::WEdestroy);
$ws->syswrite($wm->flatten());
until (Wily::Message::complete_message($buffer)) {
$ws->sysread($buffer, 1024, length($buffer));
}
$buffer = $wm->from_string($buffer);
if ($wm->{type} == Wily::Message::WRerror) {
die "Error WMattach: $wm->{s}n";
} elsif ($wm->{type} == Wily::Message::WRattach) {
} else {
die "Expected a WRattach, but didnt get one";
}
} else {
die "Expected a WRnew, but didnt get one";
}
while (1) {
until (Wily::Message::complete_message($buffer)) {
$ws->sysread($buffer, 1024, length($buffer));
}
$buffer = $wm->from_string($buffer);
if ($wm->{type} == Wily::Message::WEdestroy and $wm->{window_id} == $win_id) {
last;
}
}
A simple object wrapper around Wily messages with a helper function to assist in extracting messages from the wily connection.
<<lessSYNOPSIS
use Wily::Message;
use Wily::Connect;
# opens a file in wily and exits when the window is destroyed
my $win_id;
my $ws = Wily::Connect::connect();
my $wm = Wily::Message->new(Wily::Message::WMnew, 0, 0, 0, 1,
/tmp/file_to_edit);
$ws->syswrite($wm->flatten());
my $buffer = ;
until (Wily::Message::complete_message($buffer)) {
$ws->sysread($buffer, 1024, length($buffer));
}
$buffer = $wm->from_string($buffer);
if ($wm->{type} == Wily::Message::WRerror) {
die "Error WMnew: $wm->{s}n";
} elsif ($wm->{type} == Wily::Message::WRnew) {
$win_id = $wm->{window_id};
$wm = Wily::Message->new(Wily::Message::WMattach, $win_id, 0, 0,
Wily::Message::WEdestroy);
$ws->syswrite($wm->flatten());
until (Wily::Message::complete_message($buffer)) {
$ws->sysread($buffer, 1024, length($buffer));
}
$buffer = $wm->from_string($buffer);
if ($wm->{type} == Wily::Message::WRerror) {
die "Error WMattach: $wm->{s}n";
} elsif ($wm->{type} == Wily::Message::WRattach) {
} else {
die "Expected a WRattach, but didnt get one";
}
} else {
die "Expected a WRnew, but didnt get one";
}
while (1) {
until (Wily::Message::complete_message($buffer)) {
$ws->sysread($buffer, 1024, length($buffer));
}
$buffer = $wm->from_string($buffer);
if ($wm->{type} == Wily::Message::WEdestroy and $wm->{window_id} == $win_id) {
last;
}
}
A simple object wrapper around Wily messages with a helper function to assist in extracting messages from the wily connection.
Download (0.021MB)
Added: 2007-02-27 License: Perl Artistic License Price:
969 downloads
ebXML::Message 0.03
ebXML::Message is a Perl module to encapsulate an ebMS message. more>>
ebXML::Message is a Perl module to encapsulate an ebMS message.
SYNOPSIS
use ebXML::Message;
# create new message
my $message = ebXML::Message->new
(
CPAId => http://www.you.org/cpa/123456,
Action => NewPurchaseOrder,
MessageId => 12,
RefMessageToId => 11,
Service => ebXML::Message::Service->new
(
VALUE => QuoteToCollect,
Type => myservicetypes,
),
);
# write SOAP XML using DOM
use XML::Xerses;
# DOM Document
my $target = XML::Xerces::StdOutFormatTarget->new();
$writer->writeNode($target,$message->getOutput(DOM-Doc);
# DOM generated / munged XML
print OUT $message->getOutput(DOM-XML);
# use message with SOAP::Lite to call webservice
use SOAP::Lite;
# SOAP::Data::Builder object
my $result = SOAP::Lite->uri(http://uri.to/WebService)
->proxy(http://uri.to/soap.cgi)
->parts($message->getMIMEParts)
->call($message->getOutput(SOAP-Data))
->result;
# SOAP::Data::Builder generated / munged XML
print OUT $message->getOutput(SOAP-XML);
An ebXML message encapsulates all the details of an ebMS message.
ebXML is a mechanism for ensuring reliable delivery of XML-based messages via a transport mechanism such as SOAP. For more details on ebXML, see http://www.ebxml.org/
Large portions of this manual page are copied directly from the ebMS 2.0 specification.
<<lessSYNOPSIS
use ebXML::Message;
# create new message
my $message = ebXML::Message->new
(
CPAId => http://www.you.org/cpa/123456,
Action => NewPurchaseOrder,
MessageId => 12,
RefMessageToId => 11,
Service => ebXML::Message::Service->new
(
VALUE => QuoteToCollect,
Type => myservicetypes,
),
);
# write SOAP XML using DOM
use XML::Xerses;
# DOM Document
my $target = XML::Xerces::StdOutFormatTarget->new();
$writer->writeNode($target,$message->getOutput(DOM-Doc);
# DOM generated / munged XML
print OUT $message->getOutput(DOM-XML);
# use message with SOAP::Lite to call webservice
use SOAP::Lite;
# SOAP::Data::Builder object
my $result = SOAP::Lite->uri(http://uri.to/WebService)
->proxy(http://uri.to/soap.cgi)
->parts($message->getMIMEParts)
->call($message->getOutput(SOAP-Data))
->result;
# SOAP::Data::Builder generated / munged XML
print OUT $message->getOutput(SOAP-XML);
An ebXML message encapsulates all the details of an ebMS message.
ebXML is a mechanism for ensuring reliable delivery of XML-based messages via a transport mechanism such as SOAP. For more details on ebXML, see http://www.ebxml.org/
Large portions of this manual page are copied directly from the ebMS 2.0 specification.
Download (0.014MB)
Added: 2006-09-13 License: Perl Artistic License Price:
1136 downloads
Debug::Message 1.00
Debug::Message is a Perl module that eases the use of debug print with level, indentation and color. more>>
Debug::Message is a Perl module that eases the use of debug print with level, indentation and color.
SYNOPSIS
use Debug::Message;
use Log::Dispatch;
use Log::Dispatch::Screen;
my $dispatcher = Log::Dispatch->new;
$dispatcher->add( Log::Dispatch::Screen->new( name => screen,
min_level => 0 ));
my $info = Debug::Message->new(1);
$info->add_dispatcher($dispatcher);
$info->print("print");
$info->yellow("warn");
$info->red("err");
$info->printcn("error message", bold red);
my $critical = Debug::Message->new(5);
$critical->add_dispatcher($dispatcher);
$critical->redn("err");
For disabling the debugging simply do not attach any dispatchers.
$critical->disable; # Will detach the attached backend
There was no module for simple debug messages supporting debug/verbosity levels and indentation. So this is the one, that is supposed to take this place.
This module is an art of frontend to Log::Dispatch as Log::Dispatch itself supports levels, but no colors and the functions calling is tedious.
There are some methods defined. Each outputs a different color, optionally it can add a newline after the messaage. They dispatch the messages to all added dispatchers, but generaly only one will be needed as the Log::Dispatch itself can have more backends.
<<lessSYNOPSIS
use Debug::Message;
use Log::Dispatch;
use Log::Dispatch::Screen;
my $dispatcher = Log::Dispatch->new;
$dispatcher->add( Log::Dispatch::Screen->new( name => screen,
min_level => 0 ));
my $info = Debug::Message->new(1);
$info->add_dispatcher($dispatcher);
$info->print("print");
$info->yellow("warn");
$info->red("err");
$info->printcn("error message", bold red);
my $critical = Debug::Message->new(5);
$critical->add_dispatcher($dispatcher);
$critical->redn("err");
For disabling the debugging simply do not attach any dispatchers.
$critical->disable; # Will detach the attached backend
There was no module for simple debug messages supporting debug/verbosity levels and indentation. So this is the one, that is supposed to take this place.
This module is an art of frontend to Log::Dispatch as Log::Dispatch itself supports levels, but no colors and the functions calling is tedious.
There are some methods defined. Each outputs a different color, optionally it can add a newline after the messaage. They dispatch the messages to all added dispatchers, but generaly only one will be needed as the Log::Dispatch itself can have more backends.
Download (0.004MB)
Added: 2007-05-01 License: Perl Artistic License Price:
906 downloads
Message::Style 0.002
Message::Style is a Perl module to perform stylistic analysis of messages. more>>
Message::Style is a Perl module to perform stylistic analysis of messages.
SYNOPSIS
use Message::Style;
my $score=Message::Style::score(@article);
# or
my $score=Message::Style::score(@article);
This Perl library does an analysis of a RFC2822 format message (typically email messages or Usenet posts) and produces a score that, in the authors opinion, gives a good indication as to whether the poster is a fsckwit, and therefore whether their message should be ignored.
<<lessSYNOPSIS
use Message::Style;
my $score=Message::Style::score(@article);
# or
my $score=Message::Style::score(@article);
This Perl library does an analysis of a RFC2822 format message (typically email messages or Usenet posts) and produces a score that, in the authors opinion, gives a good indication as to whether the poster is a fsckwit, and therefore whether their message should be ignored.
Download (0.005MB)
Added: 2006-08-29 License: Perl Artistic License Price:
1153 downloads
Putmail Queue 0.2
Putmail Queue provides a queuing system for putmail.py from the Putmail project. more>>
Putmail Queue provides a queuing system for putmail.py from the Putmail project.
It allows you to compose your email messages offline, keep them in a queue, and send them all together later.
This is my first try at providing a queuing system for putmail.py. Inside, youll find two programs: putmail_enqueue.py and putmail_dequeue.py.
To use them, you must first create the directory $HOME/.putmail/queue/. Its recommended that only you have access to it.
Install the program by running install.sh as root if necessary. Optionally, edit the file first to specify destination directories.
Usage instructions are in the man page. Use "man putmail-queue" to read it. It is a recommended one-time read.
<<lessIt allows you to compose your email messages offline, keep them in a queue, and send them all together later.
This is my first try at providing a queuing system for putmail.py. Inside, youll find two programs: putmail_enqueue.py and putmail_dequeue.py.
To use them, you must first create the directory $HOME/.putmail/queue/. Its recommended that only you have access to it.
Install the program by running install.sh as root if necessary. Optionally, edit the file first to specify destination directories.
Usage instructions are in the man page. Use "man putmail-queue" to read it. It is a recommended one-time read.
Download (0.005MB)
Added: 2006-09-06 License: MIT/X Consortium License Price:
1144 downloads
Kopete Away Message Updater 0.2
Kopete Away Message Updater is a script that updates your away message in Kopete messeger. more>>
Call this script from the Autostart folder, and it will update Kopetes away message for each interval (requires Kopete 0.12 or higher). The away messages are by default defined in ~/.kopete-away-msgs. Each line can contain either:
- a comment (starting with a #)
- flags message
The flags define some properties to each away message. Flags are defined only at the start of the line, beginning and ending with a %. The following flags are supported.
[0-9]*[smhd] Determines how long this message should be shown before a new one is chosen. This is the sleep(1) syntax.
a Only show this message when youre away.
c This line is a command, use its output as away message.
i Show the contents of a file, line by line. The message should contain the path to the file. Do not use ~ but use /home/$USER instead. Empty lines in the included file are skipped.
n Use the next message in the file for the next iteration.
o Only show this message when youre online.
x Dont use this message when looking for a random message. This means this line is only accessible when the former line contains the n flag.
- Show the message less than normal times
-- Show the message even more less
--- Show the message sometimes
To determine your online status, you need to have the Web Presence plugin enabled. By default, it reads the file ~/.webstatus.xml. Adapt the variable below if you store the file somewhere else. The script wont do anything when youre offline or partially away (that is, some protocols are Away, some protocols are Online).
Because the web status plugin is used, the process of retrieving the current webstatus is not really reliable. It may happen that you turn back to online when you set the status on Away in a short time. If this doesnt happen in about 10 seconds after the status change, you may consider the status change as successful.
Example ~/.kopete-away-msgs file:
========================================================================
# Sometimes, show uptime for one minute
%1mc--% uptime
# Fortune rocks, but dont pick too long messages (the length of away
# messages is limited.
%2mc% fortune -s -n 120
# just show Hello world for the default interval
Hello world
# Show a away message for 60 seconds.
%a60% Im away now.
# Ask people to say something when youre online
%o% Please message me!
# Show all contents of the Linux README line by line. Show each line for
# 3 seconds.
%3i% /usr/src/linux/README
# Tell a little story when Im away. These lines must emerge in the
# right order, so mind the n and x flags! The x flags make sure we dont
# start in the middle of the story. And, show each line for about 5
# seconds.
%na5% Goodbye, all you people,
%nax5% Theres nothing you can say
%nax5% To make me change my mind.
%ax5% Goodbye.
==================================================================
Enhancements:
- Ability to query the online/away status directly from Kopete (DCOP). This requires a patched Kopete, see the description for more details on how to proceed.
- Fortune mode: Pick a random line from a given text file.
- First check the online/away status to prevent unnecessary command calls.
- Various bugfixes
<<less- a comment (starting with a #)
- flags message
The flags define some properties to each away message. Flags are defined only at the start of the line, beginning and ending with a %. The following flags are supported.
[0-9]*[smhd] Determines how long this message should be shown before a new one is chosen. This is the sleep(1) syntax.
a Only show this message when youre away.
c This line is a command, use its output as away message.
i Show the contents of a file, line by line. The message should contain the path to the file. Do not use ~ but use /home/$USER instead. Empty lines in the included file are skipped.
n Use the next message in the file for the next iteration.
o Only show this message when youre online.
x Dont use this message when looking for a random message. This means this line is only accessible when the former line contains the n flag.
- Show the message less than normal times
-- Show the message even more less
--- Show the message sometimes
To determine your online status, you need to have the Web Presence plugin enabled. By default, it reads the file ~/.webstatus.xml. Adapt the variable below if you store the file somewhere else. The script wont do anything when youre offline or partially away (that is, some protocols are Away, some protocols are Online).
Because the web status plugin is used, the process of retrieving the current webstatus is not really reliable. It may happen that you turn back to online when you set the status on Away in a short time. If this doesnt happen in about 10 seconds after the status change, you may consider the status change as successful.
Example ~/.kopete-away-msgs file:
========================================================================
# Sometimes, show uptime for one minute
%1mc--% uptime
# Fortune rocks, but dont pick too long messages (the length of away
# messages is limited.
%2mc% fortune -s -n 120
# just show Hello world for the default interval
Hello world
# Show a away message for 60 seconds.
%a60% Im away now.
# Ask people to say something when youre online
%o% Please message me!
# Show all contents of the Linux README line by line. Show each line for
# 3 seconds.
%3i% /usr/src/linux/README
# Tell a little story when Im away. These lines must emerge in the
# right order, so mind the n and x flags! The x flags make sure we dont
# start in the middle of the story. And, show each line for about 5
# seconds.
%na5% Goodbye, all you people,
%nax5% Theres nothing you can say
%nax5% To make me change my mind.
%ax5% Goodbye.
==================================================================
Enhancements:
- Ability to query the online/away status directly from Kopete (DCOP). This requires a patched Kopete, see the description for more details on how to proceed.
- Fortune mode: Pick a random line from a given text file.
- First check the online/away status to prevent unnecessary command calls.
- Various bugfixes
Download (0.011MB)
Added: 2007-01-14 License: GPL (GNU General Public License) Price:
1015 downloads
THCNET Message System 1.1.0.1
THCNET Message System project is a customizable PHP-enabled Web application. more>>
THCNET Message System project is a customizable PHP-enabled Web application which provides a moderated message system using a backend MySQL database.
Installation
download and install MySQL. download and install apache with mod_rewrite
and php4 or php5 compiled with the pspell libraries.
note: I use MySQL 5.0 and PHP 5.1 in development of THCNET, but it should
work with earlier versions.
do the following
modify the *.template *.css files to make things look how you want
modify the any and all source code as you see fit.
As of release 1.0.pre5 thcnet has an auto-installer/revision control
feature that makes the initial setup much easier.
copy all the files into your htdocs directory on your web server
open index.php in your browser. It will prompt you for values it needs
to perform the installation. Click on setup and it will create the
database for you and populate it.
Now that you have THCNET setup, the first task will be to apply as a new
user. The first user to apply will be given sys-admin rights.
Now you can customize features by clicking on the Admin link to the
left.
Enhancements:
- This release adds the ability to further control the system based on policy maps.
<<lessInstallation
download and install MySQL. download and install apache with mod_rewrite
and php4 or php5 compiled with the pspell libraries.
note: I use MySQL 5.0 and PHP 5.1 in development of THCNET, but it should
work with earlier versions.
do the following
modify the *.template *.css files to make things look how you want
modify the any and all source code as you see fit.
As of release 1.0.pre5 thcnet has an auto-installer/revision control
feature that makes the initial setup much easier.
copy all the files into your htdocs directory on your web server
open index.php in your browser. It will prompt you for values it needs
to perform the installation. Click on setup and it will create the
database for you and populate it.
Now that you have THCNET setup, the first task will be to apply as a new
user. The first user to apply will be given sys-admin rights.
Now you can customize features by clicking on the Admin link to the
left.
Enhancements:
- This release adds the ability to further control the system based on policy maps.
Download (0.37MB)
Added: 2007-06-11 License: GPL (GNU General Public License) Price:
865 downloads
queue-admin 1.0
queue-admin provides a shell script for managing the mail queue of the qmail MTA. more>>
queue-admin provides a shell script for managing the mail queue of the qmail MTA.
queue-admin is a bash2 shell script for managing the mail queue of the qmail MTA.
It can provide a summarized list of the messages in the queue, optionally filtered by number or by whether a message is local or remote.
The messages themselves can be listed, viewed, or deleted by the same criteria.
It can also search for expressions within the messages, and can return the entire email or only the line where the expression was found.
The output is colorized.
<<lessqueue-admin is a bash2 shell script for managing the mail queue of the qmail MTA.
It can provide a summarized list of the messages in the queue, optionally filtered by number or by whether a message is local or remote.
The messages themselves can be listed, viewed, or deleted by the same criteria.
It can also search for expressions within the messages, and can return the entire email or only the line where the expression was found.
The output is colorized.
Download (0.002MB)
Added: 2007-04-10 License: GPL (GNU General Public License) Price:
931 downloads
Mail::Message::Body 2.065
Mail::Message::Body is the data of a body in a message. more>>
Mail::Message::Body is the data of a body in a message.
INHERITANCE
Mail::Message::Body has extra code in
Mail::Message::Body::Construct
Mail::Message::Body::Encode
Mail::Message::Body
is a Mail::Reporter
Mail::Message::Body is extended by
Mail::Message::Body::File
Mail::Message::Body::Lines
Mail::Message::Body::Multipart
Mail::Message::Body::Nested
Mail::Message::Body::String
Mail::Message::Body is realized by
Mail::Message::Body::Delayed
SYNOPSIS
my Mail::Message $msg = ...;
my $body = $msg->body;
my @text = $body->lines;
my $text = $body->string;
my IO::Handle $file = $body->file;
$body->print(*FILE);
my $content_type = $body->type;
my $transfer_encoding = $body->transferEncoding;
my $encoded = $body->encode(mime_type => text/html,
charset => us-ascii, transfer_encoding => none);n";
my $decoded = $body->decoded;
The encoding and decoding functionality of a Mail::Message::Body is implemented in the Mail::Message::Body::Encode package. That package is automatically loaded when encoding and decoding of messages needs to take place. Methods to simply build an process body objects are implemented in Mail::Message::Body::Construct.
The body of a message (a Mail::Message object) is stored in one of the many body types. The functionality of each body type is equivalent, but there are performance differences. Each body type has its own documentation with details about its implementation.
<<lessINHERITANCE
Mail::Message::Body has extra code in
Mail::Message::Body::Construct
Mail::Message::Body::Encode
Mail::Message::Body
is a Mail::Reporter
Mail::Message::Body is extended by
Mail::Message::Body::File
Mail::Message::Body::Lines
Mail::Message::Body::Multipart
Mail::Message::Body::Nested
Mail::Message::Body::String
Mail::Message::Body is realized by
Mail::Message::Body::Delayed
SYNOPSIS
my Mail::Message $msg = ...;
my $body = $msg->body;
my @text = $body->lines;
my $text = $body->string;
my IO::Handle $file = $body->file;
$body->print(*FILE);
my $content_type = $body->type;
my $transfer_encoding = $body->transferEncoding;
my $encoded = $body->encode(mime_type => text/html,
charset => us-ascii, transfer_encoding => none);n";
my $decoded = $body->decoded;
The encoding and decoding functionality of a Mail::Message::Body is implemented in the Mail::Message::Body::Encode package. That package is automatically loaded when encoding and decoding of messages needs to take place. Methods to simply build an process body objects are implemented in Mail::Message::Body::Construct.
The body of a message (a Mail::Message object) is stored in one of the many body types. The functionality of each body type is equivalent, but there are performance differences. Each body type has its own documentation with details about its implementation.
Download (0.57MB)
Added: 2006-06-08 License: Perl Artistic License Price:
1233 downloads
Mail::Message::Head::ListGroup 2.069
Mail::Message::Head::ListGroup is a Perl module for mailinglist related header fields. more>>
Mail::Message::Head::ListGroup is a Perl module for mailinglist related header fields.
INHERITANCE
Mail::Message::Head::ListGroup
is a Mail::Message::Head::FieldGroup
is a Mail::Reporter
SYNOPSIS
my $lg = Mail::Message::Head::ListGroup->new(head => $head, ...);
$head->addListGroup($lg);
my $lg = $head->addListGroup(...);
$lg->delete;
A list group is a set of header fields which are added by mailing-list managing software. This class knowns various details about that software.
The knowledge and test messages which are used to initially implement this module is taken from Mail::ListDetector, written by Michael Stevens. The logic is redesigned to add flexibility and use the powerful MailBox features.
<<lessINHERITANCE
Mail::Message::Head::ListGroup
is a Mail::Message::Head::FieldGroup
is a Mail::Reporter
SYNOPSIS
my $lg = Mail::Message::Head::ListGroup->new(head => $head, ...);
$head->addListGroup($lg);
my $lg = $head->addListGroup(...);
$lg->delete;
A list group is a set of header fields which are added by mailing-list managing software. This class knowns various details about that software.
The knowledge and test messages which are used to initially implement this module is taken from Mail::ListDetector, written by Michael Stevens. The logic is redesigned to add flexibility and use the powerful MailBox features.
Download (0.57MB)
Added: 2006-12-19 License: GPL (GNU General Public License) Price:
1040 downloads
Mail::Message::Field 2.072
Mail::Message::Field contains one line of a message header. more>>
Mail::Message::Field contains one line of a message header.
INHERITANCE
Mail::Message::Field
is a Mail::Reporter
Mail::Message::Field is extended by
Mail::Message::Field::Fast
Mail::Message::Field::Flex
Mail::Message::Field::Full
SYNOPSIS
my $field = Mail::Message::Field->new(From => fish@tux.aq);
print $field->name;
print $field->body;
print $field->comment;
print $field->content; # body & comment
$field->print(*OUT);
print $field->string;
print "$fieldn";
print $field->attribute(charset) || us-ascii;
This implementation follows the guidelines of rfc2822 as close as possible, and may there produce a different output than implementations based on the obsolete rfc822. However, the old output will still be accepted.
These objects each store one header line, and facilitates access routines to the information hidden in it. Also, you may want to have a look at the added methods of a message:
my @from = $message->from;
my $sender = $message->sender;
my $subject = $message->subject;
my $msgid = $message->messageId;
my @to = $message->to;
my @cc = $message->cc;
my @bcc = $message->bcc;
my @dest = $message->destinations;
my $other = $message->get(Reply-To);
<<lessINHERITANCE
Mail::Message::Field
is a Mail::Reporter
Mail::Message::Field is extended by
Mail::Message::Field::Fast
Mail::Message::Field::Flex
Mail::Message::Field::Full
SYNOPSIS
my $field = Mail::Message::Field->new(From => fish@tux.aq);
print $field->name;
print $field->body;
print $field->comment;
print $field->content; # body & comment
$field->print(*OUT);
print $field->string;
print "$fieldn";
print $field->attribute(charset) || us-ascii;
This implementation follows the guidelines of rfc2822 as close as possible, and may there produce a different output than implementations based on the obsolete rfc822. However, the old output will still be accepted.
These objects each store one header line, and facilitates access routines to the information hidden in it. Also, you may want to have a look at the added methods of a message:
my @from = $message->from;
my $sender = $message->sender;
my $subject = $message->subject;
my $msgid = $message->messageId;
my @to = $message->to;
my @cc = $message->cc;
my @bcc = $message->bcc;
my @dest = $message->destinations;
my $other = $message->get(Reply-To);
Download (0.58MB)
Added: 2007-07-13 License: Perl Artistic License Price:
833 downloads
Mail::Message::Construct::Build 2.066
Mail::Message::Construct::Build is a Perl module for building a Mail::Message from components. more>>
Mail::Message::Construct::Build is a Perl module for building a Mail::Message from components.
SYNOPSIS
my $msg3 = Mail::Message->build
(From => me, data => "only twonlinesn");
my $msg4 = Mail::Message->buildFromBody($body);
Complex functionality on Mail::Message objects is implemented in different files which are autoloaded. This file implements the functionality related to building of messages from various components.
<<lessSYNOPSIS
my $msg3 = Mail::Message->build
(From => me, data => "only twonlinesn");
my $msg4 = Mail::Message->buildFromBody($body);
Complex functionality on Mail::Message objects is implemented in different files which are autoloaded. This file implements the functionality related to building of messages from various components.
Download (0.57MB)
Added: 2006-08-30 License: GPL (GNU General Public License) Price:
1150 downloads
Mail::Message::Head::FieldGroup 2.069
Mail::Message::Head::FieldGroup is a Perl module with a sub set of fields in a header. more>>
Mail::Message::Head::FieldGroup is a Perl module with a sub set of fields in a header.
INHERITANCE
Mail::Message::Head::FieldGroup
is a Mail::Reporter
Mail::Message::Head::FieldGroup is extended by
Mail::Message::Head::ListGroup
Mail::Message::Head::ResentGroup
Mail::Message::Head::SpamGroup
Some fields have a combined meaning: a set of fields which represent one intermediate step during the transport of the message (a resent group, implemented in Mail::Message::Head::ResentGroup), fields added by mailing list software (implemented in Mail::Message::Head::ListGroup), or fields added by Spam detection related software (implemented by Mail::Message::Head::SpamGroup). Each set of fields can be extracted or added as group with objects which are based on the implementation in this class.
<<lessINHERITANCE
Mail::Message::Head::FieldGroup
is a Mail::Reporter
Mail::Message::Head::FieldGroup is extended by
Mail::Message::Head::ListGroup
Mail::Message::Head::ResentGroup
Mail::Message::Head::SpamGroup
Some fields have a combined meaning: a set of fields which represent one intermediate step during the transport of the message (a resent group, implemented in Mail::Message::Head::ResentGroup), fields added by mailing list software (implemented in Mail::Message::Head::ListGroup), or fields added by Spam detection related software (implemented by Mail::Message::Head::SpamGroup). Each set of fields can be extracted or added as group with objects which are based on the implementation in this class.
Download (0.57MB)
Added: 2007-01-11 License: Perl Artistic License Price:
1016 downloads
Secleted [ 0 ] software to compare
Copyright Notice:
Software piracy is theft, Using crack, password, serial numbers, registration codes, key generators is illegal and prevent future software development. The above message queuing search only lists software in full, demo and trial versions for free download. Download links are directly from our mirror sites or publisher sites, torrent files or links from rapidshare.com, yousendit.com or megaupload.com are not allowed
