Free mathu pro crack software for linux

aircrack is a 802.11 sniffer and WEP/WPA key cracker.
It consists of: airodump (an 802.11 packet capture program), aireplay (an 802.11 packet injection program), aircrack (static WEP and WPA-PSK cracking), and airdecap (decrypts WEP/WPA capture files).
Enhancements:
- airodump: show probing clients as "not associated"
- airodump: dont substract the noise level unless madwifi
- airodump: fixed channel hopping with old orinoco
- airmon.sh: added detection of the zd1211 driver

Aircrack-ng is a set of tools for auditing wireless networks.
- airodump: 802.11 packet capture program
- aireplay: 802.11 packet injection program
- aircrack: static WEP and WPA-PSK key cracker
- airdecap: decrypts WEP/WPA capture files
Aircrack-ng is the next generation of aircrack with lots of new features.
How do I crack a static WEP key ?
The basic idea is to capture as much encrypted traffic as possible using airodump. Each WEP data packet has an associated 3-byte Initialization Vector (IV): after a sufficient number of data packets have been collected, run aircrack on the resulting capture file. aircrack will then perform a set of statistical attacks developped by a talented hacker named KoreK.
How do I know my WEP key is correct ?
There are two authentication modes for WEP:
Open-System Authentication: this is the default mode. All clients are accepted by the AP, and the key is never checked: association is always granted. However if your key is incorrect you wont be able to receive or send packets (because decryption will fail), so DHCP, ping etc. will timeout.
Shared-Key Authentication: the client has to encrypt a challenge before association is granted by the AP. This mode is flawed and leads to keystream recovery, so its never enabled by default.
In summary, just because you seem to have successfully connected to the access point doesnt mean your WEP key is correct ! To check your WEP key, try to decrypt a capture file with the airdecap program.
How many IVs are required to crack WEP ?
WEP cracking is not an exact science. The number of required IVs depends on the WEP key length, and it also depends on your luck. Usually, 40-bit WEP can be cracked with 300.000 IVs, and 104-bit WEP can be cracked with 1.000.000 IVs; if youre out of luck you may need two million IVs, or more.
Theres no way to know the WEP key length: this information is kept hidden and never announced, either in management or data packets; as a consequence, airodump can not report the WEP key length. Thus, it is recommended to run aircrack twice: when you have 250.000 IVs, start aircrack with "-n 64" to crack 40-bit WEP. Then if the key isnt found, restart aircrack (without the -n option) to crack 104-bit WEP.
Enhancements:
- This release adds an ACX injection patch, and updates the rtl8187 patch for 2.6.21.
- It fixes madwifi-ng detection with airmon-ng.
- It fixes 2 bugs in aircrack-ng related to WPA cracking.
- It fixes an old Debian bug (#417388).
- It fixes the use of wlanng, and fixes IP address writing in the CSV file with airodump-ng.
- It fixes a bug in the GUI for Windows and adds a PTW option.

Web Business Pro is a Web application designed for everyday business activities. The project includes support for customer lists, inventory, receipt printing, and accounting. Fully featured search functions and filters make it easy to find what you need quickly.

The doorman guards the door of a server, manipulating firewall rules to admit only recognized parties.
The doorman is intended to run on systems which have their firewall rules turned down tightly enough as to be effectively invisible to the outside world. The doorman adds and removes extra rules in a very controlled manner.
Using metaphor 1...
The doorman daemon "guards the door" of a host, admitting only recognized parties. It allows a server which is not intended for general public access to run with all of its TCP ports closed to the outside world. A matching "knocker" is provided, with which to persuade the doorman to open the door a crack, just wide enough for a single TCP connection from a single IP address.
And now, switching to metaphor 2... :)
A private server thus rigged for silent running has greatly enhanced security. Port scans cannot reveal its existence. Even if its existence is known by other means (or the firewall isnt all that tight), possible bugs in server code cannot be exploited; packets from unknown sources simply never get to the bug.
The current implementation of the doorman, "doormand", is suitable for protecting only TCP services on Unix-type systems. The door-knocker, "knock", can be run under Unix, GNU/Linux, or Microsoft Windows.
The doorman is based on an original idea of Martin Krzywinski, who proposed watching firewall logs for a sequence of packets directed to closed ports, which method he described in Sysadmin magazine and linuxjournal.com.
You might also visit his pages at www.portknocking.org.
This particular implementation deviates a bit from his original proposal, in that the doorman watches for only a single UDP packet. To get the doorman to open up, the packet must contain an MD5 hash which correctly hashes a shared secret, salted with a 32-bit random number, the identifying user or group-name, and the requested service port-number.
Enhancements:
- Added support for linux cooked socket header len; thanks to Markus Hoffmann.
- Fixed guestlist hostname-parsing bug; also thanks to Markus.
- Changed method of remembering old knock hashes, without use of Berkeley DB.
- Kinda-fixed a bug handling pcapnext-returns-null condition. I hope.
- Included lexer.c (flex output from lexer.l) in distribution. Duh.
- Fixed doorman bug when creating new new hashfile; thanks to Robert Koropcak
- No changes made to knock.c; however, it will report being V0.81

Datastream Pro is a database browser and SQL client for JDBC databases.
It is intuitive and easy to use.
Datastream Pro is avaliable on both Linux and Windows
Main features:
- Browse and edit the data in your database.
- Run and edit SQL scripts in a user friendly environment.
- Use the query editor to edit your SQL queries.
- Simultaneously connect to multiple databases
- Supports almost any JDBC compliant database (tested on Oracle, MySQL, postgreSQL and HSQLDb)
- Easy to use connection wizard.
- Secure, personalised settings for connections and preferences
- Built in text editor
- Reliable and stable

BuddySpace is an instant messenger with four novel twists: (1) it allows optional maps for geographical & office-plan visualizations in addition to standard buddy lists; (2) it is built on open source Jabber, which makes it interoperable with ICQ, MSN, Yahoo and others; (3) it is implemented in Java, so it is cross-platform; (4) it is built by a UK research lab, so it is 100% free with full sources readiily available. But BuddySpace is about more than just messaging, as we explain below.

One of the key factors that led to the widespread popularity of Instant Messaging applications from 1997 onwards (including ICQ, AOL, Yahoo!, MSN, Odigo, and Jabber messengers) was the concept of pushed presence: the automatic notification of the appearance of friends and colleagues online.

However, Instant Messaging (IM) is just one of many possible presence-related and presence-dependent applications. For example, presence-enabled applications can facilitate safety-tracking of children by mobile phone, support for emergency services, blind-date radar, group teleconference management, multiplayer games, and anything involving the collaboration of individuals separated in space and time.

Why phone a contact only to receive an engaged tone or pre-recorded message, when the telephone network already knows what state your contact is in, and could indicate this directly on your contact list? All of these concepts embody varying degrees of what we refer to as enhanced presence management.

The concept of presence has matured in recent years to move away from the simple notion of online/offline/away, towards a rich blend of attributes that can be used to characterise an individuals physical and/or spatial location, work trajectory, time frame of reference, mental mood, goals, and even intentions! Our challenge is how best to characterise presence, how to make it easy to manage and easy to visualise, and how to remain consistent with the users own expectations, work habits, and existing patterns of Instant Messaging and other communication tool usage.

BuddySpace generalizes the concept of Buddy List (popularised by Instant Messaging tools such as AOL Instant Messenger, ICQ, MSN Messenger, and Yahoo Messenger) to provide multiple views of collaborative workgroups according to users needs and tastes. Our aim has been to provide a personal dashboard or radar screen so that one can observe the availability and interaction state of colleagues worldwide in a manner that exhibits the following desirable properties:

* immediate: real-time updates need to be pushed instantly to users rather than pulled in by request -- the push approach helps keep updates more palpable and informative
* peripheral and therefore non-intrusive: users lead busy lives, and dislike being bombarded with yet more information, so we aim to keep awareness of colleagues available in a compact manner that can be noticed peripherally
* customisable: some people prefer simple or hierarchical lists, some prefer visual maps, some prefer status lights, and so on; some prefer a Windows look-and-feel, some a Mac-- we need to cater for diverse user preferences and capabilities
* scaleable: we have to provide ways to indicate the presence of potentially enormous numbers of people, even given that these numbers will be filtered down for personal use -- researchers inhabit workspaces with many hundreds of colleagues around the globe; the Open University has well over 150,000 students online; large peer-spaces like music swapping communities have many millions of users connected simultaneously
* interoperable: with several hundred million users of the Big Four (AIM/ICQ/MSN/Yahoo!), it is crucial that any approach allow interopebility with systems to which our users already subscribe; this is one of the many reasons we built BuddySpace entirely on top of Jabber (www.jabber.org), which provides gateways to the Big Four products.
* cross-platform: we need to service a community not only on Windows, Unix/Linux, and Mac desktop and notebook configurations, but also on PDAs and mobile phones -- we therefore develop entirely in Java
* XML-literate: for future intelligent applications, communication transport needs to be about more than just string-transmission; another we adopted Jabber is that it is based entirely on a generic XML transport architecture, ideally suited for this purpose.
* open source: for the research community to join us and to gain leverage via our research output, we have ensured that BuddySpace is open source, available on SourceForge.
* clean: BuddySpace adheres rigorously to the Jabber specification, which means that it interoperates with other Jabber clients and servers without danger of the rogue behaviour that non-standard implementations inadvertently allow (e.g. the semantics of users inhabiting multiple groups is undefined in some clients, and can cause crashes).
* extendable: BuddySpace deploys a plug-in architecture which means that additions, such as new visualizations, and new concepts such as gaming interfaces, are readily achievable

BuddySpace fulfills all the above criteria, and provides a compelling user interface that can be highly compact, yet provide users with an important feel-good factor, akin to seeing nearby office lights turned on when entering ones office building at night. By studying the semantics of presence, we can also augment the existing impoverished presence states in a principles manner, providing capabilities that are more representative of the way real users work. Forthcoming capabilities will include automatic location updates via mobile devices, and the use of semantic matchmaking via intelligent profile handling, in order to help users quickly find and filter colleagues of particular interest.

MaxDev is proud to introduce MD-Pro, the most complete, flexible and reliable CMS available on the market.
A CMS is an application that provides for the display and management of the contents of a web site. MD-Pro carries this many steps farther by making this management simple yet powerful. Your MD-Pro powered web site can be updated in seconds without any knowledge of programming or HTML. MD-Pro can be configured to allow your site users to send news, comment on existing news, vote in polls, administer their own account via a simple graphical interface and much more.
Normally you must pay for technology this simple and powerful. CMSs available today, cost from several thousand dollars to several hundred thousand dollars. Thanks to the work of many Open Source development communities however, today there are a variety of no cost CMSs published under GNU/GPL.
Open Source systems have gained popularity and matured to the point where they are used by many large companies and organizations around the world.
Main features:
Some of the entities taking advantage of Open Source systems are:
- IBM
- Oracle
- Google
- Amazon.com
- Dreamworks
- Kenwood
- Incyte Geonomica
- Ameritrade
- Pixar Animation
- Credit Suisse
- New York Stock Exchange
- PWL Euro-Subsidies (The Hague)
- United States Army
- NASA
- European Commission
- Mexico City
- China
- And many more...
MD-Pro provides an Open Source CMS "certified" and guaranteed by a highly qualified staff of developers. MD-Pro has been developed to be more versatile and modular than competing CMSs.. It is comprised of a highly optimized core platform, to which you can add additional modules according to the needs of your site and users. Not only are there a variety of third party modules available, you are free to develop or contract the development of customized modules and features to fit your needs.
These are just some of the modules currently available:
e-Commerce
- osCommerce (electronic shopping system)
- pnSubscriptions (site subscriptions, donations, PayPal payments, etc.)
- Stock_Quotes (for stock exchange)
Collaboration and productivity
- Project management
- Task organizers
- Calendars
Virtual community and multi-media
- Image galleries
- Discussion forums
- Chat
Webmaster tools
- Advanced menu system
- Advanced statistics
- Server tools
Other
- Polls
- Forms management
- Newsletter
- Distance learning

Ophcrack is a Windows password cracker based on rainbow tables. It is a very efficient implementation of rainbow tables done by the inventors of the method.
The project comes with a GTK+ Graphical User Interface and runs on Windows, Mac OS X (Intel CPU) as well as on Linux.
Main features:
- Runs on Windows, Linux and Mac OS X (intel).
- Cracks LM and NTLM hashes.
- Free tables available for alphanumeric LM hashes.
- Loads hashes from local SAM, remote SAM.
- Loads hashes from encrypted SAM recovered from a Windows partition.
The ophcrack LiveCD contains a full linux system (SLAX), ophcrack for linux and rainbow tables for alphanumerical passwords.
The liveCD cracks passwords automatically, no installation necessary, no admin passwort necessary (as long as you can boot from cd).
Enhancements:
- Vista support with the latest version of ophcrack (2.3.4)
- Easier to changes tables