Free low sodium foods software for linux

Low Resolution Modeline Calculator is a modeline calculator for legacy CRT displays, including TVs, arcade monitors, and VGA monitors.
Low Resolution Modeline Calculator can also be used to calculate low resolution modelines for modern multisync PC monitors.
As its name implies, it is not designed for calculating large resolutions, resolutions that operate over 65kHz.
Options:
-v, --vsync
Calculate the nearest mode in vertical synchronization.
-b, --bestscan
Calculate the nearest best scan mode.
-i, --interlace
Include support for interlaced calculations. Interlaced modes are not supported by many video cards. You should only enable this option if you know your video card supports them.
-d, --doublescan
Include support for doublescanned calculations. Doublescanned modes are not supported by many video cards. You should only enable this option if you know your video card supports them.
-n, --nostretch
Do not stretch modes that are out of range for your monitor. You should use this option if you know that your application does not support integer stretching.
-y, --ystretch
Assume fractional stretching of the y-resolution. You should use this option if you know that your application supports fractional stretching of the y-resolution and you want to stretch an underscanned mode so that it fills the entire screen.
-l, --lowpclock
Many video cards do not reliably support pixel clocks lower than 8mHz. If you know that your video card and its driver support pixel clocks lower than 8mHz, then you should use this option.
-h, --highpclock
Most X11 video card drivers do not support pixel clocks lower than 12mHz. In some cases your video card may not support pixel clocks lower than 12mHz either (rare). If you know that your video card (or your video card driver) does not support pixel clocks lower than 12mHz, then you should use this option.
-3x4
Stretch the horizontal resolution so that the mode has a 3:4 aspect ratio. You can use this option to correctly display vertical resolutions on a horizontal monitor.
-x, --X11R6
Print modeline in X11 format (default).
-f, --fb
Print modeline in fbset format.
-a, --advmame
Print modeline in AdvanceMAME format.
-s, --SDL
Print modeline in X11 format to stdout and print AdvanceMAME X11 configuration to stderr.
-p, --powerstrip
Print modeline in PowerStrip format.
-pal
Calculate modelines for a PAL Television (15.625kHz).
-ntsc
Calculate modelines for a NTSC Television (15.73426kHz).
-cga
Calculate modelines for a standard resolution arcade monitor (15.7500kHz).
-ega
Calculate modelines for a medium resolution arcade monitor (24.960kHz).
-vga
Calculate modelines for a standard VGA monitor (31.500kHz).
-d9200
Calculate modelines for a Wells-Gardner 9200 arcade monitor (15kHz, 25kHz, 31kHz).
-multi
Calculate modelines for a Multisync PC monitor (default)
Enhancements:
- The --reference option works correctly.
- The DOS version compiles with libxml.

Watsup is a system and process monitor for CPU, memory, page faults, disk IO, network IO.
Low overhead. GUI controls. Formatted report in window. Sample interval down to 0.1 secs. Choose font size. System resources: CPU (1-4), memory (free/used/cache), page faults (hard/soft), disk IO, network IO. Process resources: same + execution file name.
Main features:
- overhead is about 1/3 as much
- sample interval as low as 0.1 seconds is supported
- overall system and top process resources are shown on one page
- disk I/O, network I/O, and page fault rates can be monitored
- font can be made small (for display in a corner) or large (whole screen)
- the top N processes are displayed with minimal jumping around between samples
- (which makes it easier to watch one or a few processes)
- process ranking is a weighted sum of CPU, hard page faults, and disk I/O

Webconverger project is an evolution of the hybrid client for deployments in places like offices or Internet cafes where only Web applications are used.
Unlike thin or hybrid clients, Webconverger is faster and more responsive by providing a Web browser that runs locally.
Main features:
- Ideal just for Web applications
- Free & open software
- Low system requirements
- Good security
- Painless to deploy and setup
- Features a Web standards compliant browser
- Cost effective
- Does not require registration or accounts
- Flash and a PDF viewer installed by default
- Easy for new users to learn and use
- Low maintenance costs
- Long term support
Enhancements:
- The latest security updates to Iceweasel (Firefox) rebuild 2.0.0.6 have been applied.
- Previous versions of Webconverger will upgrade nonetheless with somewhat delayed startups.

DIMVisual stands for Data Integration Model for Visualization. The implementation allows the integration of information to the analysis of parallel application behavior.
If you have an parallel application with low performance and want to find out what is the problem you can use this project to integrate traces of your application with metrics collected by monitoring tools that you might already using.
DIMVisual project intends to show an integrated visualization of these information.
Enhancements:
- This release features support for MPE (from MPI communication libraries) traces, Performance Co-Pilot traces, and initial support for Ganglia, DNFSP, and DECK traces.

Nameko was born as a simple PHP webmail. Now Nameko is much more than this: its a set of classes to manage e-mail with PHP.
The project can retrieve message from a POP3 server, parse e-mails, send email through SMTP server, and so on.
The mail parser was totally rewritten from the original version: now its greatly improved, and it can read every kind of email.
The Nameko webmail has also been totally rewritten: now it has a great interface, fast, powerful, with a lot of advanced tools.
Each component of the webmail is customizable, with a sort of plug-ins system: you can add only the plug-ins for the functions you really need.
The basic version on Nameko is always a one-file script: so simple tu set up!
Enhancements:
- This release include great performance improvements, making parsing also of heavy email (> 50MB) much faster.
- It includes some code cleanup and small bugfixes.

Mono is an excercise in subtractive synthesis. My intent is to write a bandlimited oscillator, a 4-pole low-pass filter and an envelope generator that run in real-time, and to have a TB-303-
inspired graphical user interface on top of that. As of now, the audio configuration process is not so nice and you have to be a nerd in order to succeed.
Main features:
- oscillator (though not yet properly bandlimited)
- 4-pole all-pole low-pass filter
- ADR envelope generator
- single pattern sequencer
- butt-ugly GUI
- real-time audio output on Linux, IRIX and Solaris